随着先进工艺和技术的不断进步,要想保证数据在高速传输中的正确性,均衡器需要有更高的补偿和更低的功耗,才能实现高效通信。基于12 nm互补金属氧化物半导体工艺,设计了一种高增益、低功耗的自适应连续时间线性均衡器(continuous time l...随着先进工艺和技术的不断进步,要想保证数据在高速传输中的正确性,均衡器需要有更高的补偿和更低的功耗,才能实现高效通信。基于12 nm互补金属氧化物半导体工艺,设计了一种高增益、低功耗的自适应连续时间线性均衡器(continuous time linear equalizer,CTLE),该均衡器采用2级级联结构来补偿信道衰减,并提高接收信号的质量。此外,自适应模块通过采用符号-符号最小均方误差(sign-sign least mean square,SS-LMS)算法,使抽头系数加快了收敛速度。仿真结果表明,当传输速率为16 Gbit/s时,均衡器可以补偿-15.53 dB的半波特率通道衰减,均衡器系数在16×10^(4)个单元间隔数据内收敛,并且收敛之后接收误码率低于10^(-12)。展开更多
Rotary friction welding is a highly effective solid-state technique for joining dissimilar materials,which offers the potential for significant weight reduction without compromising strength.Traditionally,during rotar...Rotary friction welding is a highly effective solid-state technique for joining dissimilar materials,which offers the potential for significant weight reduction without compromising strength.Traditionally,during rotary friction welding,the severely deformed material,or flash,is expelled from the interface and machined away to achieve the desired joint geometry.However,this work introduces a novel approach:trapping the flash within the joint to improve joint properties.The study investigates two different interface geometry combinationsdflat-flat and flat-taper interfaces.Previous research shows that Ni interlayer between steel and titanium can enhance the joint strength.This study builds on the existing knowledge(effect of Ni interlayer)by examining the influence of interface geometry to further improve the dissimilar joint performance.The experimental results,including tensile testing and microstructural characterization,highlight the superior performance of the flat-taper interface.The modified geometry minimizes flash loss,providing a cavity that retains both the flash and the Ni interlayer within the joint.This retention promotes dynamic recrystallization,resulting in refined grain structures near the interface.Moreover,the trapped Ni interlayer effectively prevents the formation of brittle Fe-Ti intermetallic compounds at the dissimilar material interface.The findings reveal that the flat-taper interface improved joint strength by an impressive 105%compared to the flat-flat interface.This innovative geometry modification demonstrates the potential to enhance mechanical properties of dissimilar joints through better flash and interlayer management.展开更多
This study presents the ballistic limit velocity of small caliber projectiles against SS400 steel plate derived from live-fire ballistic experiments. Four different small caliber projectiles were tested against SS400 ...This study presents the ballistic limit velocity of small caliber projectiles against SS400 steel plate derived from live-fire ballistic experiments. Four different small caliber projectiles were tested against SS400 steel plates of 9 mm, 10 mm, and 12 mm thicknesses. The ballistic limit velocity was calculated using two standard methods, MIL-STD-662F and NIJ-STD-0101.06, and additionally using a support vector machine algorithm. The results show a linear relationship between the plate thickness and ballistic limit velocity. Further, the relative penetration performance among five different small caliber projectiles was analyzed using the Penetration Performance Ratio(PPR) introduced in this study, which suggests the potential of PPR to predict the ballistic limit velocity of other untested materials and/or different projectiles.展开更多
文摘随着先进工艺和技术的不断进步,要想保证数据在高速传输中的正确性,均衡器需要有更高的补偿和更低的功耗,才能实现高效通信。基于12 nm互补金属氧化物半导体工艺,设计了一种高增益、低功耗的自适应连续时间线性均衡器(continuous time linear equalizer,CTLE),该均衡器采用2级级联结构来补偿信道衰减,并提高接收信号的质量。此外,自适应模块通过采用符号-符号最小均方误差(sign-sign least mean square,SS-LMS)算法,使抽头系数加快了收敛速度。仿真结果表明,当传输速率为16 Gbit/s时,均衡器可以补偿-15.53 dB的半波特率通道衰减,均衡器系数在16×10^(4)个单元间隔数据内收敛,并且收敛之后接收误码率低于10^(-12)。
文摘Rotary friction welding is a highly effective solid-state technique for joining dissimilar materials,which offers the potential for significant weight reduction without compromising strength.Traditionally,during rotary friction welding,the severely deformed material,or flash,is expelled from the interface and machined away to achieve the desired joint geometry.However,this work introduces a novel approach:trapping the flash within the joint to improve joint properties.The study investigates two different interface geometry combinationsdflat-flat and flat-taper interfaces.Previous research shows that Ni interlayer between steel and titanium can enhance the joint strength.This study builds on the existing knowledge(effect of Ni interlayer)by examining the influence of interface geometry to further improve the dissimilar joint performance.The experimental results,including tensile testing and microstructural characterization,highlight the superior performance of the flat-taper interface.The modified geometry minimizes flash loss,providing a cavity that retains both the flash and the Ni interlayer within the joint.This retention promotes dynamic recrystallization,resulting in refined grain structures near the interface.Moreover,the trapped Ni interlayer effectively prevents the formation of brittle Fe-Ti intermetallic compounds at the dissimilar material interface.The findings reveal that the flat-taper interface improved joint strength by an impressive 105%compared to the flat-flat interface.This innovative geometry modification demonstrates the potential to enhance mechanical properties of dissimilar joints through better flash and interlayer management.
文摘This study presents the ballistic limit velocity of small caliber projectiles against SS400 steel plate derived from live-fire ballistic experiments. Four different small caliber projectiles were tested against SS400 steel plates of 9 mm, 10 mm, and 12 mm thicknesses. The ballistic limit velocity was calculated using two standard methods, MIL-STD-662F and NIJ-STD-0101.06, and additionally using a support vector machine algorithm. The results show a linear relationship between the plate thickness and ballistic limit velocity. Further, the relative penetration performance among five different small caliber projectiles was analyzed using the Penetration Performance Ratio(PPR) introduced in this study, which suggests the potential of PPR to predict the ballistic limit velocity of other untested materials and/or different projectiles.
