期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
含锌炼钢炉粉高温焙烧脱氯的冶金动力学 被引量:2
1
作者 董凯 王宏阳 《工业加热》 CAS 2019年第3期27-30,共4页
在对炼钢粉尘物理、化学特性和脱氯反应机理分析的基础上,设计了炼钢炉粉高温焙烧脱氯动力学的积分研究方法,并对炼钢粉尘进行了750、800、900℃的高温焙烧脱氯热态试验。得出炼钢粉尘焙烧脱氯反应级数为1/2,进而计算出活化能、频率因... 在对炼钢粉尘物理、化学特性和脱氯反应机理分析的基础上,设计了炼钢炉粉高温焙烧脱氯动力学的积分研究方法,并对炼钢粉尘进行了750、800、900℃的高温焙烧脱氯热态试验。得出炼钢粉尘焙烧脱氯反应级数为1/2,进而计算出活化能、频率因子和氯元素脱出率随焙烧时间变化的函数,通过验证,平均误差为1.41%。研究结果表明:随着焙烧温度提高,粉尘脱氯效果越明显,粉尘脱氯合格所需的时间明显缩短。在900℃和950℃温度下焙烧,炼钢粉尘脱氯合格的时间分别为90min和32min。 展开更多
关键词 冶金动力学 脱氯 焙烧 炼钢粉尘
在线阅读 下载PDF
冶金动力学研究生优质课程建设
2
作者 王维 陈位杰 《中国冶金教育》 2017年第6期88-89,共2页
阐述了河南科技大学冶金工程专业研究生冶金动力学优质课程建设项目实施中更新教学内容、改革教学方法及完善教学条件等措施,提高了研究生创新能力。
关键词 研究生优质课 课程建设 冶金动力学 教学方法
在线阅读 下载PDF
冶金熔池搅拌的流动和传质
3
作者 曲英 Oeter,F 《冶金丛刊》 1993年第4期13-22,共10页
关键词 熔池 搅拌 流动 传质 冶金动力学
在线阅读 下载PDF
一、二类边界条件下扩散方程的一个稳态近似结果
4
作者 王成善 穆小静 《中南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2013年第7期2712-2719,共8页
将动力学处理非稳态问题的浓度随时间不变的稳态假设发展为浓度变化率随时间不变的稳态假设,对有限长度区间内扩散方程进行稳态近似法处理,获得一、二类边界条件下扩散方程的一个稳态近似解。并将其与精确数值解对比。研究结果表明:稳... 将动力学处理非稳态问题的浓度随时间不变的稳态假设发展为浓度变化率随时间不变的稳态假设,对有限长度区间内扩散方程进行稳态近似法处理,获得一、二类边界条件下扩散方程的一个稳态近似解。并将其与精确数值解对比。研究结果表明:稳态近似法获得的结果和精确解随时间变化是同步的,利用近似解可以准确地预测达到最终稳态的时间;近似解与接近最终稳态的情形吻合程度好,与远离最终稳态的情形吻合程度较差;稳态近似法获得的结果基本上满足总体质量守恒。 展开更多
关键词 冶金动力学 扩散方程 非稳态 稳态法 近似分析解
在线阅读 下载PDF
基于隐Markov模型的高炉铁水硅质量分数预测算法 被引量:1
5
作者 曾九孙 刘祥官 +1 位作者 郜传厚 罗世华 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2008年第5期742-746,共5页
为正确预测高炉铁水中硅的质量分数([Si]),提出了一种基于隐Markov模型(HMM)的预测算法.从高炉冶金反应动力学出发,分析了高炉内反应的链接关系,这种链接关系和HMM的原理是一致的.在对系统参数初始化之后,利用重估公式对参数进行训练直... 为正确预测高炉铁水中硅的质量分数([Si]),提出了一种基于隐Markov模型(HMM)的预测算法.从高炉冶金反应动力学出发,分析了高炉内反应的链接关系,这种链接关系和HMM的原理是一致的.在对系统参数初始化之后,利用重估公式对参数进行训练直至收敛,从而得到系统模型.通过Viterbi算法找出所有训练样本的最大可能状态路径,并计算其似然值.将新样本输入模型得到新的状态路径及其似然值,从训练样本中找出具有相同状态路径或最小偏差似然值的序列,以训练样本下一[Si]值作为新样本下一时刻的预测值.利用该算法对高炉实际生产数据进行仿真,结果表明,与传统的人工神经网络方法相比,该方法能够有效提高预测精度和效率. 展开更多
关键词 高炉炼铁 冶金反应动力学 隐MARKOV模型 数据模式
在线阅读 下载PDF
跟踪学科发展前沿 培养与国际接轨的高层次人才
6
作者 肖兴国 邹宗树 +1 位作者 彭一川 肖泽强 《中国冶金教育》 1997年第2期29-31,共3页
关键词 培养 高层次人才 钢铁冶金技术 钢铁冶金工艺 冶金传输理论 冶金宏观动力学 冶金教育
在线阅读 下载PDF
Study on hydrometallurgical process and kinetics of manganese extraction from low-grade manganese carbonate ores 被引量:6
7
作者 Liu Youcai Lin Qingquan +4 位作者 Li Lifeng Fu Jiangang Zhu Zhongsi Wang Chongqing Qian Dong 《International Journal of Mining Science and Technology》 SCIE EI 2014年第4期567-571,共5页
In order to utilize low-grade manganese ore resources effectively, a hydrometallurgical process was developed for manganese extraction in dilute sulfuric acid medium, and the kinetics of leaching manga- nese was also ... In order to utilize low-grade manganese ore resources effectively, a hydrometallurgical process was developed for manganese extraction in dilute sulfuric acid medium, and the kinetics of leaching manga- nese was also investigated. At room temperature, manganese from low-grade manganese carbonate ores was extracted by sulfuric acid leaching without reductants. During the extracting process, single-factor analysis method was used to evaluate the effects of grinding fineness, sulfuric acid concentration, liquid-to-solid ratio, agitation rate and leaching time on the leaching efficiencies of Mn and Fe. The optimal leaching conditions are determined as coarse particles of below 2 mm size (without ball-milling), sulfuric acid concentration of 0.86 mol/L, liquid-to-solid ratio of 5:1, agitation rate of 150 r/rain and leaching for 180 min at room temperature. Under the optimal conditions, the leaching efficiencies of Mn and Fe are 96.21g and 13.35%, respectively. In addition, through the experiments at different temper- atures, it is found that the leaching process follows the shrinking core model under the conditions of changing acid concentration and intermittent reaction device. Moreover, the apparent activations of effective diffusion and chemical reaction in the kinetic model are calculated to be 18.83 and 27.15 kJ/mol, respectively. 展开更多
关键词 Low-grade manganese ore Leaching Kinetics Model
在线阅读 下载PDF
Leaching kinetics in cyanide media of Ag contained in the industrial mining-metallurgical wastes in the state of Hidalgo, Mexico 被引量:1
8
作者 Juan Hernandez Francisco Patino +4 位作者 Isauro Rivera Iván Alejandro Reyes Misrael Uriel Flores Julio Cesar Juarez Martín Reyes 《International Journal of Mining Science and Technology》 SCIE EI 2014年第5期689-694,共6页
The leaching kinetics in cyanide media of the silver contained in the Dos Carlos waste tailings at the City of Pachuca de Soto, Hidalgo State, Mexico were carried out. The used material contained the following chemica... The leaching kinetics in cyanide media of the silver contained in the Dos Carlos waste tailings at the City of Pachuca de Soto, Hidalgo State, Mexico were carried out. The used material contained the following chemical composition: 56 10-6of Ag, 0.6 10 6of Au and 70.43%(by weight) of SiO2; 7.032%(by weight) of Al2O3; 2.69%(by weight) of Fe; 0.46%(by weight) of Mn; 3.98%(by weight) of K2O; 3.34%(by weight) of CaO; 2.50%(by weight) of Na2O; 0.04%(by weight) of Zn; 0.026%(by weight) of Pb. The mineralogical phases present were the following: Silica, albite, argentite, berlinite, orthoclase, potassium jarosite, and natrojarosite. In the leaching kinetics in cyanide media, and under the studied conditions,the effect of the CN concentration on the reaction rate has no effect on the whole process of alkaline cyanidation, of which the reaction order is n 0. Temperature has an effect on the cyanidation rate of the reaction, with an activation energy of 47.9 KJ/mol. At the same time, when the particle size decreases there is an increase in the reaction rate, which is inversely proportional to the particle diameter; when increasing the NaOH concentration there is an increase in the reaction rate Kexp, with a reaction order(n) of 0.215 under the studied ranges. 展开更多
关键词 Silver Waste tailings Cyanidation Leaching
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部