期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
铂电阻高精度非线性校正及其在智能仪表中的实现 被引量:39
1
作者 杨永竹 《仪表技术与传感器》 CSCD 北大核心 2000年第8期44-46,共3页
以铂电阻分度函数为基础 ,给出了 2种高精度非线性校正的算法 ,其结果已在智能仪表中得到应用 ,并达到良好的效果。
关键词 铂电阻 非线性校正 分度函数 智能仪表
在线阅读 下载PDF
采用时域与时频域联合特征空间的转子系统碰磨故障诊断 被引量:26
2
作者 赵柄锡 冀大伟 +2 位作者 袁奇 李浦 葛庆 《西安交通大学学报》 EI CAS CSCD 北大核心 2020年第1期75-84,共10页
针对转子系统早期碰磨故障,提出了一种基于时域和时频域联合特征提取和分析的方法,并采用该方法对简单转子模型进行了故障诊断。基于BP神经网络和影响函数法,建立了滑动轴承单盘转子碰磨故障动力学模型,并对转子系统碰磨故障进行了数值... 针对转子系统早期碰磨故障,提出了一种基于时域和时频域联合特征提取和分析的方法,并采用该方法对简单转子模型进行了故障诊断。基于BP神经网络和影响函数法,建立了滑动轴承单盘转子碰磨故障动力学模型,并对转子系统碰磨故障进行了数值模拟;分别采用统计学和小波包分解方法,对振动信号的时域和时频域特征进行了提取,综合两者建立了碰磨故障的特征空间,并采用支持向量机(SVM)模型对比分析了基于时域、时频域和综合两者特征空间的故障诊断效果,在此基础上,通过引入可分度函数,将正常振动信号与故障信号同时考虑,对各特征的可分度进行了分析和排序;根据特征分析结果,将特征空间分为高可分度区域和低可分度区域,分别针对单特征和组合特征对碰磨故障进行识别。研究结果表明:单特征的碰磨故障识别率与其可分度函数值呈正相关;组合特征识别效果要优于单特征,且高可分度区域内的组合特征识别效果要明显优于低可分度区域,针对本文所建碰磨故障样本空间,高可分度区域内随机三特征组合平均故障识别率达到90%以上。文中提出的故障特征提取和分析方法可为复杂故障的识别提供参考。 展开更多
关键词 碰磨故障诊断 时域分析 时频域分析 分度函数
在线阅读 下载PDF
Improved response surface method and its application in stability reliability degree analysis of tunnel surrounding rock 被引量:10
3
作者 苏永华 张鹏 赵明华 《Journal of Central South University of Technology》 EI 2007年第6期870-876,共7页
An approach of limit state equation for surrounding rock was put forward based on deformation criterion. A method of symmetrical sampling of basic random variables adopted by classical response surface method was mend... An approach of limit state equation for surrounding rock was put forward based on deformation criterion. A method of symmetrical sampling of basic random variables adopted by classical response surface method was mended, and peak value and deflection degree of basic random variables distribution curve were took into account in the mended sampling method. A calculation way of probability moment, based on mended Rosenbluth method, suitable for non-explicit performance function was put forward. The first, second, third and fourth order moments of functional function value were calculated by mended Rosenbluth method through the first, second, third and fourth order moments of basic random variable. A probability density the function(PDF) of functional function was deduced through its first, second, third and fourth moments, the PDF in the new method took the place of the method of quadratic polynomial to approximate real functional function and reliability probability was calculated through integral by the PDF for random variable of functional function value in the new method. The result shows that the improved response surface method can adapt to various statistic distribution types of basic random variables, its calculation process is legible and need not itemtive circulation. In addition, a stability probability of surrounding rock for a tunnel was calculated by the improved method, whose workload is only 30% of classical method and its accuracy is comparative. 展开更多
关键词 response surface method Rosenbluth method statistic moment entropy density function quadratic polynomial
在线阅读 下载PDF
Effects of homogeneous-heterogeneous reactions in flow of Powell-Eyring fluid 被引量:1
4
作者 T.Hayat M.Imtiaz A.Alsaedi 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第8期3211-3216,共6页
The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced t... The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced to the ordinary differential equations by similarity transformations. The analytic solutions are presented in series forms by homotopy analysis method(HAM). Convergence of the obtained series solutions is explicitly discussed. The physical significance of different parameters on the velocity and concentration profiles is discussed through graphical illustrations. It is noticed that the boundary layer thickness increases by increasing the Powell-Eyring fluid material parameter(ε) whereas it decreases by increasing the fluid material parameter(δ). Further, the concentration profile increases when Powell-Eyring fluid material parameters increase. The concentration is also an increasing function of Schmidt number and decreasing function of strength of homogeneous reaction. Also mass transfer rate increases for larger rate of heterogeneous reaction. 展开更多
关键词 Powell-Eyring fluid boundary layer flow stretching sheet homogeneous-heterogeneous reactions
在线阅读 下载PDF
A strip thickness prediction method of hot rolling based on D_S information reconstruction 被引量:1
5
作者 孙丽杰 邵诚 张利 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2192-2200,共9页
To improve prediction accuracy of strip thickness in hot rolling, a kind of Dempster/Shafer(D_S) information reconstitution prediction method(DSIRPM) was presented. DSIRPM basically consisted of three steps to impleme... To improve prediction accuracy of strip thickness in hot rolling, a kind of Dempster/Shafer(D_S) information reconstitution prediction method(DSIRPM) was presented. DSIRPM basically consisted of three steps to implement the prediction of strip thickness. Firstly, iba Analyzer was employed to analyze the periodicity of hot rolling and find three sensitive parameters to strip thickness, which were used to undertake polynomial curve fitting prediction based on least square respectively, and preliminary prediction results were obtained. Then, D_S evidence theory was used to reconstruct the prediction results under different parameters, in which basic probability assignment(BPA) was the key and the proposed contribution rate calculated using grey relational degree was regarded as BPA, which realizes BPA selection objectively. Finally, from this distribution, future strip thickness trend was inferred. Experimental results clearly show the improved prediction accuracy and stability compared with other prediction models, such as GM(1,1) and the weighted average prediction model. 展开更多
关键词 grey relational degree GM(1 1) model Dempster/Shafer (D_S) method least square method thickness prediction
在线阅读 下载PDF
Effect of composition and aging time on hardness and wear behavior of Cu-Ni-Sn spinodal alloy 被引量:3
6
作者 S.ILANGOVAN R.VAIRA VIGNESH +1 位作者 R.PADMANABAN J.GOKULACHANDRAN 《Journal of Central South University》 SCIE EI CAS CSCD 2019年第10期2634-2642,共9页
Copper alloyed with various compositions of nickel and tin were cast into molds under argon atmosphere.The cast rods were homogenized,solution heat treated,followed by aging for different time duration.The specimens w... Copper alloyed with various compositions of nickel and tin were cast into molds under argon atmosphere.The cast rods were homogenized,solution heat treated,followed by aging for different time duration.The specimens were characterized for microstructure and tested for microhardness and wear rate.A hybrid model with a linear function and radial basis function was developed to analyze the influence of nickel,tin,and aging time on the microhardness and tribological behavior of copper-nickel-sin alloy system.The results indicate that increase in the composition of nickel and tin increases the microhardness and decreases the wear rate of the alloy.The increase in the concentration of nickel and tin decreases the peak aging time of the alloy system. 展开更多
关键词 spinodal decomposition MICROHARDNESS WEAR radial basis function model
在线阅读 下载PDF
A compound objective reconfiguration of distribution networks using hierarchical encoded particle swarm optimization 被引量:3
7
作者 WEN Juan TAN Yang-hong +1 位作者 JIANG Lin XU Zu-hua 《Journal of Central South University》 SCIE EI CAS CSCD 2018年第3期600-615,共16页
With the development of automation in smart grids,network reconfiguration is becoming a feasible approach for improving the operation of distribution systems.A novel reconfiguration strategy was presented to get the o... With the development of automation in smart grids,network reconfiguration is becoming a feasible approach for improving the operation of distribution systems.A novel reconfiguration strategy was presented to get the optimal configuration of improving economy of the system,and then identifying the important nodes.In this strategy,the objectives increase the node importance degree and decrease the active power loss subjected to operational constraints.A compound objective function with weight coefficients is formulated to balance the conflict of the objectives.Then a novel quantum particle swarm optimization based on loop switches hierarchical encoded was employed to address the compound objective reconfiguration problem.Its main contribution is the presentation of the hierarchical encoded scheme which is used to generate the population swarm particles of representing only radial connected solutions.Because the candidate solutions are feasible,the search efficiency would improve dramatically during the optimization process without tedious topology verification.To validate the proposed strategy,simulations are carried out on the test systems.The results are compared with other techniques in order to evaluate the performance of the proposed method. 展开更多
关键词 distribution network reconfiguration node importance degree compound objective function hierarchical encoded
在线阅读 下载PDF
A novel scale-free network model based on clique growth 被引量:1
8
作者 王波 杨旭华 王万良 《Journal of Central South University》 SCIE EI CAS 2009年第3期474-477,共4页
A novel scale-flee network model based on clique (complete subgraph of random size) growth and preferential attachment was proposed. The simulations of this model were carried out. And the necessity of two evolving ... A novel scale-flee network model based on clique (complete subgraph of random size) growth and preferential attachment was proposed. The simulations of this model were carried out. And the necessity of two evolving mechanisms of the model was verified. According to the mean-field theory, the degree distribution of this model was analyzed and computed. The degree distribution function of vertices of the generating network P(d) is 2m^2m1^-3(d-m1 + 1)^-3, where m and m1 denote the number of the new adding edges and the vertex number of the cliques respectively, d is the degree of the vertex, while one of cliques P(k) is 2m^2Ek^-3, where k is the degree of the clique. The simulated and analytical results show that both the degree distributions of vertices and cliques follow the scale-flee power-law distribution. The scale-free property of this model disappears in the absence of any one of the evolving mechanisms. Moreover, the randomicity of this model increases with the increment of the vertex number of the cliques. 展开更多
关键词 SCALE-FREE clique growth preferential attachment degree distribution
在线阅读 下载PDF
An algorithm for moving target detection in IR image based on grayscale distribution and kernel function 被引量:6
9
作者 王鲁平 张路平 +1 位作者 赵明 李飚 《Journal of Central South University》 SCIE EI CAS 2014年第11期4270-4278,共9页
A fast algorithm based on the grayscale distribution of infrared target and the weighted kernel function was proposed for the moving target detection(MTD) in dynamic scene of image series. This algorithm is used to de... A fast algorithm based on the grayscale distribution of infrared target and the weighted kernel function was proposed for the moving target detection(MTD) in dynamic scene of image series. This algorithm is used to deal with issues like the large computational complexity, the fluctuation of grayscale, and the noise in infrared images. Four characteristic points were selected by analyzing the grayscale distribution in infrared image, of which the series was quickly matched with an affine transformation model. The image was then divided into 32×32 squares and the gray-weighted kernel(GWK) for each square was calculated. At last, the MTD was carried out according to the variation of the four GWKs. The results indicate that the MTD can be achieved in real time using the algorithm with the fluctuations of grayscale and noise can be effectively suppressed. The detection probability is greater than 90% with the false alarm rate lower than 5% when the calculation time is less than 40 ms. 展开更多
关键词 moving target detection gray-weighted kernel function dynamic background
在线阅读 下载PDF
Fuzzy logic controller design with unevenly-distributed membership function for high performance chamber cooling system 被引量:2
10
作者 曹健鹏 Seok-Kwon Jeong Young-Mi Jung 《Journal of Central South University》 SCIE EI CAS 2014年第7期2684-2692,共9页
Fuzzy logic controller adopting unevenly-distributed membership function was presented with the purpose of enhancing performance of the temperature control precision and robustness for the chamber cooling system.Histo... Fuzzy logic controller adopting unevenly-distributed membership function was presented with the purpose of enhancing performance of the temperature control precision and robustness for the chamber cooling system.Histogram equalization and noise detection were performed to modify the evenly-distributed membership functions of error and error change rate into unevenly-distributed membership functions.Then,the experimental results with evenly and unevenly distributed membership functions were compared under the same outside environment conditions.The experimental results show that the steady-state error is reduced around 40% and the noise disturbance is rejected successfully even though noise range is 60% of the control precision range.The control precision is improved by reducing the steady-state error and the robustness is enhanced by rejecting noise disturbance through the fuzzy logic controller with unevenly-distributed membership function.Moreover,the system energy efficiency and lifetime of electronic expansion valve(EEV) installed in chamber cooling system are improved by adopting the unevenly-distributed membership function. 展开更多
关键词 chamber cooling system fuzzy logic controller unevenly-distributed membership function steady-state error reduction ROBUSTNESS variable speed refrigeration system
在线阅读 下载PDF
Analysis of inhibition of concrete steel-rebar corrosion by Na_2Cr_2O_7 concentrations:Implications for conflicting reports on inhibitor effectiveness 被引量:1
11
作者 J.O.Okeniyi I.O.Oladele +4 位作者 I.J.Ambrose S.O.Okpala O.M.Omoniyi C.A.Loto A.P.I.Popoola 《Journal of Central South University》 SCIE EI CAS 2013年第12期3697-3714,共18页
Corrosion test data were measured using non-destructive electrochemical techniques and analysed for studying inhibition effectiveness by different concentrations of NazCr207 on the corrosion of concrete steel-rehar in... Corrosion test data were measured using non-destructive electrochemical techniques and analysed for studying inhibition effectiveness by different concentrations of NazCr207 on the corrosion of concrete steel-rehar in NaC1 and in H2SO4 media. For these, specifications of ASTM G16-95 R04 were combined with the normal and the Gumbel probability density functions as model analytical methods for addressing issues of conflicting reports of inhibitor effectiveness that had generated concerns. Results show that reinforced concrete samples admixed with concentrations having 4 g (0.012 7 tool), 8 g (0.025 4 mol) and 6 g (0.019 l tool) NaaCr207 exhibited, in that order, high inhibition effectiveness, with respective efficiency, r/, of (90.46±1.30)%, (88.41+2.24)% and (84.87±4.74)%, in the NaC1 medium. These exhibit good agreements within replicates and statistical methods for the samples. Also, optimal inhibition effectiveness model in the H2SO4 medium was exhibited by 8 g (0.025 4 mol) Na2Cr207 concentration having r/=(78.44±1.10)%. These bear implications for addressing conflicting test data in the study of effective inhibitors for mitigating steel-rebar corrosion in aggressive environments. 展开更多
关键词 corrosion inhibitor effectiveness saline/marine and industrial/microbial environments concrete steel-rebar normal andGumbel probability distribution functions Kolmogorov-Smirnov statistics tests of significance
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部