期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
光纤折射率传感器的设计制备与应用研究
1
作者 曾晓琳 李建鹏 +3 位作者 官静雯 康佳静 孙秀晶 刘晓昱 《光通信技术》 北大核心 2016年第1期22-25,共4页
利用倏逝波原理制备了光纤折射率传感器。实验测量了不同腐蚀深度下环境折射率与输出光功率的关系,以及光源波长为1550.0nm和1310.0nm时环境折射率与输出光功率的关系。通过侧边腐蚀制备了D型光纤和D型光纤折射率传感器,对比了全面腐蚀... 利用倏逝波原理制备了光纤折射率传感器。实验测量了不同腐蚀深度下环境折射率与输出光功率的关系,以及光源波长为1550.0nm和1310.0nm时环境折射率与输出光功率的关系。通过侧边腐蚀制备了D型光纤和D型光纤折射率传感器,对比了全面腐蚀和侧边腐蚀制备的光纤折射率传感器。 展开更多
关键词 光纤折射率传感器 全面腐蚀 腐蚀深度 波长 侧边腐蚀 D型光纤
在线阅读 下载PDF
多芯光纤构成的光纤折射率传感器 被引量:5
2
作者 董航宇 孙四梅 +3 位作者 江超 夏果 刘继兵 胡义慧 《激光杂志》 北大核心 2018年第10期14-17,共4页
提出了一种基于多芯光纤马赫-曾德尔干涉仪(MZI)的新型光纤折射率传感器。利用光在单模光纤、多芯光纤与多模光纤中相互耦合形成稳定的透射干涉图谱,利用透射图谱随环境折射率的线性变化进行折射率测量。采用Na Cl溶液进行了液体折射... 提出了一种基于多芯光纤马赫-曾德尔干涉仪(MZI)的新型光纤折射率传感器。利用光在单模光纤、多芯光纤与多模光纤中相互耦合形成稳定的透射干涉图谱,利用透射图谱随环境折射率的线性变化进行折射率测量。采用Na Cl溶液进行了液体折射率测量实验。实验发现:传感器透射谱的谐振峰值强随着Na Cl溶液折射率呈线性变化,传感器折射率灵敏度达到4.997d B/RIU(RIU为折射率单位)。设计的光纤折射率传感器具有结构紧凑、制备简单、成本低和灵敏度较高等优点,在工业、国防、日常生活等方面有广泛的应用前景。 展开更多
关键词 光纤折射率传感器 多模光纤 多芯光纤 折射率
在线阅读 下载PDF
基于细芯光纤结构的表面等离子体共振折射率传感器 被引量:3
3
作者 王雨 韩飞 +1 位作者 郎婷婷 赵春柳 《光通信技术》 北大核心 2019年第8期32-34,共3页
表面等离子体共振(SPR)传感器常用的光纤处理方法易使光纤结构脆弱,从而导致机械性能下降,提出了一种基于细芯光纤(TCF)SPR原理的折射率传感器.通过使用单侧均匀涂覆金(Au)膜的多模光纤-细芯光纤-多模光纤(MMF-TCF-MMF)结构作为传感单元... 表面等离子体共振(SPR)传感器常用的光纤处理方法易使光纤结构脆弱,从而导致机械性能下降,提出了一种基于细芯光纤(TCF)SPR原理的折射率传感器.通过使用单侧均匀涂覆金(Au)膜的多模光纤-细芯光纤-多模光纤(MMF-TCF-MMF)结构作为传感单元,折射率传感器能够在1.34~1.4161的范围内达到3045.69 nm/RIU的衰减谷宽度灵敏度和48.09 dB/RIU的能量损耗灵敏度;在1.34~1.3797的范围内达到112.21 nm/RIU的SPR峰波长灵敏度和-86.27 dB/RIU的SPR峰值灵敏度.实验结果表明:与传统SPR传感器相比,该传感器易制备,且机械稳定性和灵敏度高. 展开更多
关键词 表面等离子体共振 细芯光纤 折射率光纤传感器
在线阅读 下载PDF
PLASMA RESONANCE FIBER OPTIC SENSOR FOR CURE MONITORING OF EPOXY COMPOSITE
4
作者 邱浩 梁大开 +1 位作者 张焕春 经亚枝 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2001年第2期182-187,共6页
The plasma resonance fiber optic sensor has a research values in theory and is widely used in engineering because of its simple structure and high sensitivity. It is a simple and sensitive method to measure the refrac... The plasma resonance fiber optic sensor has a research values in theory and is widely used in engineering because of its simple structure and high sensitivity. It is a simple and sensitive method to measure the refractive index with optical fiber plasma wave. We make use of this characteristic to manufacture the plasma resonance fiber optic sensor which can detect the cure of epoxy compo site. We study the method of testing the solutions which have different refractive index with plasma resonance fiber optic sensor. A fiber optic sensing probe which has reliable performance and convenient operation for detecting the refractive index has been designed. The system for detecting the solution refractive index is developed and used to measure the refractive index of epoxy during the different phases in the cure process. Result shows that this system is credible and stable, the parameters tested are in accord with the facts. 展开更多
关键词 plasma wave fiber optic sensor refractive index EPOXY cure detecting
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部