The problem of fusing multiagent preference orderings, with information on agent＇s importance being incomplete certain with respect to a set of possible courses of action, is described. The approach is developed for ...The problem of fusing multiagent preference orderings, with information on agent＇s importance being incomplete certain with respect to a set of possible courses of action, is described. The approach is developed for dealing with the fusion problem described in the following sections and requires that each agent provides a preference ordering over the different alternatives completely independent of the other agents, and the information on agent＇s importance is incomplete certain. In this approach, the ternary comparison matrix of the alternatives is constructed, the eigenvector associated with the maximum eigenvalue of the ternary comparison matrix is attained so as to normalize priority vector of the alternatives. The interval number of the alternatives is then obtained by solving two sorts of linear programming problems. By comparing the interval numbers of the alternatives, the ranking of alternatives can be generated. Finally, some examples are given to show the feasibility and effectiveness of the method.展开更多
为了客观评价地下空间开发地质适宜性并为评价工作提供一种新思路和参考,提出了一种基于三角模糊数的模糊层次分析法(fuzzy analytic hierarchy process based on triangular fuzzy numbers,FAHP)和优劣解距离法(technique for order pr...为了客观评价地下空间开发地质适宜性并为评价工作提供一种新思路和参考,提出了一种基于三角模糊数的模糊层次分析法(fuzzy analytic hierarchy process based on triangular fuzzy numbers,FAHP)和优劣解距离法(technique for order preference by similarity to ideal solution,TOPSIS)相结合的评价方法。通过地质调查研究构建基于土体工程地质性质、水文地质条件、不良地质作用、地形地貌等影响因素为主的层次分析关系模型。基于专家判别利用FAHP计算各评价因素的权重,以各评价指标层的分级临界值作为典型评价样本,利用TOPSIS法对适宜性等级进行非等分划分,基于区间值优化的TOPSIS法建立最终评价模型,通过ArcGIS的空间分析功能等确定每个评价单元适宜性等级。该方法与传统方法相比一定程度上减少了评价过程中专家评判的过多主观影响,评价过程更倾向于定量化,结果更为客观。利用该方法对无锡市区浅层地下空间开发地质适宜性进行评价,评价结果与实际工程经验相符,证明了该方法的有效性,因此该方法对地下空间开发适宜性评价工作具有一定借鉴意义。展开更多
In this paper , some examples are given to show that the maximal number of admissible preference orderings is greater than 2n-1 when n is greater than 3. And the recurrence formula of local maximal number is presented.
The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis （DEA） extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit （DM...The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis （DEA） extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit （DMU） with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution （TOPSIS） is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.展开更多
Supplier selection can be regarded as a typical multiple attribute decision-making problem. In real-world situation, the values of the alternative attributes and their weights are always being nondeterministic, and as...Supplier selection can be regarded as a typical multiple attribute decision-making problem. In real-world situation, the values of the alternative attributes and their weights are always being nondeterministic, and as a result of this, the values are considered interval numbers. In addition, the common approach to measure the similarity between alternatives through their distance suffers from some minor shortcomings. To address these problems, this study develops a novel hybrid decision-making method by combining the technique for order preference by similarity to an ideal solution （TOPSIS） with grey relational analysis （GRA） for supplier selection with interval numbers. By introducing the intervals theory, the extensions of Euclidean distance and grey relational grade are defined. And then a new comprehensive closeness coefficient is constituted for supplier alternatives evaluation based on the interval Euclidean distance and the interval grey relational grade, which could indicate the distance-based similarity and the shape-based similarity simultaneously. A mtmerical example is taken to validate the flexibility of the proposed method, and result shows that this method can tackle the uncertainty in real-world supplier selection and also help decision makers to effectively select optimal suppliers.展开更多
随着市场竞争愈发激烈、全球环境日益恶化以及公众环保意识的提高,绿色采购问题受到了广泛关注。现有研究绝大多数聚焦于考虑绿色准则的供应商选择问题,以实现可持续经营。然而,在综合考虑时间、价格和成本等因素的前提下,从适应性强的...随着市场竞争愈发激烈、全球环境日益恶化以及公众环保意识的提高,绿色采购问题受到了广泛关注。现有研究绝大多数聚焦于考虑绿色准则的供应商选择问题,以实现可持续经营。然而,在综合考虑时间、价格和成本等因素的前提下,从适应性强的供应商处获得适当的产品,对于企业来说更为可行和经济,即供应商选择和订单分配。为了解决上述关键问题,提出了一种模糊环境下的多准则群体决策方法。提出了一种基于理想解相似性偏好排序和层次分析法(technique for order of preference by similarity to ideal solution and analytic hierarchy process,TOPSIS-AHP)的模糊排序方法,该方法可根据企业战略灵活调整传统准则和绿色准则的权重。在双目标优化模型中引入供应商排名进行订货,在实现采购绩效最大化的同时,最大限度地降低采购成本。结果表明:所提方法能够有效评价供应商绩效,并优化候选供应商之间的订单分配。展开更多
The missile-tracked priority assessment for the early warning system monitoring multi-missile very well, is the first task to defend them and useful to perform optimally the sensor-to-missile assignment. The problem o...The missile-tracked priority assessment for the early warning system monitoring multi-missile very well, is the first task to defend them and useful to perform optimally the sensor-to-missile assignment. The problem of the missile-tracked priority assessment is of incomplete information, of multi-attribute and dynamic. To solve the dificult problem, the index system, which includes six classification indices, is established by means of reducing the target＇s primary information which the early warning system focuses on. The lack of some attributes values, which is caused by the incomplete information, is handled by the approach： first classifying each attribute as unknown one or known one, and then subdividing the latter, last using the expectation and the information entropy if the attribute is known but uncertain. With a view of reality, nine qualitative evaluation criteria are given. Based on them each index is quantified by the eigenvector method. And then based on the improved technique for order preference by similarity to ideal solution （TOPSIS）, the targets-tracked priorities are assessed and sorted by an evaluation function from three aspects： 1） the quantity of the available information, 2） the affirmative or accurate degree of the available information, 3） the classification or trait of the available information.展开更多
The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation ...The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.展开更多
Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanoc...Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.展开更多
With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matchi...With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matching perspective,for it not only satisfies natural development of smart complex equipment,it is also a good implementation of equipment project in central-private enterprises integration context.In in this paper,we carry out two parts of research,one is evaluation attributes based on comprehensive analysis,and the other is matching process between key suppliers and core components based on the matching attribute.In practical analysis process,we employ comprehensive evaluated analysis methods to acquire relevant attributes for the matching process that follows.In the analysis process,we adopt entropy-maximum deviation method(MDM)-decision-making trial and evaluation laboratory(DEMATEL)-technique for order preference by similarity to an ideal solution(TOPSIS)to obtain a comprehensive analysis.The entropy-MDM is applied to get weight value,DEMATEL is utilized to obtain internal relations,and TOPSIS is adopted to get ideal evaluated solution.We consider aggregating two types of evaluation information according to similarities of smart complex equipment based on the combination between geometric mean and arithmetic mean.Moreover,based on the aforementioned attributes and generalized power Heronian mean operator,we aggregate preference information to acquire relevant satisfaction degree,then combine the constructed matching model to get suitable key supplier.Through comprehensive analysis of selecting suitable suppliers,we know that two-sided matching and information aggregation can provide more research perspectives for smart complex equipment.Through analysis for relevant factors,we find that leading role and service level are also significant for the smart complex equipment development process.展开更多
Classifying and ranking the huge amounts of landscape planning works of urban wetland park is always difficult due to the multi-functions （ecological, leisure, educational and disaster prevention） of the urban wetla...Classifying and ranking the huge amounts of landscape planning works of urban wetland park is always difficult due to the multi-functions （ecological, leisure, educational and disaster prevention） of the urban wetland park. Therefore, an optimizing rank system is urgently needed. Analytic Hierarchy Process （AHP） and Technique for Order Preference by Similarity to Ideal Solution （TOPSIS） models were used to rank the planning works of 30 urban wetland park based on four mainly factors, which included landscape ecological planning, landscape planning, ecological planning and economic planning. The study indicated that the AHP- TOPSIS model had good discrimination in the classification and ranking of landscape planning works of urban wetland park and it was also applicable to the planning works of other urban greenbelts.展开更多
In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimal design of the automotive energy absorbing components. Mo...In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimal design of the automotive energy absorbing components. Modified non-dominated sorting genetic algorithm II(NSGA II) was used for multi-objective optimization of automotive S-rail considering absorbed energy(E), peak crushing force(Fmax) and mass of the structure(W) as three conflicting objective functions. In the multi-objective optimization problem(MOP), E and Fmax are defined by polynomial models extracted using the software GEvo M based on train and test data obtained from numerical simulation of quasi-static crushing of the S-rail using ABAQUS. Finally, the nearest to ideal point(NIP)method and technique for ordering preferences by similarity to ideal solution(TOPSIS) method are used to find the some trade-off optimum design points from all non-dominated optimum design points represented by the Pareto fronts. Results represent that the optimum design point obtained from TOPSIS method exhibits better trade-off in comparison with that of optimum design point obtained from NIP method.展开更多
基金This project was supported by the National Natural Science Foundation of China(70631004).
文摘The problem of fusing multiagent preference orderings, with information on agent＇s importance being incomplete certain with respect to a set of possible courses of action, is described. The approach is developed for dealing with the fusion problem described in the following sections and requires that each agent provides a preference ordering over the different alternatives completely independent of the other agents, and the information on agent＇s importance is incomplete certain. In this approach, the ternary comparison matrix of the alternatives is constructed, the eigenvector associated with the maximum eigenvalue of the ternary comparison matrix is attained so as to normalize priority vector of the alternatives. The interval number of the alternatives is then obtained by solving two sorts of linear programming problems. By comparing the interval numbers of the alternatives, the ranking of alternatives can be generated. Finally, some examples are given to show the feasibility and effectiveness of the method.
文摘为了客观评价地下空间开发地质适宜性并为评价工作提供一种新思路和参考,提出了一种基于三角模糊数的模糊层次分析法(fuzzy analytic hierarchy process based on triangular fuzzy numbers,FAHP)和优劣解距离法(technique for order preference by similarity to ideal solution,TOPSIS)相结合的评价方法。通过地质调查研究构建基于土体工程地质性质、水文地质条件、不良地质作用、地形地貌等影响因素为主的层次分析关系模型。基于专家判别利用FAHP计算各评价因素的权重,以各评价指标层的分级临界值作为典型评价样本,利用TOPSIS法对适宜性等级进行非等分划分,基于区间值优化的TOPSIS法建立最终评价模型,通过ArcGIS的空间分析功能等确定每个评价单元适宜性等级。该方法与传统方法相比一定程度上减少了评价过程中专家评判的过多主观影响,评价过程更倾向于定量化,结果更为客观。利用该方法对无锡市区浅层地下空间开发地质适宜性进行评价,评价结果与实际工程经验相符,证明了该方法的有效性,因此该方法对地下空间开发适宜性评价工作具有一定借鉴意义。
文摘In this paper , some examples are given to show that the maximal number of admissible preference orderings is greater than 2n-1 when n is greater than 3. And the recurrence formula of local maximal number is presented.
基金supported by the National Natural Science Foundation of China for Innovative Research Groups(70821001),the National Natural Science Foundation of China(70901069)the Special Fund for the Gainers of Excellent Ph.D.'s Dissertations and Dean's Scholarships of Chinese Academy of Sciences,the Research Fund for the Doctoral Program of Higher Education of China for New Teachers(20093402120013)+1 种基金the Research Fund for the Excellent Youth Scholars of Higher School of Anhui Province of China(2010SQRW001ZD)the Social Science Research Fund for Higher School of Anhui Province of China
文摘The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis （DEA） extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit （DMU） with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution （TOPSIS） is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.
基金Project(51505488)supported by the National Natural Science Foundation of China
文摘Supplier selection can be regarded as a typical multiple attribute decision-making problem. In real-world situation, the values of the alternative attributes and their weights are always being nondeterministic, and as a result of this, the values are considered interval numbers. In addition, the common approach to measure the similarity between alternatives through their distance suffers from some minor shortcomings. To address these problems, this study develops a novel hybrid decision-making method by combining the technique for order preference by similarity to an ideal solution （TOPSIS） with grey relational analysis （GRA） for supplier selection with interval numbers. By introducing the intervals theory, the extensions of Euclidean distance and grey relational grade are defined. And then a new comprehensive closeness coefficient is constituted for supplier alternatives evaluation based on the interval Euclidean distance and the interval grey relational grade, which could indicate the distance-based similarity and the shape-based similarity simultaneously. A mtmerical example is taken to validate the flexibility of the proposed method, and result shows that this method can tackle the uncertainty in real-world supplier selection and also help decision makers to effectively select optimal suppliers.
基金National Key Research and Development Program of China Under Grant(2020YFB1712203)。
文摘随着市场竞争愈发激烈、全球环境日益恶化以及公众环保意识的提高,绿色采购问题受到了广泛关注。现有研究绝大多数聚焦于考虑绿色准则的供应商选择问题,以实现可持续经营。然而,在综合考虑时间、价格和成本等因素的前提下,从适应性强的供应商处获得适当的产品,对于企业来说更为可行和经济,即供应商选择和订单分配。为了解决上述关键问题,提出了一种模糊环境下的多准则群体决策方法。提出了一种基于理想解相似性偏好排序和层次分析法(technique for order of preference by similarity to ideal solution and analytic hierarchy process,TOPSIS-AHP)的模糊排序方法,该方法可根据企业战略灵活调整传统准则和绿色准则的权重。在双目标优化模型中引入供应商排名进行订货,在实现采购绩效最大化的同时,最大限度地降低采购成本。结果表明:所提方法能够有效评价供应商绩效,并优化候选供应商之间的订单分配。
基金supported by the National Ministry Foundation for the Pre-research
文摘The missile-tracked priority assessment for the early warning system monitoring multi-missile very well, is the first task to defend them and useful to perform optimally the sensor-to-missile assignment. The problem of the missile-tracked priority assessment is of incomplete information, of multi-attribute and dynamic. To solve the dificult problem, the index system, which includes six classification indices, is established by means of reducing the target＇s primary information which the early warning system focuses on. The lack of some attributes values, which is caused by the incomplete information, is handled by the approach： first classifying each attribute as unknown one or known one, and then subdividing the latter, last using the expectation and the information entropy if the attribute is known but uncertain. With a view of reality, nine qualitative evaluation criteria are given. Based on them each index is quantified by the eigenvector method. And then based on the improved technique for order preference by similarity to ideal solution （TOPSIS）, the targets-tracked priorities are assessed and sorted by an evaluation function from three aspects： 1） the quantity of the available information, 2） the affirmative or accurate degree of the available information, 3） the classification or trait of the available information.
基金supported by the National Natural Science Foundation of China(41804035,41374027)。
文摘The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.
文摘Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.
文摘With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matching perspective,for it not only satisfies natural development of smart complex equipment,it is also a good implementation of equipment project in central-private enterprises integration context.In in this paper,we carry out two parts of research,one is evaluation attributes based on comprehensive analysis,and the other is matching process between key suppliers and core components based on the matching attribute.In practical analysis process,we employ comprehensive evaluated analysis methods to acquire relevant attributes for the matching process that follows.In the analysis process,we adopt entropy-maximum deviation method(MDM)-decision-making trial and evaluation laboratory(DEMATEL)-technique for order preference by similarity to an ideal solution(TOPSIS)to obtain a comprehensive analysis.The entropy-MDM is applied to get weight value,DEMATEL is utilized to obtain internal relations,and TOPSIS is adopted to get ideal evaluated solution.We consider aggregating two types of evaluation information according to similarities of smart complex equipment based on the combination between geometric mean and arithmetic mean.Moreover,based on the aforementioned attributes and generalized power Heronian mean operator,we aggregate preference information to acquire relevant satisfaction degree,then combine the constructed matching model to get suitable key supplier.Through comprehensive analysis of selecting suitable suppliers,we know that two-sided matching and information aggregation can provide more research perspectives for smart complex equipment.Through analysis for relevant factors,we find that leading role and service level are also significant for the smart complex equipment development process.
基金Supported by Henan Major Scientific and Technological Project (102102310246)
文摘Classifying and ranking the huge amounts of landscape planning works of urban wetland park is always difficult due to the multi-functions （ecological, leisure, educational and disaster prevention） of the urban wetland park. Therefore, an optimizing rank system is urgently needed. Analytic Hierarchy Process （AHP） and Technique for Order Preference by Similarity to Ideal Solution （TOPSIS） models were used to rank the planning works of 30 urban wetland park based on four mainly factors, which included landscape ecological planning, landscape planning, ecological planning and economic planning. The study indicated that the AHP- TOPSIS model had good discrimination in the classification and ranking of landscape planning works of urban wetland park and it was also applicable to the planning works of other urban greenbelts.
文摘In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimal design of the automotive energy absorbing components. Modified non-dominated sorting genetic algorithm II(NSGA II) was used for multi-objective optimization of automotive S-rail considering absorbed energy(E), peak crushing force(Fmax) and mass of the structure(W) as three conflicting objective functions. In the multi-objective optimization problem(MOP), E and Fmax are defined by polynomial models extracted using the software GEvo M based on train and test data obtained from numerical simulation of quasi-static crushing of the S-rail using ABAQUS. Finally, the nearest to ideal point(NIP)method and technique for ordering preferences by similarity to ideal solution(TOPSIS) method are used to find the some trade-off optimum design points from all non-dominated optimum design points represented by the Pareto fronts. Results represent that the optimum design point obtained from TOPSIS method exhibits better trade-off in comparison with that of optimum design point obtained from NIP method.
