期刊文献+
共找到69,523篇文章
< 1 2 250 >
每页显示 20 50 100
The relationship between the high-frequency performance of supercapacitors and the type of doped nitrogen in the carbon electrode 被引量:2
1
作者 FAN Ya-feng YI Zong-lin +6 位作者 ZHOU Yi XIE Li-jing SUN Guo-hua WANG Zhen-bing Huang Xian-hong SU Fang-yuan CHEN Cheng-meng 《新型炭材料(中英文)》 SCIE EI CAS CSCD 北大核心 2024年第5期1015-1026,共12页
Nitrogen doping has been widely used to improve the performance of carbon electrodes in supercapacitors,particularly in terms of their high-frequency response.However,the charge storage and electrolyte ion response me... Nitrogen doping has been widely used to improve the performance of carbon electrodes in supercapacitors,particularly in terms of their high-frequency response.However,the charge storage and electrolyte ion response mechanisms of different nitrogen dopants at high frequencies are still unclear.In this study,melamine foam carbons with different configurations of surfacedoped N were formed by gradient carbonization,and the effects of the configurations on the high-frequency response behavior of the supercapacitors were analyzed.Using a combination of experiments and first-principle calculations,we found that pyrrolic N,characterized by a higher adsorption energy,increases the charge storage capacity of the electrode at high frequencies.On the other hand,graphitic N,with a lower adsorption energy,increases the speed of ion response.We propose the use of adsorption energy as a practical descriptor for electrode/electrolyte design in high-frequency applications,offering a more universal approach for improving the performance of N-doped carbon materials in supercapacitors. 展开更多
关键词 High-frequency supercapacitors Carbon electrodes Doped nitrogen species Adsorption energy DESCRIPTOR
在线阅读 下载PDF
Schur Forms and Normal-Nilpotent Decompositions 被引量:1
2
作者 LI Zhen 《应用数学和力学》 CSCD 北大核心 2024年第9期1200-1211,共12页
Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,su... Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,such as the triple decomposition of motion(TDM)and normal-nilpotent decomposition(NND),have been proposed to analyze the local motions of fluid elements.However,due to the existence of different types and non-uniqueness of Schur forms,as well as various possible definitions of NNDs,confusion has spread widely and is harming the research.This work aims to clean up this confusion.To this end,the complex and real Schur forms are derived constructively from the very basics,with special consideration for their non-uniqueness.Conditions of uniqueness are proposed.After a general discussion of normality and nilpotency,a complex NND and several real NNDs as well as normal-nonnormal decompositions are constructed,with a brief comparison of complex and real decompositions.Based on that,several confusing points are clarified,such as the distinction between NND and TDM,and the intrinsic gap between complex and real NNDs.Besides,the author proposes to extend the real block Schur form and its corresponding NNDs for the complex eigenvalue case to the real eigenvalue case.But their justification is left to further investigations. 展开更多
关键词 Schur form normal matrix nilpotent matrix tensor decomposition vortex identification
在线阅读 下载PDF
融合卷积CR-FFD与偏置Transformer胶囊网络的单视图三维物体重建
3
作者 连远锋 赵泽欣 《计算机辅助设计与图形学学报》 北大核心 2025年第4期623-634,共12页
针对复杂拓扑结构物体单视图三维重建过程中二维图像与三维形状之间难以准确映射的问题,提出一种融合卷积Catmull-Rom样条自由形变(CR-FFD)与偏置Transformer胶囊网络的单视图三维重建方法.首先通过Catmull-Rom样条基函数对点云模型控... 针对复杂拓扑结构物体单视图三维重建过程中二维图像与三维形状之间难以准确映射的问题,提出一种融合卷积Catmull-Rom样条自由形变(CR-FFD)与偏置Transformer胶囊网络的单视图三维重建方法.首先通过Catmull-Rom样条基函数对点云模型控制点进行插值,保持点云模型形变局部拓扑结构的一致性;然后提出卷积神经网络最小二乘求逆解法,通过非线性参数映射加速求解过程;最后设计偏置注意力Transformer胶囊网络增强局部特征表达能力,捕获点云形状的细粒度特征.实验结果表明,在ShapeNet数据集上,所提方法的EMD指标平均值为3.84, CD指标平均值为3.71;在Pix3D数据集上, EMD指标平均值为5.51, CD指标平均值为5.39;与已有的单视图点云三维重建方法相比,该方法有效地提升单视图的三维重建结果,能够从不同角度保持重建的一致性. 展开更多
关键词 CATMULL-ROM样条 自由形变 三维重建 胶囊网络 偏置注意力
在线阅读 下载PDF
Bioaccumulation,subcellular distribution and chemical forms of cadmium in Aster subulatus Michx.
4
作者 LIANG Xue-lian CHEN Wei +7 位作者 JIANG Wen-yan LIAO Jie YANG Yu-xia WANG Hai-jun LI Hui-ling LU Wei-fan WANG Tian-shun XIE Hong-zhao 《南方农业学报》 CAS CSCD 北大核心 2024年第8期2386-2395,共10页
【Objective】Through analyzing the bioaccumulation capacity,subcellular distribution and chemical forms of cadmium(Cd)in Aster subulatus Michx.,this study was to provide reference for revealing the Cd tolerance mechan... 【Objective】Through analyzing the bioaccumulation capacity,subcellular distribution and chemical forms of cadmium(Cd)in Aster subulatus Michx.,this study was to provide reference for revealing the Cd tolerance mechanism of A.subulatus Michx.【Method】After cultured for 24 d under the action of Hoagland nutrient solution and gradient Cd concentrations(0,30,60 and 90 mg/L),A.subulatus Michx.were harvested,and its leaf,stem and root were treated by differential centrifugation,chemical reagent extraction,and digested with graphite digester,respectively,then the Cd content in the root,stem and leaf were determined by atomic absorption spectroscopy.【Result】The experimental results indicated that the bioaccumulation capacity of Cd in A.subulatus Michx.was root>stem>leaf,and the maximum Cd concentration in the root,stem and leaf of A.subulatus Michx.were 130.74,78.69 and 56.62 mg/kg(fresh matter),respectively.Most of Cd stored in the cell wall and the soluble fractions of the root and leaf of A.subulatus Michx.,with only a smaller portion Cd in organelle fraction.Analysis result of subcellular Cd content showed that 52.27%-58.61%of Cd for root was mainly stored in the soluble fraction,but 42.10%-63.28%of Cd for leaf was mainly stored in the cell wall fraction.The concentration of pectates and protein integrated-Cd was higher in the root and leaf compared to other chemical forms Cd.Pectates and protein integrated-Cd was the main chemical forms Cd in the root and leaf of A.subulatus Michx.,and their percentages were 68.91%-74.80%and 57.38%-83.80%,respectively.Cd treatment could significantly increase the proportion of water-soluble organic acid Cd from 13.64%to 22.72%in root and undissolved phosphate Cd from 10.02%to 32.78%in leaf with increasing Cd concentration in the culture medium.【Conclusion】The root,stem and leaf of A.subulatus Michx.has strong bioaccumulation capacity to Cd,Cd is primarily stored in the soluble fractions of the root and cell wall fractions of the leaf,and less toxic pectates and protein integrated-Cd is the main chemical forms Cd in the root and leaf of A.subulatus Michx.,this might be the main mechanism of Cd tolerance in A.subulatus Michx. 展开更多
关键词 Aster subulatus Michx. CADMIUM BIOACCUMULATION chemical form subcellular distribution
在线阅读 下载PDF
基于微型光谱仪和Transformer模型的便携式土壤全氮含量检测仪研究
5
作者 剧伟良 杨玮 +2 位作者 宋亚美 刘楠 李民赞 《农业机械学报》 北大核心 2025年第6期268-276,共9页
便携式土壤全氮含量近红外光谱检测仪具有快速、非破坏性和高效性等优点,但已开发的仪器多采用滤光片式设计,光谱通道数量有限会导致部分关键信息丢失,且无法采用基于深度学习的预测模型。随着微型光谱仪的商业化,本文开发了基于连续光... 便携式土壤全氮含量近红外光谱检测仪具有快速、非破坏性和高效性等优点,但已开发的仪器多采用滤光片式设计,光谱通道数量有限会导致部分关键信息丢失,且无法采用基于深度学习的预测模型。随着微型光谱仪的商业化,本文开发了基于连续光谱的高精度土壤全氮含量检测仪。检测仪主要由NIR-R210型微型光谱仪、树莓派、触控屏、移动电源构成,利用微型光谱仪获取土壤光谱反射率,利用树莓派中嵌入的深度学习模型进行土壤全氮含量预测,然后在显示屏中输出预测结果。在中国农业大学上庄实验站采集了600份土壤样本,分别对偏最小二乘法、门控循环单元和Transformer 3种模型的预测性能进行了对比分析。结果表明,基于全光谱数据的Transformer深度学习模型表现最好,模型决定系数R^(2)为0.89,均方根误差(RMSE)为0.19 g/kg,预测偏差(RPD)为2.96。进一步对检测仪进行田间实时原位测试,田间环境下预测结果R^(2)可达0.83,精度较高,可为智慧农业中土壤养分实时检测与精准管理提供新的解决方案。 展开更多
关键词 土壤全氮 近红外 Transformer 深度学习 树莓派
在线阅读 下载PDF
Annealing temperature influence on forming limit curve and fracture toughness of aluminium/silver bilayer sheets 被引量:1
6
作者 Mohammad Delshad GHOLAMI Mojtaba KHODAKARAMI +1 位作者 Mohammad ABADIAN Ramin HASHEMI 《Journal of Central South University》 2025年第1期34-48,共15页
This article examines the influence of annealing temperature on fracture toughness and forming limit curves of dissimilar aluminum/silver sheets.In the cold roll bonding process,after brushing and acid washing,the pre... This article examines the influence of annealing temperature on fracture toughness and forming limit curves of dissimilar aluminum/silver sheets.In the cold roll bonding process,after brushing and acid washing,the prepared surfaces are placed on top of each other and by rolling with reduction more than 50%,the bonding between layers is established.In this research,the roll bonding process was done at room temperature,without the use of lubricants and with a 70%thickness reduction.Then,the final thickness of the Ag/Al bilayer sheet reached 350μm by several stages of cold rolling.Before cold rolling,it should be noted that to decrease the hardness created due to plastic deformation,the roll-bonded samples were subjected to annealing heat treatment at 400℃for 90 min.Thus,the final samples were annealed at 200,300 and 400℃for 90 min and cooled in a furnace to examine the annealing temperature effects.The uniaxial tensile and microhardness tests measured mechanical properties.Also,to investigate the fracture mechanism,the fractography of the cross-section was examined by scanning electron microscope(SEM).To evaluate the formability of Ag/Al bilayer sheets,forming limit curves were obtained experimentally through the Nakazima test.The resistance of composites to failure due to cracking was also investigated by fracture toughness.The results showed that annealing increases the elongation and formability of the Ag/Al bilayer sheet while reduces the ultimate tensile strength and fracture toughness.However,the changing trend is not the same at different temperatures,and according to the results,the most significant effect is obtained at 300℃and aluminum layers.It was also determined that by increasing annealing temperature,the fracture mechanism from shear ductile with small and shallow dimples becomes ductile with deep cavities. 展开更多
关键词 cold roll bonding Ag/Al bilayer sheet mechanical properties forming limit curve fracture toughness
在线阅读 下载PDF
基于Deform的弯链板U弯成形分析及模具参数优化
7
作者 汪永明 孙永文 连润柱 《塑性工程学报》 北大核心 2025年第6期79-86,共8页
针对弯链板在U弯成形过程中产生的向外弯曲现象,基于Deform软件在其U弯凹模上分别建立了无预弯块和有预弯块的2组U弯成形有限元仿真模型,仿真结果表明:有预弯块的U弯凹模对工件的向外弯曲变形有着很大的改善作用。建立了5组不同预弯块... 针对弯链板在U弯成形过程中产生的向外弯曲现象,基于Deform软件在其U弯凹模上分别建立了无预弯块和有预弯块的2组U弯成形有限元仿真模型,仿真结果表明:有预弯块的U弯凹模对工件的向外弯曲变形有着很大的改善作用。建立了5组不同预弯块间距的U弯成形有限元仿真模型,分析不同预弯块间距对工件的台阶面间距和平行度的影响,根据仿真结果对比:当预弯块间距为75 mm时,U弯成形件的成形效果最佳,此时其台阶面间距为38.36 mm,台阶面向内弯曲夹角为0.1°。取预弯块间距为最佳值75 mm时,分别研究了不同的U弯间隙与凹模圆角半径对工件U弯成形效果的影响,得出其最佳U弯间隙为5.15 mm,最佳凹模圆角半径为10 mm。基于优化后的模具参数进行了U弯成形实验,依据实验结果,U弯成形件的窄端面间距为27.41~27.47 mm,台阶面间距为38.45~38.61 mm,台阶面夹角为-0.14°~0.27°,实验结果满足U弯成形的工艺要求,有效解决了弯链板在U弯成形过程中的向外弯曲现象。 展开更多
关键词 弯链板 U弯成形 Deform仿真 模具改进 参数优化
在线阅读 下载PDF
Enhanced permeability mechanism in coal seams through liquid nitrogen immersion:multi-scale pore structure analysis
8
作者 LI Xue-long CHEN De-you +5 位作者 LIU Shu-min WANG Deng-ke SUN Hai-tao YIN Da-wei ZHANG Yong-gang GONG Bin 《Journal of Central South University》 2025年第7期2732-2749,共18页
The geological structure of coal seams in China is remarkably varied and complex,with coalbed methane reservoirs marked by significant heterogeneity and low permeability,creating substantial technical challenges for e... The geological structure of coal seams in China is remarkably varied and complex,with coalbed methane reservoirs marked by significant heterogeneity and low permeability,creating substantial technical challenges for efficient extraction.This study systematically investigates the impact of liquid nitrogen immersion(LNI)on the coal’s pore structure and its mechanism of enhancing permeability with a combination of quantitative nuclear magnetic resonance(NMR)analysis,nitrogen adsorption experiments,and fractal dimension calculations.The results demonstrate that LNI can damage the coal’s pore structure and promote fracture expansion through thermal stress induction and moisture phase transformation,thereby enhancing the permeability of coal seams.The T_(2)peak area in the NMR experiments on coal samples subjected to LNI treatment shows a significant increase,the Brunauer-Emmett-Teller(BET)specific surface area decreases to 6.02 m^(2)/g,and the Barrett-Joyner-Halenda(BJH)total pore volume increases to 14.99 mm^(3)/g.Furthermore,changes in fractal dimensions(D_(1)rising from 2.804 to 2.837,and D_(2)falling from 2.757 to 2.594)indicate a notable enhancement in the complexity of the pore structure.With increasing LNI cycles,the adsorption capacity of the coal samples diminishes,suggesting a significant optimization of the pore structure.This optimization is particularly evident in the reconstruction of the micropore structure,which in turn greatly enhances the complexity and connectivity of the sample’s pore network.In summary,the study concludes that LNI technology can effectively improve the permeability of coal seams and the extraction efficiency of coalbed methane by optimizing the micropore structure and enhancing pore connectivity,which offers a potential method for enhancing the permeability of gas-bearing coal seams and facilitating the development and utilization of coalbed methane. 展开更多
关键词 liquid nitrogen immersion(LNI) coal seam pore structure PERMEABILITY nuclear magnetic resonance(NMR) fractal dimension
在线阅读 下载PDF
Insights from model plants to improve cotton’s use of nitrogen and phosphorus
9
作者 PU Yuanchun WANG Peilin +6 位作者 ABBAS Mubashir IQBAL Asif DONG Qiang LUO Tong WANG Qianqian CAO Fei SONG Meizhen 《Journal of Cotton Research》 2025年第2期290-301,共12页
Nitrogen(N)and phosphorus(P)are mineral nutrients essential for plant growth and development,playing a crucial role throughout the plant life cycle.Cotton,a globally significant textile crop,has a particularly high de... Nitrogen(N)and phosphorus(P)are mineral nutrients essential for plant growth and development,playing a crucial role throughout the plant life cycle.Cotton,a globally significant textile crop,has a particularly high demand for N fertilizer across its developmental stages.This review explores the effects of adequate or deficient N and P levels on cotton growth phases,focusing on their influence on physiological processes and molecular mechanisms.Key topics include the regulation of N-and P-related enzymes,hormones,and genes,as well as the complex interplay of N-and P-related signaling pathways from the aspects of N-P signaling integration to regulate root development,N-P signaling integration to regulate nutrient uptake,and regulation of N-P interactions—a frontier in current research.Strategies for improving N and P use efficiency are also discussed,including developing high-efficiency cotton cultivars and identifying functional genes to enhance productivity.Generally speaking,we take model plants as a reference in the hope of coming up with new strategies for the efficient utilization of N and P in cotton. 展开更多
关键词 nitrogen use efficiency(NUE) Phosphorus use efficiency(PUE) Cultivation improvement nitrogenphosphorus transport mechanisms nitrogen-phosphorus interaction
在线阅读 下载PDF
针对ASP.net Forms认证的异源重放攻击研究及应对 被引量:2
10
作者 孙伟 张永 王占 《计算机应用与软件》 CSCD 2015年第10期315-319,共5页
采用Forms认证的ASP.net网站容易受到重放攻击的威胁。介绍ASP.net Forms认证一般性实施方法,分析Forms认证的原理,给出重放攻击的原理性实施方法,并对重放攻击得逞的原因进行分析。在此基础上,通过引入更加严谨的会话概念,提出基于会... 采用Forms认证的ASP.net网站容易受到重放攻击的威胁。介绍ASP.net Forms认证一般性实施方法,分析Forms认证的原理,给出重放攻击的原理性实施方法,并对重放攻击得逞的原因进行分析。在此基础上,通过引入更加严谨的会话概念,提出基于会话识别的异源重放攻击应对方案。该方案通过对会话的严格管理,识别客户端的变化,适时地要求用户输入原始认证信息,例如,用户名和密码,进行身份认证,达到应对重放攻击的目的。最后,代码实现和理论分析均表明,所提出的应对方案能够有效地应对异源重放攻击。 展开更多
关键词 ASP.NET forms 认证 重放攻击 异源重放攻击
在线阅读 下载PDF
基于AK-FORM方法和降维方法的高效时变可靠度分析方法
11
作者 张亮 唐亚可 +2 位作者 牛凯 李昊宇 余书君 《土木与环境工程学报(中英文)》 北大核心 2025年第3期162-170,共9页
PHI2方法是进行结构时变可靠度分析的常用方法,而跨越率的求解是该方法的关键,为达到足够精度往往需要计算大量时刻处的跨越率,然而,对于具有复杂极限状态面的实际问题,计算每个时刻的跨越率可能非常耗时。为进一步提高PHI2方法的效率,... PHI2方法是进行结构时变可靠度分析的常用方法,而跨越率的求解是该方法的关键,为达到足够精度往往需要计算大量时刻处的跨越率,然而,对于具有复杂极限状态面的实际问题,计算每个时刻的跨越率可能非常耗时。为进一步提高PHI2方法的效率,引入3种策略改进跨越率的计算效率:首先,采用无Cholesky分解策略以减少随机变量数目,并给出与之对应的相关系数计算方法;其次,引入基于主动学习Kriging模型的改进一次可靠度(AK-FORM)方法,以高效计算各时刻的可靠指标;最后,利用降维方法将二维积分转化为一维积分,以改善计算性能。将上述3种改进策略与PHI2方法相结合,形成基于AK-FORM方法和降维方法的高效时变可靠度分析方法,即KPHI2方法。与此同时,仅将无Cholesky分解策略与PHI2方法结合,形成PHI2-方法。数值算例和工程算例计算结果表明:提出的PHI2-、K-PHI2方法与PHI2方法一样具有高准确性,在精度上均优于PHI2+方法(一种基于PHI2的改进方法);相较于PHI2、PHI2+方法,PHI2-方法在效率上有一定提升,而K-PHI2方法在此基础上进一步提高了时变可靠度分析效率。 展开更多
关键词 时变可靠度 PHI2方法 一次可靠度方法 KRIGING模型 跨越率 降维方法
在线阅读 下载PDF
Oracle * Forms 4.5中查询功能的实现 被引量:1
12
作者 钟映梅 刘绍中 +1 位作者 冯鲲 范双成 《计算机应用》 CSCD 1998年第2期60-61,共2页
本文详细介绍了Oracle*Forms4.5中查询模式的功能,指出了其中所存在的子表不能对主表进行查询的问题。并对该问题给出了一种行之有效的解决方法。
关键词 查询模式 查询 Oracle*forms 数据库
在线阅读 下载PDF
Oracle*Forms与Oracle*Reports的集成技术 被引量:1
13
作者 刘义 《计算机工程与应用》 CSCD 北大核心 1998年第12期3-6,共4页
该文将研究Oracle*Forms与Oracle*Reports的集成技术,并结合实例着重介绍FORMS应用向REPORTS应用传递文本参数和数据参数的方法。
关键词 forms REPORTS 集成 数据参数 数据库
在线阅读 下载PDF
基于XML的Forms身份验证研究与实现
14
作者 马海峰 秦桂英 《现代电子技术》 2009年第16期60-62,共3页
通过对ASP.NET提供的Forms身份验证方式的特点和工作原理进行分析,研究了在Web应用程序中实现基于XML的Forms身份验证步骤;利用存储在XML文件中的用户凭证信息,实现Web应用程序对拒绝匿名访问资源进行Forms身份验证程序的设计。实例说明... 通过对ASP.NET提供的Forms身份验证方式的特点和工作原理进行分析,研究了在Web应用程序中实现基于XML的Forms身份验证步骤;利用存储在XML文件中的用户凭证信息,实现Web应用程序对拒绝匿名访问资源进行Forms身份验证程序的设计。实例说明,采用基于XML的Forms身份验证方式,既可以大大简化Web应用程序中用户身份验证模块的设计,也可以方便灵活地应用于Web应用程序中。 展开更多
关键词 ASP.NET XML forms 身份验证
在线阅读 下载PDF
XForms——下一代的Web窗体 被引量:7
15
作者 张昱 《小型微型计算机系统》 CSCD 北大核心 2003年第9期1658-1664,共7页
综述了下一代 Web窗体—— XForms技术 .对 XForms的窗体定义思想以及处理模型给予了阐述 ;说明了XForms与其它 XML 技术之间的关系和现状 ;调研总结了 XForms实现所依赖的浏览器和 API接口 .最后简要分析、评述了
关键词 窗体 Xforms 模式 模型 用户界面
在线阅读 下载PDF
Oracle*Forms与Oracle*Graphics的集成技术
16
作者 刘义 高文 《计算机应用与软件》 CSCD 北大核心 2001年第10期15-17,64,共4页
本文将研究Oracle * Forms与Oracle * Graphics集成的作用和机制,并结合典型实例着重介绍使用OG.PLL.集成Oracle *Forms与Oracle * Graphics的方法和步骤。
关键词 文本参数 数据参数 Oracle*forms Oracle*Graphics 集成 数据库
在线阅读 下载PDF
ORACLESQL*FORMS触发器运行分析
17
作者 刘智斌 《广西科学》 CAS 1997年第4期303-305,共3页
对ORACLESQL*FORMS触发器运行的分析,表明触发器的运行机制与普通的程序设计技术既有相似之处,又有区别。
关键词 ORACLE SQL*forms 触发器 程序设计 运行机制
在线阅读 下载PDF
如何把SQL*Forms3.0的应用转换到OracleForms4.0
18
作者 罗铁坚 陈霞 《计算机应用》 CSCD 1996年第3期62-64,共3页
OracleForms4.0是新一代面向对象的数据库开发工具。本文讨论从SQL*Forms3.0字符方式的应用转到OracleForms4.0基于GUI的应用时所遇到的问题。本文先介绍转换命令,然后介绍OracleF... OracleForms4.0是新一代面向对象的数据库开发工具。本文讨论从SQL*Forms3.0字符方式的应用转到OracleForms4.0基于GUI的应用时所遇到的问题。本文先介绍转换命令,然后介绍OracleForms4.0的新特性,最后讨论触发子。 展开更多
关键词 SQL*forms ORACLE forms 面向对象
在线阅读 下载PDF
Oracle Forms 中的 OLE 技术
19
作者 谢中科 戴正兵 《长沙水电师院学报(自然科学版)》 1998年第1期30-34,共5页
OLE技术是以面向对象技术为基础的开发应用程序的强有力工具,通过OLE基本概念的介绍,给出了OLE容器的生成及属性设置,值的设置方法,并且在OracleForms中用两个包来访问和操作OLE实体.
关键词 OLE form 操作系统 计算机
在线阅读 下载PDF
SQL*Forms动态菜单设计方法
20
作者 李春葆 《计算机工程与应用》 CSCD 北大核心 1992年第12期35-38,共4页
本文讨论了使用SQL*Forms触发器设计动态菜单的原理和方法,采用这种设计方法,一个FORM只需要一个菜单控制块,通过该块的数据变化和选择操作实现程序流控制。
关键词 SQL*forms 数据库 菜单 动态菜单
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部