Thermal quenching(TQ)at elevated temperature is a major factor affecting the luminescent intensity and efficiency of phosphors.Improving the thermal stability of phosphors and weakening the TQ effect are of significan...Thermal quenching(TQ)at elevated temperature is a major factor affecting the luminescent intensity and efficiency of phosphors.Improving the thermal stability of phosphors and weakening the TQ effect are of significance for the high-quality illumination of phosphor-converted WLEDs.Here,a novel red-emitting phosphor K_(2)Zn(PO_(3))_(4)∶Mn^(2+)is synthesized by standard high temperature solid state reaction in ambient atmosphere,which is a new member of self-reduction system.An effective synthesis strategy is proposed to optimize its photoluminescent performances.Combined with X-ray photoelectron spectroscopy and X-ray absorption fine structure spectroscopy,oxygen vacancy defects introduced by Mn doping are proved to play an important role in the transition of Mn^(4+)→Mn^(2+).Thermoluminescence analysis reveals that the distribution of trap levels,especially the deep ones,is effectively regulated by the controllable crystallization and significantly affect the thermal stability of phosphors.Then a defect-assisted model is proposed to address the inner mechanism of the phenomenon.The carriers trapped by deep trap levels can be released under the high-temperature stimulus,which return back to the luminescent centers and participate in the radiative recombination to improve thermal stability.This study provides a new crystallographic idea and theoretical support for obtaining luminescent materials with high thermal stability.展开更多
Alpha-aluminum hydride(α-AlH_(3))is usually metastable due to the small enthalpy of formation,poor stability,high chemical activity,sensitivity to moisture and easy combination with water in the air.In order to inhib...Alpha-aluminum hydride(α-AlH_(3))is usually metastable due to the small enthalpy of formation,poor stability,high chemical activity,sensitivity to moisture and easy combination with water in the air.In order to inhibit the hygroscopicity ofα-AlH_(3) and improve its storage and stability,paraffin wax(PW)is selected as the coating material,and the solvent/non-solvent method is usually used to coat the surface ofα-AlH_(3).The structure and topography ofα-AlH_(3) before and after being coated by PW were characterized by Fourier transform infrared spectroscopy(FT-IR),X-ray diffractometer(XRD),X-ray electron spectroscopy(XPS),elemental analysis,and scanning electron microscopy(SEM).The results show that PW can form a uniform and complete coating layer on the surface ofα-AlH_(3),and the crystal structure and morphology of theα-AlH_(3) coated by PW are not changed.The moisture absorption weight gain rate is reduced from 12%to 0.8%,and the hygroscopicity is greatly reduced.Furthermore,theα-AlH_(3) coated by PW also showed excellent performance in resisting water erosion after theα-AlH_(3) coated by PW,and the hydrophobic angle increases from 27°to 98°after theα-AlH_(3) surface being coated by PW.展开更多
To study the rolling motion of a ship in the presence of water on its deck,a linear-plus-quadratic damping term was incorporated into its equation of motion.Ship model tests indicates that the key dynamics of the phys...To study the rolling motion of a ship in the presence of water on its deck,a linear-plus-quadratic damping term was incorporated into its equation of motion.Ship model tests indicates that the key dynamics of the physical system are preserved in the ship rolling equation with the linear-plus-quadratic type damping term.To take into account the presence of randomness in the excitation and the response,a new method was developed and a Melnikov criterion was obtained to provide an upper bound on the domain of the potential chaotic rolling motion(erratic rocking).Additionally,the Melnikov criterion proposed in this study was verified by the utilization of phase plane diagrams and Poincare maps.Furthermore,this research has made the initial endeavor to systematically modify the system parameters in the rolling equation of motion for ship stability analysis.展开更多
Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,t...Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,their practical use is hindered by the slow redox kinetics of sulfur and the“shuttle effect”arising from dissolved lithium polysulfides(LiPSs).In recent years,various carbon-based materials have served as sulfur hosts and catalysts for accelerating sulfur conversion redox kinetics and alleviating LiPS shuttling.However,they often suffer from irreversible passivation and structural changes that destroy their long-term performance.We consider the main problems limiting their stability,including excessive LiPS adsorption,passivation by insulating Li2S,and surface reconstruction,and clarify how these factors lead to capacity fade.We then outline effective strategies for achieving long-term sulfur catalysis,focusing on functional carbon,such as designing suitable carbon-supported catalyst interfaces,creating well-distributed active sites,adding cocatalysts to improve electron transfer,and using carbon-based protective layers to suppress unwanted side reactions.Using this information should enable the development of stable,high-activity catalysts capable of long-term operation under practical conditions in Li-S batteries.展开更多
Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-s...Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.展开更多
In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin proj...In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin projectile.The platform's reliability is validated by reproducing the characteristic resonance instability of such projectiles.By coupling the solution of the Unsteady Reynolds-Averaged Navier-Stokes equations and the seven-degree-of-freedom RBD equations,the virtual flight simulations of fixed canard dual-spin projectiles at various curvature trajectories are achieved,and the dynamic mechanism of the trajectory following process is analyzed.The instability mechanism of the dynamic instability during trajectory following process of the fixed canard dual-spin projectile is elucidated by simulating the rolling/coning coupled forced motion,and subsequently validated through virtual flight simulations.The findings suggest that an appropriate yaw moment can drive the projectile axis to precession in the tangential direction of the trajectory,thereby enhancing the trajectory following stability.However,the damping of the projectile attains its minimum value when the forward body equilibrium rotational speed(-128 rad/s)is equal to the negative of the fast mode frequency of the projectile.Insufficient damping leads to the fixed canard dual-spin projectile exiting the dynamic stability domain during the trajectory following,resulting in weakly damped instability.Keeping the forward body not rotating or increasing the spin rates to-192 rad/s can enhance the projectile's damping,thereby improving its dynamic stability.展开更多
Rich-nickel layered ternary NCM811 has been widely used in the field of electric vehicles ascribed to its high theoretical specific capacity.However,poor cycling stability and rate-performance hindered its further dev...Rich-nickel layered ternary NCM811 has been widely used in the field of electric vehicles ascribed to its high theoretical specific capacity.However,poor cycling stability and rate-performance hindered its further development.Herein,different amounts of nitrogen-doped carbon were wrapped on the surface of NCM811 via a facile rheological phase method by regulating the amount of dopamine hydrochloride.The effects of the coating amounts on the structure and electrochemical performance are investigated.The DFT calculation,XRD,SEM and XPS reveal that an appropriate amount of nitrogen-doped carbon coating could uniformly form a protective layer on the NCM811 surface and the introduced N could anchor Ni atoms to inhibit the Li^(+)/Ni^(2+)mixing,but excessive amount would reduce Ni^(3+)to Ni^(2+)so as to conversely aggravate Li^(+)/Ni^(2+)mixing.Among the samples,the NCM811-CN0.75 sample exhibits the most excellent electrochemical performance,delivering a high-rate capacity of 151.6 mA·h/g at 10C,and long-term cyclability with 82.2%capacity retention after 300 cycles at 5C,exhibiting remarkable rate-performance and cyclability.展开更多
The simultaneous integration of high energy density,low sensitivity,and thermal stability in energetic materials has constituted a century-long scientific challenge.Herein,we address this through a dualzwitterionic el...The simultaneous integration of high energy density,low sensitivity,and thermal stability in energetic materials has constituted a century-long scientific challenge.Herein,we address this through a dualzwitterionic electronic delocalization strategy,yielding TYX-3,the first bis-inner salt triazolo-tetrazine framework combining these mutually exclusive properties.Uniformπ-electron distribution and elevated bond dissociation energy confer exceptional thermal stability(T_(d)=365℃)with TATB-level insensitivity(impact sensitivity IS>40 J,friction sensitivity FS>360 N).Engineeredπ-stacked networks enable record density(1.99 g·cm^(-3))with detonation performance surpassing HMX benchmarks(detonation velocity 9315 m·s^(-1),detonation pressure 36.6 GPa).Practical implementation in Poly(3-nitratomethyl-3-methyloxetane)(PNMMFO)solid propellants demonstrates 5.4-fold safety enhancement over conventional HMX-based formulations while maintaining equivalent specific impulse.This work establishes a new design paradigm for energetic materials,overcoming the historical trade-offs between molecular stability and energy output through rational zwitterionic engineering.展开更多
To accurately identify the factors affecting the formation of stable aggregates in bauxite residue during the soil formation process,the comprehensive effects of a combined chemical-biological amelioration strategy in...To accurately identify the factors affecting the formation of stable aggregates in bauxite residue during the soil formation process,the comprehensive effects of a combined chemical-biological amelioration strategy including solid wastes and a functional microorganism on aggregate size distribution and its stability in bauxite residue were investigated during a 365-d simulation experiment.The results showed that the combined amelioration effectively reduced the saline alkalinity of bauxite residue,and markedly changed the contents of aggregate-associated chemical binding agents.Desulfurization gypsum and maize straw-Penicillium oxalicum(P.oxalicum)differentiated the formation of aggregates within different sizes.Maize straw-P.oxalicum stimulated the formation of water-stable macroaggregates with more durable erosion resistance by the wet-sieving and laser dynamic diffraction analysis.The Pearson correlation analysis showed that exchangeable polyvalent metal ions,pyrophosphate extractable Fe oxide,and organic carbon exhibited positive correlations with aggregate stability during the 365-d incubation.The findings in this study may provide data support and engineering practical reference for ecological restoration in the disposal areas.展开更多
In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefo...In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefore,in this study,based on the stepped failure mode of bedding jointed rock slopes,considering the influence of the upper rock mass on the lower stepped sliding mass,the improved failure model for analyzing the interaction force(F_(AB))between two regions is constructed,and the safety factors(F_(S))of two regions and whole region are derived.In addition,this paper proposes a method to determine the existence of F_(AB) using their respective acceleration values(a_(A) and a_(B))when regions A and B are unstable.The influences of key parameters on two regions and the whole region are analyzed.The results show that the variation of the F_(AB) and F_(S) of two regions can be obtained accurately based on the improved failure model.The accuracy of the improved failure model is verified by comparative analysis.The research results can explain the interaction mechanism of two regions and the natural phenomenon of slope failure caused by the development of cracks.展开更多
This study proposes an alternative calculation mode for stresses on the slip surface(SS).The calculation of the normal stress(NS)on the SS involves examining its composition and expanding its unknown using the Taylor ...This study proposes an alternative calculation mode for stresses on the slip surface(SS).The calculation of the normal stress(NS)on the SS involves examining its composition and expanding its unknown using the Taylor series.This expansion enables the reasonable construction of a function describing the NS on the SS.Additionally,by directly incorporating the nonlinear Generalized Hoke-Brown(GHB)strength criterion and utilizing the slope factor of safety(FOS)definition,a function of the shear stress on the SS is derived.This function considers the mutual feedback mechanism between the NS and strength parameters of the SS.The stress constraints conditions are then introduced at both ends of the SS based on the spatial stress relation of one point.Determining the slope FOS and stress solution for the SS involves considering the mechanical equilibrium conditions and the stress constraint conditions satisfied by the sliding body.The proposed approach successfully simulates the tension-shear stress zone near the slope top and provides an intuitive description of the concentration effect of compression-shear stress of the SS near the slope toe.Furthermore,compared to other methods,the present method demonstrates superior processing capabilities for the embedded nonlinear GHB strength criterion.展开更多
The development of superhydrophobic materials has demonstrated significant potential in the realm ofcorrosion protection for aluminum alloy(Al alloy)surfaces.However,the limited mechanical stability ofsuperhydrophobic...The development of superhydrophobic materials has demonstrated significant potential in the realm ofcorrosion protection for aluminum alloy(Al alloy)surfaces.However,the limited mechanical stability ofsuperhydrophobic surfaces has impeded the rapid advancement in this field.In this research,we synthesized analuminum phosphate(AP)inorganic binder and combined it with hydrophobic fumed SiO_(2)(HF-SiO_(2))nanoparticles andpolydimethylsiloxane(PDMS)to develop a HF-SiO_(2)@PDMS@AP superhydrophobic composite coating with improvedmechanical stability on Al alloy substrates using a simple spray-coating technique.The findings indicate that the additionof the AP inorganic binder significantly enhanced the coating’s resistance to abrasion,maintaining its superhydrophobicproperties and micro-nano hierarchical structure even after being subjected to a sandpaper abrasion distance of 2000 cm.Electrochemical impedance spectroscopy(EIS)testing showed that the low-frequency modulus(|Z|0.01Hz)of theHF-SiO_(2)@PDMS@AP superhydrophobic coating increased by four orders of magnitude compared to the initial Al alloysubstrate,resulting in a substantial improvement in corrosion protection capacity.The impressive corrosion resistanceand mechanical stability exhibited by this coating have the potential to greatly expand the practical applications of suchmaterials for surface functional protection in marine and industrial environments.展开更多
In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiat...In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiation area is required for the extracted ion beams,which is crucial because it directly affects the experimental precision and therapeutic effect.Specifically,ultra-large-area and high-uniformity scanning are crucial requirements for spacecraft radiation effects assessment and serve as core specification for beamline terminal design.In the 300 MeV proton and heavy ion accelerator complex at the Space Environment Simulation and Research Infrastructure(SESRI),proton and heavy ion beams will be accelerated and ultimately delivered to three irradiation terminals.In order to achieve the required large irradiation area of 320 mm×320 mm,horizontal and vertical scanning magnets are used in the extraction beam line.However,considering the various requirements for beam species and energies,the tracking accuracy of power supplies(PSs),the eddy current effect of scanning magnets,and the fluctuation of ion bunch structure will reduce the irradiation uniformity.To mitigate these effects,a beam uniformity optimization method based on the measured beam distribution was proposed and applied in the accelerator complex at SESRI.In the experiment,the uniformity is successfully optimized from 75%to over 90%after five iterations of adjustment to the PS waveforms.In this paper,the method and experimental results were introduced.展开更多
In the area of control theory the time-delay systems have been investigated. It's well known that delays often result in instability, therefore, stability analysis of time-delay systems is an important subject in ...In the area of control theory the time-delay systems have been investigated. It's well known that delays often result in instability, therefore, stability analysis of time-delay systems is an important subject in control theory. As a result, many criteria for testing the stability of linear time-delay systems have been proposed. Significant progress has been made in the theory of impulsive systems and impulsive delay systems in recent years. However, the corresponding theory for uncertain impulsive systems and uncertain impulsive delay systems has not been fully developed. In this paper, robust stability criteria are established for uncertain linear delay impulsive systems by using Lyapunov function, Razumikhin techniques and the results obtained. Some examples are given to illustrate our theory.展开更多
The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, ...The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.展开更多
A new robust bio-inspired route by using lysozyme aqueous solution for surface modification on 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)was described in this paper.HMX crystals were coated by in situ phase transitio...A new robust bio-inspired route by using lysozyme aqueous solution for surface modification on 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)was described in this paper.HMX crystals were coated by in situ phase transition of lysozyme(PTL)molecules.The HMX decorated by PTL was characterized by SEM,XRD,FTIR and XPS,demonstrating a dense core-shell coating layer.The coverage of lysozyme on HMX crystal was calculated by the ratio of sulfur content.The surface coverage increased from 60.5% to 93.5% when the content of PTL was changed from 0.5 wt% to 2.0 wt%,indicating efficient coating.The thermal stability of HMX was investigated by in situ XRD and DSC.The thermal phase transition temperature of HMX(β to δ phase)was delayed by 42℃ with 2.0 wt% PTL coating,which prevented HMX from thermal damage and sensitivity by the effect of PTL coating.After heating at 215℃,large cracks appeared in the naked HMX crystal,while the PTL coated HMX still maintained intact,with the impact energy of HMX dropped dramatically from 5 J to 2 J.However,the impact energy of HMX with 1.0 wt% and 2.0 wt% coating content(HMX@PTL-1.0 and HMX@PTL-2.0)was unchanged(5 J).Present results potentially enable large-scale fabrication of polymorphic energetic materials with outstanding thermal stability by novel lysozyme coating.展开更多
The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of osci...The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.展开更多
Underground energy and resource development,deep underground energy storage and other projects involve the global stability of multiple interconnected cavern groups under internal and external dynamic disturbances.An ...Underground energy and resource development,deep underground energy storage and other projects involve the global stability of multiple interconnected cavern groups under internal and external dynamic disturbances.An evaluation method of the global stability coefficient of underground caverns based on static overload and dynamic overload was proposed.Firstly,the global failure criterion for caverns was defined based on its band connection of plastic-strain between multi-caverns.Then,overloading calculation of the boundary geostress and seismic intensity on the caverns model was carried out,and the critical unstable state of multi-caverns can be identified,if the plastic-strain band appeared between caverns during these overloading processes.Thus,the global stability coefficient for the multi-caverns under static loading and earthquake was obtained based on the corresponding overloading coefficient.Practical analysis for the Yingliangbao(YLB)hydraulic caverns indicated that this method can not only effectively obtain the global stability coefficient of caverns under static and dynamic earthquake conditions,but also identify the caverns’high-risk zone of local instability through localized plastic strain of surrounding rock.This study can provide some reference for the layout design and seismic optimization of underground cavern group.展开更多
文摘Thermal quenching(TQ)at elevated temperature is a major factor affecting the luminescent intensity and efficiency of phosphors.Improving the thermal stability of phosphors and weakening the TQ effect are of significance for the high-quality illumination of phosphor-converted WLEDs.Here,a novel red-emitting phosphor K_(2)Zn(PO_(3))_(4)∶Mn^(2+)is synthesized by standard high temperature solid state reaction in ambient atmosphere,which is a new member of self-reduction system.An effective synthesis strategy is proposed to optimize its photoluminescent performances.Combined with X-ray photoelectron spectroscopy and X-ray absorption fine structure spectroscopy,oxygen vacancy defects introduced by Mn doping are proved to play an important role in the transition of Mn^(4+)→Mn^(2+).Thermoluminescence analysis reveals that the distribution of trap levels,especially the deep ones,is effectively regulated by the controllable crystallization and significantly affect the thermal stability of phosphors.Then a defect-assisted model is proposed to address the inner mechanism of the phenomenon.The carriers trapped by deep trap levels can be released under the high-temperature stimulus,which return back to the luminescent centers and participate in the radiative recombination to improve thermal stability.This study provides a new crystallographic idea and theoretical support for obtaining luminescent materials with high thermal stability.
文摘Alpha-aluminum hydride(α-AlH_(3))is usually metastable due to the small enthalpy of formation,poor stability,high chemical activity,sensitivity to moisture and easy combination with water in the air.In order to inhibit the hygroscopicity ofα-AlH_(3) and improve its storage and stability,paraffin wax(PW)is selected as the coating material,and the solvent/non-solvent method is usually used to coat the surface ofα-AlH_(3).The structure and topography ofα-AlH_(3) before and after being coated by PW were characterized by Fourier transform infrared spectroscopy(FT-IR),X-ray diffractometer(XRD),X-ray electron spectroscopy(XPS),elemental analysis,and scanning electron microscopy(SEM).The results show that PW can form a uniform and complete coating layer on the surface ofα-AlH_(3),and the crystal structure and morphology of theα-AlH_(3) coated by PW are not changed.The moisture absorption weight gain rate is reduced from 12%to 0.8%,and the hygroscopicity is greatly reduced.Furthermore,theα-AlH_(3) coated by PW also showed excellent performance in resisting water erosion after theα-AlH_(3) coated by PW,and the hydrophobic angle increases from 27°to 98°after theα-AlH_(3) surface being coated by PW.
文摘To study the rolling motion of a ship in the presence of water on its deck,a linear-plus-quadratic damping term was incorporated into its equation of motion.Ship model tests indicates that the key dynamics of the physical system are preserved in the ship rolling equation with the linear-plus-quadratic type damping term.To take into account the presence of randomness in the excitation and the response,a new method was developed and a Melnikov criterion was obtained to provide an upper bound on the domain of the potential chaotic rolling motion(erratic rocking).Additionally,the Melnikov criterion proposed in this study was verified by the utilization of phase plane diagrams and Poincare maps.Furthermore,this research has made the initial endeavor to systematically modify the system parameters in the rolling equation of motion for ship stability analysis.
文摘Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,their practical use is hindered by the slow redox kinetics of sulfur and the“shuttle effect”arising from dissolved lithium polysulfides(LiPSs).In recent years,various carbon-based materials have served as sulfur hosts and catalysts for accelerating sulfur conversion redox kinetics and alleviating LiPS shuttling.However,they often suffer from irreversible passivation and structural changes that destroy their long-term performance.We consider the main problems limiting their stability,including excessive LiPS adsorption,passivation by insulating Li2S,and surface reconstruction,and clarify how these factors lead to capacity fade.We then outline effective strategies for achieving long-term sulfur catalysis,focusing on functional carbon,such as designing suitable carbon-supported catalyst interfaces,creating well-distributed active sites,adding cocatalysts to improve electron transfer,and using carbon-based protective layers to suppress unwanted side reactions.Using this information should enable the development of stable,high-activity catalysts capable of long-term operation under practical conditions in Li-S batteries.
文摘Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2141254 and U23B6009)。
文摘In this paper,a high-fidelity computational fluid dynamics(CFD)and rigid body dynamics(RBD)coupled platform for virtual flight simulation is developed to investigate the flight stability of fixed canard dual-spin projectile.The platform's reliability is validated by reproducing the characteristic resonance instability of such projectiles.By coupling the solution of the Unsteady Reynolds-Averaged Navier-Stokes equations and the seven-degree-of-freedom RBD equations,the virtual flight simulations of fixed canard dual-spin projectiles at various curvature trajectories are achieved,and the dynamic mechanism of the trajectory following process is analyzed.The instability mechanism of the dynamic instability during trajectory following process of the fixed canard dual-spin projectile is elucidated by simulating the rolling/coning coupled forced motion,and subsequently validated through virtual flight simulations.The findings suggest that an appropriate yaw moment can drive the projectile axis to precession in the tangential direction of the trajectory,thereby enhancing the trajectory following stability.However,the damping of the projectile attains its minimum value when the forward body equilibrium rotational speed(-128 rad/s)is equal to the negative of the fast mode frequency of the projectile.Insufficient damping leads to the fixed canard dual-spin projectile exiting the dynamic stability domain during the trajectory following,resulting in weakly damped instability.Keeping the forward body not rotating or increasing the spin rates to-192 rad/s can enhance the projectile's damping,thereby improving its dynamic stability.
基金Project(2021H0028) supported by the Natural Scienceof Fujian Province,ChinaProject(JAT200455) supported by the Fujian Provincial Young and Middle-aged Teacher Education Project,ChinaProject(fma2023003) supported by the Open Fund of Fujian Provincial Key Laboratory of Functional Materials and Applications,China。
文摘Rich-nickel layered ternary NCM811 has been widely used in the field of electric vehicles ascribed to its high theoretical specific capacity.However,poor cycling stability and rate-performance hindered its further development.Herein,different amounts of nitrogen-doped carbon were wrapped on the surface of NCM811 via a facile rheological phase method by regulating the amount of dopamine hydrochloride.The effects of the coating amounts on the structure and electrochemical performance are investigated.The DFT calculation,XRD,SEM and XPS reveal that an appropriate amount of nitrogen-doped carbon coating could uniformly form a protective layer on the NCM811 surface and the introduced N could anchor Ni atoms to inhibit the Li^(+)/Ni^(2+)mixing,but excessive amount would reduce Ni^(3+)to Ni^(2+)so as to conversely aggravate Li^(+)/Ni^(2+)mixing.Among the samples,the NCM811-CN0.75 sample exhibits the most excellent electrochemical performance,delivering a high-rate capacity of 151.6 mA·h/g at 10C,and long-term cyclability with 82.2%capacity retention after 300 cycles at 5C,exhibiting remarkable rate-performance and cyclability.
基金supported by the National Natural Science Foundation of China(Grant Nos.22105156,22175139,22171136,and 22302156)the China National Science Fund for Distinguished Young Scholars(Grant No.22325504)。
文摘The simultaneous integration of high energy density,low sensitivity,and thermal stability in energetic materials has constituted a century-long scientific challenge.Herein,we address this through a dualzwitterionic electronic delocalization strategy,yielding TYX-3,the first bis-inner salt triazolo-tetrazine framework combining these mutually exclusive properties.Uniformπ-electron distribution and elevated bond dissociation energy confer exceptional thermal stability(T_(d)=365℃)with TATB-level insensitivity(impact sensitivity IS>40 J,friction sensitivity FS>360 N).Engineeredπ-stacked networks enable record density(1.99 g·cm^(-3))with detonation performance surpassing HMX benchmarks(detonation velocity 9315 m·s^(-1),detonation pressure 36.6 GPa).Practical implementation in Poly(3-nitratomethyl-3-methyloxetane)(PNMMFO)solid propellants demonstrates 5.4-fold safety enhancement over conventional HMX-based formulations while maintaining equivalent specific impulse.This work establishes a new design paradigm for energetic materials,overcoming the historical trade-offs between molecular stability and energy output through rational zwitterionic engineering.
基金Projects(42177391,42477437)supported by the National Natural Science Foundation of ChinaProject(2024RC3041)supported by the Science and Technology Innovation Program of Hunan Province,China+1 种基金Project(2023CXQD064)supported by the Innovation-Driven Research Programme of Central South University,ChinaProject(242102321124)supported by the Henan Provincal Science and Technology Research Project,China。
文摘To accurately identify the factors affecting the formation of stable aggregates in bauxite residue during the soil formation process,the comprehensive effects of a combined chemical-biological amelioration strategy including solid wastes and a functional microorganism on aggregate size distribution and its stability in bauxite residue were investigated during a 365-d simulation experiment.The results showed that the combined amelioration effectively reduced the saline alkalinity of bauxite residue,and markedly changed the contents of aggregate-associated chemical binding agents.Desulfurization gypsum and maize straw-Penicillium oxalicum(P.oxalicum)differentiated the formation of aggregates within different sizes.Maize straw-P.oxalicum stimulated the formation of water-stable macroaggregates with more durable erosion resistance by the wet-sieving and laser dynamic diffraction analysis.The Pearson correlation analysis showed that exchangeable polyvalent metal ions,pyrophosphate extractable Fe oxide,and organic carbon exhibited positive correlations with aggregate stability during the 365-d incubation.The findings in this study may provide data support and engineering practical reference for ecological restoration in the disposal areas.
基金Projects(52208369,52309138,52108320)supported by the National Natural Science Foundation of ChinaProjects(2023NSFSC0284,2025ZNSFSC0409)supported by the Sichuan Science and Technology Program,ChinaProject(U22468214)supported by the Joint Fund Project for Railway Basic Research by the National Natural Science Foundation of China and China State Railway Group Co.,Ltd.
文摘In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefore,in this study,based on the stepped failure mode of bedding jointed rock slopes,considering the influence of the upper rock mass on the lower stepped sliding mass,the improved failure model for analyzing the interaction force(F_(AB))between two regions is constructed,and the safety factors(F_(S))of two regions and whole region are derived.In addition,this paper proposes a method to determine the existence of F_(AB) using their respective acceleration values(a_(A) and a_(B))when regions A and B are unstable.The influences of key parameters on two regions and the whole region are analyzed.The results show that the variation of the F_(AB) and F_(S) of two regions can be obtained accurately based on the improved failure model.The accuracy of the improved failure model is verified by comparative analysis.The research results can explain the interaction mechanism of two regions and the natural phenomenon of slope failure caused by the development of cracks.
基金Project(52278380)supported by the National Natural Science Foundation of ChinaProject(2023JJ30670)supported by the National Science Foundation of and Technology Major Project of Hunan Province,China。
文摘This study proposes an alternative calculation mode for stresses on the slip surface(SS).The calculation of the normal stress(NS)on the SS involves examining its composition and expanding its unknown using the Taylor series.This expansion enables the reasonable construction of a function describing the NS on the SS.Additionally,by directly incorporating the nonlinear Generalized Hoke-Brown(GHB)strength criterion and utilizing the slope factor of safety(FOS)definition,a function of the shear stress on the SS is derived.This function considers the mutual feedback mechanism between the NS and strength parameters of the SS.The stress constraints conditions are then introduced at both ends of the SS based on the spatial stress relation of one point.Determining the slope FOS and stress solution for the SS involves considering the mechanical equilibrium conditions and the stress constraint conditions satisfied by the sliding body.The proposed approach successfully simulates the tension-shear stress zone near the slope top and provides an intuitive description of the concentration effect of compression-shear stress of the SS near the slope toe.Furthermore,compared to other methods,the present method demonstrates superior processing capabilities for the embedded nonlinear GHB strength criterion.
基金Projects(ZR2022YQ35,ZR2021LFG004)supported by the Shandong Provincial Natural Science Foundation,ChinaProject(2021207)supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences。
文摘The development of superhydrophobic materials has demonstrated significant potential in the realm ofcorrosion protection for aluminum alloy(Al alloy)surfaces.However,the limited mechanical stability ofsuperhydrophobic surfaces has impeded the rapid advancement in this field.In this research,we synthesized analuminum phosphate(AP)inorganic binder and combined it with hydrophobic fumed SiO_(2)(HF-SiO_(2))nanoparticles andpolydimethylsiloxane(PDMS)to develop a HF-SiO_(2)@PDMS@AP superhydrophobic composite coating with improvedmechanical stability on Al alloy substrates using a simple spray-coating technique.The findings indicate that the additionof the AP inorganic binder significantly enhanced the coating’s resistance to abrasion,maintaining its superhydrophobicproperties and micro-nano hierarchical structure even after being subjected to a sandpaper abrasion distance of 2000 cm.Electrochemical impedance spectroscopy(EIS)testing showed that the low-frequency modulus(|Z|0.01Hz)of theHF-SiO_(2)@PDMS@AP superhydrophobic coating increased by four orders of magnitude compared to the initial Al alloysubstrate,resulting in a substantial improvement in corrosion protection capacity.The impressive corrosion resistanceand mechanical stability exhibited by this coating have the potential to greatly expand the practical applications of suchmaterials for surface functional protection in marine and industrial environments.
基金Supported by National Key R&D Program of China(2019YFA0405400)。
文摘In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiation area is required for the extracted ion beams,which is crucial because it directly affects the experimental precision and therapeutic effect.Specifically,ultra-large-area and high-uniformity scanning are crucial requirements for spacecraft radiation effects assessment and serve as core specification for beamline terminal design.In the 300 MeV proton and heavy ion accelerator complex at the Space Environment Simulation and Research Infrastructure(SESRI),proton and heavy ion beams will be accelerated and ultimately delivered to three irradiation terminals.In order to achieve the required large irradiation area of 320 mm×320 mm,horizontal and vertical scanning magnets are used in the extraction beam line.However,considering the various requirements for beam species and energies,the tracking accuracy of power supplies(PSs),the eddy current effect of scanning magnets,and the fluctuation of ion bunch structure will reduce the irradiation uniformity.To mitigate these effects,a beam uniformity optimization method based on the measured beam distribution was proposed and applied in the accelerator complex at SESRI.In the experiment,the uniformity is successfully optimized from 75%to over 90%after five iterations of adjustment to the PS waveforms.In this paper,the method and experimental results were introduced.
基金This project was supported by the National Natural Science Foundation of China (60274007) NSERC-Canada.
文摘In the area of control theory the time-delay systems have been investigated. It's well known that delays often result in instability, therefore, stability analysis of time-delay systems is an important subject in control theory. As a result, many criteria for testing the stability of linear time-delay systems have been proposed. Significant progress has been made in the theory of impulsive systems and impulsive delay systems in recent years. However, the corresponding theory for uncertain impulsive systems and uncertain impulsive delay systems has not been fully developed. In this paper, robust stability criteria are established for uncertain linear delay impulsive systems by using Lyapunov function, Razumikhin techniques and the results obtained. Some examples are given to illustrate our theory.
基金supported by the National Natural Science Foundation of China(Grant No.22305123)。
文摘The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.
基金the China National Nature Science Foundation(Grant No.12102404)。
文摘A new robust bio-inspired route by using lysozyme aqueous solution for surface modification on 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)was described in this paper.HMX crystals were coated by in situ phase transition of lysozyme(PTL)molecules.The HMX decorated by PTL was characterized by SEM,XRD,FTIR and XPS,demonstrating a dense core-shell coating layer.The coverage of lysozyme on HMX crystal was calculated by the ratio of sulfur content.The surface coverage increased from 60.5% to 93.5% when the content of PTL was changed from 0.5 wt% to 2.0 wt%,indicating efficient coating.The thermal stability of HMX was investigated by in situ XRD and DSC.The thermal phase transition temperature of HMX(β to δ phase)was delayed by 42℃ with 2.0 wt% PTL coating,which prevented HMX from thermal damage and sensitivity by the effect of PTL coating.After heating at 215℃,large cracks appeared in the naked HMX crystal,while the PTL coated HMX still maintained intact,with the impact energy of HMX dropped dramatically from 5 J to 2 J.However,the impact energy of HMX with 1.0 wt% and 2.0 wt% coating content(HMX@PTL-1.0 and HMX@PTL-2.0)was unchanged(5 J).Present results potentially enable large-scale fabrication of polymorphic energetic materials with outstanding thermal stability by novel lysozyme coating.
文摘The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.
基金Project(2023YFC2907204)supported by the National Key Research and Development Program of ChinaProject(52325905)supported by the National Natural Science Foundation of ChinaProject(DJ-HXGG-2023-16)supported by the Key Technology Research Projects of Power China。
文摘Underground energy and resource development,deep underground energy storage and other projects involve the global stability of multiple interconnected cavern groups under internal and external dynamic disturbances.An evaluation method of the global stability coefficient of underground caverns based on static overload and dynamic overload was proposed.Firstly,the global failure criterion for caverns was defined based on its band connection of plastic-strain between multi-caverns.Then,overloading calculation of the boundary geostress and seismic intensity on the caverns model was carried out,and the critical unstable state of multi-caverns can be identified,if the plastic-strain band appeared between caverns during these overloading processes.Thus,the global stability coefficient for the multi-caverns under static loading and earthquake was obtained based on the corresponding overloading coefficient.Practical analysis for the Yingliangbao(YLB)hydraulic caverns indicated that this method can not only effectively obtain the global stability coefficient of caverns under static and dynamic earthquake conditions,but also identify the caverns’high-risk zone of local instability through localized plastic strain of surrounding rock.This study can provide some reference for the layout design and seismic optimization of underground cavern group.
