As the“throat”of the drilling well control system,ram blowout preventers(BOPs)can effectively prevent blowout accidents.However,the ram shear mechanism under complex working conditions is unclear,and it is difficult...As the“throat”of the drilling well control system,ram blowout preventers(BOPs)can effectively prevent blowout accidents.However,the ram shear mechanism under complex working conditions is unclear,and it is difficult to evaluate the ram BOP shear force,leading to frequent shear failure accidents in oilfields.Aiming at the above problems,this paper takes the double-V ram BOP as the research object,and integrates the methods of theoretical analysis,simulation modeling,and test verification to analyze the shear force in the pipe shear process under both static and moving conditions.A ram BOP shear force evaluation method is proposed based on equivalent stress.Finally,by comparing with calculation data and experimental data,the error between them is less than 5%,demonstrating the applicability and effectiveness of the proposed method.The research results can provide a theoretical basis for oilfield operations of ram BOPs.展开更多
The nanoparticles suspended in a shear flow are subjected to a shear lift force,which is of great importance for the nanoparticle transport.In previous theoretical analysis on the shear lift,it is usually assumed that...The nanoparticles suspended in a shear flow are subjected to a shear lift force,which is of great importance for the nanoparticle transport.In previous theoretical analysis on the shear lift,it is usually assumed that the particle temperature is equal to the temperature of the surrounding gas media.However,in some particular applications,the particle temperature can significantly differ from the gas temperature.In the present study,the effect of particle temperature on the shear lift of nanoparticles is investigated and the corresponding formulas of shear lift force are derived based on the gas kinetic theory.For extremely small nanoparticles(with radius R<2 nm)or large nanoparticles(R>20 nm),the influence of the particle temperature can be neglected.For the intermediate particle size,the relative error induced by the equal gas–particle temperature can be significant.Our findings can bring an insight into accurate evaluation of the nanoparticle transport properties.展开更多
A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The t...A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The two- dimensional intensity distribution and the time evolution of speckles in different probe locations are obtained. The fluctuation of speckle intensity tracks the acoustic-radiation-force shear wave propagation, and especially the reduction of speckle intensity implies attenuation of shear wave. Then, the shear wave velocity is estimated quantitatively on the basis of the time-to-peak algorithm and linear regression processing. The results reveal that a smaller sampling interval yields higher estimation precision and the shear wave velocity is estimated more efficiently by using speckle intensity difference than by using speckle contrast difference according to the estimation error. Hence, the shear wave velocity is estimated to be 2.25 m/s with relatively high accuracy for the estimation error reaches the minimum （0.071）.展开更多
Nanowires and nanotubes of diverse material compositions,properties and/or functions have been produced or fabricated through various bottom-up or top-down approaches.These nanowires or nanotubes have also been utiliz...Nanowires and nanotubes of diverse material compositions,properties and/or functions have been produced or fabricated through various bottom-up or top-down approaches.These nanowires or nanotubes have also been utilized as potential building blocks for functional nanodevices.The key for the integration of those nanowire or nanotube based devices is to assemble these one dimensional nanomaterials to specific locations using techniques that are highly controllable and scalable.Ideally such techniques should enable assembly of highly uniform nanowire/nanotube arrays with precise control of density,location,dimension or even material types of nanowires/nanotubes.Numerous assembly techniques are being developed that can quickly align and assemble large quantities of one type or multiple types of nanowires through parallel processes,including flow-assisted alignment,Langmuir-Blodgett assembly,bubble-blown technique,electric/magnetic-field directed assembly,contact/roll printing,knocking-down,etc..With these assembling techniques,applications of nanowire/nanotube based devices such as flexible electronics and sensors have been demonstrated.This paper delivers an overall review of directed nanowire/nanotube assembling approaches and analyzes advantages and limitations of each method.The future research directions have also been discussed.展开更多
Based on the Particle Flow Code(PFC^(2D)) program,we set up gangue backfill models with different gangue contents and bond strength,and studied the stress-strain behaviours,the pattern of shear band and force chains,m...Based on the Particle Flow Code(PFC^(2D)) program,we set up gangue backfill models with different gangue contents and bond strength,and studied the stress-strain behaviours,the pattern of shear band and force chains,motion and fragmentation of particles under biaxial compression.The results show that when the bond strength or contents of gangue are high,the peak strength is high and the phenomena of post-peak softening and fluctuation are obvious.When gangue contents are low,the shape of the shear band is symmetrical and most strong force chains transfer in soil particles.With an increase in gangue content,the shape of the shear band becomes irregular and the majority of strong force chains turn to transfer in gangue particles gradually,most of which distribute along the axial direction.When the gangue content is higher than 50%,the interconnectivity of strong force chains decreases gradually:at the same time,the strong force chains become tilted and the stability of the system tends to decrease.With an increase in external loading,the coordination numbers of the system increase at first and then decrease and the main pattern of force chains changes into columnar from annular.However,after the forming of the advantageous shear band,the force chains external to the shear band maintain their columnar shape while the inner ones bend obviously.As a result,annular force chains form.展开更多
基金This research acknowledges the financial support provided by the Key Program of National Natural Science Foundation of China(52234007).
文摘As the“throat”of the drilling well control system,ram blowout preventers(BOPs)can effectively prevent blowout accidents.However,the ram shear mechanism under complex working conditions is unclear,and it is difficult to evaluate the ram BOP shear force,leading to frequent shear failure accidents in oilfields.Aiming at the above problems,this paper takes the double-V ram BOP as the research object,and integrates the methods of theoretical analysis,simulation modeling,and test verification to analyze the shear force in the pipe shear process under both static and moving conditions.A ram BOP shear force evaluation method is proposed based on equivalent stress.Finally,by comparing with calculation data and experimental data,the error between them is less than 5%,demonstrating the applicability and effectiveness of the proposed method.The research results can provide a theoretical basis for oilfield operations of ram BOPs.
基金the National Natural Science Foundation of China(Grant No.51776007)Beijing Nova Program of Science and Technology(Grant No.Z191100001119033)the Youth Talent Support Program of Beijing Municipal Education Committee(Grant No.CIT&TCD201904015)。
文摘The nanoparticles suspended in a shear flow are subjected to a shear lift force,which is of great importance for the nanoparticle transport.In previous theoretical analysis on the shear lift,it is usually assumed that the particle temperature is equal to the temperature of the surrounding gas media.However,in some particular applications,the particle temperature can significantly differ from the gas temperature.In the present study,the effect of particle temperature on the shear lift of nanoparticles is investigated and the corresponding formulas of shear lift force are derived based on the gas kinetic theory.For extremely small nanoparticles(with radius R<2 nm)or large nanoparticles(R>20 nm),the influence of the particle temperature can be neglected.For the intermediate particle size,the relative error induced by the equal gas–particle temperature can be significant.Our findings can bring an insight into accurate evaluation of the nanoparticle transport properties.
基金Supported by the National Key Scientific Instrument and Equipment Development Projects of China under Grant No 81127901the National Natural Science Foundation of China under Grant Nos 61372017 and 30970828
文摘A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The two- dimensional intensity distribution and the time evolution of speckles in different probe locations are obtained. The fluctuation of speckle intensity tracks the acoustic-radiation-force shear wave propagation, and especially the reduction of speckle intensity implies attenuation of shear wave. Then, the shear wave velocity is estimated quantitatively on the basis of the time-to-peak algorithm and linear regression processing. The results reveal that a smaller sampling interval yields higher estimation precision and the shear wave velocity is estimated more efficiently by using speckle intensity difference than by using speckle contrast difference according to the estimation error. Hence, the shear wave velocity is estimated to be 2.25 m/s with relatively high accuracy for the estimation error reaches the minimum （0.071）.
基金the financial support from Natural Science and Engineering Research Council of Canada (NSERC)funding from Science and Technology Commission of Shanghai Municipality (No.11PJ1403500)+1 种基金the Open Project Program of State Key Laboratory of Industrial Control Technology (No.ICT1113)Innovation Program of Shanghai Municipal Education Commission (No.12YZ022)
文摘Nanowires and nanotubes of diverse material compositions,properties and/or functions have been produced or fabricated through various bottom-up or top-down approaches.These nanowires or nanotubes have also been utilized as potential building blocks for functional nanodevices.The key for the integration of those nanowire or nanotube based devices is to assemble these one dimensional nanomaterials to specific locations using techniques that are highly controllable and scalable.Ideally such techniques should enable assembly of highly uniform nanowire/nanotube arrays with precise control of density,location,dimension or even material types of nanowires/nanotubes.Numerous assembly techniques are being developed that can quickly align and assemble large quantities of one type or multiple types of nanowires through parallel processes,including flow-assisted alignment,Langmuir-Blodgett assembly,bubble-blown technique,electric/magnetic-field directed assembly,contact/roll printing,knocking-down,etc..With these assembling techniques,applications of nanowire/nanotube based devices such as flexible electronics and sensors have been demonstrated.This paper delivers an overall review of directed nanowire/nanotube assembling approaches and analyzes advantages and limitations of each method.The future research directions have also been discussed.
基金supported by the Fundamental Research Funds for the Central Universities(Nos.2010QNB25 and 2012LWB66)the National Natural Science Foundation of China(Nos.51323004,51074163 and 50834005)+1 种基金the Trans-Century Training Programme Foundation for the Talents by the State Education Commission(No.NCET-08-0837)the"Six Major Talent"Plan of Jiangsu Province and the Graduate Innovation Fund Project of Jiangsu Province(No.CXZZ13_0924)
文摘Based on the Particle Flow Code(PFC^(2D)) program,we set up gangue backfill models with different gangue contents and bond strength,and studied the stress-strain behaviours,the pattern of shear band and force chains,motion and fragmentation of particles under biaxial compression.The results show that when the bond strength or contents of gangue are high,the peak strength is high and the phenomena of post-peak softening and fluctuation are obvious.When gangue contents are low,the shape of the shear band is symmetrical and most strong force chains transfer in soil particles.With an increase in gangue content,the shape of the shear band becomes irregular and the majority of strong force chains turn to transfer in gangue particles gradually,most of which distribute along the axial direction.When the gangue content is higher than 50%,the interconnectivity of strong force chains decreases gradually:at the same time,the strong force chains become tilted and the stability of the system tends to decrease.With an increase in external loading,the coordination numbers of the system increase at first and then decrease and the main pattern of force chains changes into columnar from annular.However,after the forming of the advantageous shear band,the force chains external to the shear band maintain their columnar shape while the inner ones bend obviously.As a result,annular force chains form.
