The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analo...The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.展开更多
In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign met...In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.展开更多
Based on the abort strategy of fixed periods, a novel predictive control scheduling methodology was proposed to efficiently solve overrun problems. By applying the latest control value in the prediction sequences to t...Based on the abort strategy of fixed periods, a novel predictive control scheduling methodology was proposed to efficiently solve overrun problems. By applying the latest control value in the prediction sequences to the control objective, the new strategy was expected to optimize the control system for better performance and yet guarantee the schedulability of all tasks under overrun. The schedulability of the real-time systems with p-period overruns was analyzed, and the corresponding stability criteria was given as well. The simulation results show that the new approach can improve the performance of control system compared to that of conventional abort strategy, it can reduce the overshoot and adjust time as well as ensure the schedulability and stability.展开更多
In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can e...In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.展开更多
This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strateg...This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strategy in the model predictive control(MPC) framework. The VMS route recommendation provided by the traffic management authority is directly considered as the control variable, and the routing control model is established, in which a multi-dimensional control vector is introduced to describe the influence of route recommendations on flow distribution. In the MPC framework, a system optimum routing strategy with the constraints regarding drivers' acceptability with recommended routes is designed, which can not only meet the traffic management authority's control requirement but also improve drivers' satisfaction with the route guidance system. The simulation carried out shows that the proposed routing control can effectively mitigate traffic congestion, reduces followers' time delay, and improves drivers' satisfaction with routing control in road networks.展开更多
A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environment...A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environments. At the mobile hosts, all transactions perform local pre-validation. The local pre-validation process is carried out against the committed transactions at the server in the last broadcast cycle. Transactions that survive in local pre-validation must be submitted to the server for local final validation. The new protocol eliminates conflicts between mobile read-only and mobile update transactions, and resolves data conflicts flexibly by using multiversion dynamic adjustment of serialization order to avoid unnecessary restarts of transactions. Mobile read-only transactions can be committed with no-blocking, and respond time of mobile read-only transactions is greatly shortened. The tolerance of mobile transactions of disconnections from the broadcast channel is increased. In global validation mobile distributed transactions have to do check to ensure distributed serializability in all participants. The simulation results show that the new concurrency control protocol proposed offers better performance than other protocols in terms of miss rate, restart rate, commit rate. Under high work load （think time is ls） the miss rate of DMVOCC-MVDA is only 14.6%, is significantly lower than that of other protocols. The restart rate of DMVOCC-MVDA is only 32.3%, showing that DMVOCC-MVDA can effectively reduce the restart rate of mobile transactions. And the commit rate of DMVOCC-MVDA is up to 61.2%, which is obviously higher than that of other protocols.展开更多
背景急性缺血性卒中(AIS)高发,及时恢复脑血流是治疗的关键,超时间窗就诊患者无更多促进脑血流恢复的治疗手段。研究远隔缺血后适应(RIPostC)治疗对AIS超时间窗就诊患者的临床疗效、并发症和预后,具有重要的临床意义。目的探究RIPostC...背景急性缺血性卒中(AIS)高发,及时恢复脑血流是治疗的关键,超时间窗就诊患者无更多促进脑血流恢复的治疗手段。研究远隔缺血后适应(RIPostC)治疗对AIS超时间窗就诊患者的临床疗效、并发症和预后,具有重要的临床意义。目的探究RIPostC治疗对AIS超时间窗患者干预的影响,为超时间窗就诊的AIS患者寻求安全、有效的脑血流恢复治疗方式。方法本研究采用随机、分组、安慰剂对照法进行试验。选取2021-09-02—2022-08-31于北京航天总医院神经内科病房住院治疗的超溶栓时间窗(发病时间>6 h)的AIS患者为研究对象。依据随机数字表法将患者分为对照组和试验组。试验期+随访期共90 d,均使用同等的一般治疗、脑血管病常规治疗,试验组在此基础上给予RIPostC治疗14 d(28次),对照组给予模拟的RIPostC治疗14 d(28次)。在干预前和干预后30 d、干预后90 d,采用改良Rankin量表(mRS)、美国国立卫生研究院卒中量表(NIHSS)评估两组患者神经功能,简易精神状态检查量表(MMSE)、蒙特利尔认知评估量表(MoCA)评估患者认知功能,工具性日常生活能力量表(IADL)评估日常生活能力,焦虑自评量表(SAS)、抑郁自评量表(SDS)评估精神状态,经颅多普勒超声(TCD)评估脑血流速度,以白介素(IL)-6反映炎症情况。结果122例患者中,最终完成试验及随访99例,其中试验组49例,对照组50例。两组患者性别、年龄、基础疾病(高血压、糖尿病、冠心病)及基线NIHSS评分比较,差异无统计学意义(P>0.05)。重复测量方差分析结果示,时间与组别对MMSE、MoCA、mRS、NIHSS、脑血流速度、IL-6存在交互作用(P<0.05),时间和组别对MMSE、MoCA、NIHSS、脑血流速度、IL-6主效应显著(P<0.05),时间对mRS、SAS、SDS、IADL主效应显著(P<0.05)。试验组干预后30、90 d MMSE、MoCA评分及脑血流速度均高于对照组,mRS、NIHSS评分均低于对照组(P<0.05);试验组干预后30、90 d SDS、IADL评分低于对照组(P<0.05);试验组干预后30 d SAS评分高于对照组,IL-6低于对照组(P<0.05)。99例患者中共有23例患者发生不良反应,其中试验组17例,对照组6例,两组皮肤瘀点、头晕、心慌、胸闷发生率比较,差异无统计学意义(P>0.05);对照组患者皮肤瘀斑发生率[4.00%(2/50)与12.24%(6/49)]、总不良反应发生率[12.00%(6/50)与34.69%(17/49)]低于试验组(P<0.05)。结论RIPostC治疗可降低AIS患者的炎症反应,对神经功能、认知功能抑郁情绪及颅内血流速度可起到积极的改善效果。展开更多
青稞(Hordeum vulgare L. var. nudum)作为青藏高原特色作物,其蒸散过程对水分利用效率与产量形成至关重要。综述了青稞蒸散组分的研究进展,涵盖了蒸散的概念、研究方法,重点阐述了青稞蒸散各组分(土壤蒸发和作物蒸腾)的影响因素及定量...青稞(Hordeum vulgare L. var. nudum)作为青藏高原特色作物,其蒸散过程对水分利用效率与产量形成至关重要。综述了青稞蒸散组分的研究进展,涵盖了蒸散的概念、研究方法,重点阐述了青稞蒸散各组分(土壤蒸发和作物蒸腾)的影响因素及定量研究成果,讨论了当前研究存在的问题与未来发展方向,旨在为深入了解青稞水分利用规律,优化青稞种植灌溉管理及高原节水农业提供理论支持。展开更多
文摘The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.
基金Projects(50875090,50905063) supported by the National Natural Science Foundation of ChinaProject(2009AA04Z111) supported by the National High Technology Research and Development Program of China+2 种基金Project(20090460769) supported by China Postdoctoral Science FoundationProject(2011ZM0070) supported by the Fundamental Research Funds for the Central Universities in ChinaProject(S2011010001155) supported by the Natural Science Foundation of Guangdong Province,China
文摘In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.
基金Project (60505018) supported by the National Natural Science Foundation of China
文摘Based on the abort strategy of fixed periods, a novel predictive control scheduling methodology was proposed to efficiently solve overrun problems. By applying the latest control value in the prediction sequences to the control objective, the new strategy was expected to optimize the control system for better performance and yet guarantee the schedulability of all tasks under overrun. The schedulability of the real-time systems with p-period overruns was analyzed, and the corresponding stability criteria was given as well. The simulation results show that the new approach can improve the performance of control system compared to that of conventional abort strategy, it can reduce the overshoot and adjust time as well as ensure the schedulability and stability.
文摘In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.
基金Projects(61304203,51409157)supported by the National Natural Science Foundation of ChinaProject(12ZR1444800)supported by the Natural Science Foundation of Shanghai,China
文摘This work considers those road networks in which there are multi-route choices for bifurcation-destination(or origin-destination) pairs, and designs a real-time variable message sign(VMS)-based routing control strategy in the model predictive control(MPC) framework. The VMS route recommendation provided by the traffic management authority is directly considered as the control variable, and the routing control model is established, in which a multi-dimensional control vector is introduced to describe the influence of route recommendations on flow distribution. In the MPC framework, a system optimum routing strategy with the constraints regarding drivers' acceptability with recommended routes is designed, which can not only meet the traffic management authority's control requirement but also improve drivers' satisfaction with the route guidance system. The simulation carried out shows that the proposed routing control can effectively mitigate traffic congestion, reduces followers' time delay, and improves drivers' satisfaction with routing control in road networks.
基金Project(20030533011)supported by the National Research Foundation for the Doctoral Program of Higher Education of China
文摘A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environments. At the mobile hosts, all transactions perform local pre-validation. The local pre-validation process is carried out against the committed transactions at the server in the last broadcast cycle. Transactions that survive in local pre-validation must be submitted to the server for local final validation. The new protocol eliminates conflicts between mobile read-only and mobile update transactions, and resolves data conflicts flexibly by using multiversion dynamic adjustment of serialization order to avoid unnecessary restarts of transactions. Mobile read-only transactions can be committed with no-blocking, and respond time of mobile read-only transactions is greatly shortened. The tolerance of mobile transactions of disconnections from the broadcast channel is increased. In global validation mobile distributed transactions have to do check to ensure distributed serializability in all participants. The simulation results show that the new concurrency control protocol proposed offers better performance than other protocols in terms of miss rate, restart rate, commit rate. Under high work load （think time is ls） the miss rate of DMVOCC-MVDA is only 14.6%, is significantly lower than that of other protocols. The restart rate of DMVOCC-MVDA is only 32.3%, showing that DMVOCC-MVDA can effectively reduce the restart rate of mobile transactions. And the commit rate of DMVOCC-MVDA is up to 61.2%, which is obviously higher than that of other protocols.
文摘背景急性缺血性卒中(AIS)高发,及时恢复脑血流是治疗的关键,超时间窗就诊患者无更多促进脑血流恢复的治疗手段。研究远隔缺血后适应(RIPostC)治疗对AIS超时间窗就诊患者的临床疗效、并发症和预后,具有重要的临床意义。目的探究RIPostC治疗对AIS超时间窗患者干预的影响,为超时间窗就诊的AIS患者寻求安全、有效的脑血流恢复治疗方式。方法本研究采用随机、分组、安慰剂对照法进行试验。选取2021-09-02—2022-08-31于北京航天总医院神经内科病房住院治疗的超溶栓时间窗(发病时间>6 h)的AIS患者为研究对象。依据随机数字表法将患者分为对照组和试验组。试验期+随访期共90 d,均使用同等的一般治疗、脑血管病常规治疗,试验组在此基础上给予RIPostC治疗14 d(28次),对照组给予模拟的RIPostC治疗14 d(28次)。在干预前和干预后30 d、干预后90 d,采用改良Rankin量表(mRS)、美国国立卫生研究院卒中量表(NIHSS)评估两组患者神经功能,简易精神状态检查量表(MMSE)、蒙特利尔认知评估量表(MoCA)评估患者认知功能,工具性日常生活能力量表(IADL)评估日常生活能力,焦虑自评量表(SAS)、抑郁自评量表(SDS)评估精神状态,经颅多普勒超声(TCD)评估脑血流速度,以白介素(IL)-6反映炎症情况。结果122例患者中,最终完成试验及随访99例,其中试验组49例,对照组50例。两组患者性别、年龄、基础疾病(高血压、糖尿病、冠心病)及基线NIHSS评分比较,差异无统计学意义(P>0.05)。重复测量方差分析结果示,时间与组别对MMSE、MoCA、mRS、NIHSS、脑血流速度、IL-6存在交互作用(P<0.05),时间和组别对MMSE、MoCA、NIHSS、脑血流速度、IL-6主效应显著(P<0.05),时间对mRS、SAS、SDS、IADL主效应显著(P<0.05)。试验组干预后30、90 d MMSE、MoCA评分及脑血流速度均高于对照组,mRS、NIHSS评分均低于对照组(P<0.05);试验组干预后30、90 d SDS、IADL评分低于对照组(P<0.05);试验组干预后30 d SAS评分高于对照组,IL-6低于对照组(P<0.05)。99例患者中共有23例患者发生不良反应,其中试验组17例,对照组6例,两组皮肤瘀点、头晕、心慌、胸闷发生率比较,差异无统计学意义(P>0.05);对照组患者皮肤瘀斑发生率[4.00%(2/50)与12.24%(6/49)]、总不良反应发生率[12.00%(6/50)与34.69%(17/49)]低于试验组(P<0.05)。结论RIPostC治疗可降低AIS患者的炎症反应,对神经功能、认知功能抑郁情绪及颅内血流速度可起到积极的改善效果。
文摘青稞(Hordeum vulgare L. var. nudum)作为青藏高原特色作物,其蒸散过程对水分利用效率与产量形成至关重要。综述了青稞蒸散组分的研究进展,涵盖了蒸散的概念、研究方法,重点阐述了青稞蒸散各组分(土壤蒸发和作物蒸腾)的影响因素及定量研究成果,讨论了当前研究存在的问题与未来发展方向,旨在为深入了解青稞水分利用规律,优化青稞种植灌溉管理及高原节水农业提供理论支持。
