期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
天蚕茧不同解舒工艺的效果及对丝色的影响 被引量:2
1
作者 王建业 赵桂珍 丁素心 《辽宁农业科学》 北大核心 1992年第2期14-17,共4页
本试验采用6种不同的解舒工艺,通过缫丝试验,探索其工艺对天蚕茧的缫丝效果及其天蚕丝颜色的变化情况。结果表明,有别于柞蚕和桑蚕茧的解舒工艺,使天蚕茧层充分吸水后,进行湿热处理和用解舒剂Ⅱ水溶液长时间汤煮、再蒸煮的组合处理工艺... 本试验采用6种不同的解舒工艺,通过缫丝试验,探索其工艺对天蚕茧的缫丝效果及其天蚕丝颜色的变化情况。结果表明,有别于柞蚕和桑蚕茧的解舒工艺,使天蚕茧层充分吸水后,进行湿热处理和用解舒剂Ⅱ水溶液长时间汤煮、再蒸煮的组合处理工艺,可以明显改善天蚕茧缫丝效果,保持天蚕丝的绿度和提高生丝回收率。 展开更多
关键词 天蚕 解舒工艺 丝色 蚕茧
在线阅读 下载PDF
D301A型自动缫丝机产生生丝色泽疵点的原因及其对策
2
作者 刘华平 《丝绸》 CAS 北大核心 1995年第9期27-28,共2页
总结和分析了D301A型自动缫丝机缫制的生丝,产生色不齐和夹花丝的原因,认为主要是与制丝用水的水质,设备选用的材质,缫丝槽配温水进排水口的位置、形式和管理水平等四大因素有关,并针对存在问题提出了相应的对策。
关键词 自动缫 丝色 影响因素 对策
在线阅读 下载PDF
制丝生产中夹花丝、丝色不齐的成因及对策
3
作者 张乃胜 崔砚涛 《丝绸》 CAS 北大核心 2004年第2期22-23,共2页
针对制丝生产中时常出现的夹花丝及丝色不齐的成因进行、分析试验和论述,并结合生产实际提出了对策。
关键词 生产 夹花 丝色不齐 成因 质量控制
在线阅读 下载PDF
假日前后丝色差异的成因及防止方法
4
作者 王继峰 《丝绸》 CAS 北大核心 1994年第7期25-26,共2页
针对丝厂假日前后极易产生的丝色差异问题。
关键词 外观 丝色差异 防止
在线阅读 下载PDF
缫丝过程中如何减少丝色疵点的产生
5
作者 张世果 尹万良 《丝绸》 CAS 北大核心 2003年第8期51-51,共1页
关键词 丝色疵点 质量控制 D301B系列自动缫 夹花 黑点 油污
在线阅读 下载PDF
统一丝色 提高品质
6
作者 李晓红 朱焰波 《广东蚕业》 2005年第1期23-26,共4页
丝色疵点影响生丝的正品率,本文通过分析其产生的影响,探讨统一丝色的途径。
关键词 丝色 统一 原因 途径
在线阅读 下载PDF
Patterned Three-Dimensional Photonic Crystal Structures Based on Paper Substrates
7
作者 WANG Ye-qi LI Xiu +1 位作者 HUANG Min LIU Yu 《印刷与数字媒体技术研究》 北大核心 2025年第4期62-69,共8页
In the printing industry,the common method of coloring relies on inks,which contains amounts of chemical agents,causing environment pollution.However,structural color achieves coloration through the refraction and dif... In the printing industry,the common method of coloring relies on inks,which contains amounts of chemical agents,causing environment pollution.However,structural color achieves coloration through the refraction and diffraction of light by periodic structure,offering eco-friendly and fade-resistant advantages,as well as colorful.In this study,screen printing was used to create patterned mask on paper substrates.Then,coated SiO_(2)microspheres on the mask to create structural color patterns with angle-dependent color characteristics.The patterns showed color changes from rose-red to orange to green by changing the viewing angle.By changing the color grayscale,the absorption of stray light by the substrate was enhanced,thereby the brightness and saturation of the structural color improved too.This method is simple,cost-effective,and environmentally friendly,and it has highly promising for the application in printing and anti-counterfeiting. 展开更多
关键词 Photonic crystal Structural color Screen printing SiO_(2)microsphere Environmental protection
在线阅读 下载PDF
若干新纤维简介
8
《现代纺织技术》 2004年第3期12-12,共1页
关键词 纤维性能 Sensil系列产品 效应变形 TACTEL prisma 新纤维 产品介绍
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部