In this paper, we propose an ultra-wideband reflective linear cross-polarization converter based on anisotropic metasurface. Its unit cell is composed of a square-shaped resonator with intersectant diagonal and metall...In this paper, we propose an ultra-wideband reflective linear cross-polarization converter based on anisotropic metasurface. Its unit cell is composed of a square-shaped resonator with intersectant diagonal and metallic ground sheet separated by dielectric substrate. Simulated results show that the converter can generate resonances at four frequencies under normal incident electromagnetic（EM） wave, leading to the bandwidth expansion of cross-polarization reflection. For verification,the designed polarization converter is fabricated and measured. The measured and simulated results agree well with each other, showing that the fabricated converter can convert x- or y-polarized incident wave into its cross polarized wave in a frequency range from 7.57 GHz to 20.46 GHz with a relative bandwidth of 91.2%, and the polarization conversion efficiency is greater than 90%. The proposed polarization converter has a simple geometry but an ultra wideband compared with the published designs, and hence possesses potential applications in novel polarization-control devices.展开更多
An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic （EM） wave into the circular polarization in ultra-wideband. By...An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic （EM） wave into the circular polarization in ultra-wideband. By symmetrically employing two micro-splits on the horizontal arm （in the x direction） of the Jerusalem-cross structure, the bandwidth of the proposed device is significantly extended. Both simulated and experimental results show that the proposed metasurface is able to convert linearly polarized waves into circularly polarized waves in a frequency range from 12.4 GHz to 21 GHz, with an axis ratio better than 1 dB. The simulated results also show that such a broadband and high-performance are maintained over a wide range of incident angle. The presented polarization converter can be used in a number of areas, such as spectroscopy and wireless communications.展开更多
We theoretically design a power-efficient ultra-wideband pulse generator by combining three monocycle pulses with different weights. We also experimentally demonstrate a feasible scheme to generate such power-efficien...We theoretically design a power-efficient ultra-wideband pulse generator by combining three monocycle pulses with different weights. We also experimentally demonstrate a feasible scheme to generate such power-efficient ultra-wideband waveforms using cross-phase modulation in a single semiconductor optical amplifier. The designed ultra-wideband pulse fully satisfies the requirements for the spectral mask specified by the Federal Communications Commission with high power efficiency. In the experiment, a power-efficient ultra-wideband waveform with a pulse duration of 310 ps is achieved, and the power efficiency is greatly improved compared with that of a single nlonocycle pulse or a mixture of two monoeycles.展开更多
A rate adaptive multi-band ultra-wideband (UWB) system based on the quadrature fractal modulation (QFM) scheme was proposed.Exploring the use of homogeneous signals as modulating waveforms in UWB system,the signal wit...A rate adaptive multi-band ultra-wideband (UWB) system based on the quadrature fractal modulation (QFM) scheme was proposed.Exploring the use of homogeneous signals as modulating waveforms in UWB system,the signal within each 528MHz sub-band was divided into 8 different frequency bandwidths using wavelets transform and these data sequences to be transmitted were embedded into homogeneous waveforms.It is found that the use of homogeneous signals in such UWB system is quite feasible,leadings to a novel multi-rate diversity strategy.Within each 528MHz sub-band,the UWB-QFM system can provide much higher data rates than that of the UWB orthogonal frequency division multiplexing (OFDM) system.Simulation results also show that the bit error rate (BER) performance of the UWB-QFM system achieves a greatly improvement over existing UWB-OFDM system.Due to the fractal properties of the homogeneous signals,these data sequences to be transmitted can be recovered using arbitrarily short receiver signal.展开更多
A plasma-based stable,ultra-wideband electromagnetic（EM） wave absorber structure is studied in this paper for stealth applications.The stability is maintained by a multi-layer structure with several plasma layers an...A plasma-based stable,ultra-wideband electromagnetic（EM） wave absorber structure is studied in this paper for stealth applications.The stability is maintained by a multi-layer structure with several plasma layers and dielectric layers distributed alternately.The plasma in each plasma layer is designed to be uniform,whereas it has a discrete nonuniform distribution from the overall view of the structure.The nonuniform distribution of the plasma is the key to obtaining ultra-wideband wave absorption.A discrete Epstein distribution model is put forward to constrain the nonuniform electron density of the plasma layers,by which the wave absorption range is extended to the ultra-wideband.Then,the scattering matrix method（SMM） is employed to analyze the electromagnetic reflection and absorption of the absorber structure.In the simulation,the validation of the proposed structure and model in ultra-wideband EM wave absorption is first illustrated by comparing the nonuniform plasma model with the uniform case.Then,the influence of various parameters on the EM wave reflection of the plasma are simulated and analyzed in detail,verifying the EM wave absorption performance of the absorber.The proposed structure and model are expected to be superior in some realistic applications,such as supersonic aircraft.展开更多
Using the wire construction technique, a conical monopole antenna is fabricated. With the method of moments, the dependences of the voltage standing wave ratio （VSWR） on the number of the trapezoid wire elements, co...Using the wire construction technique, a conical monopole antenna is fabricated. With the method of moments, the dependences of the voltage standing wave ratio （VSWR） on the number of the trapezoid wire elements, conical angles, wire radius, etc. are investigated. The calculation and the experiment show that the designed wire conical antenna has the ultra-wideband property and can be used for the engineering.展开更多
A simple and compact microstrip-fed ultra wideband （UWB） printed monopole antenna is presented. The antenna is composed of a circular radiator and a finitely grounded plane. The antenna occupies about 16.62 GHz abso...A simple and compact microstrip-fed ultra wideband （UWB） printed monopole antenna is presented. The antenna is composed of a circular radiator and a finitely grounded plane. The antenna occupies about 16.62 GHz absolute bandwidth and 142.7% relative bandwidth covering from 3.38 GHz to 20 GHz with voltage standing wave ratio （VSWR） below two. A quasi-omnidirectional and quasi-symmetrical radiation pattern in H plane is obtained in the whole bandwidth. The high performance of the antenna is validated with measured and simulated results given. The antenna can be applied for the system design of UWB wireless communication.展开更多
In this paper, we present the design of multilayer microwave absorbers comprised of Co Fe alloy nano-particles and nano-flakes as fillers. The thickness of the unite layer is optimized by using the Genetic Algorithm. ...In this paper, we present the design of multilayer microwave absorbers comprised of Co Fe alloy nano-particles and nano-flakes as fillers. The thickness of the unite layer is optimized by using the Genetic Algorithm. Efficient microwave absorptions over a wide frequency band and a range of incident angles are achieved by using multilayer absorbers. We show that the absorbers are effective not only for a planar surface but also for arbitrarily shaped objects as well.展开更多
A new kind of ultra wideband antenna,which consists of a leaf-like dipole and a dielectric block,is proposed and analyzed.The dielectric block is attached in parallel with the dipole near its feed point.Thus,the near ...A new kind of ultra wideband antenna,which consists of a leaf-like dipole and a dielectric block,is proposed and analyzed.The dielectric block is attached in parallel with the dipole near its feed point.Thus,the near field is attracted to the side where the dielectric block is located.It leads to a focusing effect of the energy in the far zone.The finite-difference time-domain(FDTD)method combined with the perfectly matched layers(PML)technique is used in the simulation of the antenna radiation characteristics.The research shows that,with proper dielectric loading and 50 Ω feeding line,the bandwidth of the antenna can be up to 6.5 GHz,from 3.5 GHz to 10 GHz with VSWR(voltage standing wave ratio)less than 2.5.展开更多
With the rapid development of smart phone,the location-based services(LBS)have received great attention in the past decades.Owing to the widespread use of WiFi and Bluetooth devices,Received Signal Strength Indication...With the rapid development of smart phone,the location-based services(LBS)have received great attention in the past decades.Owing to the widespread use of WiFi and Bluetooth devices,Received Signal Strength Indication(RSSI)fingerprintbased localization method has obtained much development in both academia and industries.In this work,we introduce an efficient way to reduce the labor-intensive site survey process,which uses an UWB/IMU-assisted fingerprint construction(UAFC)and localization framework based on the principle of Automatic radio map generation scheme(ARMGS)is proposed to replace the traditional manual measurement.To be specific,UWB devices are employed to estimate the coordinates when the collector is moved in a reference point(RP).An anchor self-localization method is investigated to further reduce manual measurement work in a wide and complex environment,which is also a grueling,time-consuming process that is lead to artificial errors.Moreover,the measurements of IMU are incorporated into the UWB localization algorithm and improve the label accuracy in fingerprint.In addition,the weighted k-nearest neighbor(WKNN)algorithm is applied to online localization phase.Finally,filed experiments are carried out and the results confirm the effectiveness of the proposed approach.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.61471387,61271250,and 61571460)
文摘In this paper, we propose an ultra-wideband reflective linear cross-polarization converter based on anisotropic metasurface. Its unit cell is composed of a square-shaped resonator with intersectant diagonal and metallic ground sheet separated by dielectric substrate. Simulated results show that the converter can generate resonances at four frequencies under normal incident electromagnetic（EM） wave, leading to the bandwidth expansion of cross-polarization reflection. For verification,the designed polarization converter is fabricated and measured. The measured and simulated results agree well with each other, showing that the fabricated converter can convert x- or y-polarized incident wave into its cross polarized wave in a frequency range from 7.57 GHz to 20.46 GHz with a relative bandwidth of 91.2%, and the polarization conversion efficiency is greater than 90%. The proposed polarization converter has a simple geometry but an ultra wideband compared with the published designs, and hence possesses potential applications in novel polarization-control devices.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61461016 and 61661012)the Natural Science Foundation of Guangxi Zhuang Autonomous Region,China(Grant Nos.2014GXNSFAA118366,2014GXNSFAA118283,and 2015jj BB7002)the Innovation Project of Graduate Education of Guilin University of Electronic Technology,China(Grant No.2016YJCX82)
文摘An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic （EM） wave into the circular polarization in ultra-wideband. By symmetrically employing two micro-splits on the horizontal arm （in the x direction） of the Jerusalem-cross structure, the bandwidth of the proposed device is significantly extended. Both simulated and experimental results show that the proposed metasurface is able to convert linearly polarized waves into circularly polarized waves in a frequency range from 12.4 GHz to 21 GHz, with an axis ratio better than 1 dB. The simulated results also show that such a broadband and high-performance are maintained over a wide range of incident angle. The presented polarization converter can be used in a number of areas, such as spectroscopy and wireless communications.
基金supported by the National Basic Research Program of China (Grant No. 2011CB301704)the National Natural Science Foundation of China (Grant No. 60901006)the Fundamental Research Funds for the Central Universities of China (Grant No. 2010QN033)
文摘We theoretically design a power-efficient ultra-wideband pulse generator by combining three monocycle pulses with different weights. We also experimentally demonstrate a feasible scheme to generate such power-efficient ultra-wideband waveforms using cross-phase modulation in a single semiconductor optical amplifier. The designed ultra-wideband pulse fully satisfies the requirements for the spectral mask specified by the Federal Communications Commission with high power efficiency. In the experiment, a power-efficient ultra-wideband waveform with a pulse duration of 310 ps is achieved, and the power efficiency is greatly improved compared with that of a single nlonocycle pulse or a mixture of two monoeycles.
基金National Natural Science Fund of China(60372097), Beijing Municipal Natural Science Fund(4052021),University IT Research Center Project(INHA UWB-ITRC)Korea, KDDI R&D Labs Co-Project, Japan.
文摘A rate adaptive multi-band ultra-wideband (UWB) system based on the quadrature fractal modulation (QFM) scheme was proposed.Exploring the use of homogeneous signals as modulating waveforms in UWB system,the signal within each 528MHz sub-band was divided into 8 different frequency bandwidths using wavelets transform and these data sequences to be transmitted were embedded into homogeneous waveforms.It is found that the use of homogeneous signals in such UWB system is quite feasible,leadings to a novel multi-rate diversity strategy.Within each 528MHz sub-band,the UWB-QFM system can provide much higher data rates than that of the UWB orthogonal frequency division multiplexing (OFDM) system.Simulation results also show that the bit error rate (BER) performance of the UWB-QFM system achieves a greatly improvement over existing UWB-OFDM system.Due to the fractal properties of the homogeneous signals,these data sequences to be transmitted can be recovered using arbitrarily short receiver signal.
基金supported in part by the National Basic Research Program of China (grant no.2014CB340205)in part by the Science and Technology on Space Physics Laboratory Fundsin part by the Fundamental Research Funds for the Central Universities (20101156180)
文摘A plasma-based stable,ultra-wideband electromagnetic（EM） wave absorber structure is studied in this paper for stealth applications.The stability is maintained by a multi-layer structure with several plasma layers and dielectric layers distributed alternately.The plasma in each plasma layer is designed to be uniform,whereas it has a discrete nonuniform distribution from the overall view of the structure.The nonuniform distribution of the plasma is the key to obtaining ultra-wideband wave absorption.A discrete Epstein distribution model is put forward to constrain the nonuniform electron density of the plasma layers,by which the wave absorption range is extended to the ultra-wideband.Then,the scattering matrix method（SMM） is employed to analyze the electromagnetic reflection and absorption of the absorber structure.In the simulation,the validation of the proposed structure and model in ultra-wideband EM wave absorption is first illustrated by comparing the nonuniform plasma model with the uniform case.Then,the influence of various parameters on the EM wave reflection of the plasma are simulated and analyzed in detail,verifying the EM wave absorption performance of the absorber.The proposed structure and model are expected to be superior in some realistic applications,such as supersonic aircraft.
基金the Natural Science Foundation Program of the Department of Education of Jiangsu Province (No. 05KJD510248)
文摘Using the wire construction technique, a conical monopole antenna is fabricated. With the method of moments, the dependences of the voltage standing wave ratio （VSWR） on the number of the trapezoid wire elements, conical angles, wire radius, etc. are investigated. The calculation and the experiment show that the designed wire conical antenna has the ultra-wideband property and can be used for the engineering.
文摘A simple and compact microstrip-fed ultra wideband （UWB） printed monopole antenna is presented. The antenna is composed of a circular radiator and a finitely grounded plane. The antenna occupies about 16.62 GHz absolute bandwidth and 142.7% relative bandwidth covering from 3.38 GHz to 20 GHz with voltage standing wave ratio （VSWR） below two. A quasi-omnidirectional and quasi-symmetrical radiation pattern in H plane is obtained in the whole bandwidth. The high performance of the antenna is validated with measured and simulated results given. The antenna can be applied for the system design of UWB wireless communication.
文摘In this paper, we present the design of multilayer microwave absorbers comprised of Co Fe alloy nano-particles and nano-flakes as fillers. The thickness of the unite layer is optimized by using the Genetic Algorithm. Efficient microwave absorptions over a wide frequency band and a range of incident angles are achieved by using multilayer absorbers. We show that the absorbers are effective not only for a planar surface but also for arbitrarily shaped objects as well.
基金Sponsored by National Nature Science Foundation of China(60471053)the Program for New Century Excellent Talents in University of MOE,China
文摘A new kind of ultra wideband antenna,which consists of a leaf-like dipole and a dielectric block,is proposed and analyzed.The dielectric block is attached in parallel with the dipole near its feed point.Thus,the near field is attracted to the side where the dielectric block is located.It leads to a focusing effect of the energy in the far zone.The finite-difference time-domain(FDTD)method combined with the perfectly matched layers(PML)technique is used in the simulation of the antenna radiation characteristics.The research shows that,with proper dielectric loading and 50 Ω feeding line,the bandwidth of the antenna can be up to 6.5 GHz,from 3.5 GHz to 10 GHz with VSWR(voltage standing wave ratio)less than 2.5.
文摘With the rapid development of smart phone,the location-based services(LBS)have received great attention in the past decades.Owing to the widespread use of WiFi and Bluetooth devices,Received Signal Strength Indication(RSSI)fingerprintbased localization method has obtained much development in both academia and industries.In this work,we introduce an efficient way to reduce the labor-intensive site survey process,which uses an UWB/IMU-assisted fingerprint construction(UAFC)and localization framework based on the principle of Automatic radio map generation scheme(ARMGS)is proposed to replace the traditional manual measurement.To be specific,UWB devices are employed to estimate the coordinates when the collector is moved in a reference point(RP).An anchor self-localization method is investigated to further reduce manual measurement work in a wide and complex environment,which is also a grueling,time-consuming process that is lead to artificial errors.Moreover,the measurements of IMU are incorporated into the UWB localization algorithm and improve the label accuracy in fingerprint.In addition,the weighted k-nearest neighbor(WKNN)algorithm is applied to online localization phase.Finally,filed experiments are carried out and the results confirm the effectiveness of the proposed approach.
