Multistage centrifugal impellers with four different skew angles were investigated by using computational fluid dynamics.The purpose of this work is to investigate the influences of lean angle at the blade tip of the ...Multistage centrifugal impellers with four different skew angles were investigated by using computational fluid dynamics.The purpose of this work is to investigate the influences of lean angle at the blade tip of the impeller inlet.Four variations of lean angles,that is,8°,10°,15° and 20°,were made at first stage impeller.Reynolds Average Navier Stokes equation was used in simulation together with a shear?stress transport(SST) k-w turbulence model and mixing-plane approach,respectively.Three dimensional fluid flows were simplified using periodic model to reduce the computational cost and time required.A good performance was expected that the secondary flow can be effectively reduced in the flow passage of the impeller without excessive increase in manufacturing cost caused by the secondary flow.The results show that secondary flow affects the main flow intricately to form vortices or having non-uniform velocity in the flow passage,which in turn results in substantial fluid energy loss not only in the impeller but also in the guide vane downstream of impeller.The numerical solutions were performed and allowed the optimum design and operating conditions to be obtained.展开更多
In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by th...In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by the clamping segment of anchor was studied. Taking the deformation of all parts in clamping segment in the transverse direction into consideration, the calculation formula for the increment of anchoring force was proposed based on the linear elastic hypotheses. The proposed model is verified by experiments and conclusions are drawn that the anchoring force is influenced mainly by the inclination angle of clamping pieces, the length of clamping part and the thickness of bonding medium. Especially, the thickness of bonding medium should be lowered in design to improve the synergistic effect of anchors.展开更多
基金Project(NRF-2010-013-D00007) supported by the National Research Foundation of KoreaWork finacially supported by the 2010 Research Professor Fund of Gyeongsang National University,Korea
文摘Multistage centrifugal impellers with four different skew angles were investigated by using computational fluid dynamics.The purpose of this work is to investigate the influences of lean angle at the blade tip of the impeller inlet.Four variations of lean angles,that is,8°,10°,15° and 20°,were made at first stage impeller.Reynolds Average Navier Stokes equation was used in simulation together with a shear?stress transport(SST) k-w turbulence model and mixing-plane approach,respectively.Three dimensional fluid flows were simplified using periodic model to reduce the computational cost and time required.A good performance was expected that the secondary flow can be effectively reduced in the flow passage of the impeller without excessive increase in manufacturing cost caused by the secondary flow.The results show that secondary flow affects the main flow intricately to form vortices or having non-uniform velocity in the flow passage,which in turn results in substantial fluid energy loss not only in the impeller but also in the guide vane downstream of impeller.The numerical solutions were performed and allowed the optimum design and operating conditions to be obtained.
基金Project(BK20140553)supported by Jiangsu Province Science Foundation for Youths,ChinaProject(51478209)supported by the National Natural Science Foundation of China
文摘In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by the clamping segment of anchor was studied. Taking the deformation of all parts in clamping segment in the transverse direction into consideration, the calculation formula for the increment of anchoring force was proposed based on the linear elastic hypotheses. The proposed model is verified by experiments and conclusions are drawn that the anchoring force is influenced mainly by the inclination angle of clamping pieces, the length of clamping part and the thickness of bonding medium. Especially, the thickness of bonding medium should be lowered in design to improve the synergistic effect of anchors.
