上海软X射线自由电子激光装置(Shanghai Soft X-ray Free Electron Laser,SXFEL)需1个分辨率达到亚μm量级的束流位置测量系统,并采用基于束流准直的方法实现波荡器段电子束与光子束的紧密重合。为此设计研制了1个由C波段腔式探头、单...上海软X射线自由电子激光装置(Shanghai Soft X-ray Free Electron Laser,SXFEL)需1个分辨率达到亚μm量级的束流位置测量系统,并采用基于束流准直的方法实现波荡器段电子束与光子束的紧密重合。为此设计研制了1个由C波段腔式探头、单路混频至低中频的射频前端以及自主研发的专用数字信号束流位置处理器(digital beam position monitor processor,DBPM)构成的腔式束流位置测量(cavity beam position monitor,CBPM)系统。本文对系统的设计、软硬件结构、系统搭建进行了介绍,并基于漂移段搭建的3个紧邻的CBPM阵列完成了在线系统性能评估。束流实验结果表明,在束团电荷量为500 pC、系统动态范围在±800μm的条件下,位置分辨率可达880 nm,这也是国内首次研制成功可在线运行的具有亚μm位置分辨率的CBPM系统。此外,采用CBPM的相位腔进行相对束团电荷量、束团到达时间的测量,其性能评估结果也均优于SXFEL设计要求。展开更多
加速器驱动次临界系统注入器Ⅰ,包括ECR离子源、低能传输线、射频四极加速单元、中能传输段和超导腔,注入器Ⅰ出口能够获得能量10 Me V的强流质子束流。为了调束和运行的需要,注入器Ⅰ将安装束流位置测量、束流截面测量、束流流强测量...加速器驱动次临界系统注入器Ⅰ,包括ECR离子源、低能传输线、射频四极加速单元、中能传输段和超导腔,注入器Ⅰ出口能够获得能量10 Me V的强流质子束流。为了调束和运行的需要,注入器Ⅰ将安装束流位置测量、束流截面测量、束流流强测量、束流发射度和能量测量,以及束流损失测量等束流参数测量装置。介绍了这些束流测量系统设计及其他方面的一些考虑。展开更多
Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal...Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal processing system for fast data acquisition solution when designing a cavity BPM.Also,methods for extracting the position information from cavity pickup signals and calibration algorithm are included in this solution.展开更多
A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods...A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods should be studied to achieve optimum performance. Different sampling modes were used and compared through tests. Long term variation among four sampling channels, which would introduce errors in beam position measurement, is investigated. An interleaved distribution scheme was designed to address this issue. To evaluate the sampling methods, in-beam tests were conducted in SSRF. Test results indicate that with proper sampling methods, a turn-by-turn(TBT) position resolution better than 1 μm is achieved, and the slow-acquisition(SA) position resolution is improved from 4.28 μm to 0.17 μm.展开更多
文摘上海软X射线自由电子激光装置(Shanghai Soft X-ray Free Electron Laser,SXFEL)需1个分辨率达到亚μm量级的束流位置测量系统,并采用基于束流准直的方法实现波荡器段电子束与光子束的紧密重合。为此设计研制了1个由C波段腔式探头、单路混频至低中频的射频前端以及自主研发的专用数字信号束流位置处理器(digital beam position monitor processor,DBPM)构成的腔式束流位置测量(cavity beam position monitor,CBPM)系统。本文对系统的设计、软硬件结构、系统搭建进行了介绍,并基于漂移段搭建的3个紧邻的CBPM阵列完成了在线系统性能评估。束流实验结果表明,在束团电荷量为500 pC、系统动态范围在±800μm的条件下,位置分辨率可达880 nm,这也是国内首次研制成功可在线运行的具有亚μm位置分辨率的CBPM系统。此外,采用CBPM的相位腔进行相对束团电荷量、束团到达时间的测量,其性能评估结果也均优于SXFEL设计要求。
基金supported by National Natural Science Foundation of China(1120517211475204)
文摘加速器驱动次临界系统注入器Ⅰ,包括ECR离子源、低能传输线、射频四极加速单元、中能传输段和超导腔,注入器Ⅰ出口能够获得能量10 Me V的强流质子束流。为了调束和运行的需要,注入器Ⅰ将安装束流位置测量、束流截面测量、束流流强测量、束流发射度和能量测量,以及束流损失测量等束流参数测量装置。介绍了这些束流测量系统设计及其他方面的一些考虑。
基金Supported by National Natural Science Foundation(Grant No.11075198)
文摘Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal processing system for fast data acquisition solution when designing a cavity BPM.Also,methods for extracting the position information from cavity pickup signals and calibration algorithm are included in this solution.
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KJCX2-YW-N27)National Natural Science Foundation of China(Nos.11205153 and 11175176)
文摘A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods should be studied to achieve optimum performance. Different sampling modes were used and compared through tests. Long term variation among four sampling channels, which would introduce errors in beam position measurement, is investigated. An interleaved distribution scheme was designed to address this issue. To evaluate the sampling methods, in-beam tests were conducted in SSRF. Test results indicate that with proper sampling methods, a turn-by-turn(TBT) position resolution better than 1 μm is achieved, and the slow-acquisition(SA) position resolution is improved from 4.28 μm to 0.17 μm.
