Isothermal and cyclic oxidation behaviours of pure and yttrium-implanted nickel were studied at 1000℃ in air. Scanning electronic microscopy （SEM） and transmission electronic microscopy （TEM） were used to examine...Isothermal and cyclic oxidation behaviours of pure and yttrium-implanted nickel were studied at 1000℃ in air. Scanning electronic microscopy （SEM） and transmission electronic microscopy （TEM） were used to examine the micro-morphology and structure of oxide scales formed on the nickel substrate. It was found that Y-implantation significantly improved the anti- oxidation ability of nickel in both isothermal and cyclic oxidizing experiments. Laser Raman microscopy was also used to study the stress status of oxide scales formed on nickel with and without yttrium. The main reason for the improvement in anti-oxidation of nickel was that Y- implantation greatly reduced the growing speed and grain size of NiO. This fine-grained NiO oxide film might have better high temperature plasticity and could relieve parts of compressive stress by means of creeping, and maintained a ridge character and a relatively low internal stress level. Hence yttrium ion-implantation remarkably enhanced the adhesion of protective NiO oxide scale formed on the nickel substrate.展开更多
Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investig...Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.展开更多
The nanometer yttrium oxides were obtained through precipitation in aqueous solution by reaction with ammonium bicarbonate. The reaction between yttrium chloride and ammonium bicarbonate, the effect of surfactants on ...The nanometer yttrium oxides were obtained through precipitation in aqueous solution by reaction with ammonium bicarbonate. The reaction between yttrium chloride and ammonium bicarbonate, the effect of surfactants on particle size and the methods of controlling agglomeration were studied. Compared to other methods, the method of controlling the agglomeration by adding surfactant is one of the best methods for controlling the agglomeration of nanometer particles in wet-chemical process. Increasing surfactants in process of precipitation deduced particle size, obtained narrow size distribution of primary particles. As for the concentration range studied, excess surfactants increased the particle size on the contrary. Characteristics of the thermal decomposition of yttrium carbonate were studied. It indicated that the approximate chemical composition of the precipitate was Y（OH）Clx（CO3） （1-x/2） ·3H2O,the cubic Y2O3 was obtained above 600℃, the specific surface and the remain chloride of nanometer Y2O3 was decreased with calcinating temperature rising. The spherical nanometer yttrium oxide was gained with primary particles<50 nm,agglomerate distribution D 50 <150 nm, BET>35 m2/g,agglomerate constant （D 50 /D BET ）<6.展开更多
Microstructure and oxidation behavior of modified Ni-16Mo-7Cr-4Fe alloys by yttrium microalloying were investigated by scanning electron microscopy, transmission electron microscopy, grazing incident Xray diffraction ...Microstructure and oxidation behavior of modified Ni-16Mo-7Cr-4Fe alloys by yttrium microalloying were investigated by scanning electron microscopy, transmission electron microscopy, grazing incident Xray diffraction and synchrotron radiation X-ray fluorescence. M6 C and Ni17Y2 phases were observed and the amount of Ni17Y2 increased with yttrium concentration. When the yttrium concentration increased to 0.43 wt.%,some Ni17Y2 chains and multi phase regions containing Ni17Y2, M6 C and γ phase appeared, which is harmful for the oxidation resistance. The alloy containing 0.05 wt.% yttrium showed the best oxidation resistance, which derives its oxidation resistance from the adequate concentration of yttrium in the solid-solution(γ phase), the formation of the protective layer of YCr O3 and chromia oxide and the strengthening effect of yttrium on oxide boundaries.展开更多
基金National Natural Science Foundation of China(No.29231011)National Natural Science Foundation of Colombia(No.M018327)
文摘Isothermal and cyclic oxidation behaviours of pure and yttrium-implanted nickel were studied at 1000℃ in air. Scanning electronic microscopy （SEM） and transmission electronic microscopy （TEM） were used to examine the micro-morphology and structure of oxide scales formed on the nickel substrate. It was found that Y-implantation significantly improved the anti- oxidation ability of nickel in both isothermal and cyclic oxidizing experiments. Laser Raman microscopy was also used to study the stress status of oxide scales formed on nickel with and without yttrium. The main reason for the improvement in anti-oxidation of nickel was that Y- implantation greatly reduced the growing speed and grain size of NiO. This fine-grained NiO oxide film might have better high temperature plasticity and could relieve parts of compressive stress by means of creeping, and maintained a ridge character and a relatively low internal stress level. Hence yttrium ion-implantation remarkably enhanced the adhesion of protective NiO oxide scale formed on the nickel substrate.
基金supported by the National Natural Science Foundation of China (Grant No. 60578041)the Shanghai Leading Academic Disciplines (Grant No. S30107)
文摘Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.
基金Project supported by key project of science and technology research of guangdong province(2002A1070108)
文摘The nanometer yttrium oxides were obtained through precipitation in aqueous solution by reaction with ammonium bicarbonate. The reaction between yttrium chloride and ammonium bicarbonate, the effect of surfactants on particle size and the methods of controlling agglomeration were studied. Compared to other methods, the method of controlling the agglomeration by adding surfactant is one of the best methods for controlling the agglomeration of nanometer particles in wet-chemical process. Increasing surfactants in process of precipitation deduced particle size, obtained narrow size distribution of primary particles. As for the concentration range studied, excess surfactants increased the particle size on the contrary. Characteristics of the thermal decomposition of yttrium carbonate were studied. It indicated that the approximate chemical composition of the precipitate was Y（OH）Clx（CO3） （1-x/2） ·3H2O,the cubic Y2O3 was obtained above 600℃, the specific surface and the remain chloride of nanometer Y2O3 was decreased with calcinating temperature rising. The spherical nanometer yttrium oxide was gained with primary particles<50 nm,agglomerate distribution D 50 <150 nm, BET>35 m2/g,agglomerate constant （D 50 /D BET ）<6.
基金Supported by the program of International S&T Cooperation(No.2014D FG60230)the National Natural Science Foundation of China(Nos.51371189 and 51371188)+1 种基金Science and Technology Commis sion of Shanghai Municipality(No.11JC1414900)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘Microstructure and oxidation behavior of modified Ni-16Mo-7Cr-4Fe alloys by yttrium microalloying were investigated by scanning electron microscopy, transmission electron microscopy, grazing incident Xray diffraction and synchrotron radiation X-ray fluorescence. M6 C and Ni17Y2 phases were observed and the amount of Ni17Y2 increased with yttrium concentration. When the yttrium concentration increased to 0.43 wt.%,some Ni17Y2 chains and multi phase regions containing Ni17Y2, M6 C and γ phase appeared, which is harmful for the oxidation resistance. The alloy containing 0.05 wt.% yttrium showed the best oxidation resistance, which derives its oxidation resistance from the adequate concentration of yttrium in the solid-solution(γ phase), the formation of the protective layer of YCr O3 and chromia oxide and the strengthening effect of yttrium on oxide boundaries.
