ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction ...ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and luminescence spectrophotometry were employed to characterize the crystal phases, particle sizes and luminescence properties of the as-prepared nanopowders. The results indicate that all the prepared samples crystallize in a hexagonal wurtzite structure. The ZnO：La3＋,Li＋ prepared by citric acid-assisted co-precipitation method has a particle size of about 80 nm, which is the smallest among all the samples. Fluorescence （FL） spectra of all samples exhibit three typical emissions： a violet one centered at around 400 nm, blue around 450 nm and 466 rim, and weak green near 520 nm. But the samples prepared by co-precipitation method show a strong and wide green light emission located at about 500 nm. The ZnO：La3＋,Li＋ nanoparticles synthesized by the co-precipitation method demonstrate relatively the strongest emission intensity.展开更多
Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydr...Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.展开更多
基金Project(50972166) supported by the National Natural Science Foundation of China
文摘ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and luminescence spectrophotometry were employed to characterize the crystal phases, particle sizes and luminescence properties of the as-prepared nanopowders. The results indicate that all the prepared samples crystallize in a hexagonal wurtzite structure. The ZnO：La3＋,Li＋ prepared by citric acid-assisted co-precipitation method has a particle size of about 80 nm, which is the smallest among all the samples. Fluorescence （FL） spectra of all samples exhibit three typical emissions： a violet one centered at around 400 nm, blue around 450 nm and 466 rim, and weak green near 520 nm. But the samples prepared by co-precipitation method show a strong and wide green light emission located at about 500 nm. The ZnO：La3＋,Li＋ nanoparticles synthesized by the co-precipitation method demonstrate relatively the strongest emission intensity.
基金Project(50704036) supported by the National Natural Science Foundation of ChinaProject(08JJ3027) supported by the Natural Science Foundation of Hunan Province, China
文摘Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.
