Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450...Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.展开更多
The orientation effect of θʹ precipitates in stress-aged Al-Cu alloys has ambiguous interpretations. One view is that θʹ precipitates prefer to grow on the habit planes perpendicular to the applied compressive stres...The orientation effect of θʹ precipitates in stress-aged Al-Cu alloys has ambiguous interpretations. One view is that θʹ precipitates prefer to grow on the habit planes perpendicular to the applied compressive stress, while the other view suggests growth on habit planes parallel to the applied stress. In this study, stress-aged Al-4 wt.%Cu single crystal was sampled from three different <100>Al zone axes to observe the distribution of θʹ precipitates. A hybrid Monte-Carlo/ molecular dynamics simulations were used to investigate the orientation effect of θʹ precipitates. The simulation results are consistent with experimental observations and indicate that θʹ precipitates prefer to grow on the habit planes that are parallel to the direction of the applied compressive stress, not along the planes perpendicular to it. It is also found that 1/2<110> perfect dislocations are generated as θʹ precipitates plates grow thicker, and the reaction of 1/2<110> perfect dislocations decomposing into 1/6<112> Shockley dislocations lead to an increase in the length of θʹ precipitates. The former does not enhance the orientation effect, whereas the latter leads to a more significant orientation effect. Additionally, the degree of the orientation effect of θʹ precipitates is determined by the reduction of 1/2<110> dislocations with a positive correlation between them.展开更多
The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formabilit...The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formability of Al-Cu-Li alloy is vital.A thorough comparison of the effects of cryo-deformation and ambient temperature large pre-deformation(LPD)on the creep ageing response in the 2195 alloy sheet at 160℃with different stresses has been made.The evolution of dislocations and precipitates during creep ageing of LPD alloys are revealed by X-ray diffraction and transmission electron microscopy.High-quality 2195 alloy sheet largely pre-deformed by 80%without edge-cracking is obtained by cryo-rolling at liquid nitrogen temperature,while severe edge-cracking occurs during room temperature rolling.The creep formability and strength of the 2195 alloy are both enhanced by introducing pre-existing dislocations with a density over 1.4×10^(15)m^(−2).At 160℃and 150 MPa,creep strain and creep-aged strength generally increases by 4−6 times and 30−50 MPa in the LPD sample,respectively,compared to conventional T3 alloy counterpart.The elongation of creep-aged LPD sample is low but remains relevant for application.The high-density dislocations,though existing in the form of dislocation tangles,promote the formation of refined T1 precipitates with a uniform dispersion.展开更多
A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of ...A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.展开更多
The microstructure evolution of 7A85 aluminum alloy at the conditions of strain rate(0.001−1 s^(−1))and deformation temperature(250−450°C)was studied by optical microscopy(OM)and electron back scattering diffract...The microstructure evolution of 7A85 aluminum alloy at the conditions of strain rate(0.001−1 s^(−1))and deformation temperature(250−450°C)was studied by optical microscopy(OM)and electron back scattering diffraction(EBSD).Based on the K-M dislocation density model,a two-stage K-M dislocation density model of 7A85 aluminum alloy was established.The results reveal that dynamic recovery(DRV)and dynamic recrystallization(DRX)are the main mechanisms of microstructure evolution during thermal deformation of 7A85 aluminum alloy.350−400°C is the transformation zone from dynamic recovery to dynamic recrystallization.At low temperature(≤350°C),DRV is the main mechanism,while DRX mostly occurs at high temperature(≥400°C).At this point,the sensitivity of microstructure evolution to temperature is relatively high.As the temperature increased,the average misorientation angle(θˉ_(c))increased significantly,ranging from 0.93°to 7.13°.Meanwhile,the f_(LAGBs) decreased with the highest decrease of 24%.展开更多
Based on the Biot＇s theory about two-phase saturated medium, according to the character of δ function, the Green function on two-phase saturated medium by the point source under concentrated force can be derived. By...Based on the Biot＇s theory about two-phase saturated medium, according to the character of δ function, the Green function on two-phase saturated medium by the point source under concentrated force can be derived. By the Betti＇s theorem for the two-phase saturated medium field, the source vector and static displacement field by elastic dislocation on the two-phase saturated medium were comprehensively discussed.展开更多
The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT...The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT and NABARRO's model. The influence of interface stresses on the critical shear stress was examined. The result indicates that, if the volume fraction of the core-shell nanowires keeps a constant, an optimal critical shear stress may be obtained when the radius of the nanowire with interface stresses reaches a critical value, which differs from the classical solution without considering the interface stresses under the same external conditions. In addition, the material may be strengthened by the soft nanowires when the interface stresses are considered. There also exist critical values of the elastic modulus and the thickness of surface coating to alter the strengthening effect produced by it.展开更多
This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter mod...This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter model,STAP performance is then analyzed from the perspective of covariance matrix tapering（CMT）.For STAP performance degradation due to array rotation,a determinate compensation method is proposed based on the CMT method.Numerical examples are provided to verify the analysis and the proposed compensation method.展开更多
In non-homogeneous environment, traditional space-time adaptive processing doesn＇t effectively suppress interference and detect target, because the secondary data don＇ t exactly reflect the statistical characteristi...In non-homogeneous environment, traditional space-time adaptive processing doesn＇t effectively suppress interference and detect target, because the secondary data don＇ t exactly reflect the statistical characteristic of the range cell under test. A ravel methodology utilizing the direct data domain approach to space-time adaptive processing （ STAP ） in airbome radar non-homogeneous environments is presented. The deterministic least squares adaptive signal processing technique operates on a ＂snapshot-by-snapshot＂ basis to dethrone the adaptive adaptive weights for nulling interferences and estimating signal of interest （SOI）. Furthermore, this approach eliminates the requirement for estimating the covariance through the data of neighboring range cell, which eliminates calculating the inverse of covariance, and can be implemented to operate in real-time. Simulation results illustrate the efficiency of interference suppression in non-homogeneous environment.展开更多
In various environmental studies, geoscience variables not only have the characteristics of time and space, but also are influenced by other variables. Multivariate spatiotemporal variables can improve the accuracy of...In various environmental studies, geoscience variables not only have the characteristics of time and space, but also are influenced by other variables. Multivariate spatiotemporal variables can improve the accuracy of spatiotemporal estimation. Taking the monthly mean ground observation data of the period 1960–2013 precipitation in the Xinjiang Uygur Autonomous Region, China, the spatiotemporal distribution from January to December in 2013 was respectively estimated by space-time Kriging and space-time CoKriging. Modeling spatiotemporal direct variograms and a cross variogram was a key step in space-time CoKriging. Taking the monthly mean air relative humidity of the same site at the same time as the covariates, the spatiotemporal direct variograms and the spatiotemporal cross variogram of the monthly mean precipitation for the period 1960–2013 were modeled. The experimental results show that the space-time CoKriging reduces the mean square error by 31.46% compared with the space-time ordinary Kriging. The correlation coefficient between the estimated values and the observed values of the space-time CoKriging is 5.07% higher than the one of the space-time ordinary Kriging. Therefore, a space-time CoKriging interpolation with air humidity as a covariate improves the interpolation accuracy.展开更多
Under dense urban fading environment, performance of joint multi-path parameter estimation method based on traditional point signal model degrades seriously. In this paper, a new space and time signal model based on m...Under dense urban fading environment, performance of joint multi-path parameter estimation method based on traditional point signal model degrades seriously. In this paper, a new space and time signal model based on multipath distribution function is given after new space and time manifold is reconstructed. Then joint spacetime signal subspace is obtained by converting acquired channel from time domain to frequency domain .Then space and time spectrum is formulated by the space sub-matrix and time sub-matrix taken out of joint space-time signal subspace, and parameters are estimated by searching the minimum eigenvalues of the space matrix and the time matrix. Lastly, A space and time parameters matching process is performed by using the orthogonal property between joint noise subspace and the space-time manifold. In contrast with tradition MUSIC, the algorithm we present here only need two 1- dimension searching and was not sensitive to different distribution function.展开更多
A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dis...A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dislocation and randomly distributed spherical dispersoids(Y2O3) in bcc iron was performed for measuring the influence of the dispersoid distribution on the critical resolved shear stress(CRSS). The dispersoid distribution was made using a method mimicking the Ostwald growth mechanism. Then, an edge dislocation was introduced, and was moved under a constant shear stress condition. The CRSS was extracted from the result of dislocation velocity under constant shear stress using the mobility(linear) relationship between the shear stress and the dislocation velocity. The results suggest that the dispersoid distribution gives a significant influence to the CRSS, and the influence of dislocation dipole, which forms just before finishing up the Orowan looping mechanism, is substantial in determining the CRSS, especially for the interaction with small dispersoids. Therefore, the well-known Orowan equation for determining the CRSS cannot give an accurate estimation, because the influence of the dislocation dipole in the process of the Orowan looping mechanism is not accounted for in the equation.展开更多
Using embedded atom method and molecular static relaxation method, the core structure of <100>, <110> edge dislocations, <100> screw dislocation, the interaction between point defects and <100>...Using embedded atom method and molecular static relaxation method, the core structure of <100>, <110> edge dislocations, <100> screw dislocation, the interaction between point defects and <100> edge dislocation in NiAl intermetallics were investigated. The results show that <100>edge dislocation expands along and orientation on the (001) slip plane. The core structure of <100> edge dislocation on (001) plane is like a 'butterfly', while it is very compact when it lies on {110} slip plane. So NiAl will have a <100>{110} slip system in stead of <100>{100} slip system, as experiments showed. <110> edge dislocation has a more expanded core structure and the atoms of dislocation core distort more heavily. None dislocation dissociation was found in the studied dislocations. The outlines of dislocation core structures change very little after a row of point defects are introduced in them, which can be explained by point defects' little effects on the stress field around dislocation core. The results also show that it is hard to change dislocation core structure by decreasing alloy order using the method of introducing limited point defects into the alloy.展开更多
By means of XRD, Instron electronic tensile machine and TEM, the dislocation states and strengthening mechanisms of SiC whisker reinforced pure aluminum matrix composites were studied with different annealing treatmen...By means of XRD, Instron electronic tensile machine and TEM, the dislocation states and strengthening mechanisms of SiC whisker reinforced pure aluminum matrix composites were studied with different annealing treatment processes and matrixes. The results showed that the strengthening mechanisms of SiC w/p Al composite and SiC w/6061Al composites are different. For the SiC w/p Al composite, the thermal residual stress plays more important role in strengthening than the high density dislocations in matrix; for the SiC w/6061Al composite, the dislocation strengthening and precipitation are main strengthening factors.展开更多
The structure and characteristics of dislocation networks in Ti50 Al ordered alloy deformed at room temperature were studied by means of TEM diffraction contrast analysis technique. The results show that the observed...The structure and characteristics of dislocation networks in Ti50 Al ordered alloy deformed at room temperature were studied by means of TEM diffraction contrast analysis technique. The results show that the observed dislocation networks consist of three展开更多
The aim of this essay Is to make some brief suggestions on the beginnings of a theory of agentsand agency In branching spacetlmes.foe thought Is to combine the ideas of agency as developed agalnst the relatively simpl...The aim of this essay Is to make some brief suggestions on the beginnings of a theory of agentsand agency In branching spacetlmes.foe thought Is to combine the ideas of agency as developed agalnst the relatively simple background of branching time with the richer notions of Indetermlnlsm asstructured In the theory of branching space-times.My plan Is to say a little about agency In branchingtime and a little about branchlg spacetlmes,and then ask how the two can be brought together.Atthe end there Is an ...展开更多
Differential space-time （DST） modulation has been proposed recently for multiple-antenna systems over Rayleigh fading channels, where neither the transmitter nor the receiver knows the fading coefficients. Among exi...Differential space-time （DST） modulation has been proposed recently for multiple-antenna systems over Rayleigh fading channels, where neither the transmitter nor the receiver knows the fading coefficients. Among existing schemes, differential modulation is always performed in the time domain and suffers performance degradations in frequency-selective fading channels. In order to combat the fast time and frequency-selective fading, a novel time-frequency differential space-time （TF-DST） modulation scheme, which adopts differential modulation in both time and frequency domains, is proposed for multi-antenna orthogonal frequency division multiplexing （OFDM） system. A corresponding suboptimal yet low-complexity non-coherent detection approach is also proposed. Simulation results demonstrate that the proposed system is robust for time and frequency-selective Rayleigh fading channels.展开更多
Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit...Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit element increases.A subarray-based space-time coding(sub-STC)radar is explored to alleviate the range resolution reduction.For the proposed radar configuration,an identical waveform is transmitted and it introduces a small time offset in different subarrays.The multidimensional ambiguity function of sub-STC radar is defined by considering resolutions in multiple domains including the range,Doppler,angle and probing direction.Analyses on properties of the multi-dimensional ambiguity function of the sub-STC radar with regard to the spatial coverage,resolution performance and low sidelobes are also given.Results reveal that the range resolution and low sidelobes performance are improved with the proposed approach.展开更多
The simplified joint channel estimation and symbol detection based on the EM (expectation-maximization) algorithm for space-time block code (STBC) are proposed. By assuming channel to be invariant within only one STBC...The simplified joint channel estimation and symbol detection based on the EM (expectation-maximization) algorithm for space-time block code (STBC) are proposed. By assuming channel to be invariant within only one STBC word and utilizing the orthogonal structure of STBC, the computational complexity and cost of this algorithm are both very low, so it is very suitable to implementation in real systems.展开更多
基金Supported by National Key Research and Development Program of China(2021YFB3601403)National Natural Science Foundation of China(62105181)Taishan Scholar of Shandong Province(tsqn202306014)。
文摘Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.
基金Project(2023YFB3710503) supported by the National Key R&D Program of ChinaProject(52305439) supported by the National Natural Science Foundation of China。
文摘The orientation effect of θʹ precipitates in stress-aged Al-Cu alloys has ambiguous interpretations. One view is that θʹ precipitates prefer to grow on the habit planes perpendicular to the applied compressive stress, while the other view suggests growth on habit planes parallel to the applied stress. In this study, stress-aged Al-4 wt.%Cu single crystal was sampled from three different <100>Al zone axes to observe the distribution of θʹ precipitates. A hybrid Monte-Carlo/ molecular dynamics simulations were used to investigate the orientation effect of θʹ precipitates. The simulation results are consistent with experimental observations and indicate that θʹ precipitates prefer to grow on the habit planes that are parallel to the direction of the applied compressive stress, not along the planes perpendicular to it. It is also found that 1/2<110> perfect dislocations are generated as θʹ precipitates plates grow thicker, and the reaction of 1/2<110> perfect dislocations decomposing into 1/6<112> Shockley dislocations lead to an increase in the length of θʹ precipitates. The former does not enhance the orientation effect, whereas the latter leads to a more significant orientation effect. Additionally, the degree of the orientation effect of θʹ precipitates is determined by the reduction of 1/2<110> dislocations with a positive correlation between them.
基金Projects(52274404,52305441,U22A20190)supported by the National Natural Science Foundation of ChinaProjects(2022JJ20065,2023JJ40739)supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2022RC1001)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2023ZZTS0972)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2021YFB3400903)supported by the National Key R&D Program of China。
文摘The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formability of Al-Cu-Li alloy is vital.A thorough comparison of the effects of cryo-deformation and ambient temperature large pre-deformation(LPD)on the creep ageing response in the 2195 alloy sheet at 160℃with different stresses has been made.The evolution of dislocations and precipitates during creep ageing of LPD alloys are revealed by X-ray diffraction and transmission electron microscopy.High-quality 2195 alloy sheet largely pre-deformed by 80%without edge-cracking is obtained by cryo-rolling at liquid nitrogen temperature,while severe edge-cracking occurs during room temperature rolling.The creep formability and strength of the 2195 alloy are both enhanced by introducing pre-existing dislocations with a density over 1.4×10^(15)m^(−2).At 160℃and 150 MPa,creep strain and creep-aged strength generally increases by 4−6 times and 30−50 MPa in the LPD sample,respectively,compared to conventional T3 alloy counterpart.The elongation of creep-aged LPD sample is low but remains relevant for application.The high-density dislocations,though existing in the form of dislocation tangles,promote the formation of refined T1 precipitates with a uniform dispersion.
基金Project(10472030) supported by the National Natural Science Foundation of China
文摘A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.
基金Project(51675465)supported by the National Natural Science Foundation of ChinaProject(E2019203075)supported by the Natural Science Foundation of Hebei Province,China+1 种基金Project(BJ2019001)supported by the Top Young Talents Project of the Education Department of Hebei Province,ChinaProject(Kfkt2017-07)supported by the State Key Laboratory Program of High Performance Complex Manufacturing,China。
文摘The microstructure evolution of 7A85 aluminum alloy at the conditions of strain rate(0.001−1 s^(−1))and deformation temperature(250−450°C)was studied by optical microscopy(OM)and electron back scattering diffraction(EBSD).Based on the K-M dislocation density model,a two-stage K-M dislocation density model of 7A85 aluminum alloy was established.The results reveal that dynamic recovery(DRV)and dynamic recrystallization(DRX)are the main mechanisms of microstructure evolution during thermal deformation of 7A85 aluminum alloy.350−400°C is the transformation zone from dynamic recovery to dynamic recrystallization.At low temperature(≤350°C),DRV is the main mechanism,while DRX mostly occurs at high temperature(≥400°C).At this point,the sensitivity of microstructure evolution to temperature is relatively high.As the temperature increased,the average misorientation angle(θˉ_(c))increased significantly,ranging from 0.93°to 7.13°.Meanwhile,the f_(LAGBs) decreased with the highest decrease of 24%.
文摘Based on the Biot＇s theory about two-phase saturated medium, according to the character of δ function, the Green function on two-phase saturated medium by the point source under concentrated force can be derived. By the Betti＇s theorem for the two-phase saturated medium field, the source vector and static displacement field by elastic dislocation on the two-phase saturated medium were comprehensively discussed.
基金Projects(50801025, 50634060 ) supported by the National Natural Science Foundation of China
文摘The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT and NABARRO's model. The influence of interface stresses on the critical shear stress was examined. The result indicates that, if the volume fraction of the core-shell nanowires keeps a constant, an optimal critical shear stress may be obtained when the radius of the nanowire with interface stresses reaches a critical value, which differs from the classical solution without considering the interface stresses under the same external conditions. In addition, the material may be strengthened by the soft nanowires when the interface stresses are considered. There also exist critical values of the elastic modulus and the thickness of surface coating to alter the strengthening effect produced by it.
基金supported by the National Natural Science Foundation of China(60901056)
文摘This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter model,STAP performance is then analyzed from the perspective of covariance matrix tapering（CMT）.For STAP performance degradation due to array rotation,a determinate compensation method is proposed based on the CMT method.Numerical examples are provided to verify the analysis and the proposed compensation method.
文摘In non-homogeneous environment, traditional space-time adaptive processing doesn＇t effectively suppress interference and detect target, because the secondary data don＇ t exactly reflect the statistical characteristic of the range cell under test. A ravel methodology utilizing the direct data domain approach to space-time adaptive processing （ STAP ） in airbome radar non-homogeneous environments is presented. The deterministic least squares adaptive signal processing technique operates on a ＂snapshot-by-snapshot＂ basis to dethrone the adaptive adaptive weights for nulling interferences and estimating signal of interest （SOI）. Furthermore, this approach eliminates the requirement for estimating the covariance through the data of neighboring range cell, which eliminates calculating the inverse of covariance, and can be implemented to operate in real-time. Simulation results illustrate the efficiency of interference suppression in non-homogeneous environment.
基金Project(17D02)supported by the Open Fund of State Laboratory of Information Engineering in Surveying,Mapping and Remote Sensing,Wuhan University,ChinaProject supported by the State Key Laboratory of Satellite Navigation System and Equipment Technology,China
文摘In various environmental studies, geoscience variables not only have the characteristics of time and space, but also are influenced by other variables. Multivariate spatiotemporal variables can improve the accuracy of spatiotemporal estimation. Taking the monthly mean ground observation data of the period 1960–2013 precipitation in the Xinjiang Uygur Autonomous Region, China, the spatiotemporal distribution from January to December in 2013 was respectively estimated by space-time Kriging and space-time CoKriging. Modeling spatiotemporal direct variograms and a cross variogram was a key step in space-time CoKriging. Taking the monthly mean air relative humidity of the same site at the same time as the covariates, the spatiotemporal direct variograms and the spatiotemporal cross variogram of the monthly mean precipitation for the period 1960–2013 were modeled. The experimental results show that the space-time CoKriging reduces the mean square error by 31.46% compared with the space-time ordinary Kriging. The correlation coefficient between the estimated values and the observed values of the space-time CoKriging is 5.07% higher than the one of the space-time ordinary Kriging. Therefore, a space-time CoKriging interpolation with air humidity as a covariate improves the interpolation accuracy.
基金the National Natural Science Foundation of China (60372022).
文摘Under dense urban fading environment, performance of joint multi-path parameter estimation method based on traditional point signal model degrades seriously. In this paper, a new space and time signal model based on multipath distribution function is given after new space and time manifold is reconstructed. Then joint spacetime signal subspace is obtained by converting acquired channel from time domain to frequency domain .Then space and time spectrum is formulated by the space sub-matrix and time sub-matrix taken out of joint space-time signal subspace, and parameters are estimated by searching the minimum eigenvalues of the space matrix and the time matrix. Lastly, A space and time parameters matching process is performed by using the orthogonal property between joint noise subspace and the space-time manifold. In contrast with tradition MUSIC, the algorithm we present here only need two 1- dimension searching and was not sensitive to different distribution function.
文摘A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dislocation and randomly distributed spherical dispersoids(Y2O3) in bcc iron was performed for measuring the influence of the dispersoid distribution on the critical resolved shear stress(CRSS). The dispersoid distribution was made using a method mimicking the Ostwald growth mechanism. Then, an edge dislocation was introduced, and was moved under a constant shear stress condition. The CRSS was extracted from the result of dislocation velocity under constant shear stress using the mobility(linear) relationship between the shear stress and the dislocation velocity. The results suggest that the dispersoid distribution gives a significant influence to the CRSS, and the influence of dislocation dipole, which forms just before finishing up the Orowan looping mechanism, is substantial in determining the CRSS, especially for the interaction with small dispersoids. Therefore, the well-known Orowan equation for determining the CRSS cannot give an accurate estimation, because the influence of the dislocation dipole in the process of the Orowan looping mechanism is not accounted for in the equation.
文摘Using embedded atom method and molecular static relaxation method, the core structure of <100>, <110> edge dislocations, <100> screw dislocation, the interaction between point defects and <100> edge dislocation in NiAl intermetallics were investigated. The results show that <100>edge dislocation expands along and orientation on the (001) slip plane. The core structure of <100> edge dislocation on (001) plane is like a 'butterfly', while it is very compact when it lies on {110} slip plane. So NiAl will have a <100>{110} slip system in stead of <100>{100} slip system, as experiments showed. <110> edge dislocation has a more expanded core structure and the atoms of dislocation core distort more heavily. None dislocation dissociation was found in the studied dislocations. The outlines of dislocation core structures change very little after a row of point defects are introduced in them, which can be explained by point defects' little effects on the stress field around dislocation core. The results also show that it is hard to change dislocation core structure by decreasing alloy order using the method of introducing limited point defects into the alloy.
文摘By means of XRD, Instron electronic tensile machine and TEM, the dislocation states and strengthening mechanisms of SiC whisker reinforced pure aluminum matrix composites were studied with different annealing treatment processes and matrixes. The results showed that the strengthening mechanisms of SiC w/p Al composite and SiC w/6061Al composites are different. For the SiC w/p Al composite, the thermal residual stress plays more important role in strengthening than the high density dislocations in matrix; for the SiC w/6061Al composite, the dislocation strengthening and precipitation are main strengthening factors.
文摘The structure and characteristics of dislocation networks in Ti50 Al ordered alloy deformed at room temperature were studied by means of TEM diffraction contrast analysis technique. The results show that the observed dislocation networks consist of three
文摘The aim of this essay Is to make some brief suggestions on the beginnings of a theory of agentsand agency In branching spacetlmes.foe thought Is to combine the ideas of agency as developed agalnst the relatively simple background of branching time with the richer notions of Indetermlnlsm asstructured In the theory of branching space-times.My plan Is to say a little about agency In branchingtime and a little about branchlg spacetlmes,and then ask how the two can be brought together.Atthe end there Is an ...
文摘Differential space-time （DST） modulation has been proposed recently for multiple-antenna systems over Rayleigh fading channels, where neither the transmitter nor the receiver knows the fading coefficients. Among existing schemes, differential modulation is always performed in the time domain and suffers performance degradations in frequency-selective fading channels. In order to combat the fast time and frequency-selective fading, a novel time-frequency differential space-time （TF-DST） modulation scheme, which adopts differential modulation in both time and frequency domains, is proposed for multi-antenna orthogonal frequency division multiplexing （OFDM） system. A corresponding suboptimal yet low-complexity non-coherent detection approach is also proposed. Simulation results demonstrate that the proposed system is robust for time and frequency-selective Rayleigh fading channels.
基金supported by the National Key Research and Development Program of China(2016YFE0200400)the Key R&D Program of Shaanxi Province(2017KW-ZD-12)+1 种基金the Postdoctoral Science Foundation of Shaanxi Provincethe Nature Science Foundation of Shaanxi Province
文摘Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit element increases.A subarray-based space-time coding(sub-STC)radar is explored to alleviate the range resolution reduction.For the proposed radar configuration,an identical waveform is transmitted and it introduces a small time offset in different subarrays.The multidimensional ambiguity function of sub-STC radar is defined by considering resolutions in multiple domains including the range,Doppler,angle and probing direction.Analyses on properties of the multi-dimensional ambiguity function of the sub-STC radar with regard to the spatial coverage,resolution performance and low sidelobes are also given.Results reveal that the range resolution and low sidelobes performance are improved with the proposed approach.
基金This project was supported by the National Natural Science Foundation of China (60272079).
文摘The simplified joint channel estimation and symbol detection based on the EM (expectation-maximization) algorithm for space-time block code (STBC) are proposed. By assuming channel to be invariant within only one STBC word and utilizing the orthogonal structure of STBC, the computational complexity and cost of this algorithm are both very low, so it is very suitable to implementation in real systems.
