在两级式AC-DC变换器中,前级功率因数校正(power factor correction,PFC)固有的瞬时功率波动特性会造成母线电压存在二倍频纹波,影响后级CLLLC谐振变换器的输出电压质量。针对以上问题,该文提出了基于二阶广义积分(second order general...在两级式AC-DC变换器中,前级功率因数校正(power factor correction,PFC)固有的瞬时功率波动特性会造成母线电压存在二倍频纹波,影响后级CLLLC谐振变换器的输出电压质量。针对以上问题,该文提出了基于二阶广义积分(second order generalized integral,SOGI)的可变增益母线电压纹波前馈控制方法。采用SOGI提取母线电压纹波信息,基于品质因数Q与电压增益的关系和母线电压纹波对归一化频率的影响,解析了母线电压纹波对CLLLC谐振变换器输出电压的影响机理,得到Q值与前馈增益系数Ka的关系,采用仿真寻优加数据拟合的方法得到前馈可变增益系数曲线。仿真和实验结果表明,相比于无前馈控制,所提控制方法对CLLLC谐振变换器的输出电压纹波具有较好的抑制效果,输出电压纹波降低了72%,验证了所提算法的有效性。展开更多
Dimmers are very widely applied in theatres,cinemas,dancing-parties, auditoriums and signal systems.They are usually supplied by single-stage AC/AC converters in the past with voltage regulation technique with the dis...Dimmers are very widely applied in theatres,cinemas,dancing-parties, auditoriums and signal systems.They are usually supplied by single-stage AC/AC converters in the past with voltage regulation technique with the disadvantages of high total harmonic distortion,low power factor and poor power transfer efficiency.This paper introduces a novel method-DC-modulation that implements DC/DC conversion technology into AC/AC converters.The DC-modulated single-stage PFC AC/AC converters effectively improved the power factor up to 0.999 and the power transfer efficiency up to 97.8 %.The experimental results verified our design and calculation.This technique will be widely used in light dimming and other industrial applications.展开更多
文摘Dimmers are very widely applied in theatres,cinemas,dancing-parties, auditoriums and signal systems.They are usually supplied by single-stage AC/AC converters in the past with voltage regulation technique with the disadvantages of high total harmonic distortion,low power factor and poor power transfer efficiency.This paper introduces a novel method-DC-modulation that implements DC/DC conversion technology into AC/AC converters.The DC-modulated single-stage PFC AC/AC converters effectively improved the power factor up to 0.999 and the power transfer efficiency up to 97.8 %.The experimental results verified our design and calculation.This technique will be widely used in light dimming and other industrial applications.
