Based on the force-heat equivalence energy density principle,a theoretical model for magnetic metallic materials is developed,which characterizes the temperature-dependent magnetic anisotropy energy by considering the...Based on the force-heat equivalence energy density principle,a theoretical model for magnetic metallic materials is developed,which characterizes the temperature-dependent magnetic anisotropy energy by considering the equivalent relationship between magnetic anisotropy energy and heat energy;then the relationship between the magnetic anisotropy constant and saturation magnetization is considered.Finally,we formulate a temperature-dependent model for saturation magnetization,revealing the inherent relationship between temperature and saturation magnetization.Our model predicts the saturation magnetization for nine different magnetic metallic materials at different temperatures,exhibiting satisfactory agreement with experimental data.Additionally,the experimental data used as reference points are at or near room temperature.Compared to other phenomenological theoretical models,this model is considerably more accessible than the data required at 0 K.The index included in our model is set to a constant value,which is equal to 10/3 for materials other than Fe,Co,and Ni.For transition metals(Fe,Co,and Ni in this paper),the index is 6 in the range of 0 K to 0.65T_(cr)(T_(cr) is the critical temperature),and 3 in the range of 0.65T_(cr) to T_(cr),unlike other models where the adjustable parameters vary according to each material.In addition,our model provides a new way to design and evaluate magnetic metallic materials with superior magnetic properties over a wide range of temperatures.展开更多
The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact, relatively low-cost and easy-to-handle characteris...The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact, relatively low-cost and easy-to-handle characteristics. The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design, because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation. This work proposes analytical formulas of the criterion of magnetic saturation for the cores when the transformer drives practical loads. Furthermore, an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores. The numerical simulation with the model is used to evaluate the validity of the criterion. Both the criterion and the model are found to be in agreement with the experimental data.展开更多
Nanostructured BN and BN-Co films with Cu,Co,Au as the top electrodes,and Pt as the bottom electrodes were grown by magnetron sputtering.Both BN samples and BN-Co ones show bipolar resistive switching behaviors.For th...Nanostructured BN and BN-Co films with Cu,Co,Au as the top electrodes,and Pt as the bottom electrodes were grown by magnetron sputtering.Both BN samples and BN-Co ones show bipolar resistive switching behaviors.For the sample with active Cu as the top electrode,the formation and rupture of metallic Cu conductive filaments can explain the resistive switching behavior;for the other samples,the generation and annihilation of nitrogen vacancies under the electric stimuli may contribute to the occurrence of resistive switching.Taking advantage of the formed and broken Co-N bonds during resistive switching,the saturation magnetization of the BN-Co films can be modulated.Thus,it investigated the resistive switching behavior of BN and BN-Co materials in this work.Similar to that of oxide materials,the resistive switching behaviors of the nitrides may be attributed to the movement of cations or anions within the dielectric or electrodes during the application of voltage.Additionally,ion migration may lead to the formation or breaking of Co-N bonds,which can effectively regulate the magnetism of BN-Co materials.This study extends resistive switching materials to nitrides,enabling the regulation of magnetism along with resistance changes,thus providing insights for the design of novel voltage-controlled magnetic devices and achieving multi-functionality.展开更多
A series of Ni_（0.6-x/2）Zn_（0.4-x/2）Sn_xFe_2O_4（x = 0.0, 0.05, 0.1, 0.15, 0.2, and 0.3）（NZSFO） ferrite composities have been synthesized from nano powders using a standard solid state reaction technique. The s...A series of Ni_（0.6-x/2）Zn_（0.4-x/2）Sn_xFe_2O_4（x = 0.0, 0.05, 0.1, 0.15, 0.2, and 0.3）（NZSFO） ferrite composities have been synthesized from nano powders using a standard solid state reaction technique. The spinel cubic structure of the investigated samples has been confirmed by x-ray diffraction（XRD）. The magnetic properties such as saturation magnetization（M_s）,remanent magnetization（M_r）, coercive field（H_c）, and Bohr magneton（μ） are calculated from the hysteresis loops. The value of M_s is found to decrease with increasing Sn content in the samples. This change is successfully explained by the variation of A-B interaction strength due to Sn substitution in different sites. The compositional stability and quality of the prepared ferrite composites have also been endorsed by the fairly constant initial permeability（μ＇） over a wide range of frequency. The decreasing trend of μ＇ with increasing Sn content has been observed. Curie temperature TChas been found to increase with the increase in Sn content. A wide spread frequency utility zone indicates that the NZSFO can be considered as a good candidate for use in broadband pulse transformers and wide band read-write heads for video recording. The composition of x = 0.05 shows unusual results and the possible reason is also mentioned with the established formalism.展开更多
This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic fe...This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.展开更多
The dependences of soft magnetic properties and microstructures of the sputtered FeCo （=Fe65Co35） films on Co underlayer thickness tCo, FeCo thickness tFeCo, substrate temperature Ts and taxget-substrate spacing dT-...The dependences of soft magnetic properties and microstructures of the sputtered FeCo （=Fe65Co35） films on Co underlayer thickness tCo, FeCo thickness tFeCo, substrate temperature Ts and taxget-substrate spacing dT-s are studied. FeCo single layer generally shows a high coercivity with no obvious magnetic anisotropy. Excellent soft magnetic properties with saturation magnetization μ0Ms of 2.35 T and hard axis coercivity Hch of 0.25 kA/m in FeCo films can be achieved by introducing a Co underlayer. It is shown that sandwiching a Co underlayer causes a change in orientation and reduction in grain size from 70 nm to about 10 nm in the FeCo layer. The magnetic softness can be explained by the Hoffmann＇s ripple theory due to the effect of grain size. The magnetic anisotropy can be controlled by changing dT-S, and a maximum of 14.3 kA/m for anisotropic field Hk is obtained with dT-S=18.0 cm.展开更多
The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperat...The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperature, and the exchange interactions with different values of D （nm） and x. High-temperature series expansions （HTSEs） combined with the Pade approximant are used to calculate the critical temperature of （CoxFe1-x）A（Znl-xFe1＋x）BO4, and the critical exponent associated with magnetic susceptibility is obtained.展开更多
Water-based rare-earth ferrite (Re xFe 3- xO 4)magnetic fluids were prepared by chemical co-precipitation method. The result shows that saturation magnetic intensity of ferrite magnetic fluids can be improved by addin...Water-based rare-earth ferrite (Re xFe 3- xO 4)magnetic fluids were prepared by chemical co-precipitation method. The result shows that saturation magnetic intensity of ferrite magnetic fluids can be improved by adding Dy 3+ and the saturation magnetic intensity will reach the highest if n(Fe)∶n(Dy 3+ )=30∶1. The modification and formation mechanism of Re xFe 3- xO 4 particles is discussed in detail. The physicochemical properties are investigated by the Gouy magnetic balance, IR, TEM, XRD, and EDX, etc.展开更多
The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are stu...The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are studied by scanning electron microscope（SEM）, XRD, and Mossbauer spectrometer. It is shown that the ratio of ferric ions on two types of sites, the octahedral and the tetrahedral, is increased with the sintering temperature. At 1300℃, the pure garnet phase has been obtained, in which the ferric ions ratio is 2：3 leading to the minimum magnetic coercivity and maximum saturation magnetization. These results provide a route to synthesize pure YIG materials as the basic materials used in various spintronics applications.展开更多
Remarkable room-temperature ferromagnetism was observed both in undoped and Cu-doped rutile TiO2 single crystals（SCs）.To tune their magnetism,Ar ion irradiation was quantitatively performed on the two crystals in wh...Remarkable room-temperature ferromagnetism was observed both in undoped and Cu-doped rutile TiO2 single crystals（SCs）.To tune their magnetism,Ar ion irradiation was quantitatively performed on the two crystals in which the saturation magnetizations for the samples were enhanced distinctively.The post-irradiation led to a spongelike layer in the near surface of the Cu-doped TiO2.Meanwhile,a new CuO-like species present in the sample was found to be dissolved after the post-irradiation.Analyzing the magnetization data unambiguously reveals that the experimentally observed ferromagnetism is related to the intrinsic defects rather than the exotic Cu ions,while these ions are directly involved in boosting the absorption in the visible region.展开更多
基金Project supported by the Natural Science Foundation of Chongqing(Grant No.CSTB2022NSCQ-MSX0391)。
文摘Based on the force-heat equivalence energy density principle,a theoretical model for magnetic metallic materials is developed,which characterizes the temperature-dependent magnetic anisotropy energy by considering the equivalent relationship between magnetic anisotropy energy and heat energy;then the relationship between the magnetic anisotropy constant and saturation magnetization is considered.Finally,we formulate a temperature-dependent model for saturation magnetization,revealing the inherent relationship between temperature and saturation magnetization.Our model predicts the saturation magnetization for nine different magnetic metallic materials at different temperatures,exhibiting satisfactory agreement with experimental data.Additionally,the experimental data used as reference points are at or near room temperature.Compared to other phenomenological theoretical models,this model is considerably more accessible than the data required at 0 K.The index included in our model is set to a constant value,which is equal to 10/3 for materials other than Fe,Co,and Ni.For transition metals(Fe,Co,and Ni in this paper),the index is 6 in the range of 0 K to 0.65T_(cr)(T_(cr) is the critical temperature),and 3 in the range of 0.65T_(cr) to T_(cr),unlike other models where the adjustable parameters vary according to each material.In addition,our model provides a new way to design and evaluate magnetic metallic materials with superior magnetic properties over a wide range of temperatures.
基金This work was supported by the National Natural Science Foundation of China,No.10035020
文摘The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact, relatively low-cost and easy-to-handle characteristics. The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design, because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation. This work proposes analytical formulas of the criterion of magnetic saturation for the cores when the transformer drives practical loads. Furthermore, an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores. The numerical simulation with the model is used to evaluate the validity of the criterion. Both the criterion and the model are found to be in agreement with the experimental data.
文摘Nanostructured BN and BN-Co films with Cu,Co,Au as the top electrodes,and Pt as the bottom electrodes were grown by magnetron sputtering.Both BN samples and BN-Co ones show bipolar resistive switching behaviors.For the sample with active Cu as the top electrode,the formation and rupture of metallic Cu conductive filaments can explain the resistive switching behavior;for the other samples,the generation and annihilation of nitrogen vacancies under the electric stimuli may contribute to the occurrence of resistive switching.Taking advantage of the formed and broken Co-N bonds during resistive switching,the saturation magnetization of the BN-Co films can be modulated.Thus,it investigated the resistive switching behavior of BN and BN-Co materials in this work.Similar to that of oxide materials,the resistive switching behaviors of the nitrides may be attributed to the movement of cations or anions within the dielectric or electrodes during the application of voltage.Additionally,ion migration may lead to the formation or breaking of Co-N bonds,which can effectively regulate the magnetism of BN-Co materials.This study extends resistive switching materials to nitrides,enabling the regulation of magnetism along with resistance changes,thus providing insights for the design of novel voltage-controlled magnetic devices and achieving multi-functionality.
基金the Directorate of Research and Extension, Chittagong University of Engineering and Technology (CUET), Chittagong-4349, Bangladesh under grant number CUET/DRE/201415/PHY/002
文摘A series of Ni_（0.6-x/2）Zn_（0.4-x/2）Sn_xFe_2O_4（x = 0.0, 0.05, 0.1, 0.15, 0.2, and 0.3）（NZSFO） ferrite composities have been synthesized from nano powders using a standard solid state reaction technique. The spinel cubic structure of the investigated samples has been confirmed by x-ray diffraction（XRD）. The magnetic properties such as saturation magnetization（M_s）,remanent magnetization（M_r）, coercive field（H_c）, and Bohr magneton（μ） are calculated from the hysteresis loops. The value of M_s is found to decrease with increasing Sn content in the samples. This change is successfully explained by the variation of A-B interaction strength due to Sn substitution in different sites. The compositional stability and quality of the prepared ferrite composites have also been endorsed by the fairly constant initial permeability（μ＇） over a wide range of frequency. The decreasing trend of μ＇ with increasing Sn content has been observed. Curie temperature TChas been found to increase with the increase in Sn content. A wide spread frequency utility zone indicates that the NZSFO can be considered as a good candidate for use in broadband pulse transformers and wide band read-write heads for video recording. The composition of x = 0.05 shows unusual results and the possible reason is also mentioned with the established formalism.
文摘This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.
文摘The dependences of soft magnetic properties and microstructures of the sputtered FeCo （=Fe65Co35） films on Co underlayer thickness tCo, FeCo thickness tFeCo, substrate temperature Ts and taxget-substrate spacing dT-s are studied. FeCo single layer generally shows a high coercivity with no obvious magnetic anisotropy. Excellent soft magnetic properties with saturation magnetization μ0Ms of 2.35 T and hard axis coercivity Hch of 0.25 kA/m in FeCo films can be achieved by introducing a Co underlayer. It is shown that sandwiching a Co underlayer causes a change in orientation and reduction in grain size from 70 nm to about 10 nm in the FeCo layer. The magnetic softness can be explained by the Hoffmann＇s ripple theory due to the effect of grain size. The magnetic anisotropy can be controlled by changing dT-S, and a maximum of 14.3 kA/m for anisotropic field Hk is obtained with dT-S=18.0 cm.
文摘The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperature, and the exchange interactions with different values of D （nm） and x. High-temperature series expansions （HTSEs） combined with the Pade approximant are used to calculate the critical temperature of （CoxFe1-x）A（Znl-xFe1＋x）BO4, and the critical exponent associated with magnetic susceptibility is obtained.
文摘Water-based rare-earth ferrite (Re xFe 3- xO 4)magnetic fluids were prepared by chemical co-precipitation method. The result shows that saturation magnetic intensity of ferrite magnetic fluids can be improved by adding Dy 3+ and the saturation magnetic intensity will reach the highest if n(Fe)∶n(Dy 3+ )=30∶1. The modification and formation mechanism of Re xFe 3- xO 4 particles is discussed in detail. The physicochemical properties are investigated by the Gouy magnetic balance, IR, TEM, XRD, and EDX, etc.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11004095,11104134,61271077,50977042,and 10904061)
文摘The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are studied by scanning electron microscope（SEM）, XRD, and Mossbauer spectrometer. It is shown that the ratio of ferric ions on two types of sites, the octahedral and the tetrahedral, is increased with the sintering temperature. At 1300℃, the pure garnet phase has been obtained, in which the ferric ions ratio is 2：3 leading to the minimum magnetic coercivity and maximum saturation magnetization. These results provide a route to synthesize pure YIG materials as the basic materials used in various spintronics applications.
基金Project supported by the National Natural Science Foundation of China(Grant No.11575074)the Open Project of State Key laboratory of Crystal Material,Shandong University,China(Grant No.KF1311)+2 种基金the Open Project of Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education,Lanzhou University,China(Grant No.LZUMMM2012003)the Open Project of Key Laboratory of Beam Technology and Material Modification of Ministry of Education,Beijing Normal University,China(Grant No.201204)the Fundamental Research Funds for the Central Universities,China(Grant No.lzujbky-2015-240)
文摘Remarkable room-temperature ferromagnetism was observed both in undoped and Cu-doped rutile TiO2 single crystals（SCs）.To tune their magnetism,Ar ion irradiation was quantitatively performed on the two crystals in which the saturation magnetizations for the samples were enhanced distinctively.The post-irradiation led to a spongelike layer in the near surface of the Cu-doped TiO2.Meanwhile,a new CuO-like species present in the sample was found to be dissolved after the post-irradiation.Analyzing the magnetization data unambiguously reveals that the experimentally observed ferromagnetism is related to the intrinsic defects rather than the exotic Cu ions,while these ions are directly involved in boosting the absorption in the visible region.
