Figure 3 in the paper[Chin.Phys.B 34020701(2025)]contains an axis labeling error.The revised figure is provided.This modification does not affect the result presented in the paper.
Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we...Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.展开更多
The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber ...The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.展开更多
A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at ...A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.展开更多
In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was s...In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was studied.The effect of milling time on phase formation of sample powder was examined by X-ray diffraction technique(XRD).Moreover,the physical,dielectric,piezoelectric properties and microstructure of PZT ceramics were investigated.The present results reveal that the ultrasonic ball milling technique results the homogeneous and small size of PZT powder.Furthermore,there is a significantly change occurs in the size of the particles with the short time of milling process.展开更多
Based on impulse and vibration machining theories,a mathematical model of cutting force for the electroplated diamond ultrasonic wire saw was established using superposition principle.The differences between the cutti...Based on impulse and vibration machining theories,a mathematical model of cutting force for the electroplated diamond ultrasonic wire saw was established using superposition principle.The differences between the cutting forces with and without ultrasonic effect were analyzed theoretically and experimentally.The results indicate that the cutting force of diamond wire increases along with the spindle speed decrease and the lateral pressure increase.The force in ultrasonic vibration cutting is about 20% to 30% less than that in conventional cutting.Also,the cutting trajectory of single diamond grit in sawing process is simulated,and the reason that the ultrasonic vibration can reduce the cutting force is explained further.展开更多
The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the...The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the UEP system are investigated using a high-speed imaging technique(an ultra-high speed camera(NAC HX-6)and a long-distance microscope)in this work.The experiments demonstrate that there are a few partial emission modes,including left-side emission,double-side emission,and right-side emission,that are present in the droplet emission process of the UEP system.These modes are primarily caused by the partial formation of capillary standing waves(CSWs)on the emission surface of the ultrasonic nozzle.The emission rate for single-and double-sided emissions varies at different times,indicating that there are different CSWs engaged in droplet emission due to variations in the liquid film thickness and charge state of the liquid cones.Additionally,as the droplets emit continuously,a raised area on the emission surface appears,with several droplets emitting there as a result of charge accumulation.Additionally,photos of the CSWs with emitting droplets are obtained,which highlights the CSWs'distinctive wave morphology.展开更多
文摘Figure 3 in the paper[Chin.Phys.B 34020701(2025)]contains an axis labeling error.The revised figure is provided.This modification does not affect the result presented in the paper.
基金Project supported by the National Key R&D Program of China (Grant Nos. 2022YFA1602602 and 2023YFA1609600)the National Natural Science Foundation of China (Grant No. U23A20580)+3 种基金the open research fund of Songshan Lake Materials Laboratory (Grant No. 2022SLABFN27)Beijing National Laboratory for Condensed Matter Physics (Grant No. 2024BNLCMPKF004)Guangdong Basic and Applied Basic Research Foundation (Grant No. 2022B1515120020)the interdisciplinary program of Wuhan National High Magnetic Field Center at Huazhong University of Science and Technology (Grant No. WHMFC202132)。
文摘Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.
基金Standard system on forestry engineering of Ministry ofScience and Technology ( 2004DEA70900-1).
文摘The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.
基金supported by the Science Fund for Creative Research Groups(21421004)the National Basic Research 973 Program(2013CB733700)NSFC/China(21172073,21372082,21572062 and 91233207)
文摘A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.
文摘In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was studied.The effect of milling time on phase formation of sample powder was examined by X-ray diffraction technique(XRD).Moreover,the physical,dielectric,piezoelectric properties and microstructure of PZT ceramics were investigated.The present results reveal that the ultrasonic ball milling technique results the homogeneous and small size of PZT powder.Furthermore,there is a significantly change occurs in the size of the particles with the short time of milling process.
基金Sponsored by Liaoning Innovation Team Fundation(2008T164)
文摘Based on impulse and vibration machining theories,a mathematical model of cutting force for the electroplated diamond ultrasonic wire saw was established using superposition principle.The differences between the cutting forces with and without ultrasonic effect were analyzed theoretically and experimentally.The results indicate that the cutting force of diamond wire increases along with the spindle speed decrease and the lateral pressure increase.The force in ultrasonic vibration cutting is about 20% to 30% less than that in conventional cutting.Also,the cutting trajectory of single diamond grit in sawing process is simulated,and the reason that the ultrasonic vibration can reduce the cutting force is explained further.
基金supported by National Natural Science Foundation of China(No.12102099)the National Key R&D Program of China(No.2021YFC2202700)the Outstanding Academic Leader Project of Shanghai(Youth)(No.23XD1421700),respectively。
文摘The Ultrasonic Electric Propulsion(UEP)system is a cutting-edge propulsion technology that is mostly used on platforms for small satellites(less than 10 kg).The characteristics of droplet partial emissions(DPEs)in the UEP system are investigated using a high-speed imaging technique(an ultra-high speed camera(NAC HX-6)and a long-distance microscope)in this work.The experiments demonstrate that there are a few partial emission modes,including left-side emission,double-side emission,and right-side emission,that are present in the droplet emission process of the UEP system.These modes are primarily caused by the partial formation of capillary standing waves(CSWs)on the emission surface of the ultrasonic nozzle.The emission rate for single-and double-sided emissions varies at different times,indicating that there are different CSWs engaged in droplet emission due to variations in the liquid film thickness and charge state of the liquid cones.Additionally,as the droplets emit continuously,a raised area on the emission surface appears,with several droplets emitting there as a result of charge accumulation.Additionally,photos of the CSWs with emitting droplets are obtained,which highlights the CSWs'distinctive wave morphology.
