A three-dimensional finite element simulation was carried out to investigate the effects of tunnel construction on nearby pile foundation.The displacement controlled model (DCM) was used to simulate the tunneling-indu...A three-dimensional finite element simulation was carried out to investigate the effects of tunnel construction on nearby pile foundation.The displacement controlled model (DCM) was used to simulate the tunneling-induced volume loss effects.The numerical model was verified based on the results of a centrifuge test and a set of parametric studies was implemented based on this model.There is good agreement between the trend of the results of the centrifuge test and the present model.The results of parametric studies show that the tunnelling-induced pile internal force and deformation depend mainly on the pile?tunnel distance,the pile length to tunnel depth ratio and the volume loss.Two different zones are separated by a 45° line projected from the tunnel springline.Within the zone of influence,the pile is subjected to tensile force and large settlement;whereas outside the zone of influence,dragload and small settlement are induced.It is also established that the impact of tunnelling on a pile group is substantially smaller as compared with a single pile in the same location with the rear pile in a group,demonstrating a positive pile group effect.展开更多
A finite element algorithm combined with divergence condition was presented for computing three-dimensional(3D) magnetotelluric forward modeling. The finite element equation of three-dimensional magnetotelluric forwar...A finite element algorithm combined with divergence condition was presented for computing three-dimensional(3D) magnetotelluric forward modeling. The finite element equation of three-dimensional magnetotelluric forward modeling was derived from Maxwell's equations using general variation principle. The divergence condition was added forcedly to the electric field boundary value problem, which made the solution correct. The system of equation of the finite element algorithm was a large sparse, banded, symmetric, ill-conditioned, non-Hermitian complex matrix equation, which can be solved using the Bi-CGSTAB method. In order to prove correctness of the three-dimensional magnetotelluric forward algorithm, the computed results and analytic results of one-dimensional geo-electrical model were compared. In addition, the three-dimensional magnetotelluric forward algorithm is given a further evaluation by computing COMMEMI model. The forward modeling results show that the algorithm is very efficient, and it has a lot of advantages, such as the high precision, the canonical process of solving problem, meeting the internal boundary condition automatically and adapting to all kinds of distribution of multi-substances.展开更多
In the finite element method,the numerical simulation of three-dimensional crack propagation is relatively rare,and it is often realized by commercial programs.In addition to the geometric complexity,the determination...In the finite element method,the numerical simulation of three-dimensional crack propagation is relatively rare,and it is often realized by commercial programs.In addition to the geometric complexity,the determination of the cracking direction constitutes a great challenge.In most cases,the local stress state provides the fundamental criterion to judge the presence of cracks and the direction of crack propagation.However,in the case of three-dimensional analysis,the coordination relationship between grid elements due to occurrence of cracks becomes a difficult problem for this method.In this paper,based on the extended finite element method,the stress-related function field is introduced into the calculation domain,and then the boundary value problem of the function is solved.Subsequently,the envelope surface of all propagation directions can be obtained at one time.At last,the possible surface can be selected as the direction of crack development.Based on the aforementioned procedure,such method greatly reduces the programming complexity of tracking the crack propagation.As a suitable method for simulating tension-induced failure,it can simulate multiple cracks simultaneously.展开更多
Generally, viscoelastic solid constitutive equation can be written into differential form and integral form. From differential form of constitutive equation the mathematical representation of the state space equation ...Generally, viscoelastic solid constitutive equation can be written into differential form and integral form. From differential form of constitutive equation the mathematical representation of the state space equation can be derived. Due to the state space equation, general constitutive equation can be solved by precise integration method that can be used in many fields with the advantages of highly precision and convenience. For linear viscoelastic solids with crack, the finite elements program of the precise integration method for viscoelastic solid is developed, which appears to be efficient and precise. C-integral is used to be the characterising parameter.展开更多
The present study explored the influence of axial gradation of viscoelastic materials on the dynamic response of the sandwich beam for structural applications.The finite element(FE)formulations are used to model and i...The present study explored the influence of axial gradation of viscoelastic materials on the dynamic response of the sandwich beam for structural applications.The finite element(FE)formulations are used to model and investigate dynamic response of the sandwich beam.The classical beam theory is used to develop the FE formulations and Lagrange's approach is considered to obtain the equations of motion(EOM).FE code is developed and validated with the existing literature and also conducted the convergence study for the developed FE method.Further,the influence of different viscoelastic materials and boundary conditions on the dynamic response of the sandwich beam is investigated.Four different axial gradation configurations of viscoelastic materials are considered for the present work to explore the influence on natural frequency,loss factor and frequency response of the sandwich beam.The modeled axial gradation of viscoelastic material has displayed a considerable impact on the peak vibrational amplitude response of the sandwich beam for all the boundary conditions and these configurations improved the damping capabilities at different configurations for the structural applications.展开更多
文摘A three-dimensional finite element simulation was carried out to investigate the effects of tunnel construction on nearby pile foundation.The displacement controlled model (DCM) was used to simulate the tunneling-induced volume loss effects.The numerical model was verified based on the results of a centrifuge test and a set of parametric studies was implemented based on this model.There is good agreement between the trend of the results of the centrifuge test and the present model.The results of parametric studies show that the tunnelling-induced pile internal force and deformation depend mainly on the pile?tunnel distance,the pile length to tunnel depth ratio and the volume loss.Two different zones are separated by a 45° line projected from the tunnel springline.Within the zone of influence,the pile is subjected to tensile force and large settlement;whereas outside the zone of influence,dragload and small settlement are induced.It is also established that the impact of tunnelling on a pile group is substantially smaller as compared with a single pile in the same location with the rear pile in a group,demonstrating a positive pile group effect.
基金Project(60672042) supported by the National Natural Science Foundation of China
文摘A finite element algorithm combined with divergence condition was presented for computing three-dimensional(3D) magnetotelluric forward modeling. The finite element equation of three-dimensional magnetotelluric forward modeling was derived from Maxwell's equations using general variation principle. The divergence condition was added forcedly to the electric field boundary value problem, which made the solution correct. The system of equation of the finite element algorithm was a large sparse, banded, symmetric, ill-conditioned, non-Hermitian complex matrix equation, which can be solved using the Bi-CGSTAB method. In order to prove correctness of the three-dimensional magnetotelluric forward algorithm, the computed results and analytic results of one-dimensional geo-electrical model were compared. In addition, the three-dimensional magnetotelluric forward algorithm is given a further evaluation by computing COMMEMI model. The forward modeling results show that the algorithm is very efficient, and it has a lot of advantages, such as the high precision, the canonical process of solving problem, meeting the internal boundary condition automatically and adapting to all kinds of distribution of multi-substances.
基金Project(2017YFC0404802)supported by the National Key R&D Program of ChinaProjects(U1965206,51979143)supported by the National Natural Science Foundation of China。
文摘In the finite element method,the numerical simulation of three-dimensional crack propagation is relatively rare,and it is often realized by commercial programs.In addition to the geometric complexity,the determination of the cracking direction constitutes a great challenge.In most cases,the local stress state provides the fundamental criterion to judge the presence of cracks and the direction of crack propagation.However,in the case of three-dimensional analysis,the coordination relationship between grid elements due to occurrence of cracks becomes a difficult problem for this method.In this paper,based on the extended finite element method,the stress-related function field is introduced into the calculation domain,and then the boundary value problem of the function is solved.Subsequently,the envelope surface of all propagation directions can be obtained at one time.At last,the possible surface can be selected as the direction of crack development.Based on the aforementioned procedure,such method greatly reduces the programming complexity of tracking the crack propagation.As a suitable method for simulating tension-induced failure,it can simulate multiple cracks simultaneously.
文摘Generally, viscoelastic solid constitutive equation can be written into differential form and integral form. From differential form of constitutive equation the mathematical representation of the state space equation can be derived. Due to the state space equation, general constitutive equation can be solved by precise integration method that can be used in many fields with the advantages of highly precision and convenience. For linear viscoelastic solids with crack, the finite elements program of the precise integration method for viscoelastic solid is developed, which appears to be efficient and precise. C-integral is used to be the characterising parameter.
基金support from the Department of Science and Technology (DST)file no.ECR/2016/001448 titled“Experimental Investigation of Passive,Semi-active and Active vibration control of Composite Sandwich Structure”funded by Science and Engineering Research Board,Government of India。
文摘The present study explored the influence of axial gradation of viscoelastic materials on the dynamic response of the sandwich beam for structural applications.The finite element(FE)formulations are used to model and investigate dynamic response of the sandwich beam.The classical beam theory is used to develop the FE formulations and Lagrange's approach is considered to obtain the equations of motion(EOM).FE code is developed and validated with the existing literature and also conducted the convergence study for the developed FE method.Further,the influence of different viscoelastic materials and boundary conditions on the dynamic response of the sandwich beam is investigated.Four different axial gradation configurations of viscoelastic materials are considered for the present work to explore the influence on natural frequency,loss factor and frequency response of the sandwich beam.The modeled axial gradation of viscoelastic material has displayed a considerable impact on the peak vibrational amplitude response of the sandwich beam for all the boundary conditions and these configurations improved the damping capabilities at different configurations for the structural applications.
文摘为研究声发射信号在木材中的传播行为,分别对杨木、红锥、樟子松和杉木4种木材试件建立COMSOL三维仿真模型,通过给定位移的方法模拟弹性波点源,进而借助仿真过程的应力云图分析声发射(acoustic emission,AE)信号沿木材纵向传播的过程。针对AE源到达模型表面2个位置的时间差,利用时差定位法(time difference of arrival,TDOA)计算AE源的纵波波速。在木材试件上以相同条件进行AE试验并计算纵波波速,最终结果与仿真模型相符。研究结果表明,杨木、红锥、樟子松和杉木4种木材仿真与试验的纵波波速的相对误差分别为1.47%、1.04%、0.46%和2.33%,仿真模型能够客观反映AE信号在木材中的传播行为,为木材AE信号传播过程可视化提供一种新的途径。但AE信号幅值的相对误差较大,模型不能客观反映木材中幅值的变化规律。
