The development of guidance technology has made it possible for the earth penetration weapons(EPWs)to impact the target repeatedly at a close range. To investigative the damage of single and sequential strike induced ...The development of guidance technology has made it possible for the earth penetration weapons(EPWs)to impact the target repeatedly at a close range. To investigative the damage of single and sequential strike induced by the EPWs, experimental and numerical investigations are carried out in this paper.Firstly, a series of sequential explosion tests are conducted to provide the basic data of the crater size.Then, a numerical model is established to simulate the damage effects of sequential explosions using the meshfree method of Smoothed particle Galerkin. The effectiveness of numerical model is verified by comparison with the experimental results. Finally, based on dimensional analysis, several empirical formulas for describing the crater size are presented, including the conical crater diameter and the conical crater depth of the single explosion, the conical crater area and the joint depth of the secondary explosion. The formula for the single explosion expresses the relationship between the aspect ratio of the charge ranging from 3 to 7, the dimensionless buried depth ranging from 2 to 14 and the crater size. The formula for the secondary explosion expresses the relationship between the relative position of the two explosions and the crater size. All of data can provide reference for the design of protective structures.展开更多
The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-d...The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency.The major influencing ATIG welding parameters,such as electrode gap,travel speed,current and voltage,that aid in controlling the aspect ratio of DSS joints,must be optimized to obtain desirable aspect ratio for DSS joints.Hence in this study,the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array(OA)experimental design and other statistical tools such as Analysis of Variance(ANOVA) and Pooled ANOVA techniques.The optimum process parameters are found to be 1 mm electrode gap,130 mm/min travel speed,140 A current and 12 V voltage.The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.展开更多
The dynamics of the scattering processes of diatomic molecules from metal surfaces has been studied with different theoretical approaches. Modified LEPS (London-Eyring-Polanyi-Sato) potential surfaces for several diat...The dynamics of the scattering processes of diatomic molecules from metal surfaces has been studied with different theoretical approaches. Modified LEPS (London-Eyring-Polanyi-Sato) potential surfaces for several diatomie molecule-surface systems have been constructed and examined for the dynamic study. The surfaces are treated as rigid but corrugated. The potential parameters are adjusted to produce reliable potential hypersurfaces. Molecular dissociation, diffraction, adsorption and consequent desorption in the scattering processes have been observed through quasiclassieal trajectory calculations. The significance of the effective corrugation of the potential surfaces has been evaluated in calculating the dissociation and adsorption probabilities. Vibration-rotation-translation energy transfer in the inelastic scattering is investigated to understand the mechanism of selective adsorptions mediated through vibrational or rotational degrees of freedom. We have carried out quantum mechanical calculations to obtain the rotational and vibrational transition probabilities. Relative importance of rotational and vibrational transitions for each adsorbed state with respect to incidence energy has been carefully examined to determine the dominant factor which causes the adsorbed state. The results show that vibration mediation is an essential factor to the selective adsorption especially in the ease of higher incidence energies.展开更多
In this paper, we will address common psychological reactions to disability such as anxiety, depression, denial, and anger in the framework of a stage model. In addition, this paper will discuss specific societal aspe...In this paper, we will address common psychological reactions to disability such as anxiety, depression, denial, and anger in the framework of a stage model. In addition, this paper will discuss specific societal aspects that can impact reaction and adjustment to disability. In this vein, we will examine the specific effects of societal attitudes and stigma upon individuals with disabilities. Strategies for changing attitudes and facilitating adjustment to disability will also be discussed.展开更多
Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field exper...Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.展开更多
In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of cal...In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of calcium sulfate dihydrate(CaSO4·2H2O)precursor.The presence of 2.60×10–3 mol/L CuCl2·2H2O resulted in the increase of the aspect ratios ofα-CaSO4·0.5H2O whiskers from 81 to 253.The preferential adsorption of Cu2+on the negative{110}and{100}facets ofα-CaSO4·0.5H2O crystal structures was confirmed by EDS and XPS.And ATR-FTIR demonstrated the ligand adsorption of Cu2+on the surface ofα-CaSO4·0.5H2O whiskers.The experimental results reveal that the whiskers with high aspect ratios are attributed to the adsorption of Cu2+,which promotes the 1-D growth ofα-CaSO4·0.5H2O whiskers along the c axis.展开更多
A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels wi...A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels with manifold structures. On the basis of multi-tool milling process, the structural design of the manifold side height, microchannel length, width, number, and interval were analyzed. The heat transfer performances of high-aspect-ratio microchannel heat exchangers with two different manifolds were investigated by experiments, and the influencing factors were analyzed. The results indicate that the magnitude of heat transfer area per unit volume dominates the heat transfer performances of plate-type micro heat exchanger, while the velocity distribution between microchannels has little effects on the heat transfer performances.展开更多
We have come to know comprehension better by studying the nature and characteristics of reading processes and by weighing the pros and cons of different reading theories and their influence on the teaching of reading....We have come to know comprehension better by studying the nature and characteristics of reading processes and by weighing the pros and cons of different reading theories and their influence on the teaching of reading. But in China, unfortunately, few achievements have been made in the field of reading theory research. Thus, in order to ameliorate our reading teaching, it is urgent for us to set up our own system of reading theories. The author, after studying carefully the present reading models in China and by absorbing the quintessence of foreign reading theories, ventures to suggest the “discourse word discourse” model. The model gives full thought to the characteristics of Chinese college students and thus suits a reading classroom in China better. However, the comprehension factors involved in the model are far from exhaustive and the model itself leaves much room for modification and addition.\;展开更多
0 Introduction Economy and the protection of the environment are important topics.We are competent to talk about these topics.Due to the expanding areas of application for highprecision and electroplated diamond tools...0 Introduction Economy and the protection of the environment are important topics.We are competent to talk about these topics.Due to the expanding areas of application for highprecision and electroplated diamond tools with reproducible quality and long life,of course the aspects of economy and environmental protection gain increasing significance.In this lecture we will explain and show that economical aspects and environmental aspects in diamond electro-plating do not contradict,but rather complement each other.展开更多
Differences between spoken and written English has been one of the mostdiscussed topics in the teaching and learning of the language.Here I am not intend-ing to participate in such a discussion.Instead,I am just tryin...Differences between spoken and written English has been one of the mostdiscussed topics in the teaching and learning of the language.Here I am not intend-ing to participate in such a discussion.Instead,I am just trying to offer our stu-dents some conversational’tips’which may help them overcome some of their dif-ficulties in conducting an English展开更多
文摘The development of guidance technology has made it possible for the earth penetration weapons(EPWs)to impact the target repeatedly at a close range. To investigative the damage of single and sequential strike induced by the EPWs, experimental and numerical investigations are carried out in this paper.Firstly, a series of sequential explosion tests are conducted to provide the basic data of the crater size.Then, a numerical model is established to simulate the damage effects of sequential explosions using the meshfree method of Smoothed particle Galerkin. The effectiveness of numerical model is verified by comparison with the experimental results. Finally, based on dimensional analysis, several empirical formulas for describing the crater size are presented, including the conical crater diameter and the conical crater depth of the single explosion, the conical crater area and the joint depth of the secondary explosion. The formula for the single explosion expresses the relationship between the aspect ratio of the charge ranging from 3 to 7, the dimensionless buried depth ranging from 2 to 14 and the crater size. The formula for the secondary explosion expresses the relationship between the relative position of the two explosions and the crater size. All of data can provide reference for the design of protective structures.
文摘The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency.The major influencing ATIG welding parameters,such as electrode gap,travel speed,current and voltage,that aid in controlling the aspect ratio of DSS joints,must be optimized to obtain desirable aspect ratio for DSS joints.Hence in this study,the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array(OA)experimental design and other statistical tools such as Analysis of Variance(ANOVA) and Pooled ANOVA techniques.The optimum process parameters are found to be 1 mm electrode gap,130 mm/min travel speed,140 A current and 12 V voltage.The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.
基金The projcct supportcd by National Natural Science Foundation of China
文摘The dynamics of the scattering processes of diatomic molecules from metal surfaces has been studied with different theoretical approaches. Modified LEPS (London-Eyring-Polanyi-Sato) potential surfaces for several diatomie molecule-surface systems have been constructed and examined for the dynamic study. The surfaces are treated as rigid but corrugated. The potential parameters are adjusted to produce reliable potential hypersurfaces. Molecular dissociation, diffraction, adsorption and consequent desorption in the scattering processes have been observed through quasiclassieal trajectory calculations. The significance of the effective corrugation of the potential surfaces has been evaluated in calculating the dissociation and adsorption probabilities. Vibration-rotation-translation energy transfer in the inelastic scattering is investigated to understand the mechanism of selective adsorptions mediated through vibrational or rotational degrees of freedom. We have carried out quantum mechanical calculations to obtain the rotational and vibrational transition probabilities. Relative importance of rotational and vibrational transitions for each adsorbed state with respect to incidence energy has been carefully examined to determine the dominant factor which causes the adsorbed state. The results show that vibration mediation is an essential factor to the selective adsorption especially in the ease of higher incidence energies.
文摘In this paper, we will address common psychological reactions to disability such as anxiety, depression, denial, and anger in the framework of a stage model. In addition, this paper will discuss specific societal aspects that can impact reaction and adjustment to disability. In this vein, we will examine the specific effects of societal attitudes and stigma upon individuals with disabilities. Strategies for changing attitudes and facilitating adjustment to disability will also be discussed.
基金supported by the National Natural Science Foundation of China[No.51978166]。
文摘Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.
基金Project(B14034)supported by the National 111 Project,ChinaProject(2015CX005)supported by the Innovation Driven Plan of Central South University,ChinaProject(2016zzts104)supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to produceα-calcium sulfate hemihydrate(α-CaSO4·0.5H2O)whiskers with high aspect ratios,a minor amount of CuCl2·2H2O was used as the modifying agent in the process of hydrothermal treatment of calcium sulfate dihydrate(CaSO4·2H2O)precursor.The presence of 2.60×10–3 mol/L CuCl2·2H2O resulted in the increase of the aspect ratios ofα-CaSO4·0.5H2O whiskers from 81 to 253.The preferential adsorption of Cu2+on the negative{110}and{100}facets ofα-CaSO4·0.5H2O crystal structures was confirmed by EDS and XPS.And ATR-FTIR demonstrated the ligand adsorption of Cu2+on the surface ofα-CaSO4·0.5H2O whiskers.The experimental results reveal that the whiskers with high aspect ratios are attributed to the adsorption of Cu2+,which promotes the 1-D growth ofα-CaSO4·0.5H2O whiskers along the c axis.
基金Projects(50675070 50805052) supported by the National Nature Science Foundation of China+1 种基金Projects(07118064 8451064101000320) supported by the Natural Science Foundation of Guangdong Province
文摘A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels with manifold structures. On the basis of multi-tool milling process, the structural design of the manifold side height, microchannel length, width, number, and interval were analyzed. The heat transfer performances of high-aspect-ratio microchannel heat exchangers with two different manifolds were investigated by experiments, and the influencing factors were analyzed. The results indicate that the magnitude of heat transfer area per unit volume dominates the heat transfer performances of plate-type micro heat exchanger, while the velocity distribution between microchannels has little effects on the heat transfer performances.
文摘We have come to know comprehension better by studying the nature and characteristics of reading processes and by weighing the pros and cons of different reading theories and their influence on the teaching of reading. But in China, unfortunately, few achievements have been made in the field of reading theory research. Thus, in order to ameliorate our reading teaching, it is urgent for us to set up our own system of reading theories. The author, after studying carefully the present reading models in China and by absorbing the quintessence of foreign reading theories, ventures to suggest the “discourse word discourse” model. The model gives full thought to the characteristics of Chinese college students and thus suits a reading classroom in China better. However, the comprehension factors involved in the model are far from exhaustive and the model itself leaves much room for modification and addition.\;
文摘0 Introduction Economy and the protection of the environment are important topics.We are competent to talk about these topics.Due to the expanding areas of application for highprecision and electroplated diamond tools with reproducible quality and long life,of course the aspects of economy and environmental protection gain increasing significance.In this lecture we will explain and show that economical aspects and environmental aspects in diamond electro-plating do not contradict,but rather complement each other.
文摘Differences between spoken and written English has been one of the mostdiscussed topics in the teaching and learning of the language.Here I am not intend-ing to participate in such a discussion.Instead,I am just trying to offer our stu-dents some conversational’tips’which may help them overcome some of their dif-ficulties in conducting an English
