The chiral separation of phenylsuccinic acid(PSA)was studied by reversed phase high-performance liquid chromatography(RP-HPLC)with cyclodextrins(CDs)as chiral mobile phase additives.The effects of types of CDs,concent...The chiral separation of phenylsuccinic acid(PSA)was studied by reversed phase high-performance liquid chromatography(RP-HPLC)with cyclodextrins(CDs)as chiral mobile phase additives.The effects of types of CDs,concentration of hydroxypropyl-β-cyclodextrin(HP-β-CD),percentage of organic modifier,pH value and column temperature on enantioselective separation were investigated.The quantification property of the developed RP-HPLC method was examined.The chiral recognition mechanism of PSA was also discussed.The results show that a baseline separation of PSA enantiomers is achieved on a Lichrospher C18 column(4.6 mm(inner diameter)×250 mm,5μm)with HP-β-CD as chiral mobile phase additive.The capacity factors of R-PSA and S-PSA are 3.94 and 4.80,respectively.The separation factor and resolution are respectively 1.22 and 8.03.The mobile phase is a mixture of acetonitrile and deionized water(20-80,volume ratio)containing 10 mmol/L HP-β-CD and 0.05% trifluoroacetic acid(pH 2.5,adjusted with triethylamine)with a flow rate of 1.0 mL/min.The ultraviolet(UV)detector is set at 254 nm.The likely roles are inclusion interaction,induction and hydrogen bonding between HP-β-CD and PSA enantiomers.展开更多
Based on the chiral ligand exchange, the distribution behavior of mandelic acid enantiomers, and the partition of Cu2+ at different pH values were studied in a water/alcohol two-phase system containing Cu2+ and N-n-（...Based on the chiral ligand exchange, the distribution behavior of mandelic acid enantiomers, and the partition of Cu2+ at different pH values were studied in a water/alcohol two-phase system containing Cu2+ and N-n-（dodecyl-L-proline（A）.） The influences of the solvent sort, the pH value, the concentrations of Cu2+ and chiral ligand on the partition coefficient（K） and separation factor（α） were discussed. The experimental results show that the A formed has more stable ternary complex with D-mandelic acid enantiomer than with L-mandelic acid enantiomer. There is an important influence of the pH value on K and α. When the pH values are less than 3.5, the formation of binary complexes is thermodynamically unfavourable. K and α become maximum when pH values are above 3.5 and the molar ratio of the chiral ligand to Cu2+ is 2∶1.展开更多
The Gaussian mixture model (GMM), k-nearest neighbor (k-NN), quadratic discriminant analysis (QDA), and linear discriminant analysis (LDA) were compared to classify wrist motions using surface electromyogram (EMG). Ef...The Gaussian mixture model (GMM), k-nearest neighbor (k-NN), quadratic discriminant analysis (QDA), and linear discriminant analysis (LDA) were compared to classify wrist motions using surface electromyogram (EMG). Effect of feature selection in EMG signal processing was also verified by comparing classification accuracy of each feature, and the enhancement of classification accuracy by normalization was confirmed. EMG signals were acquired from two electrodes placed on the forearm of twenty eight healthy subjects and used for recognition of wrist motion. Features were extracted from the obtained EMG signals in the time domain and were applied to classification methods. The difference absolute mean value (DAMV), difference absolute standard deviation value (DASDV), mean absolute value (MAV), root mean square (RMS) were used for composing 16 double features which were combined of two channels. In the classification methods, the highest accuracy of classification showed in the GMM. The most effective combination of classification method and double feature was (MAV, DAMV) of GMM and its classification accuracy was 96.85%. The results of normalization were better than those of non-normalization in GMM, k-NN, and LDA.展开更多
Chiral ionic liquids (CILs) containing imidazolium cations and L-Proline (L-Pro) anions were applied as chiral selector to separate tryptophan (Trp) enantiomers on a C18 column by ligand exchange chromatography. Sever...Chiral ionic liquids (CILs) containing imidazolium cations and L-Proline (L-Pro) anions were applied as chiral selector to separate tryptophan (Trp) enantiomers on a C18 column by ligand exchange chromatography. Several factors influencing Trp enantiomers separation, such as alkyl chain length of CILs, concentrations of Cu2+ and CILs, pH of the mobile phase, flow rate, organic solvent and temperature, were studied. Under the optimal conditions, the Trp enantiomers could be successfully separated within 21 min with the resolution of 2.30. At the same time, some thermodynamical parameters were obtained. The experimental results show that the enthalpy values of the Trp enantiomers are negative, indicating that the separation process is exothermic. And the enthalpy values of D-Trp are larger than those of L-Trp, which indicates that L-Trp could form more stable ternary complexes with tryptophan enantiomers.展开更多
Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. Fi...Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.展开更多
基金Project(20776038)supported by the National Natural Science Foundation of China
文摘The chiral separation of phenylsuccinic acid(PSA)was studied by reversed phase high-performance liquid chromatography(RP-HPLC)with cyclodextrins(CDs)as chiral mobile phase additives.The effects of types of CDs,concentration of hydroxypropyl-β-cyclodextrin(HP-β-CD),percentage of organic modifier,pH value and column temperature on enantioselective separation were investigated.The quantification property of the developed RP-HPLC method was examined.The chiral recognition mechanism of PSA was also discussed.The results show that a baseline separation of PSA enantiomers is achieved on a Lichrospher C18 column(4.6 mm(inner diameter)×250 mm,5μm)with HP-β-CD as chiral mobile phase additive.The capacity factors of R-PSA and S-PSA are 3.94 and 4.80,respectively.The separation factor and resolution are respectively 1.22 and 8.03.The mobile phase is a mixture of acetonitrile and deionized water(20-80,volume ratio)containing 10 mmol/L HP-β-CD and 0.05% trifluoroacetic acid(pH 2.5,adjusted with triethylamine)with a flow rate of 1.0 mL/min.The ultraviolet(UV)detector is set at 254 nm.The likely roles are inclusion interaction,induction and hydrogen bonding between HP-β-CD and PSA enantiomers.
基金Project(20376085) supported by the National Natural Science Foundation of China
文摘Based on the chiral ligand exchange, the distribution behavior of mandelic acid enantiomers, and the partition of Cu2+ at different pH values were studied in a water/alcohol two-phase system containing Cu2+ and N-n-（dodecyl-L-proline（A）.） The influences of the solvent sort, the pH value, the concentrations of Cu2+ and chiral ligand on the partition coefficient（K） and separation factor（α） were discussed. The experimental results show that the A formed has more stable ternary complex with D-mandelic acid enantiomer than with L-mandelic acid enantiomer. There is an important influence of the pH value on K and α. When the pH values are less than 3.5, the formation of binary complexes is thermodynamically unfavourable. K and α become maximum when pH values are above 3.5 and the molar ratio of the chiral ligand to Cu2+ is 2∶1.
基金Project(NIPA-2012-H0401-12-1007) supported by the MKE(The Ministry of Knowledge Economy), Korea, supervised by the NIPAProject(2010-0020163) supported by Key Research Institute Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology, Korea
文摘The Gaussian mixture model (GMM), k-nearest neighbor (k-NN), quadratic discriminant analysis (QDA), and linear discriminant analysis (LDA) were compared to classify wrist motions using surface electromyogram (EMG). Effect of feature selection in EMG signal processing was also verified by comparing classification accuracy of each feature, and the enhancement of classification accuracy by normalization was confirmed. EMG signals were acquired from two electrodes placed on the forearm of twenty eight healthy subjects and used for recognition of wrist motion. Features were extracted from the obtained EMG signals in the time domain and were applied to classification methods. The difference absolute mean value (DAMV), difference absolute standard deviation value (DASDV), mean absolute value (MAV), root mean square (RMS) were used for composing 16 double features which were combined of two channels. In the classification methods, the highest accuracy of classification showed in the GMM. The most effective combination of classification method and double feature was (MAV, DAMV) of GMM and its classification accuracy was 96.85%. The results of normalization were better than those of non-normalization in GMM, k-NN, and LDA.
基金Project(21176262) supported by the National Natural Science Foundation of ChinaProject(2010WK3029) supported by Science and Technology Program of Hunan Province,China
文摘Chiral ionic liquids (CILs) containing imidazolium cations and L-Proline (L-Pro) anions were applied as chiral selector to separate tryptophan (Trp) enantiomers on a C18 column by ligand exchange chromatography. Several factors influencing Trp enantiomers separation, such as alkyl chain length of CILs, concentrations of Cu2+ and CILs, pH of the mobile phase, flow rate, organic solvent and temperature, were studied. Under the optimal conditions, the Trp enantiomers could be successfully separated within 21 min with the resolution of 2.30. At the same time, some thermodynamical parameters were obtained. The experimental results show that the enthalpy values of the Trp enantiomers are negative, indicating that the separation process is exothermic. And the enthalpy values of D-Trp are larger than those of L-Trp, which indicates that L-Trp could form more stable ternary complexes with tryptophan enantiomers.
基金Project(2012-0005688) supported by the National Research Foundation of Korea (NRF) Grant funded by the Korea Government (MEST)
文摘Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.
