To investigate the mechanical response during failure and the impact tendency characteristics of gangue-coal combined structure,uniaxial compression tests were conducted on nine groups of combined structures,each with...To investigate the mechanical response during failure and the impact tendency characteristics of gangue-coal combined structure,uniaxial compression tests were conducted on nine groups of combined structures,each with varying gangue thicknesses and positions.The response patterns of compressive strength,elastic modulus,pre-peak accumulated energy,elastic energy index,and impact energy index were systematically analyzed.Furthermore,a new index for evaluating the impact tendency of gangue-containing coal was proposed,and its effectiveness was verified.The findings are as follows:(1)As the gangue thickness increases,both the compressive strength and the pre-peak energy of the combined structure decrease,whereas the elastic modulus increases accordingly.When the gangue is located in the lower middle position,the combined structure exhibits the lowest compressive strength and elastic modulus but the highest pre peak energy.(2)As the gangue shifts toward the middle position of the combined structure,the failure mode gradually transitions from comple te“crushing”failure to an incomplete“point-type”failure.As gangue thickness further increases,the failure region evolves from overall failure to localized failure,with the degree of failure shifting from complete to incomplete.The K_(crc)value corresponding to“crushing”complete failure is higher and has a stronger impact tendency compared to“point-type”incomplete failure.(3)The proposed comprehensive impact instability evaluation index K_(crc)for the gangue-coal combined structure has shown a significant positive correlation with compressive strength(R_(c))and impact energy index(K_(E)),further verifyi ng its rationality in comprehensively assessing the impact tendency of gangue-containing coal bodies.Applying this index to the evaluation of gangue-containing coal seams provides a more accurate reflection of their impact tendency compared with the residual energy index,which has a wide range of potential applications and practical significance.展开更多
To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variatio...To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.展开更多
Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rat...Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rates of 5,10,15 and 20 °C/min in air flow from ambient temperature to 800 °C were studied by simultaneous thermal analysis and the TG/DSC curves before and after the pre-oxidation were compared.By the peak temperature of DTG curves,the whole reaction process for each sample was divided into different stages,and the apparent activation energies were calculated by the Ozawa-Flynn-Wall method.The results show that the reaction process of each sample after pre-oxidation is more complex,with quicker reaction rates,fewer heat production quantities,and higher or lower ignition-points.The apparent activation energies decrease from 364.017-474.228 kJ/mol to 244.523- 333.161 kJ/mol.Therefore,sulfide ores are more susceptible to spontaneous combustion after the pre-oxidation.展开更多
This work aimed to explore the switch tendency of bicycle use between cyclists and non-cyclists.The attitude based market segmentation approach was proposed to achieve the research objective.The filed investigations w...This work aimed to explore the switch tendency of bicycle use between cyclists and non-cyclists.The attitude based market segmentation approach was proposed to achieve the research objective.The filed investigations were conducted in Nanjing,China,to obtain travelers' actions and attitudes towards bicycle uses.The structural equation modeling(SEM) was used to identify the attitudinal factors indicating variables and to explore the interrelationships among them.The SEMs were developed separately for the cyclist group and the non-cyclist group.All respondents were clustered into eight distinct segments by six selected attitudinal factors.The mode switch tendency and attitude in each segment is different from others,indicating that different segments have particular policies or strategies to encourage cycling.Policy implications that best serve the potential bicycle users were discussed to reduce the number of cyclists who have high tendency to use other modes,and increase the possibility of using bicycle in the non-cyclists group with the moderate and high switch tendency.展开更多
Grey sequence generation can draw out and develop implied rules of the original data. Different kinds of generation methods were summarized and classified into two types: partial generation and whole generation. The a...Grey sequence generation can draw out and develop implied rules of the original data. Different kinds of generation methods were summarized and classified into two types: partial generation and whole generation. The average generation and stepwise ratio generation is disussed , the preference generation is regard as a special case of proportional division based on analysis geometric theory, propose an idea of using concave and convex status of discrete data to determine the generation coefficient. Based on the stepwise and smooth ratio generation, a tendency average generation is proposed and have a comparison using the data provided in papers listed in the references. The comparison proves that the new generation is better than the other two generations and errors are obviously reduced.展开更多
Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments...Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments\|NW section and SE section: the construction of the former is single and a main fault; the construction of the latter is complex and composed by three parallel faults, its main fault is named as Selaha—Kangding fault, which distributes along Jinlongsi, Sehala, Mugecuo and Kangding. Yalahe fault, located at the NE direction of the main fault, and Zeduotang fault, located at the SW direction of the main fault, are all secondary faults, which are 9～13km away from the main fault. At the south of Kangding, the segment of Xianshuihe fault is a single main section, called as Moxi fault. On the basis of recent researching results, this paper mainly discusses the slip rate and recurrence interval of strong earthquake of the SE segment (Qianning—Kangding) on Xianshuihe.展开更多
This paper addressed the international transferring t endency of manufacturing industry one by one as follows: (1) The developed count ries realize manufacturing industry structure upgrade reling on worldwide tr ansfe...This paper addressed the international transferring t endency of manufacturing industry one by one as follows: (1) The developed count ries realize manufacturing industry structure upgrade reling on worldwide tr ansference not only domestic transference. On one hand, the TNCs make cross-inv estments, transnational merger & acquisition so as to achieve the optimum colloc ation of R&D resources, and obtain innovation in knowledge and technology. On th e other hand, the developed countries transfer labor and resource intensive indu stry as well as the labor-intensive link of the production chain in highly tech nology industry to the developing countries, to make their industrial structure escalation. (2) The adjustment and upgrade of manufacturing industry presents "m ulti-step type". First, the object of international transference substitutes th e capital-intensive industry and maturing industry with complicate technique fo r the industry with labor-intensive, simple technique or higher pollution, or s ubstitutes non-core complex technological procedure and parts and components fo r assembly in manufacturing process. Secondly, technology transference forms "br ain-hand and foot" pattern, i.e. the developed countries are increasingly p aying more and more attention to the research and control of core technology, th us transferring simple technique and labor-intensive procedure in higher scienc e and technology. Thirdly, the developed countries begins to transfer both capit al and technology intensive production, as well as transfer certain procedures i n higher technology production process to a few developing countries, even t o transfer parts of R & D to developing countries. (3) TNCs promote the global m anufacturing network (GMN) by recombination and transfer. TNCs organize producti on, trade, technological research and transference through foreign direct invest ment (FDI) all over the world, as a result, GMN makes the national competence no longer depend on absolute occupation of certain industries, but on national com prehensive strength and comparative superiority. TNCs try to race to seize the h igher location of industrial value chain, only leaving the core technology and h igher value-added chains in mother countries, on the other hand, they transfer lower manufacturing power more and more to other countries. (4) TNCs transfer th eir domestic manufacturing bases abroad, China would become world- manufacturin g center. Chinese market is increasingly arousing foreign investor’s interest, " Made in China" will be a synonym of manufacturing industry in new century, subst ituting for "Made in U.S.", "Made in Japanese" and "Made in Europe". The Chinese manufacturing industry should hold tightly the opportunity to melt into the wor ldwide recombination and transfer and enter GMN, so as to accomplish leaping dev elopment.展开更多
基金Project(52274130)supported by the National Natural Science Foundation of ChinaProject(ZR2024ZD22)supported by the Major Basic Research Project of the Shandong Provincial Natural Science Foundation,China+1 种基金Project(2023375)supported by the Guizhou University Research and Innovation Team,ChinaProject(LH[2024]-026)supported by the Guizhou Science and Technology Plan Project,China。
文摘To investigate the mechanical response during failure and the impact tendency characteristics of gangue-coal combined structure,uniaxial compression tests were conducted on nine groups of combined structures,each with varying gangue thicknesses and positions.The response patterns of compressive strength,elastic modulus,pre-peak accumulated energy,elastic energy index,and impact energy index were systematically analyzed.Furthermore,a new index for evaluating the impact tendency of gangue-containing coal was proposed,and its effectiveness was verified.The findings are as follows:(1)As the gangue thickness increases,both the compressive strength and the pre-peak energy of the combined structure decrease,whereas the elastic modulus increases accordingly.When the gangue is located in the lower middle position,the combined structure exhibits the lowest compressive strength and elastic modulus but the highest pre peak energy.(2)As the gangue shifts toward the middle position of the combined structure,the failure mode gradually transitions from comple te“crushing”failure to an incomplete“point-type”failure.As gangue thickness further increases,the failure region evolves from overall failure to localized failure,with the degree of failure shifting from complete to incomplete.The K_(crc)value corresponding to“crushing”complete failure is higher and has a stronger impact tendency compared to“point-type”incomplete failure.(3)The proposed comprehensive impact instability evaluation index K_(crc)for the gangue-coal combined structure has shown a significant positive correlation with compressive strength(R_(c))and impact energy index(K_(E)),further verifyi ng its rationality in comprehensively assessing the impact tendency of gangue-containing coal bodies.Applying this index to the evaluation of gangue-containing coal seams provides a more accurate reflection of their impact tendency compared with the residual energy index,which has a wide range of potential applications and practical significance.
基金Projects(51304238,51534008)supported by the National Natural Science Foundation of ChinaProject(2015CX005)supported by Innovation Driven Plan of Central South University,China
文摘To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.
基金Project(51304051)supported by the National Natural Science Foundation of ChinaProject(2012J05088)supported by the Natural Science Foundation of Fujian Province,China+1 种基金Project(022409)supported by School Talent Award of Fuzhou University,ChinaProject(2013-XQ-18)supported by Science&Technology Development Foundation of Fuzhou University,China
文摘Three representative sulfide ore samples were collected from typical metal mines,and their corresponding pre-oxidized products were obtained under nature environment.The thermal behaviors of each sample at heating rates of 5,10,15 and 20 °C/min in air flow from ambient temperature to 800 °C were studied by simultaneous thermal analysis and the TG/DSC curves before and after the pre-oxidation were compared.By the peak temperature of DTG curves,the whole reaction process for each sample was divided into different stages,and the apparent activation energies were calculated by the Ozawa-Flynn-Wall method.The results show that the reaction process of each sample after pre-oxidation is more complex,with quicker reaction rates,fewer heat production quantities,and higher or lower ignition-points.The apparent activation energies decrease from 364.017-474.228 kJ/mol to 244.523- 333.161 kJ/mol.Therefore,sulfide ores are more susceptible to spontaneous combustion after the pre-oxidation.
基金Projects(51208256,51178157)supported by the National Natural Science Foundation of ChinaProject(2012-K5-13)supported by the Ministry of Housing and Urban-Rural Development of China
文摘This work aimed to explore the switch tendency of bicycle use between cyclists and non-cyclists.The attitude based market segmentation approach was proposed to achieve the research objective.The filed investigations were conducted in Nanjing,China,to obtain travelers' actions and attitudes towards bicycle uses.The structural equation modeling(SEM) was used to identify the attitudinal factors indicating variables and to explore the interrelationships among them.The SEMs were developed separately for the cyclist group and the non-cyclist group.All respondents were clustered into eight distinct segments by six selected attitudinal factors.The mode switch tendency and attitude in each segment is different from others,indicating that different segments have particular policies or strategies to encourage cycling.Policy implications that best serve the potential bicycle users were discussed to reduce the number of cyclists who have high tendency to use other modes,and increase the possibility of using bicycle in the non-cyclists group with the moderate and high switch tendency.
文摘Grey sequence generation can draw out and develop implied rules of the original data. Different kinds of generation methods were summarized and classified into two types: partial generation and whole generation. The average generation and stepwise ratio generation is disussed , the preference generation is regard as a special case of proportional division based on analysis geometric theory, propose an idea of using concave and convex status of discrete data to determine the generation coefficient. Based on the stepwise and smooth ratio generation, a tendency average generation is proposed and have a comparison using the data provided in papers listed in the references. The comparison proves that the new generation is better than the other two generations and errors are obviously reduced.
文摘Located on the western of Sichuan, the east border of Tibet plateau, Xianshuihe fault is a significant strong earthquake zone. From Huiyuansi pull\|apart basin in Qianning, Xianshuihe fault can be divided two segments\|NW section and SE section: the construction of the former is single and a main fault; the construction of the latter is complex and composed by three parallel faults, its main fault is named as Selaha—Kangding fault, which distributes along Jinlongsi, Sehala, Mugecuo and Kangding. Yalahe fault, located at the NE direction of the main fault, and Zeduotang fault, located at the SW direction of the main fault, are all secondary faults, which are 9～13km away from the main fault. At the south of Kangding, the segment of Xianshuihe fault is a single main section, called as Moxi fault. On the basis of recent researching results, this paper mainly discusses the slip rate and recurrence interval of strong earthquake of the SE segment (Qianning—Kangding) on Xianshuihe.
文摘This paper addressed the international transferring t endency of manufacturing industry one by one as follows: (1) The developed count ries realize manufacturing industry structure upgrade reling on worldwide tr ansference not only domestic transference. On one hand, the TNCs make cross-inv estments, transnational merger & acquisition so as to achieve the optimum colloc ation of R&D resources, and obtain innovation in knowledge and technology. On th e other hand, the developed countries transfer labor and resource intensive indu stry as well as the labor-intensive link of the production chain in highly tech nology industry to the developing countries, to make their industrial structure escalation. (2) The adjustment and upgrade of manufacturing industry presents "m ulti-step type". First, the object of international transference substitutes th e capital-intensive industry and maturing industry with complicate technique fo r the industry with labor-intensive, simple technique or higher pollution, or s ubstitutes non-core complex technological procedure and parts and components fo r assembly in manufacturing process. Secondly, technology transference forms "br ain-hand and foot" pattern, i.e. the developed countries are increasingly p aying more and more attention to the research and control of core technology, th us transferring simple technique and labor-intensive procedure in higher scienc e and technology. Thirdly, the developed countries begins to transfer both capit al and technology intensive production, as well as transfer certain procedures i n higher technology production process to a few developing countries, even t o transfer parts of R & D to developing countries. (3) TNCs promote the global m anufacturing network (GMN) by recombination and transfer. TNCs organize producti on, trade, technological research and transference through foreign direct invest ment (FDI) all over the world, as a result, GMN makes the national competence no longer depend on absolute occupation of certain industries, but on national com prehensive strength and comparative superiority. TNCs try to race to seize the h igher location of industrial value chain, only leaving the core technology and h igher value-added chains in mother countries, on the other hand, they transfer lower manufacturing power more and more to other countries. (4) TNCs transfer th eir domestic manufacturing bases abroad, China would become world- manufacturin g center. Chinese market is increasingly arousing foreign investor’s interest, " Made in China" will be a synonym of manufacturing industry in new century, subst ituting for "Made in U.S.", "Made in Japanese" and "Made in Europe". The Chinese manufacturing industry should hold tightly the opportunity to melt into the wor ldwide recombination and transfer and enter GMN, so as to accomplish leaping dev elopment.
