This paper analyzes a problem processing mechanism in a new collaboration system between the main manufacturer and the supplier in the"main manufacturer-supplier"mode,which has been widely applied in the col...This paper analyzes a problem processing mechanism in a new collaboration system between the main manufacturer and the supplier in the"main manufacturer-supplier"mode,which has been widely applied in the collaborative development management of the complex product.This paper adopts the collaboration theory,the evolutionary game theory and numerical simulation to analyze the decision-making mechanism where one upstream supplier and one downstream manufacturer must process an unpredicted problem without any advance contract in common.Results show that both players'decision-makings are in some correlation with the initial state,income impact coefficients,and dealing cost.It is worth noting that only the initial state influences the final decision,while income impact coefficients and dealing cost just influence the decision process.This paper shows reasonable and practical suggestions for the manufacturer and supplier in a new collaboration system for the first time and is dedicated to the managerial implications on reducing risks of processing problems.展开更多
The contemporary environment within which command,control,communications,computers and intelligence (C4I platforms exist, have a number of characteristics. These characteristics may be most obviously identified as int...The contemporary environment within which command,control,communications,computers and intelligence (C4I platforms exist, have a number of characteristics. These characteristics may be most obviously identified as interconnectivity, international networking, speed of data transfer, the compact nature of electronic information and rapidly changing technology. Information security professionals employ a variety of approaches in order to counter risks within this complex and fluid environment. The gamut of potential security activities ranges form access control through a variety of auditing techniques to secure data communications. This field is broad and well documented. Indeed, the discipline of network risk management and data security is both well developed and sophisticated.This paper addresses twin themes:i.The fundamental issue of the method by which specific approaches are employed. This is a precursor to the adoption of an eventual strategy.ii.The crucial issues revolving around the展开更多
The Historical Resultant Theory and The Scientific Outlook on Development are consistent in essence,with the former serving as the philosophical foundation of the latter,and the latter being the new and modern form of...The Historical Resultant Theory and The Scientific Outlook on Development are consistent in essence,with the former serving as the philosophical foundation of the latter,and the latter being the new and modern form of the former.Thorough analysis and deep understanding of the dialectical relationship of the two theories contributes a lot to promoting China's localization of Marxism and to building a harmonious socialist society,both theoretically and practically.展开更多
In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to eva...In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.展开更多
Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ...Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.展开更多
This paper studies the scheduling of design projects in concurrent development process with uncertain number of feedback revisions. An optimization based methodology that combines heuristic algorithm, artificial intel...This paper studies the scheduling of design projects in concurrent development process with uncertain number of feedback revisions. An optimization based methodology that combines heuristic algorithm, artificial intelligence (fuzzy, genetic algorithm) and scheduling theory is developed. In the algorithm, weighting values of some key factors are defined by genetic algorithm. In addition, fuzzy logic is used to decide the ability coefficients of different roles taken by designers. Moreover, the process of pre-release and feedback revision is realized. Simulation example is a fraction of practical development project, and satisfied results are obtained.展开更多
Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the pro...Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the proposed trilateral-cycle(TLC) power system exhibits high thermodynamic efficiency during heat recovery-to-power from low-to-medium temperature heat sources.The TLCs are proposed and analysed using n-pentane as working fluid for waste heat recovery-to-power generation from low-grade heat source to evaluate the thermodynamic efficiency of the cycles.Four different single stage TLC configurations with distinct working principles are modelled thermodynamically using engineering equation solver.Based on the thermodynamic framework,thermodynamic performance simulation and efficiency analysis of the cycles as well as the exergy efficiencies of the heating and condensing processes are carried out and compared in their efficiency.The results show that the simple TLC,recuperated TLC,reheat TLC and regenerative TLC operating at subcritical conditions with cycle high temperature of 473 K can attain thermal efficiencies of 21.97%,23.91%,22.07% and 22.9%,respectively.The recuperated TLC attains the highest thermodynamic efficiency at the cycle high temperature because of its lowest exergy destruction rates in the heat exchanger and condenser.The efficiency analysis carried out would assist in guiding thermodynamic process development and thermal integration of the proposed cycles.展开更多
基金supported by the National Natural Science Foundation of China(7117111271502073)。
文摘This paper analyzes a problem processing mechanism in a new collaboration system between the main manufacturer and the supplier in the"main manufacturer-supplier"mode,which has been widely applied in the collaborative development management of the complex product.This paper adopts the collaboration theory,the evolutionary game theory and numerical simulation to analyze the decision-making mechanism where one upstream supplier and one downstream manufacturer must process an unpredicted problem without any advance contract in common.Results show that both players'decision-makings are in some correlation with the initial state,income impact coefficients,and dealing cost.It is worth noting that only the initial state influences the final decision,while income impact coefficients and dealing cost just influence the decision process.This paper shows reasonable and practical suggestions for the manufacturer and supplier in a new collaboration system for the first time and is dedicated to the managerial implications on reducing risks of processing problems.
文摘The contemporary environment within which command,control,communications,computers and intelligence (C4I platforms exist, have a number of characteristics. These characteristics may be most obviously identified as interconnectivity, international networking, speed of data transfer, the compact nature of electronic information and rapidly changing technology. Information security professionals employ a variety of approaches in order to counter risks within this complex and fluid environment. The gamut of potential security activities ranges form access control through a variety of auditing techniques to secure data communications. This field is broad and well documented. Indeed, the discipline of network risk management and data security is both well developed and sophisticated.This paper addresses twin themes:i.The fundamental issue of the method by which specific approaches are employed. This is a precursor to the adoption of an eventual strategy.ii.The crucial issues revolving around the
文摘The Historical Resultant Theory and The Scientific Outlook on Development are consistent in essence,with the former serving as the philosophical foundation of the latter,and the latter being the new and modern form of the former.Thorough analysis and deep understanding of the dialectical relationship of the two theories contributes a lot to promoting China's localization of Marxism and to building a harmonious socialist society,both theoretically and practically.
基金supported by the National Natural Science Foundation for Youth of China(61802174)the Natural Science Foundation for Youth of Jiangsu Province(BK20181016)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(18KJB520019)the Scientific Research Foundation of Nanjing Institute of Technology of China(YKJ201614)
文摘In order to assure quality and control process in the development of the aircraft collaborative design software, a maturity assessment model is proposed. The requirements designing—house of quality is designed to evaluate the maturity degree of the solution, and the evaluation results can help to manage and control the development process. Furthermore, a fuzzy evaluation method based on the minimum deviation is proposed to deal with the fuzzy information. The quantitative evaluation result of the maturity degree can be calculated by optimizing the semantic discount factor aim for the minimum deviation. Finally, this model is illustrated and analyzed by an example study of the aircraft collaborative design software.
文摘Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.
文摘This paper studies the scheduling of design projects in concurrent development process with uncertain number of feedback revisions. An optimization based methodology that combines heuristic algorithm, artificial intelligence (fuzzy, genetic algorithm) and scheduling theory is developed. In the algorithm, weighting values of some key factors are defined by genetic algorithm. In addition, fuzzy logic is used to decide the ability coefficients of different roles taken by designers. Moreover, the process of pre-release and feedback revision is realized. Simulation example is a fraction of practical development project, and satisfied results are obtained.
基金The University of Ilorin,Nigeria financially supported this research through scholarship grant from Tertiary Education Trust Fund
文摘Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the proposed trilateral-cycle(TLC) power system exhibits high thermodynamic efficiency during heat recovery-to-power from low-to-medium temperature heat sources.The TLCs are proposed and analysed using n-pentane as working fluid for waste heat recovery-to-power generation from low-grade heat source to evaluate the thermodynamic efficiency of the cycles.Four different single stage TLC configurations with distinct working principles are modelled thermodynamically using engineering equation solver.Based on the thermodynamic framework,thermodynamic performance simulation and efficiency analysis of the cycles as well as the exergy efficiencies of the heating and condensing processes are carried out and compared in their efficiency.The results show that the simple TLC,recuperated TLC,reheat TLC and regenerative TLC operating at subcritical conditions with cycle high temperature of 473 K can attain thermal efficiencies of 21.97%,23.91%,22.07% and 22.9%,respectively.The recuperated TLC attains the highest thermodynamic efficiency at the cycle high temperature because of its lowest exergy destruction rates in the heat exchanger and condenser.The efficiency analysis carried out would assist in guiding thermodynamic process development and thermal integration of the proposed cycles.
