期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于角加速度滤波的柔性杆臂补偿方法 被引量:5
1
作者 丛明宇 丁鹏 +1 位作者 戴志军 程向红 《中国惯性技术学报》 EI CSCD 北大核心 2022年第4期421-428,共8页
针对基于柔性杆臂传递对准方案中的杆臂加速度构建时,角加速度提取噪声大的问题,提出利用跟踪微分器求取角加速度信号,以补偿杆臂挠曲一体化模型中的杆臂加速度误差。通过将子惯导角速率及其跟踪的微分结果作为模型分量,进而推导建立了... 针对基于柔性杆臂传递对准方案中的杆臂加速度构建时,角加速度提取噪声大的问题,提出利用跟踪微分器求取角加速度信号,以补偿杆臂挠曲一体化模型中的杆臂加速度误差。通过将子惯导角速率及其跟踪的微分结果作为模型分量,进而推导建立了考虑柔性杆臂的传递对准模型。仿真表明基于角加速度滤波的方法可以获得平滑的角加速度信息,基于柔性杆臂补偿的传递对准模型,可以实现三轴安装误差估计精度平均提高22.3%,姿态失准角估计精度平均提高4.6%,所提出的方法具有一定的工程适用性。 展开更多
关键词 传递对准 柔性杆臂 跟踪微分器 加速度滤波
在线阅读 下载PDF
基于机器视觉的旋转机械微小振动放大方法实验研究
2
作者 赵乐 段承杰 +3 位作者 丁鹏 翟立宏 张铭光 马波 《机电工程》 北大核心 2025年第1期42-50,共9页
基于机器视觉的旋转机械微小振动放大过程中,未能将大运动和微小运动分离,导致其放大结果会产生伪影。针对这一问题,提出了一种基于加速度滤波和振幅阈值滤波的微小振动放大方法。首先,采用了复值可操纵金字塔分解图像,将图像信号转变... 基于机器视觉的旋转机械微小振动放大过程中,未能将大运动和微小运动分离,导致其放大结果会产生伪影。针对这一问题,提出了一种基于加速度滤波和振幅阈值滤波的微小振动放大方法。首先,采用了复值可操纵金字塔分解图像,将图像信号转变为局部相位信号和局部幅值信号;然后,采用了加速度滤波算法从局部相位信号中分离出线性大运动信号,采用了振幅阈值滤波算法分离了非线性大运动信号,得到了微小振动信号,并对其进行了放大;最后,对放大信号和局部幅值信号采用复值可操纵金字塔逆变换重构了图像,构建了转子实验台,对上述微小振动放大方法的有效性进行了验证。研究结果表明:测点在水平和垂直方向上的振动位移幅值均低于0.15 mm,在局部放大图中可以明显分辨出低于5 Hz的转子基频信号,且其余频率成分未被放大。该方法在微小振动放大处理前增加大运动和微小振动分离过程,仅对微小振动进行处理,能够减少大运动对微小振动信号放大产生的干扰,有效改善了微小振动放大结果中的伪影问题。 展开更多
关键词 机械振动 去伪影 复值可操纵金字塔 加速度滤波 振幅阈值滤波 图像重构 非线性大运动和微小运动分离
在线阅读 下载PDF
Observer-based hybrid control algorithm for semi-active suspension systems 被引量:2
3
作者 REN Hong-bin CHEN Si-zhong +2 位作者 ZHAO Yu-zhuang LIU Gang YANG Lin 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第9期2268-2275,共8页
In order to improve ride comfort and handling performance of the vehicle, an adaptive hybrid control algorithm is proposed for semi-active suspension systems. The virtues of sky-hook is combined with ground-hook contr... In order to improve ride comfort and handling performance of the vehicle, an adaptive hybrid control algorithm is proposed for semi-active suspension systems. The virtues of sky-hook is combined with ground-hook control strategies and a more suitable compromise for the suspension systems is chosen. The hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high speed conditions. Damping continuous adjustable absorber is used to continuously control the damping force so as to eliminate the damping force jerk instead of traditional on-off control policy. Based on suspension stroke measured by sensors, unscented Kalman filter is designed to estimate the suspension states in real-time for the realization of hybrid control, which improves the robustness of the control strategy and is adaptive to different types of road profiles. Finally, the proposed control algorithm is validated under the following two typical road profiles: half-sine speed bump road and the random road. The simulation results indicate that the hybrid control algorithm could offer a good coordination between ride comfort and handling of the vehicle. 展开更多
关键词 semi-active suspension hybrid control unscented Kalman filter (UKF)
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部