The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infan...The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.展开更多
This study demonstrates the design and application of a novel high temperature rotatory apparatus for insitu synchrotron X-ray diffraction studies of molten salts,facilitating investigation into the interaction betwee...This study demonstrates the design and application of a novel high temperature rotatory apparatus for insitu synchrotron X-ray diffraction studies of molten salts,facilitating investigation into the interaction between various structural materials and molten salts.The apparatus enables accurate detection of every phase change during hightemperature experiments,including strong reaction processes like corrosion.Molten salts,such as chlorides or fluo⁃rides,together with the structure materials,are inserted into either quartz or boron nitride capillaries,where X-ray diffraction pattern can be continuously collected,as the samples are heated to high temperature.The replacement re⁃action,when molten ZnCl2 are etching Ti3AlC2,can be clearly observed through changes in diffraction peak intensity as well as expansion in c-axis lattice parameter of the hexagonal matrix,due to the larger atomic number and ionic ra⁃dius of Zn2+.Furthermore,we investigated the high-temperature corrosion process when GH3535 alloy is in FLiNaK molten salt,and can help to optimize its stability for potential applications in molten salt reactor.Additionally,this high temperature apparatus is fully compatible with the combined usage of X-ray diffraction and Raman technique,providing both bulk and surface structural information.This high temperature apparatus has been open to users and is extensively used at BL14B1 beamline of the Shanghai Synchrotron Radiation Facility.展开更多
Silicon(Si)diffraction microlens arrays are usually used to integrating with infrared focal plane arrays(IRFPAs)to improve their performance.The errors of lithography are unavoidable in the process of the Si diffrac-t...Silicon(Si)diffraction microlens arrays are usually used to integrating with infrared focal plane arrays(IRFPAs)to improve their performance.The errors of lithography are unavoidable in the process of the Si diffrac-tion microlens arrays preparation in the conventional engraving method.It has a serious impact on its performance and subsequent applications.In response to the problem of errors of Si diffraction microlens arrays in the conven-tional method,a novel self-alignment method for high precision Si diffraction microlens arrays preparation is pro-posed.The accuracy of the Si diffractive microlens arrays preparation is determined by the accuracy of the first li-thography mask in the novel self-alignment method.In the subsequent etching,the etched area will be protected by the mask layer and the sacrifice layer or the protective layer.The unprotection area is carved to effectively block the non-etching areas,accurately etch the etching area required,and solve the problem of errors.The high precision Si diffraction microlens arrays are obtained by the novel self-alignment method and the diffraction effi-ciency could reach 92.6%.After integrating with IRFPAs,the average blackbody responsity increased by 8.3%,and the average blackbody detectivity increased by 10.3%.It indicates that the Si diffraction microlens arrays can improve the filling factor and reduce crosstalk of IRFPAs through convergence,thereby improving the perfor-mance of the IRFPAs.The results are of great reference significance for improving their performance through opti-mizing the preparation level of micro nano devices.展开更多
The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth r...The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth ring at breast height for all sample trees. Significant variation in microfibril angle was observed among growth rings. Mean microfibril angle (MFA) at breast height varied from 7.8?to 28?between growth rings with cambial age and showed a consistent pith-to-bark trend of decline an-gles. Analysis of variance also indicated that there were significant differences in wood basic density, fiber length, fiber width and cellulose content between the growth rings, which had an increasing tendency from pith to bark. Correlations between MFA and examined wood properties were predominantly large and significant negative (?0.01), and the coefficients were -0.660 for cellulose content, -0.586 for fiber length, -0.516 for fiber width and -0.450 for wood basic density, respectively. Regression analysis with linear and curve estimation indicated that a quadratic function showed the largest R2 and the least standard error for describing the relationships between microfibril angle and measured wood properties, and the correlation coefficients were over -0.45 (n=125). The results from this study suggested that microfibril angle would be a good characteristic for improvement in the future breeding program of poplars.展开更多
A new capillary gas chromatography stationary phase, monokis (2,6 di O benzyl 3 O propyl (3’)) hexakis(2,6 di O benzyl 3 O methyl) β CD bonded polysiloxane, was synthesized. It ex...A new capillary gas chromatography stationary phase, monokis (2,6 di O benzyl 3 O propyl (3’)) hexakis(2,6 di O benzyl 3 O methyl) β CD bonded polysiloxane, was synthesized. It exhibited separation abilities to disubstituted benzene isomers and some chiral solutes. It was also found that the polarity of CD derivatives can be lowered both by chemically bonding it to polysiloxane and by diluting it in polysiloxane. The separation abilities of the polysiloxane anchored CDs (SP CD) are higher than that of the unbonded CDs (S CD) and the diluted S CD at lower column temperature. Hydrosilylation reaction is one of the best methods to lower the operating temperature of CDs.展开更多
Aim To strdy the separation of native amino acids using capillary zone electro- pboresis (CZE) with indirect ultraviolet detecition. Methods 13 native amino acids were sepa- rated by capillary electrophoresis with ind...Aim To strdy the separation of native amino acids using capillary zone electro- pboresis (CZE) with indirect ultraviolet detecition. Methods 13 native amino acids were sepa- rated by capillary electrophoresis with indirect detection . The experiments were carried out with homemade CE apparatus under the following operating conditior conditions: a fused-silica capillary col- umn of 50.0cm effect length and of 75m i.d. was used. 7 organic acids were used as BGAE, and a positive potential of separation in CZE with indirect detection. After optimizing for l3 native amino acids were established. Conclusion The choice of BGAe is an important factor influencing the efficiency of separation in CZE with indiect detection .After optimizing the separation conditions a baseline separation for 13 native amino acids is obtained.展开更多
Aim To study the chromatographis beheviors of three new cinnamyl cyclodextrin derivative stationary phases. Mehtods Three new cinnamyl β-cyclodextrins, heptakis-(2, 6-di-O-cinnamyl-3-O-methyl)-β-CD, heptakis-(2, 6-...Aim To study the chromatographis beheviors of three new cinnamyl cyclodextrin derivative stationary phases. Mehtods Three new cinnamyl β-cyclodextrins, heptakis-(2, 6-di-O-cinnamyl-3-O-methyl)-β-CD, heptakis-(2, 6-di-O-cinnamyl-3-O-acetyl-)-β-CD and heptakis-2, 6-di-O-cirinamyl-3-O-trifluoroacetyl)-β-CD were synthesized and coatal on fused-silica capillary columns . Results The new stationary phases have better thermal stability, good column efficiency and excellent mpaxation power for some sutstituted benzene positional isomers. It was found that the introduction of cinnamyl groups has a significant effect on these stationary phases. Conclusion There new subetituted β-CD compounds are very suitable to be ed as gas chromatographic stationary phases.展开更多
Aim To study the chromatographic behaviors of two dipentyl cyclodextrin derivative stationary phases. Methods Two new β-cyclodextrin derivatives, heptakis-[2, 6-di-O-pentyl-3-O-(4-nitrobenzyl)] -β-CD and heptakis-[...Aim To study the chromatographic behaviors of two dipentyl cyclodextrin derivative stationary phases. Methods Two new β-cyclodextrin derivatives, heptakis-[2, 6-di-O-pentyl-3-O-(4-nitrobenzyl)] -β-CD and heptakis-[2, 6-di-O-pentyl-3 -O-(5 -hexenyl)]-β-CD, were synthesized and coatal on fed-silica capillary columns. The chromatographic behaviors of the columns were characterized . Results It was found that the she, polarity, and aromatic property of the substituted group at the 3-position of heptakis-(2, 6 - di - O - pentyl) - β - cyclodextrins greatly influenced their chromatographic properties and separation ability. The introduction of aromatic group or a group containing a double-bond may bring π-π interactions between the host and guest molecules, and therefore increases the separation ability of the β-CDs for substituted benzene isomers. Conclusion The new substituted β-CD compounds are very suitable for being used as gas chromatogaphic stationary phases.展开更多
The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, stud...The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, studied were l：l, 1：2, l：4, 1：8, 2：1, 4：1 ＆ 8：1. The galvanic corrosion behaviour of metals was studied in terms of relative increase in the corrosion rate of aluminium due to galvanic coupling with copper, relative decrease in the corrosion rate of copper due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with copper, The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with copper. The weathering parameters and the environmental pollutants which have a major role in influencing the galvanic corrosion of metals were also monitored. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium resulting from galvanic corrosion has been highlighted in terms of pit depth, size and density of pit, using a high resolution microscope.展开更多
By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six ty...By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an mnorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting tempera- tures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.展开更多
X-ray diffraction （XRD） was used to study the structure of the organic crystallite unit （La, Lo doo2） in coals collected from Henan and Shanxi Provinces. XRD patterns of coal were collected in a step-scan mode （0...X-ray diffraction （XRD） was used to study the structure of the organic crystallite unit （La, Lo doo2） in coals collected from Henan and Shanxi Provinces. XRD patterns of coal were collected in a step-scan mode （0.1 °/step） over an angular range of 2-90° （20）, allowing 8 s at each step. The structure of the crystallite unit was determined from the Scherrer equation and peak parameters deduced from whole pattern fitting. The results show that the structure of the crystallite unit in coal is mainly controlled by the coal rank. As the coal rank increases the average diameter of a coal crystallite unit （La） increases, the interlayer spacing （doo2） decreases slightly, and the average height of a coal crystallite unit （Lc） increases at first but then decreases. A new diffraction peak from the crystallite unit in coal was found at a low scattering angle in the XRD pattern （2-10~）. This suggests a structure with an inter-layer spacing from 1.9 to 2.8 nm exists in coal crystallites.展开更多
The reactive adsorption desulfurization of model gasoline was carried out on Ni/ZnO-HY adsorbent.The Ni/ZnO-HY adsorbent was characterized by N2adsorption-desorption test(BET),X-ray diffractometry(XRD),and temperature...The reactive adsorption desulfurization of model gasoline was carried out on Ni/ZnO-HY adsorbent.The Ni/ZnO-HY adsorbent was characterized by N2adsorption-desorption test(BET),X-ray diffractometry(XRD),and temperature-programmed reduction(TPR)analysis.The test results have demonstrated that HY-zeolite is a feasible support for Ni/ZnO components used in reactive adsorption desulfurization.The results of XRD and TPR analyses showed that most of nickel element was present as Ni2+species with only a small part existing as Ni3+species,and the Ni2+species had interactions with HY-zeolite.Under the conditions of this study,which specified a 50% ratio of HY-zeolite in the adsorbent,a Zn/Ni molar ratio of 10,and a reduction temperature of 400℃,the Ni/ZnO-HY adsorbent showed the best desulfurization performance.The sulfur capacity of Ni/ZnO-HY adsorbent could be recovered to 92.19% of the fresh one after being subjected to regeneration at 500℃,and could be maintained at 82.17% of the fresh one after 5 regeneration cycles.展开更多
In order to improve the safety properties of an offloading system with side-by-side （SBS） mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. Acc...In order to improve the safety properties of an offloading system with side-by-side （SBS） mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. According to the experience of similar projects, tow strategies of different offioading arrangements were discussed by using the 3-D radiation/diffraction theory and quasi-static time domain method to assess their respective safety properties. Through the safety assessment analysis of different arrangement comparisons, various ways to improve the safety properties of off＇loading systems with side-by-side mooring were verified by analyzing the tension in the mooring lines and the fender deflection. Through comparison it can be concluded that by enlarging the key factors properly, including the size of the fenders and the hawsers as well as the number of hawsers, a better safety performance can be achieved.展开更多
The vanadium species were contaminated on FCC catalysts by using the Mitchell method. After the hydrothermal deactivation of the FCC catalysts, the cracking reaction was performed on these catalyst samples. The test r...The vanadium species were contaminated on FCC catalysts by using the Mitchell method. After the hydrothermal deactivation of the FCC catalysts, the cracking reaction was performed on these catalyst samples. The test results revealed that the conversion of feedstock and the gasoline yield obtained over the FCC catalysts with vanadium trapping components were obviously higher than those without addition of vanadium trapping components. The results also showed that the dry gas and coke selectivity on the FCC catalysts containing vanadium trapping components was improved. The X-Ray diffraction results proved that the zeolite crystal structure was well protected by the vanadium trapping components during its hydrothermal deactivation step. The results of SEM-EDX mapping disclosed that the vanadium was enriched on the vanadium trapping components which verified the positive function of vanadium trapping components.展开更多
The thiophene removal ability of the synthesized ZnNi/diatomite-pseudo-boehmite adsorbent was tested in a lab- scale fixed-bed reaction system. X-ray diffractograms （XRD） were used to characterize the adsorbent samp...The thiophene removal ability of the synthesized ZnNi/diatomite-pseudo-boehmite adsorbent was tested in a lab- scale fixed-bed reaction system. X-ray diffractograms （XRD） were used to characterize the adsorbent samples. The effects of Zn/Ni molar ratio, various model fuels and regeneration patterns on the RADS tests were studied. The adsorption mecha- nism was investigated by XRD and MS analyses. The results indicted that thiophene in the model fuel was first decomposed on the surface Ni of the adsorbent to form Ni3S2 while the hydrocarbon portion of the molecule was released back into the process stream, followed by reduction of Ni3S2 to form H2S in the presence of H2, and then HzS is stored in the adsorbent accompanied by the conversion of ZnO into ZnS.展开更多
Three dihydrochalcones derivatives 1-3, flavone 4 and phenanthrene derivative 5 were isolated, together with 9 known compofinds, from the air-dried root bark of Fissistigma bracteolatum Chatterjee. Their structures we...Three dihydrochalcones derivatives 1-3, flavone 4 and phenanthrene derivative 5 were isolated, together with 9 known compofinds, from the air-dried root bark of Fissistigma bracteolatum Chatterjee. Their structures were determined by spectroscopic （NMR, MS） and chemical methodologies.展开更多
Objective.To establish a flow cytometric internal standard method for counting platelet-derived microparti-cles(PMPs)and to study its clinical significance. Methods. PMPs suspension(platelet poor plasma,PPP) was extra...Objective.To establish a flow cytometric internal standard method for counting platelet-derived microparti-cles(PMPs)and to study its clinical significance. Methods. PMPs suspension(platelet poor plasma,PPP) was extracted by gradual centrifugation. According to the size of PMPs,3 μm and 0.8μm latex beads were used as internal standards for the quantitation. PMPs were counted by adjusting flow cytometric discrimination and voltage of forward scatter and side scatter. Results. In 30 healthy donors,the average concentration of resting PMPs was(1.2×105±5.7×104 )/ml and that of activated PMPs was(1.6×106±9.1×105)/ml. Compared with healthy donors,PMPs mean value was significantly higher(P< 0.001)in 18 patients with coronary artery disease,12 with acute cerebral infraction and 23 with chronic renal failure[the average PMPs concentration,( 6.1×105±2.5×105 )/ml, ( 6.8×105±3.4×105)/ml and(5.9×105±3.1×105)/ml respectively]. However,no significant difference in PMPs concentration was observed in 25 patients with acute leukemia and severe thrombocytopenia during the aplastic phase after chemotherapy [1.3×105±6.1×104)/ml,(P >0.05)] .Conclusions. PMPs is a useful indicator in monitoring platelet activation,and plays an important role in thrombotic disease. By flow cytometric internal standard method,PMPs can be counted rapidly and accurately,which may be very helpful in interlaboratory comparative studies.展开更多
Chemical Manganese Dioxide （CMD） was prepared by an alkali-oxidation method. There are several virtues to this environmental friendly and clean process, including the nontoxic and harmless reagents and products, eas...Chemical Manganese Dioxide （CMD） was prepared by an alkali-oxidation method. There are several virtues to this environmental friendly and clean process, including the nontoxic and harmless reagents and products, easy operations, no pollutants, easily obtained raw materials and moderate reaction conditions. The synthesized manganese dioxide was characterized by XRD and SEM. The particles were small, consisting primarily of α-MnO2 and γ-MnO2. Experimental results showed that the optimum conditions were： MnSOa.H20 to NaOH ratio, 1.0：2.4; catalyst concentration （catalyst TF-2）, 6% of the MnSO4; initial solution pH, 11; reaction time and temperature, 20 min and 80 ℃; air flow, 0.20 m3/h; and, agitation rate, 700 r/rain. The conversion of MnSO4 can exceed 80% under these optimum conditions.展开更多
文摘The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.
基金CAS Photon Science Research Center for Carbon DioxideCAS President’s International Fellowship Initiative(2024PVA0097)+1 种基金National Key Research and Development Program of China(2017YFA0403000,2017YFA0402800)National Natural Science Foundation of China(U1932201,U1732121)。
文摘This study demonstrates the design and application of a novel high temperature rotatory apparatus for insitu synchrotron X-ray diffraction studies of molten salts,facilitating investigation into the interaction between various structural materials and molten salts.The apparatus enables accurate detection of every phase change during hightemperature experiments,including strong reaction processes like corrosion.Molten salts,such as chlorides or fluo⁃rides,together with the structure materials,are inserted into either quartz or boron nitride capillaries,where X-ray diffraction pattern can be continuously collected,as the samples are heated to high temperature.The replacement re⁃action,when molten ZnCl2 are etching Ti3AlC2,can be clearly observed through changes in diffraction peak intensity as well as expansion in c-axis lattice parameter of the hexagonal matrix,due to the larger atomic number and ionic ra⁃dius of Zn2+.Furthermore,we investigated the high-temperature corrosion process when GH3535 alloy is in FLiNaK molten salt,and can help to optimize its stability for potential applications in molten salt reactor.Additionally,this high temperature apparatus is fully compatible with the combined usage of X-ray diffraction and Raman technique,providing both bulk and surface structural information.This high temperature apparatus has been open to users and is extensively used at BL14B1 beamline of the Shanghai Synchrotron Radiation Facility.
基金Supported by the National Natural Science Foundation of China(NSFC 62105100)the National Key research and development program in the 14th five year plan(2021YFA1200700)。
文摘Silicon(Si)diffraction microlens arrays are usually used to integrating with infrared focal plane arrays(IRFPAs)to improve their performance.The errors of lithography are unavoidable in the process of the Si diffrac-tion microlens arrays preparation in the conventional engraving method.It has a serious impact on its performance and subsequent applications.In response to the problem of errors of Si diffraction microlens arrays in the conven-tional method,a novel self-alignment method for high precision Si diffraction microlens arrays preparation is pro-posed.The accuracy of the Si diffractive microlens arrays preparation is determined by the accuracy of the first li-thography mask in the novel self-alignment method.In the subsequent etching,the etched area will be protected by the mask layer and the sacrifice layer or the protective layer.The unprotection area is carved to effectively block the non-etching areas,accurately etch the etching area required,and solve the problem of errors.The high precision Si diffraction microlens arrays are obtained by the novel self-alignment method and the diffraction effi-ciency could reach 92.6%.After integrating with IRFPAs,the average blackbody responsity increased by 8.3%,and the average blackbody detectivity increased by 10.3%.It indicates that the Si diffraction microlens arrays can improve the filling factor and reduce crosstalk of IRFPAs through convergence,thereby improving the perfor-mance of the IRFPAs.The results are of great reference significance for improving their performance through opti-mizing the preparation level of micro nano devices.
基金This research was supported by National Natural Science Foundation of China (Grant No. 30070616).
文摘The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth ring at breast height for all sample trees. Significant variation in microfibril angle was observed among growth rings. Mean microfibril angle (MFA) at breast height varied from 7.8?to 28?between growth rings with cambial age and showed a consistent pith-to-bark trend of decline an-gles. Analysis of variance also indicated that there were significant differences in wood basic density, fiber length, fiber width and cellulose content between the growth rings, which had an increasing tendency from pith to bark. Correlations between MFA and examined wood properties were predominantly large and significant negative (?0.01), and the coefficients were -0.660 for cellulose content, -0.586 for fiber length, -0.516 for fiber width and -0.450 for wood basic density, respectively. Regression analysis with linear and curve estimation indicated that a quadratic function showed the largest R2 and the least standard error for describing the relationships between microfibril angle and measured wood properties, and the correlation coefficients were over -0.45 (n=125). The results from this study suggested that microfibril angle would be a good characteristic for improvement in the future breeding program of poplars.
文摘A new capillary gas chromatography stationary phase, monokis (2,6 di O benzyl 3 O propyl (3’)) hexakis(2,6 di O benzyl 3 O methyl) β CD bonded polysiloxane, was synthesized. It exhibited separation abilities to disubstituted benzene isomers and some chiral solutes. It was also found that the polarity of CD derivatives can be lowered both by chemically bonding it to polysiloxane and by diluting it in polysiloxane. The separation abilities of the polysiloxane anchored CDs (SP CD) are higher than that of the unbonded CDs (S CD) and the diluted S CD at lower column temperature. Hydrosilylation reaction is one of the best methods to lower the operating temperature of CDs.
文摘Aim To strdy the separation of native amino acids using capillary zone electro- pboresis (CZE) with indirect ultraviolet detecition. Methods 13 native amino acids were sepa- rated by capillary electrophoresis with indirect detection . The experiments were carried out with homemade CE apparatus under the following operating conditior conditions: a fused-silica capillary col- umn of 50.0cm effect length and of 75m i.d. was used. 7 organic acids were used as BGAE, and a positive potential of separation in CZE with indirect detection. After optimizing for l3 native amino acids were established. Conclusion The choice of BGAe is an important factor influencing the efficiency of separation in CZE with indiect detection .After optimizing the separation conditions a baseline separation for 13 native amino acids is obtained.
文摘Aim To study the chromatographis beheviors of three new cinnamyl cyclodextrin derivative stationary phases. Mehtods Three new cinnamyl β-cyclodextrins, heptakis-(2, 6-di-O-cinnamyl-3-O-methyl)-β-CD, heptakis-(2, 6-di-O-cinnamyl-3-O-acetyl-)-β-CD and heptakis-2, 6-di-O-cirinamyl-3-O-trifluoroacetyl)-β-CD were synthesized and coatal on fused-silica capillary columns . Results The new stationary phases have better thermal stability, good column efficiency and excellent mpaxation power for some sutstituted benzene positional isomers. It was found that the introduction of cinnamyl groups has a significant effect on these stationary phases. Conclusion There new subetituted β-CD compounds are very suitable to be ed as gas chromatographic stationary phases.
文摘Aim To study the chromatographic behaviors of two dipentyl cyclodextrin derivative stationary phases. Methods Two new β-cyclodextrin derivatives, heptakis-[2, 6-di-O-pentyl-3-O-(4-nitrobenzyl)] -β-CD and heptakis-[2, 6-di-O-pentyl-3 -O-(5 -hexenyl)]-β-CD, were synthesized and coatal on fed-silica capillary columns. The chromatographic behaviors of the columns were characterized . Results It was found that the she, polarity, and aromatic property of the substituted group at the 3-position of heptakis-(2, 6 - di - O - pentyl) - β - cyclodextrins greatly influenced their chromatographic properties and separation ability. The introduction of aromatic group or a group containing a double-bond may bring π-π interactions between the host and guest molecules, and therefore increases the separation ability of the β-CDs for substituted benzene isomers. Conclusion The new substituted β-CD compounds are very suitable for being used as gas chromatogaphic stationary phases.
基金the CSIR-CECRI for the financial support (Project No. MLP 0008)
文摘The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, studied were l：l, 1：2, l：4, 1：8, 2：1, 4：1 ＆ 8：1. The galvanic corrosion behaviour of metals was studied in terms of relative increase in the corrosion rate of aluminium due to galvanic coupling with copper, relative decrease in the corrosion rate of copper due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with copper, The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with copper. The weathering parameters and the environmental pollutants which have a major role in influencing the galvanic corrosion of metals were also monitored. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium resulting from galvanic corrosion has been highlighted in terms of pit depth, size and density of pit, using a high resolution microscope.
基金Projects 2003001 supported by the key project of Huainan city, & 2004kj125 by the Science Funding of Department of Education of Anhui Province
文摘By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an mnorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting tempera- tures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.
基金supported in part by Program for New Century Excellent Talents in University of China (No. NCET-10-0133)Innovation Scientists and Technicians Troop Construction Projects of Henan Province (No. 114100510004)
文摘X-ray diffraction （XRD） was used to study the structure of the organic crystallite unit （La, Lo doo2） in coals collected from Henan and Shanxi Provinces. XRD patterns of coal were collected in a step-scan mode （0.1 °/step） over an angular range of 2-90° （20）, allowing 8 s at each step. The structure of the crystallite unit was determined from the Scherrer equation and peak parameters deduced from whole pattern fitting. The results show that the structure of the crystallite unit in coal is mainly controlled by the coal rank. As the coal rank increases the average diameter of a coal crystallite unit （La） increases, the interlayer spacing （doo2） decreases slightly, and the average height of a coal crystallite unit （Lc） increases at first but then decreases. A new diffraction peak from the crystallite unit in coal was found at a low scattering angle in the XRD pattern （2-10~）. This suggests a structure with an inter-layer spacing from 1.9 to 2.8 nm exists in coal crystallites.
基金financially supported by the National Natural Science Foundation of China(No.21276086)the Opening Project of State Key Laboratory of Chemical Engineering of East China University of Science and Technology(No.SKL-ChE-11C04)
文摘The reactive adsorption desulfurization of model gasoline was carried out on Ni/ZnO-HY adsorbent.The Ni/ZnO-HY adsorbent was characterized by N2adsorption-desorption test(BET),X-ray diffractometry(XRD),and temperature-programmed reduction(TPR)analysis.The test results have demonstrated that HY-zeolite is a feasible support for Ni/ZnO components used in reactive adsorption desulfurization.The results of XRD and TPR analyses showed that most of nickel element was present as Ni2+species with only a small part existing as Ni3+species,and the Ni2+species had interactions with HY-zeolite.Under the conditions of this study,which specified a 50% ratio of HY-zeolite in the adsorbent,a Zn/Ni molar ratio of 10,and a reduction temperature of 400℃,the Ni/ZnO-HY adsorbent showed the best desulfurization performance.The sulfur capacity of Ni/ZnO-HY adsorbent could be recovered to 92.19% of the fresh one after being subjected to regeneration at 500℃,and could be maintained at 82.17% of the fresh one after 5 regeneration cycles.
基金Supported by the China National 111 project under Grant No.B07019Important National Science & Technology Specific Projects under Grant No.2008ZX05-056-03
文摘In order to improve the safety properties of an offloading system with side-by-side （SBS） mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. According to the experience of similar projects, tow strategies of different offioading arrangements were discussed by using the 3-D radiation/diffraction theory and quasi-static time domain method to assess their respective safety properties. Through the safety assessment analysis of different arrangement comparisons, various ways to improve the safety properties of off＇loading systems with side-by-side mooring were verified by analyzing the tension in the mooring lines and the fender deflection. Through comparison it can be concluded that by enlarging the key factors properly, including the size of the fenders and the hawsers as well as the number of hawsers, a better safety performance can be achieved.
基金supported by the National Basic Research Development Program "973" Project of China(2010CB732301)the SINOPEC Research and Development Program(No.112034)
文摘The vanadium species were contaminated on FCC catalysts by using the Mitchell method. After the hydrothermal deactivation of the FCC catalysts, the cracking reaction was performed on these catalyst samples. The test results revealed that the conversion of feedstock and the gasoline yield obtained over the FCC catalysts with vanadium trapping components were obviously higher than those without addition of vanadium trapping components. The results also showed that the dry gas and coke selectivity on the FCC catalysts containing vanadium trapping components was improved. The X-Ray diffraction results proved that the zeolite crystal structure was well protected by the vanadium trapping components during its hydrothermal deactivation step. The results of SEM-EDX mapping disclosed that the vanadium was enriched on the vanadium trapping components which verified the positive function of vanadium trapping components.
文摘The thiophene removal ability of the synthesized ZnNi/diatomite-pseudo-boehmite adsorbent was tested in a lab- scale fixed-bed reaction system. X-ray diffractograms （XRD） were used to characterize the adsorbent samples. The effects of Zn/Ni molar ratio, various model fuels and regeneration patterns on the RADS tests were studied. The adsorption mecha- nism was investigated by XRD and MS analyses. The results indicted that thiophene in the model fuel was first decomposed on the surface Ni of the adsorbent to form Ni3S2 while the hydrocarbon portion of the molecule was released back into the process stream, followed by reduction of Ni3S2 to form H2S in the presence of H2, and then HzS is stored in the adsorbent accompanied by the conversion of ZnO into ZnS.
文摘Three dihydrochalcones derivatives 1-3, flavone 4 and phenanthrene derivative 5 were isolated, together with 9 known compofinds, from the air-dried root bark of Fissistigma bracteolatum Chatterjee. Their structures were determined by spectroscopic （NMR, MS） and chemical methodologies.
文摘Objective.To establish a flow cytometric internal standard method for counting platelet-derived microparti-cles(PMPs)and to study its clinical significance. Methods. PMPs suspension(platelet poor plasma,PPP) was extracted by gradual centrifugation. According to the size of PMPs,3 μm and 0.8μm latex beads were used as internal standards for the quantitation. PMPs were counted by adjusting flow cytometric discrimination and voltage of forward scatter and side scatter. Results. In 30 healthy donors,the average concentration of resting PMPs was(1.2×105±5.7×104 )/ml and that of activated PMPs was(1.6×106±9.1×105)/ml. Compared with healthy donors,PMPs mean value was significantly higher(P< 0.001)in 18 patients with coronary artery disease,12 with acute cerebral infraction and 23 with chronic renal failure[the average PMPs concentration,( 6.1×105±2.5×105 )/ml, ( 6.8×105±3.4×105)/ml and(5.9×105±3.1×105)/ml respectively]. However,no significant difference in PMPs concentration was observed in 25 patients with acute leukemia and severe thrombocytopenia during the aplastic phase after chemotherapy [1.3×105±6.1×104)/ml,(P >0.05)] .Conclusions. PMPs is a useful indicator in monitoring platelet activation,and plays an important role in thrombotic disease. By flow cytometric internal standard method,PMPs can be counted rapidly and accurately,which may be very helpful in interlaboratory comparative studies.
基金National Natural Science Foundation of China (No50704036)the Natural Science Foundation of Hunan Province (No08JJ3027) for their financial support
文摘Chemical Manganese Dioxide （CMD） was prepared by an alkali-oxidation method. There are several virtues to this environmental friendly and clean process, including the nontoxic and harmless reagents and products, easy operations, no pollutants, easily obtained raw materials and moderate reaction conditions. The synthesized manganese dioxide was characterized by XRD and SEM. The particles were small, consisting primarily of α-MnO2 and γ-MnO2. Experimental results showed that the optimum conditions were： MnSOa.H20 to NaOH ratio, 1.0：2.4; catalyst concentration （catalyst TF-2）, 6% of the MnSO4; initial solution pH, 11; reaction time and temperature, 20 min and 80 ℃; air flow, 0.20 m3/h; and, agitation rate, 700 r/rain. The conversion of MnSO4 can exceed 80% under these optimum conditions.
