Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthqu...Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthquake. In this paper, a three-dimensional normal fault sliding device was designed, and a shaking table test was carried out to study tunnel seismic performance under normal fault slip. The results show that peak acceleration of lining is dominated by an existence of fault and direction of seismic excitation, not normal fault slip. And the incremental strains of lining in critical zone with 1.7 times fault thickness and centered in faults induced by normal fault slip and seismic excitation are larger than ones only by seismic excitation. And the incremental strains in critical zone increase with the increase of normal fault slip magnitude ranging from 0 to 2 mm. And normal fault slip results in a significant reduction of overall tunnel stiffness subjected to an earthquake. These experimental results provide a scientific reference for prevention and control measurement of tunnel damage under earthquake and normal fault slip.展开更多
Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of r...Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of rock masses in active fault zones which have been investigated previously are the key design basis for such projects.Therefore,a discrete element numerical model with different fault types,slip time,dip angles,and complex geological features was established,and then the creep slip for normal,reverse,and strike-slip faults were simulated to analyze the displacement distribution in the fault rock mass.A disk rotation test system and the corresponding laboratory test method were developed for simulating rock mass displacement induced by creep slippage of faults.A series of rotation tests for softand hard-layered specimens under combined compression and torsional stress were conducted to verify the numerical results and analyze the factors influencing the displacement distribution.An S-shaped displacement distribution independent of fault dip angle was identified corresponding to reverse,normal,and strike-slip faults.The results indicated that the higher the degree of horizontal extrusion,the softer the rock mass at the fault core,and the higher the degree of displacement concentration in the fault core;about 70%of the creep slip displacement occurs within this zone under 100 years of creep slippage.展开更多
Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments...Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments\|NW section and SE section: the construction of the former is single and a main fault; the construction of the latter is complex and composed by three parallel faults, its main fault is named as Selaha—Kangding fault, which distributes along Jinlongsi, Sehala, Mugecuo and Kangding. Yalahe fault, located at the NE direction of the main fault, and Zeduotang fault, located at the SW direction of the main fault, are all secondary faults, which are 9～13km away from the main fault. At the south of Kangding, the segment of Xianshuihe fault is a single main section, called as Moxi fault. On the basis of recent researching results, this paper mainly discusses the slip rate and recurrence interval of strong earthquake of the SE segment (Qianning—Kangding) on Xianshuihe.展开更多
The NEE\|striking Altyn Tagh Fault (ATF) has been well known as one major point to know the growth history of the Tibetan plateau. Lots of investigations done since 1970’s were mostly focus on active features, partic...The NEE\|striking Altyn Tagh Fault (ATF) has been well known as one major point to know the growth history of the Tibetan plateau. Lots of investigations done since 1970’s were mostly focus on active features, particularly on determining slip, slip rate and their distribution along the fault. However, Cenozoic slip\|history of this fault remains poorly understood, and the age of initiation and total offset are controversial. Several Cenozoic sedimentary basins develop in Suo’erkulinan to Mangya regions (Fig.1). Their sedimentary processes are closely related with the ATF. The studies of the Neogene sedimentary sequences and the reconstruction of the paleo\|geography are essential to establish the displacement history of the fault during Late Cenozoic.Located at the southern side of the ATF, the Suo’erkulinan basin consists of more than 600\|meter\|thick Pliocene Shizigou Formation below and about 120\|meter\|thick Early to Middle Pleistocene Qigequan Formation above according to the 1∶200000 geological map by Xinjiang Province. An obvious erosional surface can be seen on the top of the lower sequence. Sediments in the Shizigou Formation are characterized by 400\|meter\|thick yellow to red cobble\|sized conglomerates in the bottom, up\|grading to sandstones and grey\|green mudstones. This indicated that the sedimentary facies changed from alluvial fan to fluvial fan and sediments became more and more mature. The upper sequence, the Qigequan Formation, corresponds to an alluvial facies series composed of yellow to white cobble\|sized conglomerates intercalated with lenticular sandstones. Paleo\|current indicators showed that the Shizhigou conglomeratic series were sourced from northwest. Well\|developed syn\|sedimentary faults, normal faults mostly inherited from syn\|sedimentary faults, and some striation lineations on the surface indicated transtensional tectonic environment of the strike\|slip faulting.展开更多
The geometry of the Qianning-Kangding segment of the Xianshuihe fault zone is quite complex, and it is composed of four secondary-faults, i.e., the Yalahe fault, Selaha-Kangding fault, Zeduotang fault and Moxi fault. ...The geometry of the Qianning-Kangding segment of the Xianshuihe fault zone is quite complex, and it is composed of four secondary-faults, i.e., the Yalahe fault, Selaha-Kangding fault, Zeduotang fault and Moxi fault. On this segment, three strong earthquakes with M(7.0 occurred in 1725, 1786 and 1955, respectively. Based on a study of fault landform and geochronology (14C and Thermoluminesense), this paper documents the average horizontal slip rates during the late-Quaternary on all the secondary-faults of the Qianning-Kangding segment as follows: Yalahe fault: (2.0(0.2) mm/a; Selaha-Kangding fault: (5.5(0.6) mm/a; Zeduotang fault: (3.6(0.3) mm/a; Moxi fault: (9.9(0.6) mm/a. The results from the investigation of surface ruptures of historical earthquakes, coseismic-slip and paleo-earthquakes show that the strong-earthquake recurrence intervals are thousands of years on the Yalahe fault, and 230 to 350 years on the Selaha-Kangding and Zeduotang faults. In the next one hundred years, the recurrence of a strong-earthquake on these faults appears impossible. However, the strong-earthquake recurrence interval on the Moxi fault is about 300 years. Up to now, it has been 214 years since the last earthquake (magnitude 7) occurred in 1786, therefore, this fault is now approaching the condition favorable for the next strong earthquake recurrence.展开更多
During the collision between India and Eurasia, the continental compression and shorten is thought to be absorbed by the way of thickening of the Tibetan plateau crust and strike\|slip extrusion outwardly of blocks su...During the collision between India and Eurasia, the continental compression and shorten is thought to be absorbed by the way of thickening of the Tibetan plateau crust and strike\|slip extrusion outwardly of blocks surrounding the Tibetan plateau. A series of models have been proposed recently, of which the most typical one is continental blocks extrusion by Tapponnier et al.. Virtually previous studies show that the Red River—Ailaoshan fault is the eastern boundary of extrusion Indochina displaced southward relative to South China about 23 Ma ago, and more, the western boundary of extrusion blocks is inferred to be Sijie fault in the eastern Burma. But the movement age of Sijie fault is around 13 Ma inferred from the age of Andeman Sea formation and different from that of the Red River—Ailaoshan fault. It is an important scientific problem where the western boundary of extrusion blocks is.展开更多
基金Project(51674287)supported by the National Natural Science Foundation of China。
文摘Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthquake. In this paper, a three-dimensional normal fault sliding device was designed, and a shaking table test was carried out to study tunnel seismic performance under normal fault slip. The results show that peak acceleration of lining is dominated by an existence of fault and direction of seismic excitation, not normal fault slip. And the incremental strains of lining in critical zone with 1.7 times fault thickness and centered in faults induced by normal fault slip and seismic excitation are larger than ones only by seismic excitation. And the incremental strains in critical zone increase with the increase of normal fault slip magnitude ranging from 0 to 2 mm. And normal fault slip results in a significant reduction of overall tunnel stiffness subjected to an earthquake. These experimental results provide a scientific reference for prevention and control measurement of tunnel damage under earthquake and normal fault slip.
基金Project(U1865203)supported by the Key Projects of the Yalong River Joint Fund of the National Natural Science Foundation of ChinaProjects(41941018,51879135)supported by the National Natural Science Foundation of China。
文摘Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of rock masses in active fault zones which have been investigated previously are the key design basis for such projects.Therefore,a discrete element numerical model with different fault types,slip time,dip angles,and complex geological features was established,and then the creep slip for normal,reverse,and strike-slip faults were simulated to analyze the displacement distribution in the fault rock mass.A disk rotation test system and the corresponding laboratory test method were developed for simulating rock mass displacement induced by creep slippage of faults.A series of rotation tests for softand hard-layered specimens under combined compression and torsional stress were conducted to verify the numerical results and analyze the factors influencing the displacement distribution.An S-shaped displacement distribution independent of fault dip angle was identified corresponding to reverse,normal,and strike-slip faults.The results indicated that the higher the degree of horizontal extrusion,the softer the rock mass at the fault core,and the higher the degree of displacement concentration in the fault core;about 70%of the creep slip displacement occurs within this zone under 100 years of creep slippage.
文摘Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments\|NW section and SE section: the construction of the former is single and a main fault; the construction of the latter is complex and composed by three parallel faults, its main fault is named as Selaha—Kangding fault, which distributes along Jinlongsi, Sehala, Mugecuo and Kangding. Yalahe fault, located at the NE direction of the main fault, and Zeduotang fault, located at the SW direction of the main fault, are all secondary faults, which are 9～13km away from the main fault. At the south of Kangding, the segment of Xianshuihe fault is a single main section, called as Moxi fault. On the basis of recent researching results, this paper mainly discusses the slip rate and recurrence interval of strong earthquake of the SE segment (Qianning—Kangding) on Xianshuihe.
基金theprogramsof ( 1)theYoungGeologistsFoundationoftheMGMR (No .Qn979812 ) ( 2 )theNational(No .G19980 4 0 80 0 ) and ( 3)the
文摘The NEE\|striking Altyn Tagh Fault (ATF) has been well known as one major point to know the growth history of the Tibetan plateau. Lots of investigations done since 1970’s were mostly focus on active features, particularly on determining slip, slip rate and their distribution along the fault. However, Cenozoic slip\|history of this fault remains poorly understood, and the age of initiation and total offset are controversial. Several Cenozoic sedimentary basins develop in Suo’erkulinan to Mangya regions (Fig.1). Their sedimentary processes are closely related with the ATF. The studies of the Neogene sedimentary sequences and the reconstruction of the paleo\|geography are essential to establish the displacement history of the fault during Late Cenozoic.Located at the southern side of the ATF, the Suo’erkulinan basin consists of more than 600\|meter\|thick Pliocene Shizigou Formation below and about 120\|meter\|thick Early to Middle Pleistocene Qigequan Formation above according to the 1∶200000 geological map by Xinjiang Province. An obvious erosional surface can be seen on the top of the lower sequence. Sediments in the Shizigou Formation are characterized by 400\|meter\|thick yellow to red cobble\|sized conglomerates in the bottom, up\|grading to sandstones and grey\|green mudstones. This indicated that the sedimentary facies changed from alluvial fan to fluvial fan and sediments became more and more mature. The upper sequence, the Qigequan Formation, corresponds to an alluvial facies series composed of yellow to white cobble\|sized conglomerates intercalated with lenticular sandstones. Paleo\|current indicators showed that the Shizhigou conglomeratic series were sourced from northwest. Well\|developed syn\|sedimentary faults, normal faults mostly inherited from syn\|sedimentary faults, and some striation lineations on the surface indicated transtensional tectonic environment of the strike\|slip faulting.
基金Chinese Joint Seismological Science Foundation (95-07-0425).
文摘The geometry of the Qianning-Kangding segment of the Xianshuihe fault zone is quite complex, and it is composed of four secondary-faults, i.e., the Yalahe fault, Selaha-Kangding fault, Zeduotang fault and Moxi fault. On this segment, three strong earthquakes with M(7.0 occurred in 1725, 1786 and 1955, respectively. Based on a study of fault landform and geochronology (14C and Thermoluminesense), this paper documents the average horizontal slip rates during the late-Quaternary on all the secondary-faults of the Qianning-Kangding segment as follows: Yalahe fault: (2.0(0.2) mm/a; Selaha-Kangding fault: (5.5(0.6) mm/a; Zeduotang fault: (3.6(0.3) mm/a; Moxi fault: (9.9(0.6) mm/a. The results from the investigation of surface ruptures of historical earthquakes, coseismic-slip and paleo-earthquakes show that the strong-earthquake recurrence intervals are thousands of years on the Yalahe fault, and 230 to 350 years on the Selaha-Kangding and Zeduotang faults. In the next one hundred years, the recurrence of a strong-earthquake on these faults appears impossible. However, the strong-earthquake recurrence interval on the Moxi fault is about 300 years. Up to now, it has been 214 years since the last earthquake (magnitude 7) occurred in 1786, therefore, this fault is now approaching the condition favorable for the next strong earthquake recurrence.
文摘During the collision between India and Eurasia, the continental compression and shorten is thought to be absorbed by the way of thickening of the Tibetan plateau crust and strike\|slip extrusion outwardly of blocks surrounding the Tibetan plateau. A series of models have been proposed recently, of which the most typical one is continental blocks extrusion by Tapponnier et al.. Virtually previous studies show that the Red River—Ailaoshan fault is the eastern boundary of extrusion Indochina displaced southward relative to South China about 23 Ma ago, and more, the western boundary of extrusion blocks is inferred to be Sijie fault in the eastern Burma. But the movement age of Sijie fault is around 13 Ma inferred from the age of Andeman Sea formation and different from that of the Red River—Ailaoshan fault. It is an important scientific problem where the western boundary of extrusion blocks is.
