In response to the fact that the presence of manganese dithionate(MnS_(2)O_(6))leads to a series of adverse impacts,especially lower purity of manganese sulfate(MnSO_(4))and disruption of its recovery,advanced oxidati...In response to the fact that the presence of manganese dithionate(MnS_(2)O_(6))leads to a series of adverse impacts,especially lower purity of manganese sulfate(MnSO_(4))and disruption of its recovery,advanced oxidation methods such as ozonation system are used to manage MnS_(2)O_(6)in the leaching solution,replacing conventional methods.To ascertain the conversion rate and kinetics of MnS_(2)O_(6)during the ozonation process,we explored the factors influencing its removal rate,including ozone dosage,manganese dithionate concentration,sulfuric acid concentration,and reaction temperature.Batch experiments were conducted to determine the reaction rate constant of ozone(k)and activation energy(Ea)obtained from intermittent experimental data fitting,revealing a least-squares exponential conversion relationship between k and the MnS_(2)O_(6)removal amount,wherein an increase in the aforementioned factors led to an enhanced MnS_(2)O_(6)conversion rate,exceeding 99.3%.The formation mechanism of the ozone products proposed during the experiment was summarized and proposed as follows:1)Mn^(2+)was directly oxidized to MnO_(2),and 2)SO_(4)2−was obtained by the catalytic oxidation of S_(2)O_(6)^(2−)with HO•from O3 decomposition.According to the kinetics analysis,the pre-exponential factor and total activation energy of the ozonation kinetics equation were 1.0×10^(23) s^(−1) and 177.28 kJ/mol,respectively.Overall,the present study demonstrates that O_(3) as an oxidizing agent can effectively facilitate MnS_(2)O_(6)disproportionation while preventing the release of the secondary pollutant,SO_(2)gas.展开更多
With the addition of urea as an inhibitor, four groups of reducing dioxin emission experiments in sintering pot were conducted. The results show that, adding 0.05%, 0.1% and 0.5% （mass fraction） urea, the emission c...With the addition of urea as an inhibitor, four groups of reducing dioxin emission experiments in sintering pot were conducted. The results show that, adding 0.05%, 0.1% and 0.5% （mass fraction） urea, the emission concentrations of dioxin are 0.287 0.258 and 0.217 ng-TEQ/m3, respectively. The dioxin emission rates drop substantially compared to 0.777 ng-TEQ/m3 flee of urea. With an increase of the urea content, the concentration of SO2 emission reduces sharply. （NH4）2SO4, formed by the reaction of SO2 and NH3, goes into the dust and part of NH3 is released before reaction with the emission of exhaust gas. The NO~ emission presents an increasing trend because the reaction of NH3 and 02 at high temperature produces NOx. Based on the consideration of factors such as the effect of reducing dioxin emission, and the chemical composition of exhaust gas, 0.05% is the optimum adding content of urea.展开更多
The sewage sludge was used to produce adsorbent by controlling the pyrolytic and chemical conditions. Using the adsorbent derived from sewage sludge to adsorb the low concentration SO2 in fixed bed system, the effects...The sewage sludge was used to produce adsorbent by controlling the pyrolytic and chemical conditions. Using the adsorbent derived from sewage sludge to adsorb the low concentration SO2 in fixed bed system, the effects of the metallic derivatives on characteristics of the adsorbent were investigated at different compositions of the gaseous mixtures. The results show that when the mass fraction of vanadium reaches 0.5% and the mass fraction of （iron,） calcium, copper, nickel reach approximately 0.9%, under the condition that the adsorption mixture contains （0.12%SO2,） 3%O2 and 10% water vapor, the maximum adsorption capacity of SO2 can be obtained to be 128, 109, 90, 82, 78 mg·g-1, respectively. So the metallic derivatives fixed onto adsorbent derived from sewage sludge especially vanadium have great effects on of the sorption characteristics of the adsorbent with respect to SO2.展开更多
Copper smelting is a significant source of SO2 emission. It is important to quantify SO2 emissions from combustion sources for regulatory and control purposes in relation to air quality. The characteristics of SO2 emi...Copper smelting is a significant source of SO2 emission. It is important to quantify SO2 emissions from combustion sources for regulatory and control purposes in relation to air quality. The characteristics of SO2 emissions from copper smelting industry in Yurman Province, China, were examined. Analysis based on the present situation, material balance and measuring method were used to confirm SO2 emission factors of copper smelting industry. Results show that SO2 emission factors for Isa system, side blown-continuous converting system （SB-CC）, blast furnace-continuous converting systems （B-CC） and blast furnace-converter blowing （B-C） are 11.69-18.64, 62.44--101.4, 19.43-37.88 and 45.48-81.03 kg/t（blister copper）, respectively. The comprehensive emission factor based on all smelting plants is found to be in the range of 23-39.99 kg-SO2/t（blister copper） for Yunnan Province, China. The results are compared with those for discharge coefficients of industrial pollutants in the First National General Survey of Pollution Sources and the emission factor of the total amount of major pollutants. It is observed that there are some differences among emission factors.展开更多
In this paper,the combined addition of copper or iron and sulphate ions onto TiO_(2) prepared by a simple sol-gel method is studied for formic acid photocatalytic conversion.A wide structural and morphological charact...In this paper,the combined addition of copper or iron and sulphate ions onto TiO_(2) prepared by a simple sol-gel method is studied for formic acid photocatalytic conversion.A wide structural and morphological characterization of the different photocatalysts was performed by X-ray diffraction(XRD),N_(2)-physisorption for BET surface area measurements,scanning and transmission electronic microscopies(SEM and TEM),UV-Vis diffuse spectroscopy(DRS)and X-ray photoelectron spectroscopy(XPS),in order to correlate the physico-chemical properties of the materials to their photocatalytic efficiencies for formic acid oxidation.Results have shown important differences among the catalysts depending on the metal added.Sulphated TiO_(2)/Cu(1%Cu)was the best photocatalyst obtaining about 100% formic acid conversion in only 5 min.The appropriate physico-chemical features of this photocatalyst,given by the addition of combined copper and sulphate ions,explain its excellence in photocatalytic reaction.展开更多
A decomposition model was applied to study the resource-saving and environment-friendly effects of air pollutant emissions(taking industrial SO2 emission as an example) in China.From the results,it is found that 38.93...A decomposition model was applied to study the resource-saving and environment-friendly effects of air pollutant emissions(taking industrial SO2 emission as an example) in China.From the results,it is found that 38.93% and 61.07% are contributed to environment-friendly and resource-saving effects,respectively,by the dramatic decrease in industrial SO2 emission density(nearly 70% from 2001 to 2010).This indicates that China has achieved important progress during the 11th FYP(five-year plan) compared with the 10th FYP.A simultaneous equations model was also employed to analyze the influencing factors by using data from 30 provinces in China.The results imply that the influence of environmental regulation on environment-friendly effect is not obvious during the 10th FYP but obvious during the 11th FYP.Thus,the government should continue promoting the environment-friendly effect by further enhancing environmental regulation and strengthening the role of environmental management.展开更多
Combined technology of SDS-CuO/TiO2 photocatalysis and sequencing batch reactor （SBR） were applied to treating dyestuff wastewater. Photocatalysis was carried out in a spiral up-flow type reactor as pre-treatment. S...Combined technology of SDS-CuO/TiO2 photocatalysis and sequencing batch reactor （SBR） were applied to treating dyestuff wastewater. Photocatalysis was carried out in a spiral up-flow type reactor as pre-treatment. SDS-CuO/TiO2 photocatalyst was prepared by modification of nano-TiO2 using CuO and sodium dodecyl sulfate （SDS）. Results show that the SDS-CuO/TiO2 photocatalyst contains two kinds of crystals, including TiO2 and CuO. The band gap of this photocatalyst is 1.56 eV, indicating that it can be excited by visible light （2〈794.87 nm）. And characterization also shows that there are alkyl groups on its surface. It takes 40 rain to improve the biodegradability of dyestuff wastewater. Five-day biochemical oxygen demand （BODs） and dehydrogenase activity （DHA） of wastewater reach the maximum value when dissolved oxygen is higher than 2.97 mg/L. SBR reactor was used to treat this biodegradability improved wastewater. Chemical oxygen demand （COD） and colority decline to 72 mg/L and 20 times, respectively, when the sludge loading is 0.179 kg（COD）/[kg（MLSS）＇d], dissolved oxygen is 4.09 mg/L and aeration time is 10 h.展开更多
Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, ste...Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, steady condition numerical simulation is carried out, and the change of light-off temperatures and conversion efficiency with various SO2 contents is obtained. By grey relational analysis(GRA), the relational grade between conversion efficiency and SO2 content is obtained. And, the result shows that SO2 content has the most important influence on C3H6 and NOX conversion efficiency. This provides an important reference to the improvement of activity design of TWC, and may provide guidance for the condition design and optimization of TWC.展开更多
Mixed microorganisms with elevated activity of chalcocite-leaching were screened by mutation methods. The original microorganisms collected from acid mine drainage of different sites were mixed and then treated with m...Mixed microorganisms with elevated activity of chalcocite-leaching were screened by mutation methods. The original microorganisms collected from acid mine drainage of different sites were mixed and then treated with mutagens NO2^- , diethyl sulfate （DES）, UV and their combinations, respectively. Five groups of mixed microorganisms with much stronger ore-leaching ability were obtained by screening on the leaching media. Among them, group E of mixed microorganisms （treated with 1% DES for 60 min） with the best perfonnance on chalcocite-leaching, increases the content of Cu^2＋ by 101.4% in 20 d of leaching compared with the control culture. In addition, group E is more tolerant to Cu^2＋ in media than the control without mutation treatment. Analysis for the diversity of microbial clones indicates that half of operational taxonomic units （OTUs） in group E are Acidithiobacillus ferrooxidans. These observations suggest that group E might have potentials for industrial application.展开更多
基金Project(2022M710619)supported by the Postdoctoral Science Foundation of ChinaProjects(2020YFH0213,2020YFG0039)supported by the Sichuan Science and Technology Program,China+1 种基金Projects(XJ2024001501,KCXTD2023-4)supported by the Basic Scientific Foundation and Innovation Team Funds of China West Normal UniversityProject(CSPC202403)supported by the Open Project Program of Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province,China。
文摘In response to the fact that the presence of manganese dithionate(MnS_(2)O_(6))leads to a series of adverse impacts,especially lower purity of manganese sulfate(MnSO_(4))and disruption of its recovery,advanced oxidation methods such as ozonation system are used to manage MnS_(2)O_(6)in the leaching solution,replacing conventional methods.To ascertain the conversion rate and kinetics of MnS_(2)O_(6)during the ozonation process,we explored the factors influencing its removal rate,including ozone dosage,manganese dithionate concentration,sulfuric acid concentration,and reaction temperature.Batch experiments were conducted to determine the reaction rate constant of ozone(k)and activation energy(Ea)obtained from intermittent experimental data fitting,revealing a least-squares exponential conversion relationship between k and the MnS_(2)O_(6)removal amount,wherein an increase in the aforementioned factors led to an enhanced MnS_(2)O_(6)conversion rate,exceeding 99.3%.The formation mechanism of the ozone products proposed during the experiment was summarized and proposed as follows:1)Mn^(2+)was directly oxidized to MnO_(2),and 2)SO_(4)2−was obtained by the catalytic oxidation of S_(2)O_(6)^(2−)with HO•from O3 decomposition.According to the kinetics analysis,the pre-exponential factor and total activation energy of the ozonation kinetics equation were 1.0×10^(23) s^(−1) and 177.28 kJ/mol,respectively.Overall,the present study demonstrates that O_(3) as an oxidizing agent can effectively facilitate MnS_(2)O_(6)disproportionation while preventing the release of the secondary pollutant,SO_(2)gas.
基金Project(50904001) supported by the National Natural Science Foundation of ChinaProject(2010SQRL032D) supported by Anhui Provincial Key Science Foundation for Outstanding Young Talent,ChinaProject(TD200909) supported by Program for Innovative Research Team in Anhui University of Technology,China
文摘With the addition of urea as an inhibitor, four groups of reducing dioxin emission experiments in sintering pot were conducted. The results show that, adding 0.05%, 0.1% and 0.5% （mass fraction） urea, the emission concentrations of dioxin are 0.287 0.258 and 0.217 ng-TEQ/m3, respectively. The dioxin emission rates drop substantially compared to 0.777 ng-TEQ/m3 flee of urea. With an increase of the urea content, the concentration of SO2 emission reduces sharply. （NH4）2SO4, formed by the reaction of SO2 and NH3, goes into the dust and part of NH3 is released before reaction with the emission of exhaust gas. The NO~ emission presents an increasing trend because the reaction of NH3 and 02 at high temperature produces NOx. Based on the consideration of factors such as the effect of reducing dioxin emission, and the chemical composition of exhaust gas, 0.05% is the optimum adding content of urea.
文摘The sewage sludge was used to produce adsorbent by controlling the pyrolytic and chemical conditions. Using the adsorbent derived from sewage sludge to adsorb the low concentration SO2 in fixed bed system, the effects of the metallic derivatives on characteristics of the adsorbent were investigated at different compositions of the gaseous mixtures. The results show that when the mass fraction of vanadium reaches 0.5% and the mass fraction of （iron,） calcium, copper, nickel reach approximately 0.9%, under the condition that the adsorption mixture contains （0.12%SO2,） 3%O2 and 10% water vapor, the maximum adsorption capacity of SO2 can be obtained to be 128, 109, 90, 82, 78 mg·g-1, respectively. So the metallic derivatives fixed onto adsorbent derived from sewage sludge especially vanadium have great effects on of the sorption characteristics of the adsorbent with respect to SO2.
基金Projects(KKK0201022137,KKK0201122183) supported by the Special Research Foundation of Yunnan Provincial Environmental Protection Bureau,China
文摘Copper smelting is a significant source of SO2 emission. It is important to quantify SO2 emissions from combustion sources for regulatory and control purposes in relation to air quality. The characteristics of SO2 emissions from copper smelting industry in Yurman Province, China, were examined. Analysis based on the present situation, material balance and measuring method were used to confirm SO2 emission factors of copper smelting industry. Results show that SO2 emission factors for Isa system, side blown-continuous converting system （SB-CC）, blast furnace-continuous converting systems （B-CC） and blast furnace-converter blowing （B-C） are 11.69-18.64, 62.44--101.4, 19.43-37.88 and 45.48-81.03 kg/t（blister copper）, respectively. The comprehensive emission factor based on all smelting plants is found to be in the range of 23-39.99 kg-SO2/t（blister copper） for Yunnan Province, China. The results are compared with those for discharge coefficients of industrial pollutants in the First National General Survey of Pollution Sources and the emission factor of the total amount of major pollutants. It is observed that there are some differences among emission factors.
文摘In this paper,the combined addition of copper or iron and sulphate ions onto TiO_(2) prepared by a simple sol-gel method is studied for formic acid photocatalytic conversion.A wide structural and morphological characterization of the different photocatalysts was performed by X-ray diffraction(XRD),N_(2)-physisorption for BET surface area measurements,scanning and transmission electronic microscopies(SEM and TEM),UV-Vis diffuse spectroscopy(DRS)and X-ray photoelectron spectroscopy(XPS),in order to correlate the physico-chemical properties of the materials to their photocatalytic efficiencies for formic acid oxidation.Results have shown important differences among the catalysts depending on the metal added.Sulphated TiO_(2)/Cu(1%Cu)was the best photocatalyst obtaining about 100% formic acid conversion in only 5 min.The appropriate physico-chemical features of this photocatalyst,given by the addition of combined copper and sulphate ions,explain its excellence in photocatalytic reaction.
基金Project(201009066)supported by the R&D Special Fund for Public Welfare of the Ministry of Finance and Ministry of Science and Technology of China
文摘A decomposition model was applied to study the resource-saving and environment-friendly effects of air pollutant emissions(taking industrial SO2 emission as an example) in China.From the results,it is found that 38.93% and 61.07% are contributed to environment-friendly and resource-saving effects,respectively,by the dramatic decrease in industrial SO2 emission density(nearly 70% from 2001 to 2010).This indicates that China has achieved important progress during the 11th FYP(five-year plan) compared with the 10th FYP.A simultaneous equations model was also employed to analyze the influencing factors by using data from 30 provinces in China.The results imply that the influence of environmental regulation on environment-friendly effect is not obvious during the 10th FYP but obvious during the 11th FYP.Thus,the government should continue promoting the environment-friendly effect by further enhancing environmental regulation and strengthening the role of environmental management.
基金Project(CDJZR11210009) supported by the Fundamental Research Funds for the Central Universities of China
文摘Combined technology of SDS-CuO/TiO2 photocatalysis and sequencing batch reactor （SBR） were applied to treating dyestuff wastewater. Photocatalysis was carried out in a spiral up-flow type reactor as pre-treatment. SDS-CuO/TiO2 photocatalyst was prepared by modification of nano-TiO2 using CuO and sodium dodecyl sulfate （SDS）. Results show that the SDS-CuO/TiO2 photocatalyst contains two kinds of crystals, including TiO2 and CuO. The band gap of this photocatalyst is 1.56 eV, indicating that it can be excited by visible light （2〈794.87 nm）. And characterization also shows that there are alkyl groups on its surface. It takes 40 rain to improve the biodegradability of dyestuff wastewater. Five-day biochemical oxygen demand （BODs） and dehydrogenase activity （DHA） of wastewater reach the maximum value when dissolved oxygen is higher than 2.97 mg/L. SBR reactor was used to treat this biodegradability improved wastewater. Chemical oxygen demand （COD） and colority decline to 72 mg/L and 20 times, respectively, when the sludge loading is 0.179 kg（COD）/[kg（MLSS）＇d], dissolved oxygen is 4.09 mg/L and aeration time is 10 h.
基金Project(2009CK2001) supported by the Science & Technology Development Key Program of Hunan Province STA of ChinaProject supported by the Young Teachers Program of Hunan University,China
文摘Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, steady condition numerical simulation is carried out, and the change of light-off temperatures and conversion efficiency with various SO2 contents is obtained. By grey relational analysis(GRA), the relational grade between conversion efficiency and SO2 content is obtained. And, the result shows that SO2 content has the most important influence on C3H6 and NOX conversion efficiency. This provides an important reference to the improvement of activity design of TWC, and may provide guidance for the condition design and optimization of TWC.
基金Project(50321402)supported by the National Natural Science Foundation of ChinaProject(2004CB619201)supported by the Major State Basic Research and Development Program of China
文摘Mixed microorganisms with elevated activity of chalcocite-leaching were screened by mutation methods. The original microorganisms collected from acid mine drainage of different sites were mixed and then treated with mutagens NO2^- , diethyl sulfate （DES）, UV and their combinations, respectively. Five groups of mixed microorganisms with much stronger ore-leaching ability were obtained by screening on the leaching media. Among them, group E of mixed microorganisms （treated with 1% DES for 60 min） with the best perfonnance on chalcocite-leaching, increases the content of Cu^2＋ by 101.4% in 20 d of leaching compared with the control culture. In addition, group E is more tolerant to Cu^2＋ in media than the control without mutation treatment. Analysis for the diversity of microbial clones indicates that half of operational taxonomic units （OTUs） in group E are Acidithiobacillus ferrooxidans. These observations suggest that group E might have potentials for industrial application.
