期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
导电沥青混合料力电特性多尺度优化机制研究
1
作者 徐涛 王鹏 +4 位作者 魏弘瑞 张齐超 董晓康 郑祺栋 李璐 《应用化工》 北大核心 2025年第4期970-975,982,共7页
导电沥青混合料具有可调控力电特性的关键是导电相多级网络,现有关于导电网络的研究尺度较窄,不能满足多尺度场景使用需求。为实现导电沥青混合料力电性能的平衡,使用微米级的石墨粉与毫米级的碳纤维和铁尾矿对导电网络进行多尺度优化... 导电沥青混合料具有可调控力电特性的关键是导电相多级网络,现有关于导电网络的研究尺度较窄,不能满足多尺度场景使用需求。为实现导电沥青混合料力电性能的平衡,使用微米级的石墨粉与毫米级的碳纤维和铁尾矿对导电网络进行多尺度优化与力电特性提升,采用车辙实验与Comsol Multiphysics软件模拟,分析力电场作用下导电颗粒位移与电场线分布对电阻变化的影响。结果表明,添加24%石墨+1.4%碳纤维+6%铁尾矿的混合料电阻率在10Ω·m左右,且车辙变形较低;掺碳纤维的混合料性能存在变异区间,即有效碳纤维网络的数量与碳纤维的掺量不符合正相关性;Comsol Multiphysics模型中导电颗粒在荷载作用下产生位移改变了电场线的分布,模拟的电阻-变形趋势与车辙实验实测结果具有相关性。 展开更多
关键词 导电沥青混合料 导电网络 多尺度 力电特性
在线阅读 下载PDF
MWCNT/EP膜片的力电特性和无线应变传感器
2
作者 徐强 袁卫锋 《西南石油大学学报(自然科学版)》 CAS CSCD 北大核心 2021年第6期94-101,共8页
将多壁碳纳米管(MWCNT)添加到环氧树脂(EP)中,其随机分布会形成一个复杂的导电网络。由于MWCNT在EP基体中的形状各异,个体或曲或直,相互之间或分离或交叉,使得MWCNT/EP纳米复合材料具备了电感、电阻和电容的特性。本研究提出了MWCNT/EP... 将多壁碳纳米管(MWCNT)添加到环氧树脂(EP)中,其随机分布会形成一个复杂的导电网络。由于MWCNT在EP基体中的形状各异,个体或曲或直,相互之间或分离或交叉,使得MWCNT/EP纳米复合材料具备了电感、电阻和电容的特性。本研究提出了MWCNT/EP纳米复合材料的RLC内部等效电路,测试了0.6 wt.%MWCNT/EP纳米复合材料薄膜对电磁信号的响应。研究发现,MWCNT/EP纳米复合材料薄膜可在特定频率的电磁波激励下产生谐振,且谐振频率随着纳米复合材料的应变发生偏移,从而证明了利用MWCNT/EP纳米复合材料制备无线应变传感器的可行性。通过对MWCNT/EP纳米复合材料薄膜的力电特性实验和理论分析,提出了开发标签式射频应变传感器的思路。 展开更多
关键词 多壁碳纳米管 无线传感 频移 力电特性 应变传感器
在线阅读 下载PDF
CFRP约束高强混凝土方柱机敏特性的试验研究
3
作者 卢明 王震宇 《震灾防御技术》 CSCD 2013年第3期231-243,共13页
通过将铜丝编织在碳纤维片材中作为电极,监测了棱柱体试件的应力-应变曲线试验过程中碳纤维片材的电阻变化规律。分析监测结果表明,碳纤维具有较好的力电感知特性,利用碳纤维电阻变化率的规律,可以定性的判断内部混凝土的受力状态、破... 通过将铜丝编织在碳纤维片材中作为电极,监测了棱柱体试件的应力-应变曲线试验过程中碳纤维片材的电阻变化规律。分析监测结果表明,碳纤维具有较好的力电感知特性,利用碳纤维电阻变化率的规律,可以定性的判断内部混凝土的受力状态、破碎程度、试件的破坏位置和约束应力沿周向的分布特点,以及各层碳纤维布的破坏顺序和共同工作程度。 展开更多
关键词 碳纤维片材 应力-应变曲线 力电感知特性
在线阅读 下载PDF
Aging Characteristics of Lithium-Ion Battery Under Fast Charging Based on Electrochemical-thermalmechanical Coupling Model
4
作者 Dong-Xu Zuo Pei-Chao Li 《电化学(中英文)》 CAS 北大核心 2024年第9期10-24,共15页
The aging characteristics of lithium-ion battery(LIB)under fast charging is investigated based on an electrochemical-thermal-mechanical(ETM)coupling model.Firstly,the ETM coupling model is established by COMSOL Multip... The aging characteristics of lithium-ion battery(LIB)under fast charging is investigated based on an electrochemical-thermal-mechanical(ETM)coupling model.Firstly,the ETM coupling model is established by COMSOL Multiphysics.Subsequently,a long cycle test was conducted to explore the aging characteristics of LIB.Specifically,the effects of charging(C)rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface(SEI),SEI formation,thermal stability and stress characteristics.The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI,and thus a consequent increase in the capacity loss due to the SEI formation.Meanwhile,the increases in C rate and cycle number also led to an increase in the heat generation and a decrease in the heat dissipation rate of the battery,respectively,which result in a decrease in the thermal stability of the electrode materials.In addition,the von Mises stress of the positive electrode material is higher than that of the negative electrode material as the cycling proceeds,with the positive electrode material exhibiting tensile deformation and the negative electrode material exhibiting compressive deformation.The available lithium ion concentration of the positive electrode is lower than that of the negative electrode,proving that the tensile-type fracture occurring in the positive material under long cycling dominated the capacity loss process.The aforementioned studies are helpful for researchers to further explore the aging behavior of LIB under fast charging and take corresponding preventive measures. 展开更多
关键词 Lithium-ion battery Aging characteristics Fast charging Electrochemical-thermal-mechanical coupling model
在线阅读 下载PDF
Characteristics for wind energy and wind turbines by considering vertical wind shear 被引量:8
5
作者 郑玉巧 赵荣珍 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2393-2398,共6页
The probability distributions of wind speeds and the availability of wind turbines were investigated by considering the vertical wind shear. Based on the wind speed data at the standard height observed at a wind farm,... The probability distributions of wind speeds and the availability of wind turbines were investigated by considering the vertical wind shear. Based on the wind speed data at the standard height observed at a wind farm, the power-law process was used to simulate the wind speeds at a hub height of 60 m. The Weibull and Rayleigh distributions were chosen to express the wind speeds at two different heights. The parameters in the model were estimated via the least square(LS) method and the maximum likelihood estimation(MLE) method, respectively. An adjusted MLE approach was also presented for parameter estimation. The main indices of wind energy characteristics were calculated based on observational wind speed data. A case study based on the data of Hexi area, Gansu Province of China was given. The results show that MLE method generally outperforms LS method for parameter estimation, and Weibull distribution is more appropriate to describe the wind speed at the hub height. 展开更多
关键词 Weibull distribution wind power vertical wind shear power-law process parameter estimation
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部