LiNiCoAlO（NCA） with Zr（OH）coating is demonstrated as high performance cathode material for lithium ion batteries（LIBs）. The coated materials are synthesized via a simple dry coating method of NCA with Zr（OH）po...LiNiCoAlO（NCA） with Zr（OH）coating is demonstrated as high performance cathode material for lithium ion batteries（LIBs）. The coated materials are synthesized via a simple dry coating method of NCA with Zr（OH）powders, and then characterized with scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and X-ray photoelectron spectroscopy（XPS）. Experimental results show that amorphous Zr（OH）powders have been successfully coated on the surface of spherical NCA particles, exhibiting improved electrochemical performance. 0.50 wt% Zr（OH）coated NCA delivers a capacity of 197.6 mAh/g at the first cycle and 154.3 mAh/g after 100 cycles with a capacity retention of 78.1% at 1 C rate. In comparison, the pure NCA shows a capacity of 194.6 mAh/g at the first cycle and 142.5 mAh/g after 100 cycles with a capacity retention of 73.2% at 1 C rate. Electrochemical impedance spectroscopy（EIS） results show that the coated material exhibits a lower resistance, indicating that the coating layer can efficiently suppress transition metals dissolution and decrease the side reactions at the surface between the electrode and electrolyte. Therefore, surface coating with amorphous Zr（OH）is a simple and useful method to enhance the electrochemical performance of NCA-based materials for the cathode of LIBs.展开更多
High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The w...High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The whiskers were characterized by X-ray diffraction, transmission electron microscope, and Brunauer-Emmett-Teller N_2 surface area measurement. The influence of buffer solution concentration on the characteristics of the sample was investigated. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. Overall, LDH-NO_3-CO_3 whiskers with well-defined geometry, distinct intercalated structure, high quality, and good dispersion capability can be obtained under the following conditions: buffer solution volumetric ratio of 60%, reaction temperature of 55°C, and reaction time of 269 h.展开更多
Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6A...Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.展开更多
基金supported by the National Projects of NSFC(21322101 and 21231005)MOE(B12015 and IRT13R30)
文摘LiNiCoAlO（NCA） with Zr（OH）coating is demonstrated as high performance cathode material for lithium ion batteries（LIBs）. The coated materials are synthesized via a simple dry coating method of NCA with Zr（OH）powders, and then characterized with scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and X-ray photoelectron spectroscopy（XPS）. Experimental results show that amorphous Zr（OH）powders have been successfully coated on the surface of spherical NCA particles, exhibiting improved electrochemical performance. 0.50 wt% Zr（OH）coated NCA delivers a capacity of 197.6 mAh/g at the first cycle and 154.3 mAh/g after 100 cycles with a capacity retention of 78.1% at 1 C rate. In comparison, the pure NCA shows a capacity of 194.6 mAh/g at the first cycle and 142.5 mAh/g after 100 cycles with a capacity retention of 73.2% at 1 C rate. Electrochemical impedance spectroscopy（EIS） results show that the coated material exhibits a lower resistance, indicating that the coating layer can efficiently suppress transition metals dissolution and decrease the side reactions at the surface between the electrode and electrolyte. Therefore, surface coating with amorphous Zr（OH）is a simple and useful method to enhance the electrochemical performance of NCA-based materials for the cathode of LIBs.
文摘High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The whiskers were characterized by X-ray diffraction, transmission electron microscope, and Brunauer-Emmett-Teller N_2 surface area measurement. The influence of buffer solution concentration on the characteristics of the sample was investigated. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. Overall, LDH-NO_3-CO_3 whiskers with well-defined geometry, distinct intercalated structure, high quality, and good dispersion capability can be obtained under the following conditions: buffer solution volumetric ratio of 60%, reaction temperature of 55°C, and reaction time of 269 h.
文摘Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.
