The maneuverability and stealth of aerial-aquatic vehicles(AAVs)is of significant importance for future integrated air-sea combat missions.To improve the maneuverability and stealth of AAVs near the water surface,this...The maneuverability and stealth of aerial-aquatic vehicles(AAVs)is of significant importance for future integrated air-sea combat missions.To improve the maneuverability and stealth of AAVs near the water surface,this paper proposed a high-maneuverability skipping motion strategy for the tandem twin-rotor AAV,inspired by the motion behavior of the flying fish to avoid aquatic and aerial predators near the water surface.The novel tandem twin-rotor AAV was employed as the research subject and a strategybased ADRC control method for validation,comparing it with a strategy-based PID control method.The results indicate that both control methods enable the designed AAV to achieve high stealth and maneuverability near the water surface with robust control stability.The strategy-based ADRC control method exhibits a certain advantage in controlling height,pitch angle,and reducing impact force.This motion strategy will offer an inspiring approach for the practical application of AAVs to some extent.展开更多
Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while exte...Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.展开更多
The Changsha-Xiangtan-Zhuzhou City Group is a heavy industrial district and accepted as the serious pollution area in the Xiangjiang River basin.In this study,7 metals(Pb,Hg,Cd,As,Zn,Cu and Se)and the river water qual...The Changsha-Xiangtan-Zhuzhou City Group is a heavy industrial district and accepted as the serious pollution area in the Xiangjiang River basin.In this study,7 metals(Pb,Hg,Cd,As,Zn,Cu and Se)and the river water quality parameters including pH,dissolved oxygen(DO),Escherichia coli(E.coli),potassium permanganate index(CODMn),dichromate oxidizability(CODCr),five-day biochemical oxygen demand(BOD5),ammonia nitrogen(NH4+-N),total nitrogen(TN),total phosphorus(TP)and fluoride(F)in 18 sampling sites of the Changsha-Xiangtan-Zhuzhou section are monthly monitored in 2016,which is the year to step into the second stage of the“Xiangjiang River Heavy Metal Pollution Control Implementation Plan”.It is found that E.coli,TN and TP are the main pollutants in the Changsha-Zhuzhou-Xiangtan section,and the pollution of heavy metal is not serious but As with potential risk to local people especially children should be concerned.In addition,Xiangtan city is mainly featured with heavy metal pollution,while Zhuzhou and Changsha city are both featured with other pollutants from municipal domestic sewage.展开更多
Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture...Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.展开更多
Sixteen priority polycyclic aromatic hydrocarbons(PAHs) in surface water samples were analyzed by gas chromatograph-mass spectrometer(GC-MS) to study their distribution and characterizing sources.The water samples wer...Sixteen priority polycyclic aromatic hydrocarbons(PAHs) in surface water samples were analyzed by gas chromatograph-mass spectrometer(GC-MS) to study their distribution and characterizing sources.The water samples were collected from five sites(J1-J5) in the Jialing River of Chongqing downtown area from September 2009 to August 2010.The results demonstrate that the concentration of total PAHs in three samples upstream are relatively higher than those in other two sites downstream,with average concentration of total PAHs for each site ranging from 811.5 ng/L to 1585.8 ng/L.The 2,3 and 4-ring PAHs for sampling stations account for 13.0%,56.6% and 28.6%,respectively,in total PAHs.There are obvious tendencies of seasonal change for PAHs concentration in surface water.The PAHs concentration in April of wet season is 1 301.6 ng/L,which is 1.3 times the lowest amount of total PAHs in August of flood season.Ratios of specific PAH compounds were used to characterize the possible pollution sources.Experimental results indicate that the PAHs in surface water samples are primarily from pyrolytic PAHs because of factories along these sites,while the direct leakage of petroleum products may be significant for two sites,Jiahua Bridge(J4) and Huanghuayuan Bridge(J5),because of the wharf boat nearby.展开更多
Most of China's wetland areas are located in Sanjiang Plain (Three River Basin). It's area has 207×104 hm2 of wet and low-lying farmland, of which 59% is cropped. During 1970s and 1980s, the Chinese gover...Most of China's wetland areas are located in Sanjiang Plain (Three River Basin). It's area has 207×104 hm2 of wet and low-lying farmland, of which 59% is cropped. During 1970s and 1980s, the Chinese government organized intensive scientific research into potential changes to existing natural resources conditions for this farmland. The aim was to make the water resources regime beneficial to crop production. Arterial drainage, field drainage and appropriate sub-soil treatments were suggested. The Four Waters converting mechanism and the estimation of the Four Water converting amount in wet and low-lying farmland were discussed in the paper.展开更多
Most of China's wetland areas are located in the Sanjiang Plain.This area has 207×10 4 hm 2 of wet and low lying farmland,of which 59% is cropped.During the 1970s and 1980s,the Chinese government organize...Most of China's wetland areas are located in the Sanjiang Plain.This area has 207×10 4 hm 2 of wet and low lying farmland,of which 59% is cropped.During the 1970s and 1980s,the Chinese government organized intensive scientific research into potential changes to existing natural resources conditions for these farmlands.The aim was to change the water resources regime to one that was beneficial to crop production.Arterial drainage,field drainage and appropriate sub soil treatments were required.The relation between plant products industry and the Four Waters distribution,also the main measures of the Four Waters converting in wet and low lying farmland were discussed in the paper.展开更多
Groundwater is an important water resource in Haihe River basin,North China.The number of aquifers that appear to be declining under conditions of groundwater overdraft is increasing.To effectively manage the water re...Groundwater is an important water resource in Haihe River basin,North China.The number of aquifers that appear to be declining under conditions of groundwater overdraft is increasing.To effectively manage the water resources,there is a strong scientific need to analyze the net use of this important water resource and to quantify the water rights allocation for improved understanding of the future water展开更多
Improving crop water productivity is necessary for ensuring food security. To quantify the water utilization in grain production from multiple perspectives, gross inflow water productivity(WPg), generalized agricultur...Improving crop water productivity is necessary for ensuring food security. To quantify the water utilization in grain production from multiple perspectives, gross inflow water productivity(WPg), generalized agricultural water productivity(WPa), evapotranspiration water productivity(WPET) and irrigation water productivity(WPI) were examined in this study. This paper calculated and analyzed the temporal and spatial variation in these water productivity(WP) indices in the irrigated land of Heilongjiang Province. The results showed that almost all of the municipal WP indices increased from 2007 to 2015. The four indices showed large differences in scientific connotation and numerical performance, and their degrees of spatial variation were ranked as WPI>WPa>WPg>WPET. The spatial patterns of WP indices in different years were similar; the central and southern regions on the Songnen Plain and the eastern region had high WP values, while those of the northern region were low. Each WP index was used to evaluate the relationship between the input of water resources and the output of grain between different regions. Most cities had the potential to improve WP by reducing the input of irrigation water. Furthermore, the results provided recommendations to decision makers to plan for efficient use of water resources in different cities.展开更多
Different irrigation schemes have different effects on water consumption in rice production.However,few studies have been conducted on the water consumption processes between dry direct seeding rice and transplanting ...Different irrigation schemes have different effects on water consumption in rice production.However,few studies have been conducted on the water consumption processes between dry direct seeding rice and transplanting rice under different irrigation schemes.Water consumption process,water use efficiency and correlation effect of water consumption on yield under different planting models in rice production were investigated in northeast China in 2018.Seven treatments were implemented:drip irrigation dry direct seeding rice(DDSR),wet irrigation dry direct seeding rice(WDSR),flooded irrigation dry direct seeding rice(FDSR),transplanting flooded rice(TFR),controlled irrigation transplanting rice(CTR),intermittent irrigation transplanting rice(ITR)and wet irrigation transplanting rice(WTR).Among them,TFR was the control.The results showed that the peaks of the water consumption amount,intensity and its modulus coefficient of the seven treatments all appeared in the middle tillering and the jointing booting stages.The total water consumption amount(ET)and average water consumption intensity of DDSR,WDSR,FDSR and WTR were lower than those of TFR,CTR and ITR.The maximum water use efficiency of yield(WUEy)occurred in DDSR with a value of 3.8 kg·m^(-3).WUEy of DDSR,WDSR and FDSR were significantly higher than those of TFR,CTR and ITR.In the middle tillering and the heading and flowering stages,the water consumption amount of each treatment had a positive effect on yield formation,and the water consumption amount in the late tillering stage had a negative effect on yield formation.The relationship between ET and yield(Y)of dry direct seeding and transplanting planting models showed a quadratic function curve.ET of transplanting planting model had a significant positive impact on Y,and ET of dry direct seeding planting model had no impact on Y.DDSR had the least total water consumption of 199.8 mm·m^(-2),the lowest water consumption intensity of 2.0 mm·d^(-1) and the greatest water use efficiency of 3.8 kg·m^(-3),which suggested that DDSR had the most significant water saving effect.The combination of dry direct seeding planting model and drip irrigation scheme would be a good option for determining a water-saving rice planting model in northeast China.展开更多
The carbon fiber reinforced composite is a new type of composite material with an excellent property in strength and elastic modulus,and has found extensive applications in aerospace,energy,automotive industry and so ...The carbon fiber reinforced composite is a new type of composite material with an excellent property in strength and elastic modulus,and has found extensive applications in aerospace,energy,automotive industry and so on.However,this composite has a strict requirement on processing techniques,for example,brittle damage or delamination often exists in conventional processing techniques.Abrasive water jet machining technology is a new type of green machining technique with distinct advantages such as high-energy and thermal distortion free.The use of abrasive water jet technique to process carbon fiber composite materials has become a popular trend since it can significantly improve the processing accuracy and surface quality of carbon fiber composite materials.However,there are too many parameters that affect the quality of an abrasive water jet machining.At present,few studies are carried out on the parameter optimization of such a machining process,which leads to the unstable quality of surface processing.In this paper,orthogonal design of experiment and regression analysis were employed to establish the empirical model between cutting surface roughness and machining process parameters.Then a verified model was used to optimize the machining process parameters for abrasive water jet cutting carbon fiber reinforced composites.展开更多
Strontium has four naturally occurring stable isotopes,84Sr,86Sr,87Sr,and 88Sr,with abundances of 0.56,9.87,approximately 7.04,and 82.53 atomic %,respectively.The 87Sr/86Sr isotope ratio is variable due to the additio...Strontium has four naturally occurring stable isotopes,84Sr,86Sr,87Sr,and 88Sr,with abundances of 0.56,9.87,approximately 7.04,and 82.53 atomic %,respectively.The 87Sr/86Sr isotope ratio is variable due to the addition of radiogenic 87Sr produced by the beta decay of 87Rb with a half-life of 4.88 ± 0.05 Ga.Thus,展开更多
Bacterial and chemical contaminations of drinking water imperil the health of people.A reactive species injection method is presented for sterilizing drinking water.To produce reactive species,a gas phase surface disc...Bacterial and chemical contaminations of drinking water imperil the health of people.A reactive species injection method is presented for sterilizing drinking water.To produce reactive species,a gas phase surface discharge reactor(SDR)is designed:a spiral stainless steel wire attached on the inside wall of a quartz glass tube is used as the high voltage electrode,and the drinking water is the ground electrode.The performance and mechanisms of the method in inactivating of Escherichia coli(E.coli)are analyzed.Experimental results show that 500 mL E.coli-contaminated drinking water(108CFU/mL)is completely sterilized within 4 min.Based on the scanning electron microscope(SEM)analysis,there were plasma-induced cell structure damages of the E.coli in the sterilized water,and the damage resulted in the leakage of protein,which was proved by chemical analyses.Meanwhile,the heating effect concomitantly generated by discharge plasma does not influence E.coli inactivation,and the contribution of direct ultraviolet(UV)irradiation could be neglected too.The ozone generated by SDR and the hydroxyl radicals(·OH)subsequently generated in drinking water play the decisive roles in E.coli inactivation because these reactive species cause the cell rupture.展开更多
Based on a detailed environmental investigation of the whole Qingshui Stream catchments,samples of water and surface sediments were collected at 15 different places from the upper to the lower reaches of Qingshui Stre...Based on a detailed environmental investigation of the whole Qingshui Stream catchments,samples of water and surface sediments were collected at 15 different places from the upper to the lower reaches of Qingshui Stream,and samples of suspended matter were obtained by filtrating the water samples. The concentrations of heavy metals (Cd,Cu and Zn) were measured in filtered water,suspended matter,and surface sediment by ICP-AES. The results show that the concentrations of the three heavy metals in filtered water are 0.18,6.6 and 17.67 μg/L,lower than that of the Fresh Water Quality Criteria (US EPA) and those of the plain urban rivers,but the contents of Cd,Cu and Zn are much higher than the mean values of rivers in the world and the background value in Jialing River basin. The heavy metals concentrations in the suspended matter from Qingshui Stream are 2.08,438.14 and 1 348.05 mg/kg,much higher than the corresponding background values of soils in Chongqing city. The heavy metals concentrations in the surface sediment from Qingshui Stream are 0.84,189.75 and 838.23 mg/kg,and the values of index of geoaccumulation Igeo of Cd,Cu and Zn show that their pollution degrees are moderate. The heavy metals exist in three transferable forms such as water,suspended matter and surface sediment in Qingshui Stream. The heavy metals concentrations in water are the lowest,and those in the suspended matter are the highest,so the ecological risk in suspended matter is the highest. The distribution tendencies of three metals in water,suspended matter and surface sediment in main riverbed are different.展开更多
The purpose of this research was to better understand the water quality status of the Xiangjiang River, China, and to evaluate the risks posed by the river water. Precisely, ten water quality parameters including p H,...The purpose of this research was to better understand the water quality status of the Xiangjiang River, China, and to evaluate the risks posed by the river water. Precisely, ten water quality parameters including p H, dissolved oxygen(DO), Escherichia coli(E. coli), potassium permanganate index(CODMn), dichromate oxidizability(CODCr), five-day biochemical oxygen demand(BOD5), ammonia nitrogen(NH4+-N), total phosphorus(TP) and fluoride(F-) as well as metal(loid)s(Pb, Hg, Cd, As, Zn, Cu and Se) were monitored monthly in 2016 at 12 sampling sites throughout the Hengyang section of the Xiangjiang River. Concentrations of all parameters were presented according to rainy and dry seasons. They were compared with Chinese surface water standards and WHO drinking water limits to assess the sustainability of the river water status. Principal component analysis(PCA) revealed different pollution sources in different seasons. Dual hierarchical cluster analysis(DHCA) was applied to further classify the water quality variables and sampling sites. Besides, a risk assessment was introduced to evaluate the carcinogenic and non-carcinogenic concerns of heavy metal(loid)s to human health. This research will help to optimize water monitoring locations and establish pollution reduction strategies on the preservation of public safety.展开更多
Six-year old apple trees were selected for field experiment.The objective of this study was to obtain the reasonable arrangement of surge-root irrigation emitters in apple orchards.There were three factors:the buried ...Six-year old apple trees were selected for field experiment.The objective of this study was to obtain the reasonable arrangement of surge-root irrigation emitters in apple orchards.There were three factors:the buried depth H(25,40,55 cm),the horizontal distance L(30,40,60 cm)between the emitters and the trunk of the experimental tree,and the number of the irrigation emitters N(1,2,4).The effect of the arrangement of surge-root irrigation emitters on the growth,yield and irrigation water use efficiency(IWUE)of apple trees were studied in Northern Shaanxi where the irrigation quota takes 60%-75%of the field water capacity.The results showed that the arrangement of emitters for surge-root irrigation had a significant effect on apple tree yield and IWUE,especially,the yield and IWUE reached 28388.17 kg/hm2 and 16.83 kg/m3 in treatment T3,respectively.At the same L and N levels(T1,T2,and T3),the yield and IWUE in treatment T3 were the highest,and the yields in treatments T1 and T2 were decreased by 26.22%and 31.48%,while IWUE is reduced by14.02%and 18.12%compared with T3,respectively.At the same H and N levels(T3,T4,and T5),the yield and IWUE of apple trees were decreased with increasing L level.Especially,when L was 30 cm(T3),the yield and IWUE were the highest.The same L and H levels(T3,T6,and T7)could promote the growth of apple trees when N was 2(T3).Compared with treatment T3,it was found that the increment of new shoots was decreased by 8.07%-18.71%,and the fruit diameter was decreased by 5.41%-9.11%.Therefore,two emitters should be arranged symmetrically on both sides of an apple tree,each was buried at a 40 cm depth and 30 cm away from the trunk of the tree to effectively improve the yield and IWUE of the apple tree in mountainous areas in Northern Shaanxi.展开更多
At jet pressures ranging from 80 to 120 MPa, submerged water jets are investigated by numerical simulation and experiment. Numerical simulation enables a systematic analysis of major flow parameters such as jet veloci...At jet pressures ranging from 80 to 120 MPa, submerged water jets are investigated by numerical simulation and experiment. Numerical simulation enables a systematic analysis of major flow parameters such as jet velocity, turbulent kinetic energy as well as void fraction of cavitation. Experiments facilitate an objective assessment of surface morphology, micro hardness and surface roughness of the impinged samples. A comparison is implemented between submerged and non-submerged water jets. The results show that submerged water jet is characterized by low velocity magnitudes relative to non-submerged water jet at the same jet pressure. Shear effect serves as a key factor underlying the inception of cavitation in submerged water jet stream. Predicted annular shape of cavity zone is substantiated by local height distributions associated with experimentally obtained footprints. As jet pressure increases, joint contribution of jet kinetic energy and cavitation is demonstrated. While for non-submerged water jet, impingement force stems exclusively from flow velocity.展开更多
Based on the hazard development mechanism, a water solution area is closely related to the supporting effect of pressure-bearing water, the relaxing and collapsing effect of orebody interlayer, the collapsing effect o...Based on the hazard development mechanism, a water solution area is closely related to the supporting effect of pressure-bearing water, the relaxing and collapsing effect of orebody interlayer, the collapsing effect of thawless material in orebody, filling effect caused by cubical expansibility of hydrate crystallization and uplifting effect of hard rock layer over cranny belt. The movement and deformation of ground surface caused by underground water solution mining is believed to be much weaker than that caused by well lane mining, which can be predicted by the stochastic medium theory method. On the basis of analysis on the engineering practice of water solution mining, its corresponding parameters can be obtained from the in-site data of the belt water and sand filling mining in engineering analog approach.展开更多
Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The expe...Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The experimental results show that with the increase of adding additional water use,the compressive strength and splitting tensile strength of recycled coarse aggregate concrete decrease,but that of recycled fine aggregate concrete and recycled all aggregate concrete increase firstly then decrease.When additional water use is added more 15% or 20% than that of basic ordinary concrete,the recycled coarse aggregate concrete and fine one can get pretty good fluidity.When it is added more 30%,the recycled all aggregate concrete has fluidity that is just satisfied.展开更多
The laws of water consumption in corn,peanuts and millet on the semi-drought area of western Liaoning Province were studied through the FAO-Penman Monteith method and the water balance method.Among three corps,the amo...The laws of water consumption in corn,peanuts and millet on the semi-drought area of western Liaoning Province were studied through the FAO-Penman Monteith method and the water balance method.Among three corps,the amount of the day water demand,the whole growth period water demand and the soil water deficit of corn were all the largest.At the same time,its degree of agreement between the water demand and the level of precipitation was the worst,and its average in crop coefficient was larger.The amount of th...展开更多
基金supported by Southern Marine Science and Guangdong Laboratory(Zhuhai)(Grant No.SML2023SP229)。
文摘The maneuverability and stealth of aerial-aquatic vehicles(AAVs)is of significant importance for future integrated air-sea combat missions.To improve the maneuverability and stealth of AAVs near the water surface,this paper proposed a high-maneuverability skipping motion strategy for the tandem twin-rotor AAV,inspired by the motion behavior of the flying fish to avoid aquatic and aerial predators near the water surface.The novel tandem twin-rotor AAV was employed as the research subject and a strategybased ADRC control method for validation,comparing it with a strategy-based PID control method.The results indicate that both control methods enable the designed AAV to achieve high stealth and maneuverability near the water surface with robust control stability.The strategy-based ADRC control method exhibits a certain advantage in controlling height,pitch angle,and reducing impact force.This motion strategy will offer an inspiring approach for the practical application of AAVs to some extent.
文摘Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.
基金Projects(2018YFC1903301,2018YFC1801805)supported by the National Key R&D Program of China
文摘The Changsha-Xiangtan-Zhuzhou City Group is a heavy industrial district and accepted as the serious pollution area in the Xiangjiang River basin.In this study,7 metals(Pb,Hg,Cd,As,Zn,Cu and Se)and the river water quality parameters including pH,dissolved oxygen(DO),Escherichia coli(E.coli),potassium permanganate index(CODMn),dichromate oxidizability(CODCr),five-day biochemical oxygen demand(BOD5),ammonia nitrogen(NH4+-N),total nitrogen(TN),total phosphorus(TP)and fluoride(F)in 18 sampling sites of the Changsha-Xiangtan-Zhuzhou section are monthly monitored in 2016,which is the year to step into the second stage of the“Xiangjiang River Heavy Metal Pollution Control Implementation Plan”.It is found that E.coli,TN and TP are the main pollutants in the Changsha-Zhuzhou-Xiangtan section,and the pollution of heavy metal is not serious but As with potential risk to local people especially children should be concerned.In addition,Xiangtan city is mainly featured with heavy metal pollution,while Zhuzhou and Changsha city are both featured with other pollutants from municipal domestic sewage.
基金Project(E21527)supported by Open Research Fund Program of Hunan Provincial Key Laboratory of Shale Gas Resource Utilization,Hunan University of Science and Technology,ChinaProjects(51174088,51174228)supported by the National Natural Science Foundation of China+1 种基金Project(2013CB035401)supported by the National Basic Research Program of ChinaProject(2015zzts077)supported by the Fundamental Research Funds for the Central Universities,China
文摘Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.
基金Project(41101457) supported by the National Natural Science Foundation of ChinaProject(2009-122) supported by the Fund of Chongqing Municipal Construction Commission, China
文摘Sixteen priority polycyclic aromatic hydrocarbons(PAHs) in surface water samples were analyzed by gas chromatograph-mass spectrometer(GC-MS) to study their distribution and characterizing sources.The water samples were collected from five sites(J1-J5) in the Jialing River of Chongqing downtown area from September 2009 to August 2010.The results demonstrate that the concentration of total PAHs in three samples upstream are relatively higher than those in other two sites downstream,with average concentration of total PAHs for each site ranging from 811.5 ng/L to 1585.8 ng/L.The 2,3 and 4-ring PAHs for sampling stations account for 13.0%,56.6% and 28.6%,respectively,in total PAHs.There are obvious tendencies of seasonal change for PAHs concentration in surface water.The PAHs concentration in April of wet season is 1 301.6 ng/L,which is 1.3 times the lowest amount of total PAHs in August of flood season.Ratios of specific PAH compounds were used to characterize the possible pollution sources.Experimental results indicate that the PAHs in surface water samples are primarily from pyrolytic PAHs because of factories along these sites,while the direct leakage of petroleum products may be significant for two sites,Jiahua Bridge(J4) and Huanghuayuan Bridge(J5),because of the wharf boat nearby.
文摘Most of China's wetland areas are located in Sanjiang Plain (Three River Basin). It's area has 207×104 hm2 of wet and low-lying farmland, of which 59% is cropped. During 1970s and 1980s, the Chinese government organized intensive scientific research into potential changes to existing natural resources conditions for this farmland. The aim was to make the water resources regime beneficial to crop production. Arterial drainage, field drainage and appropriate sub-soil treatments were suggested. The Four Waters converting mechanism and the estimation of the Four Water converting amount in wet and low-lying farmland were discussed in the paper.
文摘Most of China's wetland areas are located in the Sanjiang Plain.This area has 207×10 4 hm 2 of wet and low lying farmland,of which 59% is cropped.During the 1970s and 1980s,the Chinese government organized intensive scientific research into potential changes to existing natural resources conditions for these farmlands.The aim was to change the water resources regime to one that was beneficial to crop production.Arterial drainage,field drainage and appropriate sub soil treatments were required.The relation between plant products industry and the Four Waters distribution,also the main measures of the Four Waters converting in wet and low lying farmland were discussed in the paper.
文摘Groundwater is an important water resource in Haihe River basin,North China.The number of aquifers that appear to be declining under conditions of groundwater overdraft is increasing.To effectively manage the water resources,there is a strong scientific need to analyze the net use of this important water resource and to quantify the water rights allocation for improved understanding of the future water
基金Supported by National Natural Science Foundation of China(51479032)National Key R&D Plan(2017YFC0406002)
文摘Improving crop water productivity is necessary for ensuring food security. To quantify the water utilization in grain production from multiple perspectives, gross inflow water productivity(WPg), generalized agricultural water productivity(WPa), evapotranspiration water productivity(WPET) and irrigation water productivity(WPI) were examined in this study. This paper calculated and analyzed the temporal and spatial variation in these water productivity(WP) indices in the irrigated land of Heilongjiang Province. The results showed that almost all of the municipal WP indices increased from 2007 to 2015. The four indices showed large differences in scientific connotation and numerical performance, and their degrees of spatial variation were ranked as WPI>WPa>WPg>WPET. The spatial patterns of WP indices in different years were similar; the central and southern regions on the Songnen Plain and the eastern region had high WP values, while those of the northern region were low. Each WP index was used to evaluate the relationship between the input of water resources and the output of grain between different regions. Most cities had the potential to improve WP by reducing the input of irrigation water. Furthermore, the results provided recommendations to decision makers to plan for efficient use of water resources in different cities.
基金Supported by the National Key Research and Development Program of China(2016YFC040010101)。
文摘Different irrigation schemes have different effects on water consumption in rice production.However,few studies have been conducted on the water consumption processes between dry direct seeding rice and transplanting rice under different irrigation schemes.Water consumption process,water use efficiency and correlation effect of water consumption on yield under different planting models in rice production were investigated in northeast China in 2018.Seven treatments were implemented:drip irrigation dry direct seeding rice(DDSR),wet irrigation dry direct seeding rice(WDSR),flooded irrigation dry direct seeding rice(FDSR),transplanting flooded rice(TFR),controlled irrigation transplanting rice(CTR),intermittent irrigation transplanting rice(ITR)and wet irrigation transplanting rice(WTR).Among them,TFR was the control.The results showed that the peaks of the water consumption amount,intensity and its modulus coefficient of the seven treatments all appeared in the middle tillering and the jointing booting stages.The total water consumption amount(ET)and average water consumption intensity of DDSR,WDSR,FDSR and WTR were lower than those of TFR,CTR and ITR.The maximum water use efficiency of yield(WUEy)occurred in DDSR with a value of 3.8 kg·m^(-3).WUEy of DDSR,WDSR and FDSR were significantly higher than those of TFR,CTR and ITR.In the middle tillering and the heading and flowering stages,the water consumption amount of each treatment had a positive effect on yield formation,and the water consumption amount in the late tillering stage had a negative effect on yield formation.The relationship between ET and yield(Y)of dry direct seeding and transplanting planting models showed a quadratic function curve.ET of transplanting planting model had a significant positive impact on Y,and ET of dry direct seeding planting model had no impact on Y.DDSR had the least total water consumption of 199.8 mm·m^(-2),the lowest water consumption intensity of 2.0 mm·d^(-1) and the greatest water use efficiency of 3.8 kg·m^(-3),which suggested that DDSR had the most significant water saving effect.The combination of dry direct seeding planting model and drip irrigation scheme would be a good option for determining a water-saving rice planting model in northeast China.
基金National High-Tech R&D Program of China(863 Program)(2015AA043401)。
文摘The carbon fiber reinforced composite is a new type of composite material with an excellent property in strength and elastic modulus,and has found extensive applications in aerospace,energy,automotive industry and so on.However,this composite has a strict requirement on processing techniques,for example,brittle damage or delamination often exists in conventional processing techniques.Abrasive water jet machining technology is a new type of green machining technique with distinct advantages such as high-energy and thermal distortion free.The use of abrasive water jet technique to process carbon fiber composite materials has become a popular trend since it can significantly improve the processing accuracy and surface quality of carbon fiber composite materials.However,there are too many parameters that affect the quality of an abrasive water jet machining.At present,few studies are carried out on the parameter optimization of such a machining process,which leads to the unstable quality of surface processing.In this paper,orthogonal design of experiment and regression analysis were employed to establish the empirical model between cutting surface roughness and machining process parameters.Then a verified model was used to optimize the machining process parameters for abrasive water jet cutting carbon fiber reinforced composites.
文摘Strontium has four naturally occurring stable isotopes,84Sr,86Sr,87Sr,and 88Sr,with abundances of 0.56,9.87,approximately 7.04,and 82.53 atomic %,respectively.The 87Sr/86Sr isotope ratio is variable due to the addition of radiogenic 87Sr produced by the beta decay of 87Rb with a half-life of 4.88 ± 0.05 Ga.Thus,
基金Project supported by Ministry of Science and Technology of China （2008AA06Z308）, National Natural Science Foundation of China （40901150）, Joint Fund of the National Natural Science Foundation of China （U0970166）, Doctoral Program Foundation of Institutions of Higher Education of China （20070141004）, Program for Liaoning Excel- lent Talents in University of China （2009R09）, Fundamental Research Fund for the Central Universities （DUT12RC（3）12）.
文摘Bacterial and chemical contaminations of drinking water imperil the health of people.A reactive species injection method is presented for sterilizing drinking water.To produce reactive species,a gas phase surface discharge reactor(SDR)is designed:a spiral stainless steel wire attached on the inside wall of a quartz glass tube is used as the high voltage electrode,and the drinking water is the ground electrode.The performance and mechanisms of the method in inactivating of Escherichia coli(E.coli)are analyzed.Experimental results show that 500 mL E.coli-contaminated drinking water(108CFU/mL)is completely sterilized within 4 min.Based on the scanning electron microscope(SEM)analysis,there were plasma-induced cell structure damages of the E.coli in the sterilized water,and the damage resulted in the leakage of protein,which was proved by chemical analyses.Meanwhile,the heating effect concomitantly generated by discharge plasma does not influence E.coli inactivation,and the contribution of direct ultraviolet(UV)irradiation could be neglected too.The ozone generated by SDR and the hydroxyl radicals(·OH)subsequently generated in drinking water play the decisive roles in E.coli inactivation because these reactive species cause the cell rupture.
基金Project(KLVF-2007-4) supported by Key Laboratory of the Three Gorges Reservoir Region’s Eco-Environment,Ministry of Education,Chongqing University,ChinaProject(CSTC2008CE9095) supported by Chongqing Science and Technology Commission,ChinaProject(KJ080803) supported by Chongqing Municipal Education Commission,China
文摘Based on a detailed environmental investigation of the whole Qingshui Stream catchments,samples of water and surface sediments were collected at 15 different places from the upper to the lower reaches of Qingshui Stream,and samples of suspended matter were obtained by filtrating the water samples. The concentrations of heavy metals (Cd,Cu and Zn) were measured in filtered water,suspended matter,and surface sediment by ICP-AES. The results show that the concentrations of the three heavy metals in filtered water are 0.18,6.6 and 17.67 μg/L,lower than that of the Fresh Water Quality Criteria (US EPA) and those of the plain urban rivers,but the contents of Cd,Cu and Zn are much higher than the mean values of rivers in the world and the background value in Jialing River basin. The heavy metals concentrations in the suspended matter from Qingshui Stream are 2.08,438.14 and 1 348.05 mg/kg,much higher than the corresponding background values of soils in Chongqing city. The heavy metals concentrations in the surface sediment from Qingshui Stream are 0.84,189.75 and 838.23 mg/kg,and the values of index of geoaccumulation Igeo of Cd,Cu and Zn show that their pollution degrees are moderate. The heavy metals exist in three transferable forms such as water,suspended matter and surface sediment in Qingshui Stream. The heavy metals concentrations in water are the lowest,and those in the suspended matter are the highest,so the ecological risk in suspended matter is the highest. The distribution tendencies of three metals in water,suspended matter and surface sediment in main riverbed are different.
基金Projects(2018YFC1801805,2018YFC1903301)supported by National Key R&D Program of ChinaProject(51825403)supported by National Science Fund for Distinguished Young Scholars,ChinaProject(2019SK2281)supported by Key R&D Program of Hunan Province,China。
文摘The purpose of this research was to better understand the water quality status of the Xiangjiang River, China, and to evaluate the risks posed by the river water. Precisely, ten water quality parameters including p H, dissolved oxygen(DO), Escherichia coli(E. coli), potassium permanganate index(CODMn), dichromate oxidizability(CODCr), five-day biochemical oxygen demand(BOD5), ammonia nitrogen(NH4+-N), total phosphorus(TP) and fluoride(F-) as well as metal(loid)s(Pb, Hg, Cd, As, Zn, Cu and Se) were monitored monthly in 2016 at 12 sampling sites throughout the Hengyang section of the Xiangjiang River. Concentrations of all parameters were presented according to rainy and dry seasons. They were compared with Chinese surface water standards and WHO drinking water limits to assess the sustainability of the river water status. Principal component analysis(PCA) revealed different pollution sources in different seasons. Dual hierarchical cluster analysis(DHCA) was applied to further classify the water quality variables and sampling sites. Besides, a risk assessment was introduced to evaluate the carcinogenic and non-carcinogenic concerns of heavy metal(loid)s to human health. This research will help to optimize water monitoring locations and establish pollution reduction strategies on the preservation of public safety.
基金Supporting founds:National Key R&D Program(2016YFC0400204)Natural Science Foundation of China(51479161,51279157,51779205)。
文摘Six-year old apple trees were selected for field experiment.The objective of this study was to obtain the reasonable arrangement of surge-root irrigation emitters in apple orchards.There were three factors:the buried depth H(25,40,55 cm),the horizontal distance L(30,40,60 cm)between the emitters and the trunk of the experimental tree,and the number of the irrigation emitters N(1,2,4).The effect of the arrangement of surge-root irrigation emitters on the growth,yield and irrigation water use efficiency(IWUE)of apple trees were studied in Northern Shaanxi where the irrigation quota takes 60%-75%of the field water capacity.The results showed that the arrangement of emitters for surge-root irrigation had a significant effect on apple tree yield and IWUE,especially,the yield and IWUE reached 28388.17 kg/hm2 and 16.83 kg/m3 in treatment T3,respectively.At the same L and N levels(T1,T2,and T3),the yield and IWUE in treatment T3 were the highest,and the yields in treatments T1 and T2 were decreased by 26.22%and 31.48%,while IWUE is reduced by14.02%and 18.12%compared with T3,respectively.At the same H and N levels(T3,T4,and T5),the yield and IWUE of apple trees were decreased with increasing L level.Especially,when L was 30 cm(T3),the yield and IWUE were the highest.The same L and H levels(T3,T6,and T7)could promote the growth of apple trees when N was 2(T3).Compared with treatment T3,it was found that the increment of new shoots was decreased by 8.07%-18.71%,and the fruit diameter was decreased by 5.41%-9.11%.Therefore,two emitters should be arranged symmetrically on both sides of an apple tree,each was buried at a 40 cm depth and 30 cm away from the trunk of the tree to effectively improve the yield and IWUE of the apple tree in mountainous areas in Northern Shaanxi.
基金Projects(51205171,51376081)supported by the National Natural Science Foundation of ChinaProject(1201026B)supported by the Postdoctoral Science Foundation of Jiangsu Province,China
文摘At jet pressures ranging from 80 to 120 MPa, submerged water jets are investigated by numerical simulation and experiment. Numerical simulation enables a systematic analysis of major flow parameters such as jet velocity, turbulent kinetic energy as well as void fraction of cavitation. Experiments facilitate an objective assessment of surface morphology, micro hardness and surface roughness of the impinged samples. A comparison is implemented between submerged and non-submerged water jets. The results show that submerged water jet is characterized by low velocity magnitudes relative to non-submerged water jet at the same jet pressure. Shear effect serves as a key factor underlying the inception of cavitation in submerged water jet stream. Predicted annular shape of cavity zone is substantiated by local height distributions associated with experimentally obtained footprints. As jet pressure increases, joint contribution of jet kinetic energy and cavitation is demonstrated. While for non-submerged water jet, impingement force stems exclusively from flow velocity.
基金Project(40404001) supported by the National Natural Science Foundation of China
文摘Based on the hazard development mechanism, a water solution area is closely related to the supporting effect of pressure-bearing water, the relaxing and collapsing effect of orebody interlayer, the collapsing effect of thawless material in orebody, filling effect caused by cubical expansibility of hydrate crystallization and uplifting effect of hard rock layer over cranny belt. The movement and deformation of ground surface caused by underground water solution mining is believed to be much weaker than that caused by well lane mining, which can be predicted by the stochastic medium theory method. On the basis of analysis on the engineering practice of water solution mining, its corresponding parameters can be obtained from the in-site data of the belt water and sand filling mining in engineering analog approach.
基金Project(Xiangjianke(2007)No.425) supported by Scientific Research Fund of Hunan Provincial Construction DepartmentProject supported by the Youth Framework Teacher Fund of Xiangtan University(2006)
文摘Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The experimental results show that with the increase of adding additional water use,the compressive strength and splitting tensile strength of recycled coarse aggregate concrete decrease,but that of recycled fine aggregate concrete and recycled all aggregate concrete increase firstly then decrease.When additional water use is added more 15% or 20% than that of basic ordinary concrete,the recycled coarse aggregate concrete and fine one can get pretty good fluidity.When it is added more 30%,the recycled all aggregate concrete has fluidity that is just satisfied.
基金Supported by the National Key Scientific and Technological Project,China (2006BAD29b06)
文摘The laws of water consumption in corn,peanuts and millet on the semi-drought area of western Liaoning Province were studied through the FAO-Penman Monteith method and the water balance method.Among three corps,the amount of the day water demand,the whole growth period water demand and the soil water deficit of corn were all the largest.At the same time,its degree of agreement between the water demand and the level of precipitation was the worst,and its average in crop coefficient was larger.The amount of th...
