期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
中孔纳米二氧化钛的制备及其特性 被引量:6
1
作者 常红 王京刚 《有色金属》 CSCD 2004年第2期39-42,共4页
采用新的溶胶 -凝胶法制备具有较高热稳定性的中孔纳米TiO2 粉体 ,并通过TEM、XRD、TG DTA、FTIR等对胶体及粉体进行表征 ,研究煅烧温度及胶体老化时间等因素对材料物性的影响。结果表明 ,纳米二氧化钛在不同的煅烧温度下具有 4种不同... 采用新的溶胶 -凝胶法制备具有较高热稳定性的中孔纳米TiO2 粉体 ,并通过TEM、XRD、TG DTA、FTIR等对胶体及粉体进行表征 ,研究煅烧温度及胶体老化时间等因素对材料物性的影响。结果表明 ,纳米二氧化钛在不同的煅烧温度下具有 4种不同的晶型 (无定型、锐钛矿、锐钛与金红石型共存、金红石型 ) ,所得中孔纳米TiO2 粉体具有单一均匀的网络状形态 ,孔径在 3~ 4nm间 ,升温至 5 0 0℃时保持 1h孔结构不变。最佳的工艺条件为老化时间 2 4h ,煅烧温度 40 0℃。 展开更多
关键词 纳米二氧化钛 制备 催化材料 溶胶-凝胶法 TEM XRD TG-DTA FTIR
在线阅读 下载PDF
中孔纳米二氧化钛光催化降解苯酚的研究 被引量:2
2
作者 王京刚 常红 《有色金属》 CSCD 北大核心 2005年第4期106-109,共4页
以溶胶-凝胶法合成中孔纳米二氧化钛,考察不同光降解反应条件下其对苯酚溶液的降解效果.结果表明,反应液pH在7~9,通氧速率为1 g/L,光催化剂用量为0.3~0.4g/L时,光催化降解效果最好.制备的中孔二氧化钛由于其孔状结构使光催化效率明显... 以溶胶-凝胶法合成中孔纳米二氧化钛,考察不同光降解反应条件下其对苯酚溶液的降解效果.结果表明,反应液pH在7~9,通氧速率为1 g/L,光催化剂用量为0.3~0.4g/L时,光催化降解效果最好.制备的中孔二氧化钛由于其孔状结构使光催化效率明显高于P-25. 展开更多
关键词 环境工程 苯酚 光降解 纳米二氧化钛
在线阅读 下载PDF
模板剂及Ni掺杂对中孔TiO_2材料性能的影响 被引量:2
3
作者 段战辉 罗来涛 +1 位作者 张雪红 邵光新 《分子催化》 EI CAS CSCD 北大核心 2005年第4期298-302,共5页
Mesoporous titania have been prepared using Polyoxyethylene(8) dodecyl ether (Brij35) as template and tetrabutyl titanate as titanium source, effects of the molar ratio of template to titanium source, the calcination ... Mesoporous titania have been prepared using Polyoxyethylene(8) dodecyl ether (Brij35) as template and tetrabutyl titanate as titanium source, effects of the molar ratio of template to titanium source, the calcination temperature and nickel-doped on mesoporous TiO_ 2 were discussed.. The samples formed were characterized with XRD, FT-IR , TG, N_ 2 adsorption and desorption and TEM. The results indicated that mesoporous TiO_ 2 had a big pore diameter and a better stability with Brij35 as template, ratio of template to titanium source had a certain effect on the properties of mesoporous TiO_ 2, The dope of Ni ion has increased the specific surface area of the mesoporous titania. 展开更多
关键词 中孔二氧化钛 聚氧乙烯十二烷基醚 Ni掺杂
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部