期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
水塔水流量的估计建模
1
作者 戴永红 赫孝良 李继成 《工程数学学报》 CSCD 北大核心 2003年第8期53-56,共4页
数学建模实验是近几年才出现的一门新课程,全国有许多高等院校已先后开设了该课程,这方面的教学工作尚处在探索阶段,本文通过一个具体的教学课件介绍了我们在这方面的一些尝试。
关键词 水塔 水流量 估计 估计建模 数学 数学 型假设 问题分析 插值方法 多项式拟合法 数据拟合法
在线阅读 下载PDF
用建模前估计法辨识飞行器的气动参数
2
作者 夏智勋 盛湘饶 唐国金 《国防科技大学学报》 EI CAS CSCD 1998年第6期8-11,共4页
给出了一种利用飞行器飞行试验实测数据估算飞行器气动参数的建模前估计算法,完成了某轴对称无控飞行器的非线性气动参数辨识。计算结果表明:该方法计算过程简单、迅速,可以作为快速估算飞行器气动参数的有力手段,尤其适合于辨识大... 给出了一种利用飞行器飞行试验实测数据估算飞行器气动参数的建模前估计算法,完成了某轴对称无控飞行器的非线性气动参数辨识。计算结果表明:该方法计算过程简单、迅速,可以作为快速估算飞行器气动参数的有力手段,尤其适合于辨识大攻角下的气动参数。 展开更多
关键词 气动参数 辨识 估计 飞行器
在线阅读 下载PDF
一种InSAR大气相位建模与估计方法 被引量:13
3
作者 占文俊 李志伟 +2 位作者 韦建超 朱建军 汪长城 《地球物理学报》 SCIE EI CAS CSCD 北大核心 2015年第7期2320-2329,共10页
为了削弱大气延迟对干涉结果的影响以提高InSAR的测量能力,本文在InSAR大气相位特征分析的基础上,研究了一种新的InSAR大气相位建模与估计方法.首先采用稳健估计确定大气垂直分层部分的模型参数,然后利用基于Matern模型的Kriging插值估... 为了削弱大气延迟对干涉结果的影响以提高InSAR的测量能力,本文在InSAR大气相位特征分析的基础上,研究了一种新的InSAR大气相位建模与估计方法.首先采用稳健估计确定大气垂直分层部分的模型参数,然后利用基于Matern模型的Kriging插值估计大气紊流部分,最后应用估计的大气垂直分层和紊流资料改正InSAR测量结果.利用覆盖河南义马地区的ASAR数据对本文提出的方法进行了验证,结果表明去除大气影响后,InSAR重建的DEM与参考DEM的高程差异的均方误差由19.5m降至5.3m,精度提高了约72%.同时,改正后的干涉图更合理地揭示了义马矿区的沉降漏斗情况,进一步验证了本文方法的有效性. 展开更多
关键词 合成孔径雷达干涉 大气相位 估计 稳健估计 Matern
在线阅读 下载PDF
基于Fisher分布的极化合成孔径雷达统计建模及其参数估计方法 被引量:4
4
作者 毛滔 刘涛 《电波科学学报》 EI CSCD 北大核心 2016年第5期948-956,共9页
为更准确地描述高分辨极化合成孔径雷达(Synthetic Aperture Radar,SAR)图像的尖峰和长拖尾等统计分布特性,提出了基于Fisher分布的极化图像多变量乘积模型,并研究了其参数估计方法.首先给出了柯西分布相干斑噪声等效纹理分量的概率密... 为更准确地描述高分辨极化合成孔径雷达(Synthetic Aperture Radar,SAR)图像的尖峰和长拖尾等统计分布特性,提出了基于Fisher分布的极化图像多变量乘积模型,并研究了其参数估计方法.首先给出了柯西分布相干斑噪声等效纹理分量的概率密度函数及其低阶矩特征;然后利用散射因子服从F分布的等效纹理变量与高斯散斑变量相乘形成的多变量乘积统计模型,得到了Fisher分布模型的概率密度函数,并推导了其多视协方差矩阵的概率密度函数和矩阵行列式值的低阶矩特征;最后提出了基于矩阵行列式值的矩估计和基于Mellin变换的对数累积量估计等两种参数估计方法,并进行了对比,同时通过仿真数据和实测数据验证了理论模型和新参数估计方法的有效性.这为高分辨极化SAR图像建模、目标检测和识别等领域的理论研究和工程实现提供了新途径. 展开更多
关键词 Fisher分布 Kummer—U函数 极化SAR Mellin变换 多视 估计
在线阅读 下载PDF
山前带地震成像技术需求与勘探策略分析 被引量:4
5
作者 杨勤勇 王华忠 +1 位作者 刘少勇 方伍宝 《石油物探》 EI CSCD 北大核心 2012年第6期570-573,535-536,共4页
山前带地震勘探困难的根源在于复杂地表条件。由于复杂地表导致采集数据信噪比低和道间时差变化剧烈是制约山前带探区地震成像和进一步油气预测的主要原因。目前,针对山前带地震勘探的正确的地震数据采集和成像处理理念的缺乏,以及针对... 山前带地震勘探困难的根源在于复杂地表条件。由于复杂地表导致采集数据信噪比低和道间时差变化剧烈是制约山前带探区地震成像和进一步油气预测的主要原因。目前,针对山前带地震勘探的正确的地震数据采集和成像处理理念的缺乏,以及针对山前带地震数据特点的处理流程和相应的成像处理软件系统的不成熟是山前带油气地震勘探无法取得有效突破的现实原因。从山前带存在的地震地质问题入手,分析了山前带地震勘探数据采集和成像处理的特殊之处,提出山前带地震勘探的数据采集应该基于Fresnel半波带同相叠加的基本观点。在完整采集到地下任何一个绕射点(或反射点)产生的到达地表的波前面的基础上,尽可能关注高覆盖次数和低频信号(譬如小于6Hz的信号)。成像处理应该在一个贴近地表的较光滑的基准面上,把表层和中深层统一的深度域层速度估计和模型建立作为山前带成像处理的核心,把Beam波积分法叠前深度偏移作为主要的成像技术手段。在正确理念指导下的野外地震数据采集和针对山前带地震数据特点的成像处理流程的软件工程化是目前山前带地震勘探的当务之急。 展开更多
关键词 山前带地震成像 复杂地表条件 低信噪比 剧变的道间时差 速度估计 射线束叠前深度偏移
在线阅读 下载PDF
Adaptive robust motion trajectory tracking control of pneumatic cylinders 被引量:4
6
作者 孟德远 陶国良 朱笑丛 《Journal of Central South University》 SCIE EI CAS 2013年第12期3445-3460,共16页
High-accuracy motion trajectory tracking control of a pneumatic cylinder driven by a proportional directional control valve was considered. A mathematical model of the system was developed firstly. Due to the time-var... High-accuracy motion trajectory tracking control of a pneumatic cylinder driven by a proportional directional control valve was considered. A mathematical model of the system was developed firstly. Due to the time-varying friction force in the cylinder, unmodeled dynamics, and unknown disturbances, there exist large extent of parametric uncertainties and rather severe uncertain nonlinearities in the pneumatic system. To deal with these uncertainties effectively, an adaptive robust controller was constructed in this work. The proposed controller employs on-line recursive least squares estimation(RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodeled dynamics and disturbances. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology was applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping was used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Extensive experimental results were presented to illustrate the excellent achievable performance of the proposed controller and performance robustness to the load variation and sudden disturbance. 展开更多
关键词 servo-pneumatic system tracking control sliding mode control adaptive control parameter estimation
在线阅读 下载PDF
Performance of cumulant-based rank reduction estimator in presence of unexpected modeling errors
7
作者 王鼎 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第3期992-1001,共10页
Compared with the rank reduction estimator(RARE) based on second-order statistics(called SOS-RARE), the RARE based on fourth-order cumulants(referred to as FOC-RARE) can handle more sources and restrain the negative i... Compared with the rank reduction estimator(RARE) based on second-order statistics(called SOS-RARE), the RARE based on fourth-order cumulants(referred to as FOC-RARE) can handle more sources and restrain the negative impacts of the Gaussian colored noise. However, the unexpected modeling errors appearing in practice are known to significantly degrade the performance of the RARE. Therefore, the direction-of-arrival(DOA) estimation performance of the FOC-RARE is quantitatively derived. The explicit expression for direction-finding(DF) error is derived via the first-order perturbation analysis, and then the theoretical formula for the mean square error(MSE) is given. Simulation results demonstrate the validation of the theoretical analysis and reveal that the FOC-RARE is more robust to the unexpected modeling errors than the SOS-RARE. 展开更多
关键词 fourth-order cumulants(FOC) rank reduction estimator(RARE) modeling error mean square error(MSE)
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部