Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)an...Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.展开更多
Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiv...Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.展开更多
Ru nanoparticles with fcc and hcp crystal phases were obtained by chemical reduction method using different precursors and reducing agents,and their catalytic properties in ammonia synthesis were compared.The catalyti...Ru nanoparticles with fcc and hcp crystal phases were obtained by chemical reduction method using different precursors and reducing agents,and their catalytic properties in ammonia synthesis were compared.The catalytic reaction rate(666.4μmol·h^(−1)·g^(−1))of fcc Ru catalyst is higher than that of hcp Ru(378.9μmol·h^(−1)·g^(−1))at the reaction temperature(400℃)and pressure(1 MPa).The results indicate that the exposed crystal faces have a certain impact on the catalytic activity.The dissociation ability to N_(2) of fcc Ru exposed(111)and(200)is better than that of hcp Ru exposed(100).When the ruthenium catalyst was loaded on rod-like CeO_(2) support,the ammonia synthesis activity was further improved.The ammonia synthesis activity of fcc Ru/CeO_(2) is 1.4 times higher than that of hcp Ru/CeO_(2) under the test conditions.展开更多
Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fab...Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fabrication of silver nanomembranes in control of light absorption.By varying the hatch distance,different morphologies of randomly distributed plasmon silver nanostructures were produced,leading to well-controlled light absorption levels from 11%to 81%over broadband.The anti-reflection features were maintained below 17%.Equilibrated and plain absorptions were obtained throughout all absorption levels with a maximum intensity fluctuation of±8.5%for the 225μJ cases.The 45μJ pulse energy can offer a highly equilibrated absorption at a 60%absorption level with an intensity fluctuation of±1%.Pattern transfer was also achieved on a thin tape surface.The laser-transferred characters and patterns demonstrate a localized temperature rise.A rapid temperature rising of roughly 15℃can be achieved within 1 s.The LIFT process is highly efficiently fabricated with a typical speed value of 10^(3)to 10^(5)cm^(2)/h.The results indicated that LIFT is a well-controlled and efficient method for the production of optical films with specific absorption levels.展开更多
Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circ...Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circular nanotube arrays, two photonic band gaps are emerged in the transmission spectra offing-shaped nanotube arrays, the two band gaps and transmission spectra are adjusted by the length, inner radius, intertube spacing and the dielectric constants of the core and embedding medium, and magnitude modification, redshift and blueshift of the resonance modes are observed. A metallic ring-shaped nanotube arrays for subwavelength band-stop filter in the range of visible light can be achieved. To understand its physical origin, field-interference mechanism was suggested by the field distributions. The proposed nanostructures and results may have great potential applications in subwavelength near-field optics.展开更多
The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd F...The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd Fe B（100 nm）/Co（y）]×10/Mo（50 nm） thin films were researched by AFM, XRD and VSM, respectively. The results show that the films show stronger perpendicular magnetic anisotropy. When the thickness of Co layers is 10 nm, the coercivity Hc⊥ is the maximum, 295 k A/m. However, for y=10-20, the reduced remanence M/Ms of films has increased. When the thickness of Co layers is 20-30 nm, the Nd Fe B/Co multilayer films obtained more superior magnetic properties with M/Ms =0.95.展开更多
文摘Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.
文摘Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.
基金The National Natural Science Foundation of China(22102194)The Science and Technology Plan of Gansu Province(24JRRA067,23ZDFA016)The Youth Innovation Promotion Association of CAS(2022427).
文摘Ru nanoparticles with fcc and hcp crystal phases were obtained by chemical reduction method using different precursors and reducing agents,and their catalytic properties in ammonia synthesis were compared.The catalytic reaction rate(666.4μmol·h^(−1)·g^(−1))of fcc Ru catalyst is higher than that of hcp Ru(378.9μmol·h^(−1)·g^(−1))at the reaction temperature(400℃)and pressure(1 MPa).The results indicate that the exposed crystal faces have a certain impact on the catalytic activity.The dissociation ability to N_(2) of fcc Ru exposed(111)and(200)is better than that of hcp Ru exposed(100).When the ruthenium catalyst was loaded on rod-like CeO_(2) support,the ammonia synthesis activity was further improved.The ammonia synthesis activity of fcc Ru/CeO_(2) is 1.4 times higher than that of hcp Ru/CeO_(2) under the test conditions.
基金Projects(61704090, 11904177) supported by the National Natural Science Foundation of ChinaProject(KFJJ20210205) supported by the National and Local Joint Engineering Laboratory of RF Integration and Micro-Assembly Technology,Nanjing University of Posts and Telecommunications,China。
文摘Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fabrication of silver nanomembranes in control of light absorption.By varying the hatch distance,different morphologies of randomly distributed plasmon silver nanostructures were produced,leading to well-controlled light absorption levels from 11%to 81%over broadband.The anti-reflection features were maintained below 17%.Equilibrated and plain absorptions were obtained throughout all absorption levels with a maximum intensity fluctuation of±8.5%for the 225μJ cases.The 45μJ pulse energy can offer a highly equilibrated absorption at a 60%absorption level with an intensity fluctuation of±1%.Pattern transfer was also achieved on a thin tape surface.The laser-transferred characters and patterns demonstrate a localized temperature rise.A rapid temperature rising of roughly 15℃can be achieved within 1 s.The LIFT process is highly efficiently fabricated with a typical speed value of 10^(3)to 10^(5)cm^(2)/h.The results indicated that LIFT is a well-controlled and efficient method for the production of optical films with specific absorption levels.
基金Projects(11164007,61275174)supported by the National Natural Science Foundation of ChinaProject(20100162110068)supported by the Doctoral Program of Higher Education of China+1 种基金Project(20132BAB212007)supported by the Natural Science Foundation of Jiangxi Province,ChinaProject(GJJ11107)supported by Scientific Foundation of Jiangxi Education Department,China
文摘Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circular nanotube arrays, two photonic band gaps are emerged in the transmission spectra offing-shaped nanotube arrays, the two band gaps and transmission spectra are adjusted by the length, inner radius, intertube spacing and the dielectric constants of the core and embedding medium, and magnitude modification, redshift and blueshift of the resonance modes are observed. A metallic ring-shaped nanotube arrays for subwavelength band-stop filter in the range of visible light can be achieved. To understand its physical origin, field-interference mechanism was suggested by the field distributions. The proposed nanostructures and results may have great potential applications in subwavelength near-field optics.
文摘The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd Fe B（100 nm）/Co（y）]×10/Mo（50 nm） thin films were researched by AFM, XRD and VSM, respectively. The results show that the films show stronger perpendicular magnetic anisotropy. When the thickness of Co layers is 10 nm, the coercivity Hc⊥ is the maximum, 295 k A/m. However, for y=10-20, the reduced remanence M/Ms of films has increased. When the thickness of Co layers is 20-30 nm, the Nd Fe B/Co multilayer films obtained more superior magnetic properties with M/Ms =0.95.
