According to the interaction of three shallow tunnels with large section, the analytical solution to rock pressure has been derived and discussed. The load model is given when the bilateral tunnels are excavated. Acco...According to the interaction of three shallow tunnels with large section, the analytical solution to rock pressure has been derived and discussed. The load model is given when the bilateral tunnels are excavated. According to the model, the stresses of three tunnels and single tunnel are calculated and compared to analyze the distribution characteristics, where the stresses are influenced by controlling factors of clear distance, covering depth and inclination angle of ground surface. The results show that, in general, the bias distribution is more serious. Therefore, it is significant to settle down the load model of three shallow tunnels so as to determine the measure of reinforcement and design the structure of support. The model and results can be used as a theoretical basis in designation and further research of the three shallow tunnels.展开更多
A detailed analysis of mode II stress intensity factors(SIFs) for the double edge cracked Brazilian disk subjected to different diametral compression is presented using a weight function method. The mode II SIFs at cr...A detailed analysis of mode II stress intensity factors(SIFs) for the double edge cracked Brazilian disk subjected to different diametral compression is presented using a weight function method. The mode II SIFs at crack tips can be obtained by simply calculating an integral of the product of mode II weight function and the shear stress on the prospective crack faces of uncracked disk loaded by a diametral compression. A semi-analytical formula for the calculation of normalized mode II SIF, f _Ⅱ, is derived for different crack lengths (from 0.1 to 0.7) and inclination angles (from 10° to 75°) with respect to loading direction. Comparison between the obtained results and finite element method solutions shows that the weight function method is of high precision. Combined with the authors previous work on mode I fracture analysis, the new specimen geometry can be used to study fracture through any combination of mode I and mode II loading by a simple alignment of the crack relative to the diameter of compression loading, and to obtain pure mode II crack extension. Another advantage of this specimen geometry is that it is available directly from rock core and is also easy to fabricate.展开更多
The traditional stability analysis method of geogrid reinforced slopes does not consider the effect of lateral swelling,so it is not applicable to reinforced expansive soil slopes.This paper reports a new stability an...The traditional stability analysis method of geogrid reinforced slopes does not consider the effect of lateral swelling,so it is not applicable to reinforced expansive soil slopes.This paper reports a new stability analysis method for geogrid reinforced expansive soil slopes.The additional pullout force of the free zone due to the lateral swelling and the anti-pullout safety factor of each geogrid layer were obtained by ensuring the overall stability of the reinforced slope.The optimum design was carried out to treat an expansive soil cut slope in Hubei Province,China,by changing the spacing and length of geogrid reinforcement.Calculation results show that the additional pullout force caused by lateral swelling has a great influence on the anti-pullout stability of geogrids,and the local stability of the reinforced slope will be overestimated if the swelling effect of soil in the free zone is not considered.展开更多
In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulati...In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulation researches were carried out based on the model. The results indicate that both drum level and drum length have functional relations with period of drum level wave action and sloshing. When the drum level decreases or drum length increases, the period of drum level wave action and sloshing increases, density of liquid and number of sub-module division have little influence on the period of drum level wave action and sloshing. The model was validated by the analytical solution theory of liquid’s wave action and sloshing in cuboid container, and the 3D graphics of drum level wave action and sloshing was also obtained. The model can dynamically reflect the rules of wave action and sloshing of water in the container exactly.展开更多
To make sure the intermediate products of the carbothermic reduction of Al2O3 process, such as Al4CO4, Al2CO and Al4C3,and the interaction of AlCl, AlCl2, AlCl3 with Al4CO4, Al2CO and Al4C3, respectively, thermodynami...To make sure the intermediate products of the carbothermic reduction of Al2O3 process, such as Al4CO4, Al2CO and Al4C3,and the interaction of AlCl, AlCl2, AlCl3 with Al4CO4, Al2CO and Al4C3, respectively, thermodynamic analyses were used to study the chloride reaction production of them under the vacuum situation. The stable structures and electronic properties of AlCl, AlCl2 and AlCl3 adsorbed on Al4CO4, Al2CO and Al4C3 were calculated by first-principles calculations by the CASTEP module in the Materials Studio program. The results show that the AlCl3 and AlCl2 molecules have decomposed on the plane of Al4C3（001）, while there are no obvious decomposition of AlCl3 and AlCl2 on Al4CO4（001） and Al2CO（001） planes. The adsorption of AlCl on the Al4CO4（001）and Al2CO（001） planes is stronger than that on the Al4C3（001） plane. The interaction strength of AlCl3, as well as AlCl2, with Al4CO4,Al2CO and Al4C3 is in the sequence of Al4CO4Al2CO〉Al4C3.展开更多
V-shape hulls are widely used in peacekeeping efforts such as demining vehicles in order to deflect the blast energy and reduce the effects of mine blast. Blast resistant design and energy absorption enhancement of V-...V-shape hulls are widely used in peacekeeping efforts such as demining vehicles in order to deflect the blast energy and reduce the effects of mine blast. Blast resistant design and energy absorption enhancement of V-shape plates were carried out using finite element analysis package ABAQUS. Various geometries of V-shape plates with and without interlayer of materials like Al-foams and honeycomb were employed to analyze their effects on the deformation of the plate and applied stresses and strains. The results obtained show that application of metallic foams leads to better response of the plate and consequently results in more energy dissipation, less dame to vehicle and enhances crew survivability.展开更多
基金Projects(2013CB036004, 2011CB013800) supported by the National Basic Research Program of ChinaProject(51178468, 50908234) supported by the National Natural Science Foundation of ChinaProject(2011G103-B) supported by the Science and Technology Development of Railway in China
文摘According to the interaction of three shallow tunnels with large section, the analytical solution to rock pressure has been derived and discussed. The load model is given when the bilateral tunnels are excavated. According to the model, the stresses of three tunnels and single tunnel are calculated and compared to analyze the distribution characteristics, where the stresses are influenced by controlling factors of clear distance, covering depth and inclination angle of ground surface. The results show that, in general, the bias distribution is more serious. Therefore, it is significant to settle down the load model of three shallow tunnels so as to determine the measure of reinforcement and design the structure of support. The model and results can be used as a theoretical basis in designation and further research of the three shallow tunnels.
文摘A detailed analysis of mode II stress intensity factors(SIFs) for the double edge cracked Brazilian disk subjected to different diametral compression is presented using a weight function method. The mode II SIFs at crack tips can be obtained by simply calculating an integral of the product of mode II weight function and the shear stress on the prospective crack faces of uncracked disk loaded by a diametral compression. A semi-analytical formula for the calculation of normalized mode II SIF, f _Ⅱ, is derived for different crack lengths (from 0.1 to 0.7) and inclination angles (from 10° to 75°) with respect to loading direction. Comparison between the obtained results and finite element method solutions shows that the weight function method is of high precision. Combined with the authors previous work on mode I fracture analysis, the new specimen geometry can be used to study fracture through any combination of mode I and mode II loading by a simple alignment of the crack relative to the diameter of compression loading, and to obtain pure mode II crack extension. Another advantage of this specimen geometry is that it is available directly from rock core and is also easy to fabricate.
基金Project(51978085)supported by the National Natural Science Foundation of ChinaProject(201808430102)supported by the China Scholarship Council+1 种基金Project(JTG-201507)supported by the Highway Industry Standard Compilation Project of Ministry of Transportation,ChinaProject(kfj180102)supported by the Open Fund of Changsha University of Science&Technology,China。
文摘The traditional stability analysis method of geogrid reinforced slopes does not consider the effect of lateral swelling,so it is not applicable to reinforced expansive soil slopes.This paper reports a new stability analysis method for geogrid reinforced expansive soil slopes.The additional pullout force of the free zone due to the lateral swelling and the anti-pullout safety factor of each geogrid layer were obtained by ensuring the overall stability of the reinforced slope.The optimum design was carried out to treat an expansive soil cut slope in Hubei Province,China,by changing the spacing and length of geogrid reinforcement.Calculation results show that the additional pullout force caused by lateral swelling has a great influence on the anti-pullout stability of geogrids,and the local stability of the reinforced slope will be overestimated if the swelling effect of soil in the free zone is not considered.
基金Project(200310) supported by Edison Research Foundation from General Electric (GE) in USAProject(59976022) supported by the National Natural Science Foundation of China
文摘In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulation researches were carried out based on the model. The results indicate that both drum level and drum length have functional relations with period of drum level wave action and sloshing. When the drum level decreases or drum length increases, the period of drum level wave action and sloshing increases, density of liquid and number of sub-module division have little influence on the period of drum level wave action and sloshing. The model was validated by the analytical solution theory of liquid’s wave action and sloshing in cuboid container, and the 3D graphics of drum level wave action and sloshing was also obtained. The model can dynamically reflect the rules of wave action and sloshing of water in the container exactly.
基金Projects(51104078,51264023)supported by the National Natural Science Foundation of ChinaProject(2010CD022)supported by Yunnan Provincial Applied Basic Research Fund,China+2 种基金Project(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of ChinaProject(U1202271)supported by the National Natural Science Foundation of China-Yunnan United FundProject(KKZ3201252020)supported by Fund of Kunming University of Science and Technology for Talent Training,China
文摘To make sure the intermediate products of the carbothermic reduction of Al2O3 process, such as Al4CO4, Al2CO and Al4C3,and the interaction of AlCl, AlCl2, AlCl3 with Al4CO4, Al2CO and Al4C3, respectively, thermodynamic analyses were used to study the chloride reaction production of them under the vacuum situation. The stable structures and electronic properties of AlCl, AlCl2 and AlCl3 adsorbed on Al4CO4, Al2CO and Al4C3 were calculated by first-principles calculations by the CASTEP module in the Materials Studio program. The results show that the AlCl3 and AlCl2 molecules have decomposed on the plane of Al4C3（001）, while there are no obvious decomposition of AlCl3 and AlCl2 on Al4CO4（001） and Al2CO（001） planes. The adsorption of AlCl on the Al4CO4（001）and Al2CO（001） planes is stronger than that on the Al4C3（001） plane. The interaction strength of AlCl3, as well as AlCl2, with Al4CO4,Al2CO and Al4C3 is in the sequence of Al4CO4Al2CO〉Al4C3.
文摘V-shape hulls are widely used in peacekeeping efforts such as demining vehicles in order to deflect the blast energy and reduce the effects of mine blast. Blast resistant design and energy absorption enhancement of V-shape plates were carried out using finite element analysis package ABAQUS. Various geometries of V-shape plates with and without interlayer of materials like Al-foams and honeycomb were employed to analyze their effects on the deformation of the plate and applied stresses and strains. The results obtained show that application of metallic foams leads to better response of the plate and consequently results in more energy dissipation, less dame to vehicle and enhances crew survivability.
