The characteristics of hosted magmas and their petrogenesis based on electron microprobe determination of trace element contents in zircons were discussed. Trace element geochemistry of zircons indicates that zircons ...The characteristics of hosted magmas and their petrogenesis based on electron microprobe determination of trace element contents in zircons were discussed. Trace element geochemistry of zircons indicates that zircons in both gabbro and quartz syenite have two-generations. Zircons of the first generations are crystallized in the magma chamber, whereas those of the second generations are formed in supercooling environment. The former is richer in Zr, but poorer in U, Th, Hf and Y. Quartz diorite porphyrite contains zircons that can be distinguished into the early and late generations. Compared to the late generation, the early generation is richer in Zr but poorer in U, Th, Hf and Y. No conspicuous disruption of zircon evolution has been found in both biotite monzogranite and fine-grained granite. However, the content of zircon in fine-grained granite is higher in U, Th and Y and lower in Zr relative to biotite monzogranite without significant contrast in mass fraction ratio of ZrO2 to HfO2 ratio. Such differences in zircon geochemistry of various intrusive phases and the occurrence of the two zircon generations within a single intrusive phase suggest that these phases of magmas are generated from diverse sources during post-collisional continental extension. These magmas ascend rapidly and cool quickly in a short interval.展开更多
The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.T...The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.展开更多
Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were withi...Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were within the allowed standard of China’s safe water guideline. The hazard quotients （HQ） and the hazard index （HI） value levels of all the five heavy metals in all sampling sites did not exceed the acceptable risk limits of non-carcinogenic value through the selected assessment method. Pearson’s correlation analysis and principal component analysis （PCA） indicated that Zn and Cu mainly originated from the natural alluviation and non-point agricultural sources, whereas Cr and As were mainly derived from industrial effluents. Moreover, Cd mainly originated from both non-point agricultural and industrial pollution sources. In addition, cluster analysis （CA） implied that cluster 1 （including S3, S5, S6 and S10） was considered the set of high pollution sites and cluster 2 （including S4 and S9） was identified as the set of moderate pollution sites.展开更多
In the present work, scandium elements with a series of contents(0.06 wt.%, 0.10 wt.%, 0.14 wt.%,0.17 wt.%, 0.20 wt.% and 0.25 wt.%) were added in a high Zn-containing Al-Zn-Mg-Cu-Zr alloy and the corresponding as-cas...In the present work, scandium elements with a series of contents(0.06 wt.%, 0.10 wt.%, 0.14 wt.%,0.17 wt.%, 0.20 wt.% and 0.25 wt.%) were added in a high Zn-containing Al-Zn-Mg-Cu-Zr alloy and the corresponding as-cast microstructure characteristics including grains and phases were thoroughly investigated. The results indicated that fine grain boundaries existed in these alloys and fine MgZn2phases discontinuously distributed on them. Besides,AlZnMgCu eutectic phases and Sc, Zr-containing phases with flocculent morphology were observed. As scandium contents vary from 0.06 wt.% to 0.17 wt.%, the average grain size continuously decreased and its equiaxial characteristics were strengthened. Meanwhile, the content of AlZnMgCu eutectic phase showed a decrease trend. When scandium contents were 0.20 wt.% and 0.25 wt.%, no further enhancement on grain refinement was observed, so as to the reduction of AlZnMgCu eutectic phase content. Besides, Sc, Zr-containing phases with blocky morphology were observed and the alloy with a scandium content of 0.25 wt.% possessed a larger amount of blocky Sc, Zr-containing phase than the alloy with a scandium content of 0.20 wt.%. Grain refinement and reduction of AlZnMgCu eutectic phase content associated with scandium addition were discussed.展开更多
Tribological characteristics and self-repairing effect of hydroxy-magnesium silicate (HMS) dispersed in lubricant oil on steel-to-steel friction pairs with various surface roughness were analyzed.The friction-reductio...Tribological characteristics and self-repairing effect of hydroxy-magnesium silicate (HMS) dispersed in lubricant oil on steel-to-steel friction pairs with various surface roughness were analyzed.The friction-reduction,anti-wear and self-repairing performance of various surface roughness friction pairs were examined by friction testing machine.An operation comparison was made between SJ10W-40 lubricant with and without HMS.The surface morphology and elementary composition of the grinding cracks were analyzed by scanning electron microscope (SEM) and energy dispersive spectrometer (EDS).The results show that the lubrication state changes from boundary lubrication into mixed lubrication after operation in lubricant with HMS.The friction-reduction,anti-wear and self-repairing performance of the friction pairs with various surface roughness are distinctly different.There is a repairing film whose material is different from substrate material on the grinding cracks.In addition,Si,Mg,O,Al and other elements are deposited on the repairing film which contains nanocrystals of these elements.And HMS self-repairing material possesses superior performance of friction-reduction,anti-wear and self-repairing effects.展开更多
文摘The characteristics of hosted magmas and their petrogenesis based on electron microprobe determination of trace element contents in zircons were discussed. Trace element geochemistry of zircons indicates that zircons in both gabbro and quartz syenite have two-generations. Zircons of the first generations are crystallized in the magma chamber, whereas those of the second generations are formed in supercooling environment. The former is richer in Zr, but poorer in U, Th, Hf and Y. Quartz diorite porphyrite contains zircons that can be distinguished into the early and late generations. Compared to the late generation, the early generation is richer in Zr but poorer in U, Th, Hf and Y. No conspicuous disruption of zircon evolution has been found in both biotite monzogranite and fine-grained granite. However, the content of zircon in fine-grained granite is higher in U, Th and Y and lower in Zr relative to biotite monzogranite without significant contrast in mass fraction ratio of ZrO2 to HfO2 ratio. Such differences in zircon geochemistry of various intrusive phases and the occurrence of the two zircon generations within a single intrusive phase suggest that these phases of magmas are generated from diverse sources during post-collisional continental extension. These magmas ascend rapidly and cool quickly in a short interval.
基金Proejcr(20235020) supported by the National Natural Science Foundation of China
文摘The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.
基金Projects(51578222,51178172) supported by the National Natural Science Foundation of ChinaProjects(17Z017,17G025) supported by the Humanities and Social Science Project of Hubei Provincial Education Department,China+1 种基金Project(1718WT15) supported by the Hubei College Student Affairs Research Institute,ChinaProjects(2016J1410,2016J1411) supported by the Graduate Innovative Education Program of Zhongnan University of Economics and Law,China
文摘Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were within the allowed standard of China’s safe water guideline. The hazard quotients （HQ） and the hazard index （HI） value levels of all the five heavy metals in all sampling sites did not exceed the acceptable risk limits of non-carcinogenic value through the selected assessment method. Pearson’s correlation analysis and principal component analysis （PCA） indicated that Zn and Cu mainly originated from the natural alluviation and non-point agricultural sources, whereas Cr and As were mainly derived from industrial effluents. Moreover, Cd mainly originated from both non-point agricultural and industrial pollution sources. In addition, cluster analysis （CA） implied that cluster 1 （including S3, S5, S6 and S10） was considered the set of high pollution sites and cluster 2 （including S4 and S9） was identified as the set of moderate pollution sites.
基金Projects(2020YFB0311400ZL, 2020YFF0218202) supported by the National Key R&D Program of ChinaProject supported by Youth Fund Project of GRINM Group Co.,Ltd.,China。
文摘In the present work, scandium elements with a series of contents(0.06 wt.%, 0.10 wt.%, 0.14 wt.%,0.17 wt.%, 0.20 wt.% and 0.25 wt.%) were added in a high Zn-containing Al-Zn-Mg-Cu-Zr alloy and the corresponding as-cast microstructure characteristics including grains and phases were thoroughly investigated. The results indicated that fine grain boundaries existed in these alloys and fine MgZn2phases discontinuously distributed on them. Besides,AlZnMgCu eutectic phases and Sc, Zr-containing phases with flocculent morphology were observed. As scandium contents vary from 0.06 wt.% to 0.17 wt.%, the average grain size continuously decreased and its equiaxial characteristics were strengthened. Meanwhile, the content of AlZnMgCu eutectic phase showed a decrease trend. When scandium contents were 0.20 wt.% and 0.25 wt.%, no further enhancement on grain refinement was observed, so as to the reduction of AlZnMgCu eutectic phase content. Besides, Sc, Zr-containing phases with blocky morphology were observed and the alloy with a scandium content of 0.25 wt.% possessed a larger amount of blocky Sc, Zr-containing phase than the alloy with a scandium content of 0.20 wt.%. Grain refinement and reduction of AlZnMgCu eutectic phase content associated with scandium addition were discussed.
基金Projects(50735006,50904072) supported by the National Natural Science Foundation of ChinaProject(2007CB607601) supported by the National Basic Research Program of China
文摘Tribological characteristics and self-repairing effect of hydroxy-magnesium silicate (HMS) dispersed in lubricant oil on steel-to-steel friction pairs with various surface roughness were analyzed.The friction-reduction,anti-wear and self-repairing performance of various surface roughness friction pairs were examined by friction testing machine.An operation comparison was made between SJ10W-40 lubricant with and without HMS.The surface morphology and elementary composition of the grinding cracks were analyzed by scanning electron microscope (SEM) and energy dispersive spectrometer (EDS).The results show that the lubrication state changes from boundary lubrication into mixed lubrication after operation in lubricant with HMS.The friction-reduction,anti-wear and self-repairing performance of the friction pairs with various surface roughness are distinctly different.There is a repairing film whose material is different from substrate material on the grinding cracks.In addition,Si,Mg,O,Al and other elements are deposited on the repairing film which contains nanocrystals of these elements.And HMS self-repairing material possesses superior performance of friction-reduction,anti-wear and self-repairing effects.
