Our study was carried out to assess the level of noise generated and ground vibrations induced during blasting operations at the Ewekoro limestone quarry in Nigeria.To achieve this objective,vibro monitor equipment wa...Our study was carried out to assess the level of noise generated and ground vibrations induced during blasting operations at the Ewekoro limestone quarry in Nigeria.To achieve this objective,vibro monitor equipment was used to take readings related to noise generated and ground vibrations during all blasting operations that took place in the quarry for a period of one month.As well,a digital camera was used to take photographs of residential structures within villages near the quarry.The results obtained indicate that the ground vibration readings fall between 0.5 mm/s and 2.1 mm/s and the noise generated during the blasting operations between 82 dB and 89 dB.These readings when compared with the limits set by FEPA(Federal Environmental Protection Agency) of 5.0 mm/s and 150 dB) all fall within the permissible limits.However the photographs of most structures near the quarry reveal cracks and dilapidated building walls.Recommendations are made on how to sustain and improve current blasting techniques.展开更多
In the present paper, the effect of a small bottom tmdulation of the sea bed in the form of periodic bed form on the surface waves generated due to a rolling oscillation of a vertical barrier either partially immersed...In the present paper, the effect of a small bottom tmdulation of the sea bed in the form of periodic bed form on the surface waves generated due to a rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of non uniform finite depth is investigated. A simplified perturbation technique involving a non dimensional parameter characterizing the smallness of the bottom deformation is applied to reduce the given boundary value problem to two independent boundary value problems upto first order. The first boundary value problem corresponds to the problem of water wave generation due to rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of uniform finite depth. This is a well known problem whose solution is available in the literature. From the second boundary value problem, the first order correction to the wave amplitude at infinity is evaluated in terms of the shape function characterizing the bottom undulation, by employing Green＇s integral theorem. For a patch of sinusoidal ripples at the sea bottom, the first order correction to the wave amplitude at infinity for both the configuration of the barrier is then evaluated numerically and illustrated graphically for various values of the wave number. It is observed that resonant interaction of the wave generated, with the sinusoidal bottom undulation occurs when the ratio of twice the wavelength of the sinusoidal ripple to the wave length of waves generated, approaches unity. Also it is found that the resonance increases as the length of the barrier increases.展开更多
The ongoing need to deliver improved safety, productivity and environmental benefit in coal mining presents an open challenge as well as a powerful incentive to develop new and improved solutions. This paper assesses ...The ongoing need to deliver improved safety, productivity and environmental benefit in coal mining presents an open challenge as well as a powerful incentive to develop new and improved solutions. This paper assesses the critical role that enabling technologies have played in the delivery of remote and automated capability for longwall mining. A brief historical account is given to highlight key technical contributions which have influenced the direction and development of present-day longwall technology. The current state of longwall automation is discussed with particular attention drawn to the technologies that enable automated capability. Outcomes are presented from an independently conducted case study that assessed the impact that CSIRO＇s LASC longwall automation research has made to the longwall mining industry in Australia. Importantly, this study reveals how uptake of this innova- tive technology has significantly benefitted coal mine productivity, improved working conditions for personnel and enhanced environmental outcomes. These benefits have been widely adopted with CSIRO automation technology being used in 60 per cent of all Australian underground operations. International deployment of the technology is also emerging. The paper concludes with future challenges and opportunities to highfight the ongoing scope for longwall automation research and development.展开更多
Long Term Evolution(LTE) and IEEE 802.16 WiMAX are competing access network technologies adopted in 4G wireless networks in recent years.LTE complies with3 GPP standards whereas 802.16 WiMAX is regulated by the Instit...Long Term Evolution(LTE) and IEEE 802.16 WiMAX are competing access network technologies adopted in 4G wireless networks in recent years.LTE complies with3 GPP standards whereas 802.16 WiMAX is regulated by the Institute of Electrical and Electronics Engineers(IEEE).Although WiMAX is already operating commercially in Taiwan,the system is limited to an independent new system that is incompatible with the current 3G system.Hence,the cost of implementing the WiMAX system is relatively high,this being an impediment to its rapid uptake and widespread use.On the other hand,LTE conforms to 3GPP that is supported by telecommunication manufacturers and operators and is,moreover,backward compatible with 3G/UMTS cellular systems.The LTE specifications define how user equipment(UE) connects and communicates with evolved Node B(eNB) base stations.The enhanced version,LTE-Advanced,adds a new entity called the relay node(RN) to widen service coverage,although this change has resulted in a more complex architecture.Mobility management and data forwarding are essential components in wireless mobile networking.This paper focuses on the efficient handover procedure in LTE-Advanced networks,and proposes a Smart Forwarding mechanism to improve the handover performance.Simulation studies show that the proposed Smart Forwarding scheme employs a better operational transmission path that effectively reduces handover latency and signal overhead.展开更多
文摘Our study was carried out to assess the level of noise generated and ground vibrations induced during blasting operations at the Ewekoro limestone quarry in Nigeria.To achieve this objective,vibro monitor equipment was used to take readings related to noise generated and ground vibrations during all blasting operations that took place in the quarry for a period of one month.As well,a digital camera was used to take photographs of residential structures within villages near the quarry.The results obtained indicate that the ground vibration readings fall between 0.5 mm/s and 2.1 mm/s and the noise generated during the blasting operations between 82 dB and 89 dB.These readings when compared with the limits set by FEPA(Federal Environmental Protection Agency) of 5.0 mm/s and 150 dB) all fall within the permissible limits.However the photographs of most structures near the quarry reveal cracks and dilapidated building walls.Recommendations are made on how to sustain and improve current blasting techniques.
基金Supported by DST through the Research Project No.SR/SY/MS: 521/08
文摘In the present paper, the effect of a small bottom tmdulation of the sea bed in the form of periodic bed form on the surface waves generated due to a rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of non uniform finite depth is investigated. A simplified perturbation technique involving a non dimensional parameter characterizing the smallness of the bottom deformation is applied to reduce the given boundary value problem to two independent boundary value problems upto first order. The first boundary value problem corresponds to the problem of water wave generation due to rolling oscillation of a vertical barrier either partially immersed or completely submerged in water of uniform finite depth. This is a well known problem whose solution is available in the literature. From the second boundary value problem, the first order correction to the wave amplitude at infinity is evaluated in terms of the shape function characterizing the bottom undulation, by employing Green＇s integral theorem. For a patch of sinusoidal ripples at the sea bottom, the first order correction to the wave amplitude at infinity for both the configuration of the barrier is then evaluated numerically and illustrated graphically for various values of the wave number. It is observed that resonant interaction of the wave generated, with the sinusoidal bottom undulation occurs when the ratio of twice the wavelength of the sinusoidal ripple to the wave length of waves generated, approaches unity. Also it is found that the resonance increases as the length of the barrier increases.
文摘The ongoing need to deliver improved safety, productivity and environmental benefit in coal mining presents an open challenge as well as a powerful incentive to develop new and improved solutions. This paper assesses the critical role that enabling technologies have played in the delivery of remote and automated capability for longwall mining. A brief historical account is given to highlight key technical contributions which have influenced the direction and development of present-day longwall technology. The current state of longwall automation is discussed with particular attention drawn to the technologies that enable automated capability. Outcomes are presented from an independently conducted case study that assessed the impact that CSIRO＇s LASC longwall automation research has made to the longwall mining industry in Australia. Importantly, this study reveals how uptake of this innova- tive technology has significantly benefitted coal mine productivity, improved working conditions for personnel and enhanced environmental outcomes. These benefits have been widely adopted with CSIRO automation technology being used in 60 per cent of all Australian underground operations. International deployment of the technology is also emerging. The paper concludes with future challenges and opportunities to highfight the ongoing scope for longwall automation research and development.
基金supported in part by the National Science Council,Taiwan,"R.O.C.",under grant no.NSC 101-2221-E-164-019 and NSC 101-2221-E-164-020
文摘Long Term Evolution(LTE) and IEEE 802.16 WiMAX are competing access network technologies adopted in 4G wireless networks in recent years.LTE complies with3 GPP standards whereas 802.16 WiMAX is regulated by the Institute of Electrical and Electronics Engineers(IEEE).Although WiMAX is already operating commercially in Taiwan,the system is limited to an independent new system that is incompatible with the current 3G system.Hence,the cost of implementing the WiMAX system is relatively high,this being an impediment to its rapid uptake and widespread use.On the other hand,LTE conforms to 3GPP that is supported by telecommunication manufacturers and operators and is,moreover,backward compatible with 3G/UMTS cellular systems.The LTE specifications define how user equipment(UE) connects and communicates with evolved Node B(eNB) base stations.The enhanced version,LTE-Advanced,adds a new entity called the relay node(RN) to widen service coverage,although this change has resulted in a more complex architecture.Mobility management and data forwarding are essential components in wireless mobile networking.This paper focuses on the efficient handover procedure in LTE-Advanced networks,and proposes a Smart Forwarding mechanism to improve the handover performance.Simulation studies show that the proposed Smart Forwarding scheme employs a better operational transmission path that effectively reduces handover latency and signal overhead.
