To investigate the problem of ethylene jet mixing and combustion in the scramjet at high Mach number(Ma = 8), numerical simulations were carried out for different equivalent ratios at cold and combustion conditions, i...To investigate the problem of ethylene jet mixing and combustion in the scramjet at high Mach number(Ma = 8), numerical simulations were carried out for different equivalent ratios at cold and combustion conditions, in which three-dimensional steady compressible RANS and k-ω SST turbulence model were adopted. It demonstrates that as the equivalence ratio increases from 0.42 to 1.08, the combustion becomes more intensified, and the higher backpressure pushes flame to propagate upstream. The supersonic combustion region in the combustor decreases from 92% to 85% with the increase of equivalence ratio from 0.42 to 1.08, resulting in the transition of the combustor from scram-mode to dual-mode. Both mixing and combustion efficiencies decrease by 35% and 16% respectively when the equivalence ratio increases from 0.42 to 1.08, indicating that the high equivalence ratio is unfavorable to the mixing and combustion processes. Combustion mode analysis reveals that the flame in the cavity under the high Mach number is dominated by non-premixed flames, i.e., more than 95% behaves as non-premixed mode, and the heat release is also mainly contributed by non-premixed flame. Increasing the equivalence ratio is beneficial to the thrust performance. Although the viscous force hardly changes with equivalence ratio, the percentage of pressure force used to balance the viscous force increases gradually,which limits the engine performance.展开更多
Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angl...Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12n. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.展开更多
The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-d...The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency.The major influencing ATIG welding parameters,such as electrode gap,travel speed,current and voltage,that aid in controlling the aspect ratio of DSS joints,must be optimized to obtain desirable aspect ratio for DSS joints.Hence in this study,the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array(OA)experimental design and other statistical tools such as Analysis of Variance(ANOVA) and Pooled ANOVA techniques.The optimum process parameters are found to be 1 mm electrode gap,130 mm/min travel speed,140 A current and 12 V voltage.The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.展开更多
An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes a...An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes are expressed with values of linguistic variables parameterized using triangular fuzzy numbers.A compromise solution is determined by introducing the ranking index based on the concept that the chosen alternative should be as close as possible to the positive ideal solution and as far away from the negative ideal solution as possible simultaneously.This proposed method is compared with other existing methods to show its feasibility and effectiveness and illustrated with an example of the military route selection problem as one of the possible applications.展开更多
二氧化碳(CO_(2))捕集与封存技术有利于减少CO_(2)的排放量,近年来针对CO_(2)地质封存形成了从纳米尺度到油气藏尺度的大量研究成果,大多数研究只针对单一维度多孔介质中流动行为开展研究,且物理实验方法受许多不确定性因素影响,十分耗...二氧化碳(CO_(2))捕集与封存技术有利于减少CO_(2)的排放量,近年来针对CO_(2)地质封存形成了从纳米尺度到油气藏尺度的大量研究成果,大多数研究只针对单一维度多孔介质中流动行为开展研究,且物理实验方法受许多不确定性因素影响,十分耗费时间和成本。为了从微观角度深入理解CO_(2)地质封存过程中的渗流行为,提高CO_(2)地质埋存量,基于追踪两相界面动态变化的VOF(Volume of Fluid)方法,分别建立了2D和3D模型,开展了超临界CO_(2)-水两相流动数值模拟研究,对比了不同润湿性、毛细管数、黏度比条件下的CO_(2)团簇分布特征、CO_(2)饱和度变化规律,揭示了孔隙尺度CO_(2)埋存的内在机理。研究结果表明:①随着岩石对CO_(2)润湿性增加,CO_(2)波及范围扩大,同时CO_(2)团簇的卡断频率减少,CO_(2)埋存量增加;②随着毛细管数的增加,驱替模式由毛细指进转变为稳定驱替,CO_(2)埋存量增加;③随着注入超临界CO_(2)黏度逐渐接近水的黏度,两相流体之间的流动阻力降低,促进了“润滑效应”,CO_(2)相的渗流能力提高,CO_(2)埋存量增加;④润湿性、毛细管数、黏度比在不同维度多孔介质模型中对CO_(2)饱和度的影响程度不同。结论认为,基于VOF方法的CO_(2)-水两相渗流模拟研究在孔隙尺度上揭示了CO_(2)地质封存过程中的渗流机理,对CCUS技术的发展有指导意义,也为更大尺度的CO_(2)地质封存研究提供了理论指导和技术支撑。展开更多
文摘To investigate the problem of ethylene jet mixing and combustion in the scramjet at high Mach number(Ma = 8), numerical simulations were carried out for different equivalent ratios at cold and combustion conditions, in which three-dimensional steady compressible RANS and k-ω SST turbulence model were adopted. It demonstrates that as the equivalence ratio increases from 0.42 to 1.08, the combustion becomes more intensified, and the higher backpressure pushes flame to propagate upstream. The supersonic combustion region in the combustor decreases from 92% to 85% with the increase of equivalence ratio from 0.42 to 1.08, resulting in the transition of the combustor from scram-mode to dual-mode. Both mixing and combustion efficiencies decrease by 35% and 16% respectively when the equivalence ratio increases from 0.42 to 1.08, indicating that the high equivalence ratio is unfavorable to the mixing and combustion processes. Combustion mode analysis reveals that the flame in the cavity under the high Mach number is dominated by non-premixed flames, i.e., more than 95% behaves as non-premixed mode, and the heat release is also mainly contributed by non-premixed flame. Increasing the equivalence ratio is beneficial to the thrust performance. Although the viscous force hardly changes with equivalence ratio, the percentage of pressure force used to balance the viscous force increases gradually,which limits the engine performance.
基金supported by the Second Stage of Brain Korea 21 Projects,Korea
文摘Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12n. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.
文摘The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency.The major influencing ATIG welding parameters,such as electrode gap,travel speed,current and voltage,that aid in controlling the aspect ratio of DSS joints,must be optimized to obtain desirable aspect ratio for DSS joints.Hence in this study,the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array(OA)experimental design and other statistical tools such as Analysis of Variance(ANOVA) and Pooled ANOVA techniques.The optimum process parameters are found to be 1 mm electrode gap,130 mm/min travel speed,140 A current and 12 V voltage.The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.
基金supported by the National Natural Science Foundation of China (7087111770571086)
文摘An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes are expressed with values of linguistic variables parameterized using triangular fuzzy numbers.A compromise solution is determined by introducing the ranking index based on the concept that the chosen alternative should be as close as possible to the positive ideal solution and as far away from the negative ideal solution as possible simultaneously.This proposed method is compared with other existing methods to show its feasibility and effectiveness and illustrated with an example of the military route selection problem as one of the possible applications.
文摘二氧化碳(CO_(2))捕集与封存技术有利于减少CO_(2)的排放量,近年来针对CO_(2)地质封存形成了从纳米尺度到油气藏尺度的大量研究成果,大多数研究只针对单一维度多孔介质中流动行为开展研究,且物理实验方法受许多不确定性因素影响,十分耗费时间和成本。为了从微观角度深入理解CO_(2)地质封存过程中的渗流行为,提高CO_(2)地质埋存量,基于追踪两相界面动态变化的VOF(Volume of Fluid)方法,分别建立了2D和3D模型,开展了超临界CO_(2)-水两相流动数值模拟研究,对比了不同润湿性、毛细管数、黏度比条件下的CO_(2)团簇分布特征、CO_(2)饱和度变化规律,揭示了孔隙尺度CO_(2)埋存的内在机理。研究结果表明:①随着岩石对CO_(2)润湿性增加,CO_(2)波及范围扩大,同时CO_(2)团簇的卡断频率减少,CO_(2)埋存量增加;②随着毛细管数的增加,驱替模式由毛细指进转变为稳定驱替,CO_(2)埋存量增加;③随着注入超临界CO_(2)黏度逐渐接近水的黏度,两相流体之间的流动阻力降低,促进了“润滑效应”,CO_(2)相的渗流能力提高,CO_(2)埋存量增加;④润湿性、毛细管数、黏度比在不同维度多孔介质模型中对CO_(2)饱和度的影响程度不同。结论认为,基于VOF方法的CO_(2)-水两相渗流模拟研究在孔隙尺度上揭示了CO_(2)地质封存过程中的渗流机理,对CCUS技术的发展有指导意义,也为更大尺度的CO_(2)地质封存研究提供了理论指导和技术支撑。
