Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose ch...Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose challenges in prac-tical applications.To improve the conventional FMEA,many modified FMEA models have been suggested.However,the majority of them inadequately address consensus issues and focus on achieving a complete ranking of failure modes.In this research,we propose a new FMEA approach that integrates a two-stage consensus reaching model and a density peak clus-tering algorithm for the assessment and clustering of failure modes.Firstly,we employ the interval 2-tuple linguistic vari-ables(I2TLVs)to express the uncertain risk evaluations provided by FMEA experts.Then,a two-stage consensus reaching model is adopted to enable FMEA experts to reach a consensus.Next,failure modes are categorized into several risk clusters using a density peak clustering algorithm.Finally,the proposed FMEA is illustrated by a case study of load-bearing guidance devices of subway systems.The results show that the proposed FMEA model can more easily to describe the uncertain risk information of failure modes by using the I2TLVs;the introduction of an endogenous feedback mechanism and an exogenous feedback mechanism can accelerate the process of consensus reaching;and the density peak clustering of failure modes successfully improves the practical applicability of FMEA.展开更多
According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferen...According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferences and the consistency of expert＇s collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts＇ weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.展开更多
For the first time, we used Tullgren method made a study on vertical migrating and cluster analysis of the soil mesofauna in Dongying Halophytes Garden in the Yellow River Delta （YRD）, Shandong Province. The results...For the first time, we used Tullgren method made a study on vertical migrating and cluster analysis of the soil mesofauna in Dongying Halophytes Garden in the Yellow River Delta （YRD）, Shandong Province. The results showed that the soil mesofauna tended to gather on soil surface in most samples at most times, but the vertical migrating greatly varied in different seasons or environment conditions. Acari was the dominant group. The index of diversity of the soil fauna was correlated with the index of evenness. The Acari＇s number of individuals infected other species and numbers. Dominant group-Aeari made greater contribution to the result of cluster analysis, and there were significant differences between communities in different habitats by cluster analysis with both Bray-Curtis and Jaccard similarity coefficient.展开更多
Correlation and path coefficient analyses were conducted for 10 characteristics of 24 pure lines of flue-cured tobacco such as plant height, knot distance, leaf number, the central leaf length and width, ratio of the ...Correlation and path coefficient analyses were conducted for 10 characteristics of 24 pure lines of flue-cured tobacco such as plant height, knot distance, leaf number, the central leaf length and width, ratio of the length to width, stem girth, dates of budding, leaf yield and ratio of the prime-medium tobacco. The leaf number and the central leaf length showed a positive or a strong positive correlation with the yield per plant. And the leaf number and leaf yield per plant showed a strong positive correlation with the ratio of prime-medium tobacco. The results showed that the leaf yield per plant among these characteristics played a major role in determining the ratio of prime-medium tobacco while the others were less related with the ratio. Square sum of deviation method cluster analyses showed that 24 pure lines of flue-cured tobacco were clustered into two groups. Of the pure lines, Line T1706 and Line T1245 had a far relationship with all other lines, and also had a heterosis when crossed with the other lines. Lines Guangdonghuang 1 and R72（3）B-2-1 were closely related.展开更多
The sustainable development of private university has become the focus of the academia and the private higher education after an approximately golden period.Through the method of literature review and cluster analysis...The sustainable development of private university has become the focus of the academia and the private higher education after an approximately golden period.Through the method of literature review and cluster analysis,this paper studies the concept of sustainable development of private university from the perspective of the connotation definition and epitaxial recognition,in order to effectively reveal the essence of the sustainable development of private university,hoping to provide some certain support for the theory and practice of sustainable development of private university.展开更多
The thermal-induced error is a very important sour ce of machining errors of machine tools. To compensate the thermal-induced machin ing errors, a relationship model between the thermal field and deformations was need...The thermal-induced error is a very important sour ce of machining errors of machine tools. To compensate the thermal-induced machin ing errors, a relationship model between the thermal field and deformations was needed. The relationship can be deduced by virtual of FEM (Finite Element Method ), ANN (Artificial Neural Network) or MRA (Multiple Regression Analysis). MR A is on the basis of a total understanding of the temperature distribution of th e machine tool. Although the more the temperatures measured are, the more accura te the MRA is, too more temperatures will hinder the analysis calculation. So it is necessary to identify the key temperatures of the machine tool. The selectio n of key temperatures decides the efficiency and precision of MRA. Because of th e complexities and multi-input and multi-output structure of the relationships , the exact quantitative portions as well as the unclear portions must be taken into consideration together to improve the identification of key temperatures. I n this paper, a fuzzy cluster analysis was used to select the key temperatures. The substance of identifying the key temperatures is to group all temperatures b y their relativity, and then to select a temperature from each group as the repr esentation. A fuzzy cluster analysis can uncover the relationships between t he thermal field and deformations more truly and thoroughly. A fuzzy cluster ana lysis is the cluster analysis based on fuzzy sets. Given U={u i|i=0,...,N}, in which u i is the temperature measured, a fuzzy matrix R can be obta ined. The transfer close package t(R) can be deduced from R. A fuzzy clu ster of U then conducts on the basis of t(R). Based on the fuzzy cluster analysis discussed above, this paper identified the k ey temperatures of a horizontal machining center. The number of the temperatures measured was reduced to 4 from 32, and then the multiple regression relationshi p models between the 4 temperatures and the thermal deformations of the spindle were drawn. The remnant errors between the regression models and measured deform ations reached a satisfying low level. At the same time, the decreasing of tempe rature variable number improved the efficiency of measure and analysis greatly.展开更多
The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development o...The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development of real-time communication networks,the black-start decision-makers are no longer limited to only one or a few power system experts such as dispatchers,but rather a large group of professional people in practice.The overall behaviors of a large decision-making group of decision-makers/experts are more complicated and unpredictable.However,the existing methods for black-start decision-making cannot handle the situations with a large group of decision-makers.Given this background,a clustering algorithm is presented to optimize the black-start decision-making problem with a large group of decision-makers.Group decision-making preferences are obtained by clustering analysis,and the final black-start decision-making results are achieved by combining the weights of black-start indexes and the preferences of the decision-making group.The effectiveness of the proposed method is validated by a practical case.This work extends the black-start decision-making problem to situations with a large group of decision-makers.展开更多
In this study, we used RAPD to analyze four kinds of color-flowered Salvia splendens Ker-Gawl, and the optimal RAPD reaction conditions were the optimal reaction mixture （25 μL total volume） that contained 2.0 μL ...In this study, we used RAPD to analyze four kinds of color-flowered Salvia splendens Ker-Gawl, and the optimal RAPD reaction conditions were the optimal reaction mixture （25 μL total volume） that contained 2.0 μL 10×buffer, 0.45 mmol·L^-1 dNTPs, 2.0 mmol· L^-1 Mg^2＋, 2 U Taq DNA polymerase, 0.30 umol·L^-2 primer and 40 ng genomic DNA. Total 84 bands were amplified from 12 primers used, and the differential bands had 28 bands, which was 33% of total bands. In cluster group analysis, the four kinds of color-flowered were divided into two styles. One style is that the red color and red-white color were grouped together, then they grouped with purple color into one cluster, and the white color was another style.展开更多
In the study,the reasonable sampling of the grey Aneurolepidium chinense of green grassland,the grey-green A.chinense of green grassland,the grey A.chinense of Wulimu and the grey-green A.chinense of Wulimu were analy...In the study,the reasonable sampling of the grey Aneurolepidium chinense of green grassland,the grey-green A.chinense of green grassland,the grey A.chinense of Wulimu and the grey-green A.chinense of Wulimu were analyzed by ISSR.Eight primers with clear and diverse products were screened out from 20 primers and 47 DNA fragments were amplified from 39 individuals.The average number of DNA fragments produced by each primer was 5.9,and polymorphic bands were 41 and the polymorphic rate was 87.23%,which could r...展开更多
Cables that have been in service for over 20 years in Shanghai, a city with abundant surface water, failed more frequently and induced different cable accidents. This necessitates researches on the insulation aging st...Cables that have been in service for over 20 years in Shanghai, a city with abundant surface water, failed more frequently and induced different cable accidents. This necessitates researches on the insulation aging state of cables working in special circumstances. We performed multi-parameter tests with samples from about 300 cable lines in Shanghai. The tests included water tree investigation, tensile test, dielectric spectroscopy test, thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), and electrical aging test. Then, we carried out regression analysis between every two test parameters. Moreover, through two-sample t-Test and analysis of va- riance (ANOVA) of each test parameter, we analyzed the influences of cable-laying method and sampling section on the degradation of cable insulation respectively. Furthermore, the test parameters which have strong correlation in the regression analysis or significant differ- ences in the t-Test or ANOVA analysis were determined to be the ones identifying the XLPE cable insulation aging state. The thresholds for distinguishing insulation aging states had been also obtained with the aid of statistical analysis and fuzzy clustering. Based on the fuzzy in- ference, we established a cable insulation aging diagnosis model using the intensity transfer method. The results of regression analysis indicate that the degradation of cable insulation accelerates as the degree of in-service aging increases. This validates the rule that the in- crease of microscopic imperfections in solid material enhances the dielectric breakdown strength. The results of the two-sample t-Test and the ANOVA indicate that the direct-buried cables are more sensitive to insulation degradation than duct cables. This confirms that the tensile strength and breakdown strength are reliable functional parameters in cable insulation evaluations. A case study further indicates that the proposed diagnosis model based on the fuzzy inference can reflect the comprehensive aging state of cable insulation well, and that the cable service time has no correlation with the insulation aging state.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(22120240094)Humanities and Social Science Fund of Ministry of Education China(22YJA630082).
文摘Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose challenges in prac-tical applications.To improve the conventional FMEA,many modified FMEA models have been suggested.However,the majority of them inadequately address consensus issues and focus on achieving a complete ranking of failure modes.In this research,we propose a new FMEA approach that integrates a two-stage consensus reaching model and a density peak clus-tering algorithm for the assessment and clustering of failure modes.Firstly,we employ the interval 2-tuple linguistic vari-ables(I2TLVs)to express the uncertain risk evaluations provided by FMEA experts.Then,a two-stage consensus reaching model is adopted to enable FMEA experts to reach a consensus.Next,failure modes are categorized into several risk clusters using a density peak clustering algorithm.Finally,the proposed FMEA is illustrated by a case study of load-bearing guidance devices of subway systems.The results show that the proposed FMEA model can more easily to describe the uncertain risk information of failure modes by using the I2TLVs;the introduction of an endogenous feedback mechanism and an exogenous feedback mechanism can accelerate the process of consensus reaching;and the density peak clustering of failure modes successfully improves the practical applicability of FMEA.
文摘According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferences and the consistency of expert＇s collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts＇ weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.
基金Supported by the Doctoral Fund of Northeast Agricultural University(2009RC41)Postdoctoral Grants of Heilongjiang Province(LBH-Z10265)
文摘For the first time, we used Tullgren method made a study on vertical migrating and cluster analysis of the soil mesofauna in Dongying Halophytes Garden in the Yellow River Delta （YRD）, Shandong Province. The results showed that the soil mesofauna tended to gather on soil surface in most samples at most times, but the vertical migrating greatly varied in different seasons or environment conditions. Acari was the dominant group. The index of diversity of the soil fauna was correlated with the index of evenness. The Acari＇s number of individuals infected other species and numbers. Dominant group-Aeari made greater contribution to the result of cluster analysis, and there were significant differences between communities in different habitats by cluster analysis with both Bray-Curtis and Jaccard similarity coefficient.
基金Supported by Platform Construction for Germplasm Resources of China Tobacco (2007, 152)
文摘Correlation and path coefficient analyses were conducted for 10 characteristics of 24 pure lines of flue-cured tobacco such as plant height, knot distance, leaf number, the central leaf length and width, ratio of the length to width, stem girth, dates of budding, leaf yield and ratio of the prime-medium tobacco. The leaf number and the central leaf length showed a positive or a strong positive correlation with the yield per plant. And the leaf number and leaf yield per plant showed a strong positive correlation with the ratio of prime-medium tobacco. The results showed that the leaf yield per plant among these characteristics played a major role in determining the ratio of prime-medium tobacco while the others were less related with the ratio. Square sum of deviation method cluster analyses showed that 24 pure lines of flue-cured tobacco were clustered into two groups. Of the pure lines, Line T1706 and Line T1245 had a far relationship with all other lines, and also had a heterosis when crossed with the other lines. Lines Guangdonghuang 1 and R72（3）B-2-1 were closely related.
基金the phased achievement of the key project of 12th Five-Year Plan of the National Education Sciences"The Study of Distribution and Influential Factors of Private University in China"(NO.DFA140218)the key project of soft science research of Sichuan"Sustainable Development and the Construction of Dynamic Mechanism and Assessment System of Private University"(NO.2013RZB01009)
文摘The sustainable development of private university has become the focus of the academia and the private higher education after an approximately golden period.Through the method of literature review and cluster analysis,this paper studies the concept of sustainable development of private university from the perspective of the connotation definition and epitaxial recognition,in order to effectively reveal the essence of the sustainable development of private university,hoping to provide some certain support for the theory and practice of sustainable development of private university.
文摘The thermal-induced error is a very important sour ce of machining errors of machine tools. To compensate the thermal-induced machin ing errors, a relationship model between the thermal field and deformations was needed. The relationship can be deduced by virtual of FEM (Finite Element Method ), ANN (Artificial Neural Network) or MRA (Multiple Regression Analysis). MR A is on the basis of a total understanding of the temperature distribution of th e machine tool. Although the more the temperatures measured are, the more accura te the MRA is, too more temperatures will hinder the analysis calculation. So it is necessary to identify the key temperatures of the machine tool. The selectio n of key temperatures decides the efficiency and precision of MRA. Because of th e complexities and multi-input and multi-output structure of the relationships , the exact quantitative portions as well as the unclear portions must be taken into consideration together to improve the identification of key temperatures. I n this paper, a fuzzy cluster analysis was used to select the key temperatures. The substance of identifying the key temperatures is to group all temperatures b y their relativity, and then to select a temperature from each group as the repr esentation. A fuzzy cluster analysis can uncover the relationships between t he thermal field and deformations more truly and thoroughly. A fuzzy cluster ana lysis is the cluster analysis based on fuzzy sets. Given U={u i|i=0,...,N}, in which u i is the temperature measured, a fuzzy matrix R can be obta ined. The transfer close package t(R) can be deduced from R. A fuzzy clu ster of U then conducts on the basis of t(R). Based on the fuzzy cluster analysis discussed above, this paper identified the k ey temperatures of a horizontal machining center. The number of the temperatures measured was reduced to 4 from 32, and then the multiple regression relationshi p models between the 4 temperatures and the thermal deformations of the spindle were drawn. The remnant errors between the regression models and measured deform ations reached a satisfying low level. At the same time, the decreasing of tempe rature variable number improved the efficiency of measure and analysis greatly.
基金supported by National Natural Science Foundation of China (No.51007080)National High Technology Research and Development Program of China (863 Program) (No.2011AA05A105)+1 种基金the Fundamental Research Funds for the Central Universities (No.2012QNA4011)key project from Zhejiang Electric Power Corporation
文摘The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development of real-time communication networks,the black-start decision-makers are no longer limited to only one or a few power system experts such as dispatchers,but rather a large group of professional people in practice.The overall behaviors of a large decision-making group of decision-makers/experts are more complicated and unpredictable.However,the existing methods for black-start decision-making cannot handle the situations with a large group of decision-makers.Given this background,a clustering algorithm is presented to optimize the black-start decision-making problem with a large group of decision-makers.Group decision-making preferences are obtained by clustering analysis,and the final black-start decision-making results are achieved by combining the weights of black-start indexes and the preferences of the decision-making group.The effectiveness of the proposed method is validated by a practical case.This work extends the black-start decision-making problem to situations with a large group of decision-makers.
文摘In this study, we used RAPD to analyze four kinds of color-flowered Salvia splendens Ker-Gawl, and the optimal RAPD reaction conditions were the optimal reaction mixture （25 μL total volume） that contained 2.0 μL 10×buffer, 0.45 mmol·L^-1 dNTPs, 2.0 mmol· L^-1 Mg^2＋, 2 U Taq DNA polymerase, 0.30 umol·L^-2 primer and 40 ng genomic DNA. Total 84 bands were amplified from 12 primers used, and the differential bands had 28 bands, which was 33% of total bands. In cluster group analysis, the four kinds of color-flowered were divided into two styles. One style is that the red color and red-white color were grouped together, then they grouped with purple color into one cluster, and the white color was another style.
文摘In the study,the reasonable sampling of the grey Aneurolepidium chinense of green grassland,the grey-green A.chinense of green grassland,the grey A.chinense of Wulimu and the grey-green A.chinense of Wulimu were analyzed by ISSR.Eight primers with clear and diverse products were screened out from 20 primers and 47 DNA fragments were amplified from 39 individuals.The average number of DNA fragments produced by each primer was 5.9,and polymorphic bands were 41 and the polymorphic rate was 87.23%,which could r...
基金Project supported by National Natural Science Foundation of China（51277117）, Shang- hai Science and Technology Comrmssion（11 DZ2283000）.
文摘Cables that have been in service for over 20 years in Shanghai, a city with abundant surface water, failed more frequently and induced different cable accidents. This necessitates researches on the insulation aging state of cables working in special circumstances. We performed multi-parameter tests with samples from about 300 cable lines in Shanghai. The tests included water tree investigation, tensile test, dielectric spectroscopy test, thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), and electrical aging test. Then, we carried out regression analysis between every two test parameters. Moreover, through two-sample t-Test and analysis of va- riance (ANOVA) of each test parameter, we analyzed the influences of cable-laying method and sampling section on the degradation of cable insulation respectively. Furthermore, the test parameters which have strong correlation in the regression analysis or significant differ- ences in the t-Test or ANOVA analysis were determined to be the ones identifying the XLPE cable insulation aging state. The thresholds for distinguishing insulation aging states had been also obtained with the aid of statistical analysis and fuzzy clustering. Based on the fuzzy in- ference, we established a cable insulation aging diagnosis model using the intensity transfer method. The results of regression analysis indicate that the degradation of cable insulation accelerates as the degree of in-service aging increases. This validates the rule that the in- crease of microscopic imperfections in solid material enhances the dielectric breakdown strength. The results of the two-sample t-Test and the ANOVA indicate that the direct-buried cables are more sensitive to insulation degradation than duct cables. This confirms that the tensile strength and breakdown strength are reliable functional parameters in cable insulation evaluations. A case study further indicates that the proposed diagnosis model based on the fuzzy inference can reflect the comprehensive aging state of cable insulation well, and that the cable service time has no correlation with the insulation aging state.
