For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body&#...For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body's compression ratio. Horizontal roof gap, as a key parameter of backfilling characteristics, may impact the backfilling effect from the aspects of control of roof subsidence in advance, support stress, backfilling process and the support design. Firstly, the reason why horizontal roof gap exists was analyzed and its definition, causes and connotation were introduced, then adopting the Pro/E 3D simulation software, three typical 3D entity models of backfill hydraulic supports were built, based on the influence of horizontal roof gap on backfilling effect, and influence rules of four factors, i.e. support height, suspension height, suspension angle and tamping angle, were emphatically analyzed on horizontal roof gap. The results indicate that, the four factors all have significant impacts on horizontal roof gap, but show differences in influence trend and degree, showing negative linear correlation, positive linear correlation, positive semi-parabolic correlation and negative semi-parabolic correlation, respectively. Four legs type is the most adaptive to the four factors, while six legs(II) type has the poorest adaptability, and the horizontal roof gap is small under large support height, small suspension height, small suspension angle and large tamping angle situation. By means of optimizing structure components and their positional relation and suspension height of backfill scrape conveyor in the process of support design and through controlling working face deployment, roof subsidence in advance, mining height and backfilling during engineering application, the horizontal roof gap is optimized. The research results can be served as theoretical basis for support design and guidance for backfill support to have better performance in backfilling.展开更多
Stochastic modeling techniques have been widely applied to oil-gas reservoir lithofacies.Markov chain simulation~however~is still under development~mainly because of the difficulties in reasonably defining conditional...Stochastic modeling techniques have been widely applied to oil-gas reservoir lithofacies.Markov chain simulation~however~is still under development~mainly because of the difficulties in reasonably defining conditional probabilities for multi-dimensional Markov chains and determining transition probabilities for horizontal strike and dip directions.The aim of this work is to solve these problems.Firstly~the calculation formulae of conditional probabilities for multi-dimensional Markov chain models are proposed under the full independence and conditional independence assumptions.It is noted that multi-dimensional Markov models based on the conditional independence assumption are reasonable because these models avoid the small-class underestimation problem.Then~the methods for determining transition probabilities are given.The vertical transition probabilities are obtained by computing the transition frequencies from drilling data~while the horizontal transition probabilities are estimated by using well data and the elongation ratios according to Walther's law.Finally~these models are used to simulate the reservoir lithofacies distribution of Tahe oilfield in China.The results show that the conditional independence method performs better than the full independence counterpart in maintaining the true percentage composition and reproducing lithofacies spatial features.展开更多
The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersi...The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m3 and 50 m3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance.展开更多
The current work is an extension of the nonlocal elasticity theory to fractional order thermo-elasticity in semiconducting nanostructure medium with voids.The analysis is made on the reflection phenomena in context of...The current work is an extension of the nonlocal elasticity theory to fractional order thermo-elasticity in semiconducting nanostructure medium with voids.The analysis is made on the reflection phenomena in context of three-phase-lag thermo-elastic model.It is observed that,four-coupled longitudinal waves and an independent shear vertical wave exist in the medium which is dispersive in nature.It is seen that longitudinal waves are damped,and shear wave is un-damped when angular frequency is less than the cut-off frequency.The voids,thermal and non-local parameter affect the dilatational waves whereas shear wave is only depending upon non-local parameter.It is found that reflection coefficients are affected by nonlocal and fractional order parameters.Reflection coefficients are calculated analytically and computed numerically for a material,silicon and discussed graphically in details.The results for local(classical)theory are obtained as a special case.The study may be useful in semiconductor nanostructure,geology and seismology in addition to semiconductor nanostructure devices.展开更多
For the interaction relation between geological object and engineering object in some fields related to water conservancy and hydropower, a unified modeling idea was proposed. On the basis of summarizing both advantag...For the interaction relation between geological object and engineering object in some fields related to water conservancy and hydropower, a unified modeling idea was proposed. On the basis of summarizing both advantages and disadvantages of existing modeling methods, an automatic unified modeling method of both engineering and geological objects based on tri-prism(TP) model was presented. Through the lossless correction algorithm of deviated drill holes contained in this method, the real deviated drill holes could be corrected into the equivalent virtual vertical ones. And the correction accuracy fully meets the requirements of unified modeling. With the virtual vertical drilling data, TIN construction of both cover layer and other stratums would be built in order to obtain the 3D geological model. Then, the engineering design data would be introduced into the 3D geological model for achieving unified modeling. For this process, the volume subdividing and restructuring principles were introduced to deal with the spatial relationships between engineering object and geological object. In order to improve the efficiency of unified modeling, the reconstruction of TIN based on constraint information was also applied in this method. At last, the feasibility and validation of the unified modeling method as well as its relevant key algorithms were verified by specific experiments and analysis of results.展开更多
Role based access control is one of the widely used access control models.There are investigations in the literature that use knowledge representation mechanisms such as formal concept analysis(FCA),description logics...Role based access control is one of the widely used access control models.There are investigations in the literature that use knowledge representation mechanisms such as formal concept analysis(FCA),description logics,and Ontology for representing access control mechanism.However,while using FCA,investigations reported in the literature so far work on the logic that transforms the three dimensional access control matrix into dyadic formal contexts.This transformation is mainly to derive the formal concepts,lattice structure and implications to represent role hierarchy and constraints of RBAC.In this work,we propose a methodology that models RBAC using triadic FCA without transforming the triadic access control matrix into dyadic formal contexts.Our discussion is on two lines of inquiry.We present how triadic FCA can provide a suitable representation of RBAC policy and we demonstrate how this representation follows role hierarchy and constraints of RBAC on sample healthcare network available in the literature.展开更多
基金Project(2014ZDPY02) supported by the Fundamental Research Funds for the Central Universities,ChinaProject supported by Qinglan Plan of Jiangsu Province,ChinaProject(SKLCRSM12X01) supported by State Key Laboratory of Coal Resources and Safe Mining(China University of Mining & Technology)
文摘For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body's compression ratio. Horizontal roof gap, as a key parameter of backfilling characteristics, may impact the backfilling effect from the aspects of control of roof subsidence in advance, support stress, backfilling process and the support design. Firstly, the reason why horizontal roof gap exists was analyzed and its definition, causes and connotation were introduced, then adopting the Pro/E 3D simulation software, three typical 3D entity models of backfill hydraulic supports were built, based on the influence of horizontal roof gap on backfilling effect, and influence rules of four factors, i.e. support height, suspension height, suspension angle and tamping angle, were emphatically analyzed on horizontal roof gap. The results indicate that, the four factors all have significant impacts on horizontal roof gap, but show differences in influence trend and degree, showing negative linear correlation, positive linear correlation, positive semi-parabolic correlation and negative semi-parabolic correlation, respectively. Four legs type is the most adaptive to the four factors, while six legs(II) type has the poorest adaptability, and the horizontal roof gap is small under large support height, small suspension height, small suspension angle and large tamping angle situation. By means of optimizing structure components and their positional relation and suspension height of backfill scrape conveyor in the process of support design and through controlling working face deployment, roof subsidence in advance, mining height and backfilling during engineering application, the horizontal roof gap is optimized. The research results can be served as theoretical basis for support design and guidance for backfill support to have better performance in backfilling.
基金Project(2016YFB0503601)supported by the National Key Research and Development Program of ChinaProject(41730105)supported by the National Natural Science Foundation of China
文摘Stochastic modeling techniques have been widely applied to oil-gas reservoir lithofacies.Markov chain simulation~however~is still under development~mainly because of the difficulties in reasonably defining conditional probabilities for multi-dimensional Markov chains and determining transition probabilities for horizontal strike and dip directions.The aim of this work is to solve these problems.Firstly~the calculation formulae of conditional probabilities for multi-dimensional Markov chain models are proposed under the full independence and conditional independence assumptions.It is noted that multi-dimensional Markov models based on the conditional independence assumption are reasonable because these models avoid the small-class underestimation problem.Then~the methods for determining transition probabilities are given.The vertical transition probabilities are obtained by computing the transition frequencies from drilling data~while the horizontal transition probabilities are estimated by using well data and the elongation ratios according to Walther's law.Finally~these models are used to simulate the reservoir lithofacies distribution of Tahe oilfield in China.The results show that the conditional independence method performs better than the full independence counterpart in maintaining the true percentage composition and reproducing lithofacies spatial features.
基金Project(2012BAB14B05)supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China
文摘The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m3 and 50 m3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance.
文摘The current work is an extension of the nonlocal elasticity theory to fractional order thermo-elasticity in semiconducting nanostructure medium with voids.The analysis is made on the reflection phenomena in context of three-phase-lag thermo-elastic model.It is observed that,four-coupled longitudinal waves and an independent shear vertical wave exist in the medium which is dispersive in nature.It is seen that longitudinal waves are damped,and shear wave is un-damped when angular frequency is less than the cut-off frequency.The voids,thermal and non-local parameter affect the dilatational waves whereas shear wave is only depending upon non-local parameter.It is found that reflection coefficients are affected by nonlocal and fractional order parameters.Reflection coefficients are calculated analytically and computed numerically for a material,silicon and discussed graphically in details.The results for local(classical)theory are obtained as a special case.The study may be useful in semiconductor nanostructure,geology and seismology in addition to semiconductor nanostructure devices.
基金Project(BK2012812)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(51079053)supported by the National Natural Science Foundation of China+2 种基金Project(KYLX_0493)supported by the Scientific Research and Innovation Program for College Graduates of Jiangsu Province,ChinaProject(2014B38814)supported by the Fundamental Research Funds for Central Universities,ChinaProject(2014.1526)supported by the Open Research Fund Program of Key Laboratory of Geological Information of Ministry of Land and Resources,China
文摘For the interaction relation between geological object and engineering object in some fields related to water conservancy and hydropower, a unified modeling idea was proposed. On the basis of summarizing both advantages and disadvantages of existing modeling methods, an automatic unified modeling method of both engineering and geological objects based on tri-prism(TP) model was presented. Through the lossless correction algorithm of deviated drill holes contained in this method, the real deviated drill holes could be corrected into the equivalent virtual vertical ones. And the correction accuracy fully meets the requirements of unified modeling. With the virtual vertical drilling data, TIN construction of both cover layer and other stratums would be built in order to obtain the 3D geological model. Then, the engineering design data would be introduced into the 3D geological model for achieving unified modeling. For this process, the volume subdividing and restructuring principles were introduced to deal with the spatial relationships between engineering object and geological object. In order to improve the efficiency of unified modeling, the reconstruction of TIN based on constraint information was also applied in this method. At last, the feasibility and validation of the unified modeling method as well as its relevant key algorithms were verified by specific experiments and analysis of results.
基金the financial support from Department of Science and Technology,Government of India under the grant:SR/CSRI/118/2014
文摘Role based access control is one of the widely used access control models.There are investigations in the literature that use knowledge representation mechanisms such as formal concept analysis(FCA),description logics,and Ontology for representing access control mechanism.However,while using FCA,investigations reported in the literature so far work on the logic that transforms the three dimensional access control matrix into dyadic formal contexts.This transformation is mainly to derive the formal concepts,lattice structure and implications to represent role hierarchy and constraints of RBAC.In this work,we propose a methodology that models RBAC using triadic FCA without transforming the triadic access control matrix into dyadic formal contexts.Our discussion is on two lines of inquiry.We present how triadic FCA can provide a suitable representation of RBAC policy and we demonstrate how this representation follows role hierarchy and constraints of RBAC on sample healthcare network available in the literature.
