Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue therm...Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.展开更多
Here,this work presents an air-stable ultrabright inverted organic lightemitting device(OLED)by using zinc ionchelated polyethylenimine(PEI)as electron injection layer.The zinc chelation is demonstrated to increase th...Here,this work presents an air-stable ultrabright inverted organic lightemitting device(OLED)by using zinc ionchelated polyethylenimine(PEI)as electron injection layer.The zinc chelation is demonstrated to increase the conductivity of the PEI by three orders of magnitude and passivate the polar amine groups.With these physicochemical properties,the inverted OLED shows a record-high external quantum efficiency of 10.0% at a high brightness of 45,610 cd m^(-2) and can deliver a maximum brightness of 121,865 cd m^(-2).Besides,the inverted OLED is also demonstrated to possess an excellent air stability(humidity,35%)with a half-brightness operating time of 541 h@1000 cd m^(-2) without any protection nor encapsulation.展开更多
The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （A...The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （Alq3） （both emission and electron transport layers） is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm2, which is about 86% higher than that of an ordinary device （without a LiF interlayer, 3.2 cd/A）. An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.展开更多
A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trappi...A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trapping, heterojunction interface and recombination process. The device structure in the simulation is ITO/CuPc （20 nm）/NPD （40 nm）/Alq3 （60 nm）/LiF/Al. There are two heterojunctions which should be dealt with in the simulation. The I-V characteristics, carrier distribution and recombination rate of a device are calculated. The simulation results and measured data are in good agreement.展开更多
This paper reports that the doped bi-layer organic light-emitting devices are fabricated by doping in different regions of the light-emitting layer, the admittance and luminance spectra to characterize the capacitance...This paper reports that the doped bi-layer organic light-emitting devices are fabricated by doping in different regions of the light-emitting layer, the admittance and luminance spectra to characterize the capacitance and luminance of the device are measured. Negative capacitance （NC） appeared at low frequencies when the doped devices are biased with high voltages. The measured phase difference between AC voltage applied across the device and AC current flowing through the device show that the device is inductive when NC appears.展开更多
High performance organic light-emitting devices （OLEDs） have been investigated by using fluorescent bis （2-methyl-8-quinolinolato）（para-phenylphenolato）aluminum（BAlq） as an emissive layer on the performance of...High performance organic light-emitting devices （OLEDs） have been investigated by using fluorescent bis （2-methyl-8-quinolinolato）（para-phenylphenolato）aluminum（BAlq） as an emissive layer on the performance of multicolor devices consisting of N, N＇-bis-（1-naphthyl）-N,N＇diphenyl- 1,1＇-biphenyl-4,4＇- diamine （NPB） as hole transport layer. The results show that the performance of heterostructure blue light-emitting device composed of 8-hydroxyquinoline aluminum （Alq3） as an electron transport layer has been dramatically enhanced. In the case of high performance heterostructure devices, the electroluminescent spectra has been perceived to vary strongly with the thickness of the organic layers due to the different recombination region, which indicates that various color devices composed of identical components could be implemented by changing the film thickness of different functional layers.展开更多
In this paper we report on a high-contrast top-emitting organic light-emitting device utilizing a moderate-reflection contrast-enhancement stack and a high refractive index anti-reflection layer.The contrast-enhanceme...In this paper we report on a high-contrast top-emitting organic light-emitting device utilizing a moderate-reflection contrast-enhancement stack and a high refractive index anti-reflection layer.The contrast-enhancement stack consists of a thin metal anode layer,a dielectric bilayer,and a thick metal underlayer.The resulting device,with the optimized contrast-enhancement stack thicknesses of Ni（30 nm）/MgF 2（62 nm）/ZnS（16 nm）/Ni（20 nm） and the 25-nm-thick ZnS anti-reflection layer,achieves a luminous reflectance of 4.01% in the visible region and a maximum current efficiency of 0.99 cd/A（at 62.3 mA/cm 2） together with a very stable chromaticity.The contrast ratio reaches 561：1 at an on-state brightness of 1000 cd/m^2 under an ambient illumination of 140 lx.In addition,the anti-reflection layer can also enhance the transmissivity of the cathode and improve light out-coupling by the effective restraint of microcavity effects.展开更多
We investigate the electron injection effect of inserting a thin aluminum（Al） layer into cesium carbonate（Cs2CO3）injection layer. Two groups of organic light-emitting devices（OLEDs） are fabricated. For the first...We investigate the electron injection effect of inserting a thin aluminum（Al） layer into cesium carbonate（Cs2CO3）injection layer. Two groups of organic light-emitting devices（OLEDs） are fabricated. For the first group of devices based on Alq3, we insert a thin Al layer of different thickness into Cs2CO3 injection layer, and the device＇s maximum current efficiency of 6.5 cd/A is obtained when the thickness of the thin Al layer is 0.4 nm. However, when the thickness of Al layer is 0.8 nm, the capacity of electron injection is the strongest. To validate the universality of this approach, then we fabricate another group of devices based on another blue emitting material. The maximum current efficiency of the device without and with a thin Al layer is 4.51 cd/A and 4.84 cd/A, respectively. Inserting a thin Al layer of an appropriate thickness into Cs2CO3 layer can result in the reduction of electron injection barrier, enhancement of the electron injection, and improvement of the performance of OLEDs. This can be attributed to the mechanism that thermally evaporated Cs2CO3 decomposes into cesium oxides, the thin Al layer reacts with cesium oxides to form Al–O–Cs complex, and the amount of the Al–O–Cs complex can be controlled by adjusting the thickness of the thin Al layer.展开更多
We chose pentacene as a hole injection layer（HIL） to fabricate the high performance blue fluorescent organic lightemitting devices（OLEDs）. We found that the carrier mobility of the pentacene thin films could be ef...We chose pentacene as a hole injection layer（HIL） to fabricate the high performance blue fluorescent organic lightemitting devices（OLEDs）. We found that the carrier mobility of the pentacene thin films could be efficiently improved after a critical annealing at temperature 120℃. Then we performed the tests of scanning electron microscopy, atomic force microscopy, and Kelvin probe to explore the effect of annealing on the pentacene films. The pentacene film exhibited a more crystalline form with better continuities and smoothness after annealing. The optimal device with 120℃ annealed pentacene film and n-doped electron transport layer（ETL） presents a low turn-on voltage of 2.6 V and a highest luminance of 134800 cd/m^2 at 12 V, which are reduced by 26% and improved by 50% compared with those of the control device.展开更多
In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)...In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.展开更多
A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,0...A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.展开更多
We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.T...We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.展开更多
We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent devi...We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.展开更多
White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The...White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The optical properties of Cz6F, PVK, and PVK：Cz6F blends are studied. Single and double layer devices are fabri- cated by using PVK： Cz6F blends, and the device with the configuration of indium tin oxide （ITO）/PVK：Cz6F/ tris（8-hydroxyquinolinate）aluminium （Alq3）/LiF/A1 exhibits white light emission with Commission Internationale de l＇Eclairage chromaticity coordinates of （0.30, 0.33） and a brightness of 402 cd/m^2. The investigation reveals that the white light is composed of a blue-green emission originating from the excimer of Cz6F molecules and a red emission from an electroplex from the PVK：Cz6F blend films.展开更多
The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has be...The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has been demonstrated to achieve a high efficiency, high color rendering index(CRI), and low voltage trade-off.The device exhibits a maximum total efficiency of 41.5 lm W^(-1), the highest among hybrid WOLEDs with n-type ILs. In addition, high CRIs(80–88) at practical luminances(C1000 cd m^(-2)) have been obtained, satisfying the demand for indoor lighting. Remarkably, a CRI of 88 is the highest among hybrid WOLEDs. Moreover, the device exhibits low voltages, with a turn-on voltage of only 2.5 V([1 cd m^(-2)), which is the lowest among hybrid WOLEDs. The intrinsic working mechanism of the device has also been explored; in particular, the role of n-type ILs in regulating the distribution of charges and excitons has been unveiled. The findings demonstrate that the introduction of n-type ILs is effective in developing high-performance hybrid WOLEDs.展开更多
Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED conta...Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.展开更多
Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tand...Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.展开更多
A high-efficiency green phosphorescent organic light emitting diode with a simplified structure is achieved that is free of a hole transport layer. The design of this kind of device structure not only saves the consum...A high-efficiency green phosphorescent organic light emitting diode with a simplified structure is achieved that is free of a hole transport layer. The design of this kind of device structure not only saves the consumption of organic materials but also greatly reduces the structural heterogeneities and effectively facilitates the charge injection into the emissive layer. The resulting green phosphorescent organic light-emitting diodes （PHOLEDs） exhibit higher electroluminescent efficiency. The maximum external quantum efficiency and current efficiency reach 23.7% and 88 cd/A, respectively. Moreover the device demonstrates satisfactory stability, keeping 23.7% and 88cd/A, 22% and 82cd/A, respectively, at a luminance of 100 and 1000cd/m2. The working mechanism for achieving high efficiency based on such a simple device structure is discussed correspondingly. The improved charge carrier injection and transport balance are proved to prominently contribute to achieve the high efficiency and great stability at high luminance in the green PHOLEDs.展开更多
A new interlayer is successfully used to be a universal carrier switch, developing high-performance hybrid white organic light-emitting diodes （WOLEDs）. By dint of this interlayer, the two-color hybrid WOLED shows a...A new interlayer is successfully used to be a universal carrier switch, developing high-performance hybrid white organic light-emitting diodes （WOLEDs）. By dint of this interlayer, the two-color hybrid WOLED shows a maximum total current efficiency （CE） and power efficiency （PE） of 48.1 cd/A and 37.6 Im/W, respectively, while the three-color hybrid WOLED shows a maximum total CE and PE of 33.8 cd/A and 25.7Im/W, respectively. The color rendering index of the three-color hybrid WOLEDs are ≥ 75, which is already a sufficient level for many commercial lighting applications. In addition, both the two-color and three-color hybrid WOLEDs show low efficiency roll-off and stable color. Furthermore, devices with the new interlayer show much higher performance than devices with the most commonly used 4,4-N,N-dicarbazolebiphenyl and N,N＇-di（naphthalene-l-yl）-N,N＇- diphenyl-benzidine interlayers.展开更多
We report on white organic light-emitting diodes （WOLEDs） based on polyvinylcarbazole （PVK） doped with 1,1-bis（（di-4-tolylamino）phenyl）cyclohexane （TAPC） and perylene, and investigate the luminescence mechan...We report on white organic light-emitting diodes （WOLEDs） based on polyvinylcarbazole （PVK） doped with 1,1-bis（（di-4-tolylamino）phenyl）cyclohexane （TAPC） and perylene, and investigate the luminescence mechanism of the devices. The chromaticity of light emission can be tuned by adjusting the concentration of the dopants. White light with the Commission Internationale de L＇Eclairage （CIE） coordinates of （0.33, 0.34） is achieved by mixing the yellow electromer emission of TAPC and the blue monomer emission of perylene from the device ITO/PVK： TAPC： perylene （100：9：1 in wt.） （100 nm）/tris-（8-hydroxyquinoline aluminum （Alq3） （10 nm）/A1. The device exhibits a maximal luminance of 3727 cd/m2 and a current efficiency of 2 cd/A.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61675041 and 61605253)the Foundation for Innovation Research Groups of the National Natural Science Foundation of China(Grant No.61421002)the Science&Technology Department Program of Sichuan Province,China(Grant No.2016HH0027)
文摘Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.
基金supported by the National Natural Science Foundation of China(Grant Nos.61905086,62174067,62175085)Science and Technology Development Planning of Jilin Province(Project Nos.20190101024JH,20200201296JC)+1 种基金the Hong Kong Scholars Program(Project No.XJ2020028)grants from the Research Grants Council of the Hong Kong Special Administrative Region,China(Project Nos.11300418 and 11300419).
文摘Here,this work presents an air-stable ultrabright inverted organic lightemitting device(OLED)by using zinc ionchelated polyethylenimine(PEI)as electron injection layer.The zinc chelation is demonstrated to increase the conductivity of the PEI by three orders of magnitude and passivate the polar amine groups.With these physicochemical properties,the inverted OLED shows a record-high external quantum efficiency of 10.0% at a high brightness of 45,610 cd m^(-2) and can deliver a maximum brightness of 121,865 cd m^(-2).Besides,the inverted OLED is also demonstrated to possess an excellent air stability(humidity,35%)with a half-brightness operating time of 541 h@1000 cd m^(-2) without any protection nor encapsulation.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60906022 and 60876046)the Tianjin Natural Science Foundation of China (Grant No. 10JCYBJC01100)
文摘The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （Alq3） （both emission and electron transport layers） is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm2, which is about 86% higher than that of an ordinary device （without a LiF interlayer, 3.2 cd/A）. An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.
基金Project supported by Zhejiang Yangguang Cooperation Foundation, China (Grant No W050317)
文摘A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trapping, heterojunction interface and recombination process. The device structure in the simulation is ITO/CuPc （20 nm）/NPD （40 nm）/Alq3 （60 nm）/LiF/Al. There are two heterojunctions which should be dealt with in the simulation. The I-V characteristics, carrier distribution and recombination rate of a device are calculated. The simulation results and measured data are in good agreement.
基金supported by the Natural Science Foundation of the Shanghai Committee of Science and Technology,China (GrantNo. 08JC1402300)
文摘This paper reports that the doped bi-layer organic light-emitting devices are fabricated by doping in different regions of the light-emitting layer, the admittance and luminance spectra to characterize the capacitance and luminance of the device are measured. Negative capacitance （NC） appeared at low frequencies when the doped devices are biased with high voltages. The measured phase difference between AC voltage applied across the device and AC current flowing through the device show that the device is inductive when NC appears.
基金This was work supported in part by the National Nature Science Foundation oChina under Grant No. 60425101.
文摘High performance organic light-emitting devices （OLEDs） have been investigated by using fluorescent bis （2-methyl-8-quinolinolato）（para-phenylphenolato）aluminum（BAlq） as an emissive layer on the performance of multicolor devices consisting of N, N＇-bis-（1-naphthyl）-N,N＇diphenyl- 1,1＇-biphenyl-4,4＇- diamine （NPB） as hole transport layer. The results show that the performance of heterostructure blue light-emitting device composed of 8-hydroxyquinoline aluminum （Alq3） as an electron transport layer has been dramatically enhanced. In the case of high performance heterostructure devices, the electroluminescent spectra has been perceived to vary strongly with the thickness of the organic layers due to the different recombination region, which indicates that various color devices composed of identical components could be implemented by changing the film thickness of different functional layers.
基金Project supported by the State Key Development Program for Basic Research of China (Grant No. 2009CB930600)the National Natural Science Foundation of China (Grant Nos. 60907047,61274065,60977024,21101095,20974046,21003076,51173081,and 61136003)+3 种基金the Specialized Research Foundation for the Doctoral Program of Higher Education,China (Grant No. 20093223120003)the Natural Science Foundation of Institutions of Higher Education of Jiangsu Province,China (Grant Nos. SJ209003,09KJB150009,10KJB510013,and TJ209035)the "Qing Lan" Program of Jiangsu Province,Chinathe Program of Nanjing University of Posts and Telecommunications,China (Grant Nos. NY210015,NY211069,and NY210040)
文摘In this paper we report on a high-contrast top-emitting organic light-emitting device utilizing a moderate-reflection contrast-enhancement stack and a high refractive index anti-reflection layer.The contrast-enhancement stack consists of a thin metal anode layer,a dielectric bilayer,and a thick metal underlayer.The resulting device,with the optimized contrast-enhancement stack thicknesses of Ni（30 nm）/MgF 2（62 nm）/ZnS（16 nm）/Ni（20 nm） and the 25-nm-thick ZnS anti-reflection layer,achieves a luminous reflectance of 4.01% in the visible region and a maximum current efficiency of 0.99 cd/A（at 62.3 mA/cm 2） together with a very stable chromaticity.The contrast ratio reaches 561：1 at an on-state brightness of 1000 cd/m^2 under an ambient illumination of 140 lx.In addition,the anti-reflection layer can also enhance the transmissivity of the cathode and improve light out-coupling by the effective restraint of microcavity effects.
基金supported by the National Natural Science Foundation of China(Grant No.60906022)the Natural Science Foundation of Tianjin,China(Grant No.10JCYBJC01100)+2 种基金the Scientific Developing Foundation of Tianjin Education Commission,China(Grant No.2011ZD02)the Key Science and Technology Support Program of Tianjin,China(Grant No.14ZCZDGX00006)the National High Technology Research and Development Program of China(Grant No.2013AA014201)
文摘We investigate the electron injection effect of inserting a thin aluminum（Al） layer into cesium carbonate（Cs2CO3）injection layer. Two groups of organic light-emitting devices（OLEDs） are fabricated. For the first group of devices based on Alq3, we insert a thin Al layer of different thickness into Cs2CO3 injection layer, and the device＇s maximum current efficiency of 6.5 cd/A is obtained when the thickness of the thin Al layer is 0.4 nm. However, when the thickness of Al layer is 0.8 nm, the capacity of electron injection is the strongest. To validate the universality of this approach, then we fabricate another group of devices based on another blue emitting material. The maximum current efficiency of the device without and with a thin Al layer is 4.51 cd/A and 4.84 cd/A, respectively. Inserting a thin Al layer of an appropriate thickness into Cs2CO3 layer can result in the reduction of electron injection barrier, enhancement of the electron injection, and improvement of the performance of OLEDs. This can be attributed to the mechanism that thermally evaporated Cs2CO3 decomposes into cesium oxides, the thin Al layer reacts with cesium oxides to form Al–O–Cs complex, and the amount of the Al–O–Cs complex can be controlled by adjusting the thickness of the thin Al layer.
基金Project supported by the National Natural Science Foundation of China(Grant No.60906022)the Natural Science Foundation of Tianjin,China(Grant No.10JCYBJC01100)+1 种基金the Key Science and Technology Support Program of Tianjin,China(Grant No.14ZCZDGX00006)the National High Technology Research and Development Program of China(Grant No.2013AA014201)
文摘We chose pentacene as a hole injection layer（HIL） to fabricate the high performance blue fluorescent organic lightemitting devices（OLEDs）. We found that the carrier mobility of the pentacene thin films could be efficiently improved after a critical annealing at temperature 120℃. Then we performed the tests of scanning electron microscopy, atomic force microscopy, and Kelvin probe to explore the effect of annealing on the pentacene films. The pentacene film exhibited a more crystalline form with better continuities and smoothness after annealing. The optimal device with 120℃ annealed pentacene film and n-doped electron transport layer（ETL） presents a low turn-on voltage of 2.6 V and a highest luminance of 134800 cd/m^2 at 12 V, which are reduced by 26% and improved by 50% compared with those of the control device.
文摘In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.
基金the National Natural Science Foundation of China (Grant Nos.61204087, 61306099)the Guangdong Natural Science Foundation (Grant No. S2012040007003)+2 种基金China Postdoctoral Science Foundation (2013M531841)the Fundamental Research Funds for the Central Universities (2014ZM0003, 2014ZM0034, 2014ZM0037, 2014ZZ0028)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20120172120008)
文摘A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.
基金Project supported by NSC(98-2221-E-214-003-MY3 and ISU99-01-06)
文摘We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.61136003 and 61275041)the Project of Science and TechnologyCommission of Shanghai Municipality,China(Grant No.14XD1401800)
文摘We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.
基金Project supported by the National Basic Research Program of China (Grant No. 2009CB623605)the National Natural Science Foundation of China (Grant No. 50673035)Program for New Century Excellent Talents in Universities of Ministry of Education,the 111 Project (Grant No. B06009)
文摘White organic light-emitting diodes with a blue emitting material fluorene-centred ethylene-liked carbazole oligomer （Cz6F） doped into polyvinyl carbazole （PVK） as the single light-emitting layer are reported. The optical properties of Cz6F, PVK, and PVK：Cz6F blends are studied. Single and double layer devices are fabri- cated by using PVK： Cz6F blends, and the device with the configuration of indium tin oxide （ITO）/PVK：Cz6F/ tris（8-hydroxyquinolinate）aluminium （Alq3）/LiF/A1 exhibits white light emission with Commission Internationale de l＇Eclairage chromaticity coordinates of （0.30, 0.33） and a brightness of 402 cd/m^2. The investigation reveals that the white light is composed of a blue-green emission originating from the excimer of Cz6F molecules and a red emission from an electroplex from the PVK：Cz6F blend films.
基金the National Key Research and Development Program of China (Grant No. 2016YFF02033604)the Guangdong Natural Science Foundation (Grant Nos. 2014A030310253, 2016A030310360)+2 种基金the Fundamental Research Funds for the Central Universities (Grant No. 2015ZM070)the National Natural Science Foundation of China (Grant No. 51602065)the Guangdong Science and Technology Plan (Grant Nos. 2016A040403037, 2016A010101026)
文摘The interlayer(IL) plays a vital role in hybrid white organic light-emitting diodes(WOLEDs); however,only a negligible amount of attention has been given to n-type ILs. Herein, the n-type IL, for the first time,has been demonstrated to achieve a high efficiency, high color rendering index(CRI), and low voltage trade-off.The device exhibits a maximum total efficiency of 41.5 lm W^(-1), the highest among hybrid WOLEDs with n-type ILs. In addition, high CRIs(80–88) at practical luminances(C1000 cd m^(-2)) have been obtained, satisfying the demand for indoor lighting. Remarkably, a CRI of 88 is the highest among hybrid WOLEDs. Moreover, the device exhibits low voltages, with a turn-on voltage of only 2.5 V([1 cd m^(-2)), which is the lowest among hybrid WOLEDs. The intrinsic working mechanism of the device has also been explored; in particular, the role of n-type ILs in regulating the distribution of charges and excitons has been unveiled. The findings demonstrate that the introduction of n-type ILs is effective in developing high-performance hybrid WOLEDs.
基金supported by the Program for New Century Excellent Talents in University of Ministry of Education of China(Grant No.NCET-13-0927)the International Science&Technology Cooperation Program of China(Grant No.2012DFR50460)+1 种基金the National Natural Science Foundation of China(Grant Nos.21101111 and 61274056)the Shanxi Provincial Key Innovative Research Team in Science and Technology,China(Grant No.2012041011)
文摘Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.
基金Project supported by the National Natural Science Foundation of China （Grant No. 60906022）, the Natural Science Foundation of Tianjin, China （Grant No. 10JCYBJC01100）, the Scientific Developing Foundation of Tianjin Education Commission, China （Grant No. 2011ZD02）, and the Tianjin Natural Science
文摘Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.
基金Supported by the Nanjing University of Telecommunication and Posts under Grant No NY212010the National Natural Science Foundation of China under Grant Nos 91233117,50973104 and 51333007+2 种基金the Natural Science Fund of Jiangsu Province under Grant No BK2012834the National Basic Research Program of China under Grant No 2015CB932200the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A high-efficiency green phosphorescent organic light emitting diode with a simplified structure is achieved that is free of a hole transport layer. The design of this kind of device structure not only saves the consumption of organic materials but also greatly reduces the structural heterogeneities and effectively facilitates the charge injection into the emissive layer. The resulting green phosphorescent organic light-emitting diodes （PHOLEDs） exhibit higher electroluminescent efficiency. The maximum external quantum efficiency and current efficiency reach 23.7% and 88 cd/A, respectively. Moreover the device demonstrates satisfactory stability, keeping 23.7% and 88cd/A, 22% and 82cd/A, respectively, at a luminance of 100 and 1000cd/m2. The working mechanism for achieving high efficiency based on such a simple device structure is discussed correspondingly. The improved charge carrier injection and transport balance are proved to prominently contribute to achieve the high efficiency and great stability at high luminance in the green PHOLEDs.
基金Supported by the National Natural Science Foundation of China under Grant No 61076066the Innovation Project of Science and Technology Plan Projects of Shaanxi Province under Grant No 2011KTCQ01-09
文摘A new interlayer is successfully used to be a universal carrier switch, developing high-performance hybrid white organic light-emitting diodes （WOLEDs）. By dint of this interlayer, the two-color hybrid WOLED shows a maximum total current efficiency （CE） and power efficiency （PE） of 48.1 cd/A and 37.6 Im/W, respectively, while the three-color hybrid WOLED shows a maximum total CE and PE of 33.8 cd/A and 25.7Im/W, respectively. The color rendering index of the three-color hybrid WOLEDs are ≥ 75, which is already a sufficient level for many commercial lighting applications. In addition, both the two-color and three-color hybrid WOLEDs show low efficiency roll-off and stable color. Furthermore, devices with the new interlayer show much higher performance than devices with the most commonly used 4,4-N,N-dicarbazolebiphenyl and N,N＇-di（naphthalene-l-yl）-N,N＇- diphenyl-benzidine interlayers.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61177017,61125505,60978061,61077022,61036007,and 60877005)the 111 Project (Grant No. B08002)
文摘We report on white organic light-emitting diodes （WOLEDs） based on polyvinylcarbazole （PVK） doped with 1,1-bis（（di-4-tolylamino）phenyl）cyclohexane （TAPC） and perylene, and investigate the luminescence mechanism of the devices. The chromaticity of light emission can be tuned by adjusting the concentration of the dopants. White light with the Commission Internationale de L＇Eclairage （CIE） coordinates of （0.33, 0.34） is achieved by mixing the yellow electromer emission of TAPC and the blue monomer emission of perylene from the device ITO/PVK： TAPC： perylene （100：9：1 in wt.） （100 nm）/tris-（8-hydroxyquinoline aluminum （Alq3） （10 nm）/A1. The device exhibits a maximal luminance of 3727 cd/m2 and a current efficiency of 2 cd/A.
