期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
高通和低通滤波器对谐波检测电路检测效果的影响研究 被引量:72
1
作者 王群 姚为正 王兆安 《电工技术学报》 EI CSCD 北大核心 1999年第5期22-26,共5页
从基于瞬时无功功率理论的一种谐波电流检测方法, 推出了采用高通和低通滤波器的两种谐波电流检测电路。利用MATLAB仿真软件建立了相应的仿真电路, 并就滤波器对谐波电流检测电路检测效果的影响进行了仿真研究, 同时对两种电... 从基于瞬时无功功率理论的一种谐波电流检测方法, 推出了采用高通和低通滤波器的两种谐波电流检测电路。利用MATLAB仿真软件建立了相应的仿真电路, 并就滤波器对谐波电流检测电路检测效果的影响进行了仿真研究, 同时对两种电路的性能进行了对比, 结果表明, 滤波器的截止频率、阶数和类型对检测电路的动态响应过程、检测精度都有很大影响。谐波电流检测电路采用低通滤波器, 展开更多
关键词 电网 谐波 检测电路 滤波器 低通滤器
在线阅读 下载PDF
一种激光切割机驱动电源控制系统设计
2
作者 姜宇 张承瑞 张金泽 《组合机床与自动化加工技术》 北大核心 2012年第10期69-73,共5页
提出了一种新的激光切割机的电源控制系统设计方案,该方案融入了FPGA技术,采用意法半导体公司的ARM为控制核心,优化了电路设计,增强系统整体的可靠性,从而实现了高稳定度的激光切割机电源驱动控制。采用MATLAB对参数限制条件进行拟合,... 提出了一种新的激光切割机的电源控制系统设计方案,该方案融入了FPGA技术,采用意法半导体公司的ARM为控制核心,优化了电路设计,增强系统整体的可靠性,从而实现了高稳定度的激光切割机电源驱动控制。采用MATLAB对参数限制条件进行拟合,简化了ARM程序。通过巴特沃斯型低通滤器对ARM输出的电压进行滤波,更好地抑制高频信号干扰,提高系统的精度。利用旋转编码器实现对参数的输入、液晶屏的显示以及整机的控制,操作简便。实际应用表明,电源控制系统具有智能化程度高、抗干扰能力强、精度高、运行稳定、操作方便、人机界面友好等优点。 展开更多
关键词 ARM FPGA MATLAB 激光切割机 巴特沃斯型低通滤器
在线阅读 下载PDF
Improved estimation of rotor position for sensorless control of a PMSM based on a sliding mode observer 被引量:8
3
作者 Wahyu Kunto Wibowo Seok-Kwon Jeong 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第7期1643-1656,共14页
This work proposes a new strategy to improve the rotor position estimation of a permanent magnet synchronous motor(PMSM) over wide speed range. Rotor position estimation of a PMSM is performed by using sliding mode ob... This work proposes a new strategy to improve the rotor position estimation of a permanent magnet synchronous motor(PMSM) over wide speed range. Rotor position estimation of a PMSM is performed by using sliding mode observer(SMO). An adaptive observer gain was designed based on Lyapunov function and applied to solve the chattering problem caused by the discontinuous function of the SMO in the wide speed range. The cascade low-pass filter(LPF) with variable cut-off frequency was proposed to reduce the chattering problem and to attenuate the filtering capability of the SMO. In addition, the phase shift caused by the filter was counterbalanced by applying the variable phase delay compensation for the whole speed area. High accuracy estimation result of the rotor position was obtained in the experiment by applying the proposed estimation strategy. 展开更多
关键词 rotor position estimation permanent magnet synchronous motor sliding mode observer adaptive observer gain cascadelow-pass filter variable cut-off frequency variable phase delay compensation
在线阅读 下载PDF
Self-excited vibration problems of maglev vehicle-bridge interaction system 被引量:12
4
作者 李金辉 李杰 +1 位作者 周丹峰 余佩倡 《Journal of Central South University》 SCIE EI CAS 2014年第11期4184-4192,共9页
The self-excited vibration problems of maglev vehicle-bridge interaction system were addressed, which greatly degrades the stability of the levitation control, decreases the ride comfort, and restricts the cost of the... The self-excited vibration problems of maglev vehicle-bridge interaction system were addressed, which greatly degrades the stability of the levitation control, decreases the ride comfort, and restricts the cost of the whole system. Firstly, the coupled model containing the quintessential parts was built, and the mechanism of self-excited vibration was explained in terms of energy transmission from levitation system to bridge. Then, the influences of the parameters of the widely used integral-type proportion and derivation(PD) controller and the delay of signals on the stability of the interaction system were analyzed. The result shows that the integral-type PD control is a nonoptimal approach to solve the self-excited vibration completely. Furthermore, the differential-type PD controller can guarantee the passivity of levitation system at full band. However, the differentiation of levitation gap should be filtered by a low-pass filter due to noise of gap differentiation. The analysis indicates that a well tuned low-pass filter can still keep the coupled system stable. 展开更多
关键词 maglev vehicle-bridge interaction system self-excited vibration energy
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部