Alkali-leaching and acid-leaching were proposed for the dephosphorization of Changde iron ore, which contains an average of 1.12% for phosphorus content. Sodium hydroxide, sulfuriced, hydrochloric and nitric acids wer...Alkali-leaching and acid-leaching were proposed for the dephosphorization of Changde iron ore, which contains an average of 1.12% for phosphorus content. Sodium hydroxide, sulfuriced, hydrochloric and nitric acids were used for the preparation of leach solutions. The results show that phosphorus occurring as apatite phase could be removed by alkali-leaching, but those occurring in the iron phase could not. Sulfuric acid is the most effective among the three kinds of acid. 91.61% phosphorus removal was attained with 1% sulfuric acid after leaching for 20 rain at room temperature. Iron loss during acid-leaching can be negligible, which was less than 0.25%.The pH value of solution after leaching with1% sulfuric acid was about 0.86, which means acid would not be exhausted during the process and it could be recycled, and the recycle of sulfuric acid solution would make the dephosphorization process more economical.展开更多
The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluori...The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluorine-based chemical method, was carried out under crucial factors such as different HF/ore ratios(1:1-3:1 g/mL) and leaching temperatures(50-85℃). The kinetics data fit well with the developed shrinking-core model, indicating that the leaching rate of Li was controlled by the chemical reaction and inner diffusion at the beginning of leaching(0-30 min) as a calculated apparent activation energy(Ea) of 20.62 kJ/mol. The inner diffusion became the rate-limiting step as the leaching continues(60-180 min). Moreover, effects of HF/ore ratio and leaching temperature on selective leaching behavior of Li, Al and Si were discussed. 90% of fluorine mainly existed as HF/F-in leaching solution, which can provide theoretical guidance for further removal or recovery of F.展开更多
Based on the existing form of Zn2 Si O4 in willemite, the chemical precipitation method was used to synthesize Zn2 Si O4.Through the orthogonal experimentation, the reaction conditions of melten Na OH decomposing Zn2 ...Based on the existing form of Zn2 Si O4 in willemite, the chemical precipitation method was used to synthesize Zn2 Si O4.Through the orthogonal experimentation, the reaction conditions of melten Na OH decomposing Zn2 Si O4 were optimized, and the optimal experimental conditions include reaction temperature of 400 °C, reaction time of 4 h, and alkaline-to-ore molar ratio of 20:1.Based on the optimized experiment, on-line detection for the alkali leaching was made by using Raman spectroscopy; XRD was used to analyze the structure of water leaching residue, to explore the reaction mechanism of Na OH decomposing Zn2 Si O4. The results show that during the reaction process, the Si — O bond in Si O4 is destroyed, and the Na OH inserts itself into the silicate lattice,producing an immediate Na2 Zn Si O4 product. After the alkali leaching process, Zn2+ can be separated from the Si O4 array, which can be released out of the silicate in the form of ZnO.展开更多
基金Project (50321402) supported by the National Natural Science Foundation of China project(2004CB619204) supported by Major State Basic Research Development Program of China
文摘Alkali-leaching and acid-leaching were proposed for the dephosphorization of Changde iron ore, which contains an average of 1.12% for phosphorus content. Sodium hydroxide, sulfuriced, hydrochloric and nitric acids were used for the preparation of leach solutions. The results show that phosphorus occurring as apatite phase could be removed by alkali-leaching, but those occurring in the iron phase could not. Sulfuric acid is the most effective among the three kinds of acid. 91.61% phosphorus removal was attained with 1% sulfuric acid after leaching for 20 rain at room temperature. Iron loss during acid-leaching can be negligible, which was less than 0.25%.The pH value of solution after leaching with1% sulfuric acid was about 0.86, which means acid would not be exhausted during the process and it could be recycled, and the recycle of sulfuric acid solution would make the dephosphorization process more economical.
基金Project(51474237)supported by the National Natural Science Foundation of China
文摘The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluorine-based chemical method, was carried out under crucial factors such as different HF/ore ratios(1:1-3:1 g/mL) and leaching temperatures(50-85℃). The kinetics data fit well with the developed shrinking-core model, indicating that the leaching rate of Li was controlled by the chemical reaction and inner diffusion at the beginning of leaching(0-30 min) as a calculated apparent activation energy(Ea) of 20.62 kJ/mol. The inner diffusion became the rate-limiting step as the leaching continues(60-180 min). Moreover, effects of HF/ore ratio and leaching temperature on selective leaching behavior of Li, Al and Si were discussed. 90% of fluorine mainly existed as HF/F-in leaching solution, which can provide theoretical guidance for further removal or recovery of F.
基金Project(2007CB613603)supported by the National Basic Research Program of ChinaProject(51204037)supported by the National Natural Science Foundation of China
文摘Based on the existing form of Zn2 Si O4 in willemite, the chemical precipitation method was used to synthesize Zn2 Si O4.Through the orthogonal experimentation, the reaction conditions of melten Na OH decomposing Zn2 Si O4 were optimized, and the optimal experimental conditions include reaction temperature of 400 °C, reaction time of 4 h, and alkaline-to-ore molar ratio of 20:1.Based on the optimized experiment, on-line detection for the alkali leaching was made by using Raman spectroscopy; XRD was used to analyze the structure of water leaching residue, to explore the reaction mechanism of Na OH decomposing Zn2 Si O4. The results show that during the reaction process, the Si — O bond in Si O4 is destroyed, and the Na OH inserts itself into the silicate lattice,producing an immediate Na2 Zn Si O4 product. After the alkali leaching process, Zn2+ can be separated from the Si O4 array, which can be released out of the silicate in the form of ZnO.
