Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the t...Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.展开更多
Surface textures had long been recognized as primary factors to provide the skid resistance on pavements; however, no measurement of skid resistance on pervious concrete pavement with various surface texture parameter...Surface textures had long been recognized as primary factors to provide the skid resistance on pavements; however, no measurement of skid resistance on pervious concrete pavement with various surface texture parameters had been made. Fractal geometry was introduced in the present work to accurately simulate transect contour curves of pervious concrete specimens through fractal interpolation. It is proved that its fractal dimension (D) can be adopted to measure the skid resistance on pervious concrete pavement, overcoming the shortcomings of both macrotexture depth (DT ) and British portable pendulum number (NBP). Combined with Fujikawa-Koike tire/road contact model, the optimization method of all surface textures was recommended for designing and constructing excellently skid-resistant and noise-absorptive pervious concrete pavement. In addition, evaluating of the abrasion process and attenuation of the surface textures on concrete pavement slabs was also the focus of this work based on accelerated abrasion test. Results show that the surface textures on pervious concrete pavement slabs is extremely durable, compared to those on conventional grooved or exposed aggregate concrete pavement slabs.展开更多
The cooperative effect of laser surface texturing(LST) and double glow plasma surface alloying on tribological performance of lubricated sliding contacts was investigated.A Nd:YAG laser was used to generate microdimpl...The cooperative effect of laser surface texturing(LST) and double glow plasma surface alloying on tribological performance of lubricated sliding contacts was investigated.A Nd:YAG laser was used to generate microdimples on steel surfaces. Dimples with the diameter of 150μm and the depth of 30-35μm distributed circumferentially on the disc surface.The alloying element Cr was sputtered to the laser texturing steel surface by double glow plasma technique.A deep diffusion layer with a thickness of 30μm and a high hardness of HV900 was formed in this alloy.Tribological experiments of three types of samples(smooth,texturing and texturing+alloying) were conducted with a ring-on-disc tribometer to simulate the face seal.It is found that,in comparison with smooth steel surfaces,the laser texturing samples significantly reduce the friction coefficient.Moreover,the lower wear rate of the sample treated with the two surface techniques is observed.展开更多
Chrome steels are used in bearings since they possess high strength and wear resistance.However,when those parts are in service,failure happens due to sliding friction before the lifetime.To improve the durability of ...Chrome steels are used in bearings since they possess high strength and wear resistance.However,when those parts are in service,failure happens due to sliding friction before the lifetime.To improve the durability of the American Iron and Steel Institute(AISI)52100 chromium steel,in this work,the effect of laser surface texturing(LST)was analyzed.With the different patterns of circle and ellipse comparing with the untextured samples,the wear behavior was investigated using the pin-on-disc tribometer.The lubricant used for wear analysis is semisolid lithium grease National Lubricating Grease Institute lubricant(SKF NLGI-3).Sliding wear analysis was conducted at different loads of 10 N,30 N and 50 N for the sliding speed of 750 r/min and 1400 r/min.The wear morphology was analyzed using a scanning electron microscope(SEM).The roughness of the samples was found using a white light interferometer.The effect of different patterns like circle and ellipse,alter the friction and wear properties of chromium alloy was observed compared with the untextured samples.LST shows considerable reduction in friction and wear for ellipsoidal pattern compared with the circular pattern because of wear debris and lubricant getting trapped.展开更多
A pulsed,picosecond Nd:YAG laser with a wavelength of 532 nm is used to texture the surface of grade 5 titanium alloy(Ti–6Al–4V)for minimizing its wear rate.The wear properties of the base samples and laser surface ...A pulsed,picosecond Nd:YAG laser with a wavelength of 532 nm is used to texture the surface of grade 5 titanium alloy(Ti–6Al–4V)for minimizing its wear rate.The wear properties of the base samples and laser surface textured samples are analyzed by conducting wear tests under a sliding condition using pin-on-disk equipment.The wear tests are conducted based on the Box–Benhken design,and the interaction of the process parameters is analyzed using response surface methodology.The wear analysis is conducted by varying the load,rotating speed of the disc,and track diameter at room temperature with a sliding distance of 1500 m.The results demonstrate that the laser textured surfaces exhibited a lower coefficient of friction and good anti-wear properties as compared with the non-textured surfaces.A regression model is developed for the wear analysis of titanium alloy using the analysis of variance technique.It is also observed from the analysis that the applied load and sliding distance are the parameters that have the greatest effect on the wear behavior followed by the wear track diameter.The optimum operating conditions have been suggested based on the results obtained from the numerical optimization approach.展开更多
Three kinds of aggregates were polished by genuine pneumatic rubber tyres.The initial states of surface texture and dynamic friction coefficient were measured and their developments in polishing process were monitored...Three kinds of aggregates were polished by genuine pneumatic rubber tyres.The initial states of surface texture and dynamic friction coefficient were measured and their developments in polishing process were monitored.The characterizations of height distribution and power spectral density of aggregate surface texture were estimated.The changes of micro-texture were also investigated based on a fractal filtering method with sound theoretical backgrounds of rubber friction on rough surfaces.Global height reduction and differential removal of mineral component are observed in polishing process.It is concluded that the tyre-polishing action plays the critical roles in the micro-scale texture,and the evolution of friction of aggregate is governed by the micro-texture changes due to the differential removal of mineral component.展开更多
The intermediate layer was prepared by nickel doped with WC particles electroplating.The parameters,including current density and temperature,were studied.The measured methods,which consisted of surface roughometer an...The intermediate layer was prepared by nickel doped with WC particles electroplating.The parameters,including current density and temperature,were studied.The measured methods,which consisted of surface roughometer and SEM,were used to character the roughness and micrograph.Based on the results,it was shown that the optimized parameters of the composite were as follows,temperature 65 ℃,current density 5 A/dm2 and pH 6.5.In the range of optimized parameters,the roughness Ra was from 4.5 to 6.7 μm.From the SEM micrograph,the particles on the surface were well distributed.The nickel content,which affected the binding force,was determined by the electroplating time.展开更多
Hydroplaning speed can be affected by pavement texture depth,thickness of water film,tire pressure and tread depth.In this study,to understand the influence of pavement texture on the hydroplaning speed,a new lab-scal...Hydroplaning speed can be affected by pavement texture depth,thickness of water film,tire pressure and tread depth.In this study,to understand the influence of pavement texture on the hydroplaning speed,a new lab-scale apparatus has been designed and manufactured.The lack of proportion between linear movement of vehicle shaft and the wheel rotation was found to be a good index to determine hydroplaning threshold.A 5%drop in the ratio of wheel-to-axle rotation has been assumed as an index to determine hydroplaning threshold.Based on the measures,a simplified model was developed that is able to predict the hydroplaning speed depending on pavement's texture characteristics.The results indicated that a 77%increase in mean texture depth cause 9%increase in hydroplaning threshold speed.展开更多
基金Project(51975169)supported by the National Natural Science Foundation of ChinaProject(LH2022E085)supported by the Natural Science Foundation of Heilongjiang Province,China。
文摘Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.
基金Project(kfj080205) supported by Key Laboratory of Road Structure and Material of Ministry of Transport of Changsha, China
文摘Surface textures had long been recognized as primary factors to provide the skid resistance on pavements; however, no measurement of skid resistance on pervious concrete pavement with various surface texture parameters had been made. Fractal geometry was introduced in the present work to accurately simulate transect contour curves of pervious concrete specimens through fractal interpolation. It is proved that its fractal dimension (D) can be adopted to measure the skid resistance on pervious concrete pavement, overcoming the shortcomings of both macrotexture depth (DT ) and British portable pendulum number (NBP). Combined with Fujikawa-Koike tire/road contact model, the optimization method of all surface textures was recommended for designing and constructing excellently skid-resistant and noise-absorptive pervious concrete pavement. In addition, evaluating of the abrasion process and attenuation of the surface textures on concrete pavement slabs was also the focus of this work based on accelerated abrasion test. Results show that the surface textures on pervious concrete pavement slabs is extremely durable, compared to those on conventional grooved or exposed aggregate concrete pavement slabs.
基金Project(2007046) supported by High Technology Research Project of Jiangsu Province,China
文摘The cooperative effect of laser surface texturing(LST) and double glow plasma surface alloying on tribological performance of lubricated sliding contacts was investigated.A Nd:YAG laser was used to generate microdimples on steel surfaces. Dimples with the diameter of 150μm and the depth of 30-35μm distributed circumferentially on the disc surface.The alloying element Cr was sputtered to the laser texturing steel surface by double glow plasma technique.A deep diffusion layer with a thickness of 30μm and a high hardness of HV900 was formed in this alloy.Tribological experiments of three types of samples(smooth,texturing and texturing+alloying) were conducted with a ring-on-disc tribometer to simulate the face seal.It is found that,in comparison with smooth steel surfaces,the laser texturing samples significantly reduce the friction coefficient.Moreover,the lower wear rate of the sample treated with the two surface techniques is observed.
文摘Chrome steels are used in bearings since they possess high strength and wear resistance.However,when those parts are in service,failure happens due to sliding friction before the lifetime.To improve the durability of the American Iron and Steel Institute(AISI)52100 chromium steel,in this work,the effect of laser surface texturing(LST)was analyzed.With the different patterns of circle and ellipse comparing with the untextured samples,the wear behavior was investigated using the pin-on-disc tribometer.The lubricant used for wear analysis is semisolid lithium grease National Lubricating Grease Institute lubricant(SKF NLGI-3).Sliding wear analysis was conducted at different loads of 10 N,30 N and 50 N for the sliding speed of 750 r/min and 1400 r/min.The wear morphology was analyzed using a scanning electron microscope(SEM).The roughness of the samples was found using a white light interferometer.The effect of different patterns like circle and ellipse,alter the friction and wear properties of chromium alloy was observed compared with the untextured samples.LST shows considerable reduction in friction and wear for ellipsoidal pattern compared with the circular pattern because of wear debris and lubricant getting trapped.
基金SASTRA University for the valuable help and support provided
文摘A pulsed,picosecond Nd:YAG laser with a wavelength of 532 nm is used to texture the surface of grade 5 titanium alloy(Ti–6Al–4V)for minimizing its wear rate.The wear properties of the base samples and laser surface textured samples are analyzed by conducting wear tests under a sliding condition using pin-on-disk equipment.The wear tests are conducted based on the Box–Benhken design,and the interaction of the process parameters is analyzed using response surface methodology.The wear analysis is conducted by varying the load,rotating speed of the disc,and track diameter at room temperature with a sliding distance of 1500 m.The results demonstrate that the laser textured surfaces exhibited a lower coefficient of friction and good anti-wear properties as compared with the non-textured surfaces.A regression model is developed for the wear analysis of titanium alloy using the analysis of variance technique.It is also observed from the analysis that the applied load and sliding distance are the parameters that have the greatest effect on the wear behavior followed by the wear track diameter.The optimum operating conditions have been suggested based on the results obtained from the numerical optimization approach.
基金Project(50809053) supported by the National Natural Science Foundation of ChinaProject(FE 04.208/2007/CRB) funded by Federal Highway Research Institute (Bast),Germany
文摘Three kinds of aggregates were polished by genuine pneumatic rubber tyres.The initial states of surface texture and dynamic friction coefficient were measured and their developments in polishing process were monitored.The characterizations of height distribution and power spectral density of aggregate surface texture were estimated.The changes of micro-texture were also investigated based on a fractal filtering method with sound theoretical backgrounds of rubber friction on rough surfaces.Global height reduction and differential removal of mineral component are observed in polishing process.It is concluded that the tyre-polishing action plays the critical roles in the micro-scale texture,and the evolution of friction of aggregate is governed by the micro-texture changes due to the differential removal of mineral component.
文摘The intermediate layer was prepared by nickel doped with WC particles electroplating.The parameters,including current density and temperature,were studied.The measured methods,which consisted of surface roughometer and SEM,were used to character the roughness and micrograph.Based on the results,it was shown that the optimized parameters of the composite were as follows,temperature 65 ℃,current density 5 A/dm2 and pH 6.5.In the range of optimized parameters,the roughness Ra was from 4.5 to 6.7 μm.From the SEM micrograph,the particles on the surface were well distributed.The nickel content,which affected the binding force,was determined by the electroplating time.
文摘Hydroplaning speed can be affected by pavement texture depth,thickness of water film,tire pressure and tread depth.In this study,to understand the influence of pavement texture on the hydroplaning speed,a new lab-scale apparatus has been designed and manufactured.The lack of proportion between linear movement of vehicle shaft and the wheel rotation was found to be a good index to determine hydroplaning threshold.A 5%drop in the ratio of wheel-to-axle rotation has been assumed as an index to determine hydroplaning threshold.Based on the measures,a simplified model was developed that is able to predict the hydroplaning speed depending on pavement's texture characteristics.The results indicated that a 77%increase in mean texture depth cause 9%increase in hydroplaning threshold speed.
