Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomen...Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomenon during particle migration, significantly impacts the deep plugging effect. Due to the complexity of the process, few studies have been conducted on this subject. In this paper, we conducted DGP flow experiments using a physical model of a multi-point sandpack under various injection rates and particle sizes. Particle size and concentration tests were performed at each measurement point to investigate the transportation behavior of particles in the deep part of the reservoir. The residual resistance coefficient and concentration changes along the porous media were combined to analyze the plugging performance of DGPs. Furthermore, the particle breakage along their path was revealed by analyzing the changes in particle size along the way. A mathematical model of breakage and concentration changes along the path was established. The results showed that the passage after breakage is a significant migration behavior of particles in porous media. The particles were reduced to less than half of their initial size at the front of the porous media. Breakage is an essential reason for the continuous decreases in particle concentration, size, and residual resistance coefficient. However, the particles can remain in porous media after breakage and play a significant role in deep plugging. Higher injection rates or larger particle sizes resulted in faster breakage along the injection direction, higher degrees of breakage, and faster decreases in residual resistance coefficient along the path. These conditions also led to a weaker deep plugging ability. Smaller particles were more evenly retained along the path, but more particles flowed out of the porous media, resulting in a poor deep plugging effect. The particle size is a function of particle size before injection, transport distance, and different injection parameters(injection rate or the diameter ratio of DGP to throat). Likewise, the particle concentration is a function of initial concentration, transport distance, and different injection parameters. These models can be utilized to optimize particle injection parameters, thereby achieving the goal of fine-tuning oil displacement.展开更多
A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,in...A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.展开更多
A physical simulation method with a combination of dynamic displacement and imbibition was established by integrating nuclear magnetic resonance(NMR)and CT scanning.The microscopic production mechanism of tight/shale ...A physical simulation method with a combination of dynamic displacement and imbibition was established by integrating nuclear magnetic resonance(NMR)and CT scanning.The microscopic production mechanism of tight/shale oil in pore throat by dynamic imbibition and the influencing factors on the development effect of dynamic imbibition were analyzed.The dynamic seepage process of fracking-soaking-backflow-production integration was simulated,which reveals the dynamic production characteristics at different development stages and their contribution to enhancing oil recovery(EOR).The seepage of tight/shale reservoirs can be divided into three stages:strong displacement and weak imbibition as oil produced rapidly by displacement from macropores and fractures,weak displacement and strong imbibition as oil produced slowly by reverse imbibition from small pores,and weak displacement and weak imbibition at dynamic equilibrium.The greater displacement pressure results in the higher displacement recovery and the lower imbibition recovery.However,if the displacement pressure is too high,the injected water is easy to break through the front and reduce the recovery degree.The higher the permeability,the greater the imbibition and displacement recovery,the shorter the time of imbibition balance,and the higher the final recovery.The fractures can effectively increase the imbibition contact area between matrix and water,reduce the oil-water seepage resistance,promote the oil-water displacement between matrix and fracture,and improve the oil displacement rate and recovery of the matrix.The soaking after fracturing is beneficial to the imbibition replacement and energy storage of the fluid;also,the effective use of the carrying of the backflow fluid and the displacement in the mining stage is the key to enhancing oil recovery.展开更多
Quantitative description of the high-capacity channels in unconsolidated sandstone reservoirs, into which water was injected to improve oil recovery, is a hot topic in the field of reservoir development. This paper pr...Quantitative description of the high-capacity channels in unconsolidated sandstone reservoirs, into which water was injected to improve oil recovery, is a hot topic in the field of reservoir development. This paper presents a novel approach to describing quantitatively the characteristics of connected macropores in unconsolidated sandstone reservoirs using in situ production data. Based on physical simulation for formation mechanisms of high capacity channels and interwell tracer test data, a mathematical model was established to describe high-capacity channels by grey correlation theory, flow mechanism of fluid in porous media and reservoir engineering, and a program was developed to describe quantitatively the channel characteristics. The predicted results were consistent with field monitoring data （80%）, so this model could be economically and effectively used to identify high-capacity channels.展开更多
Combined with NMR,core experiment,slim-tube tests,nano-CT and oil composition analysis,the mechanism of CO(2) enhanced oil recovery had been studied.CO_(2) flooding under supercritical state could achieve higher oil r...Combined with NMR,core experiment,slim-tube tests,nano-CT and oil composition analysis,the mechanism of CO(2) enhanced oil recovery had been studied.CO_(2) flooding under supercritical state could achieve higher oil recovery.In the process of crude oil displaced by supercritical CO2,the average oil recovery was 46.98% at low displacement pressures and 73.35% at high displacement pressures.The permeability of cores after CO2 flooding was only 28%-64% of those before flooding.As to the expelled oil,the contents of asphaltenes and non-hydrocarbons decreased,and saturated hydrocarbons of above C25 were absent in some samples,indicating that they had been retained in cores as demonstrated by CT and NMR experiments.In slim-tube tests,the heavy components of oil were expelled when the pressure increased to 30 MPa.There was a reasonable bottom hole pressure(BHP) below which the heavy components driven out from the far-well zone would deposit in the near-well zone,and when the pressure was too high,the nonhydrocarbon detention may cause block.The smaller throat and worse physical properties the porous media had,the higher displacement pressure would be required to achieve a good oil displacement efficiency.The increase in displacement pressure or time of interaction between oil and CO2 could effectively enhance oil recovery.展开更多
The behavior of stress wave propagation in rock walls and the process of rock bursts were simulated by application tests of material similar to rock. Results show that 1) the attenuation characteristics of stress wave...The behavior of stress wave propagation in rock walls and the process of rock bursts were simulated by application tests of material similar to rock. Results show that 1) the attenuation characteristics of stress waves were related to the material proper-ties, stress waves attenuate more quickly in soft material and 2) when the explosion load was applied at the top of the roadway, the number and the length of the cracks increased with a decrease in the distance between the explosive point and roof of the roadway. When the distance was 280 mm, only some chips appeared near the source, when the distance was 210 mm, some small cracks started to appear near the road-rib and when the distance was reduced to 140 mm, larger cracks appeared at the road-rib. It can be concluded that, under a given stress the number of cracks is closely related to the intensity of stress waves. The cracks in the sur-rounding rock can be reduced by controlling the intensity of the stress waves and rock bursts can be avoided to some extent by pre-venting the formation of layered crack structures. A new experimental approach has been provided for studying rock bursts by using physical simulation.展开更多
To establish the relationship among reservoir characteristics and rock physical parameters,we construct the well-bore rock physical models firstly,considering the influence factors,such as mineral composition,shale co...To establish the relationship among reservoir characteristics and rock physical parameters,we construct the well-bore rock physical models firstly,considering the influence factors,such as mineral composition,shale content,porosity,fluid type and saturation.Then with analyzing the change rules of elastic parameters along with the above influence factors and the cross-plots among elastic parameters,the sensitive elastic parameters of tight sandstone reservoir are determined,and the rock physics template of sweet spot is constructed to guide pre-stack seismic inversion.The results show that velocity ratio and Poisson impedance are the most sensitive elastic parameters to indicate the lithologic and gas-bearing properties of sweet spot in tight sandstone reservoir.The high-quality sweet spot is characterized by the lower velocity ratio and Poisson impedance.Finally,the actual seismic data are selected to predict the sweet spots in tight sandstone gas reservoirs,so as to verify the validity of the rock physical simulation results.The significant consistency between the relative logging curves and inversion results in different wells implies that the utilization of well-bore rock physical simulation can guide the prediction of sweet spot in tight sandstone gas reservoirs.展开更多
In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the eff...In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the effect of hydrodynamic forces controlling CBM reservoir formations was studied by a physical simulation experiment in which we used CBM reservoir simulation facilities. The hydrodynamic conditions of high coal rank reservoirs in the Qinshui basin were analyzed. Our experiment shows the following results： under strong hydrodynamic alternating action, 6C~ of coalbed methane reservoir changed from the start at -2.95% ~ -3.66%, and the lightening process occurred in phases; the CI-I4 volume reduced from 96.35% to 12.42%; the CO2 vo- lume decreased from 0.75% in sample 1 to 0.68% in sample 2, then rose to 1.13% in sample 3; the N2 volume changed from 2.9% in sample 1 to 86.45% in sample 3. On one hand, these changes show the complexity of CBM reservoir formation; on the other hand, they indicate that strong hydrodynamic actions have an unfavorable impact on CBM reservoir formation. It was found that the gas volume and hydrodynamic intensity were negatively correlated and low hydrodynamic flow conditions might result in highly productive and enriched areas of high rank CBM.展开更多
For extra-low permeability reservoirs, with a permeability of about 0.3×10?3 μm2, fluid flow and production performance in cores were studied. A long core holder with a multi-location piezometric measurement was...For extra-low permeability reservoirs, with a permeability of about 0.3×10?3 μm2, fluid flow and production performance in cores were studied. A long core holder with a multi-location piezometric measurement was specially designed. An artificial long core, about 700 mm long and with a cross section of 45mm×45mm, was used. In the experiment, pressure distribution along the core can be measured in real time. Single phase flow in the core was investigated. Different modes of production in long cores were also simulated including natural depletion, water flooding, and advanced water flooding. Through physical simulation, flow parameters were collected and production characteristics in extra-low permeability cores were studied. From experimental results, it can be seen that fluid flow in extra-low permeability cores is different from that in high permeability cores. Transmission of pressure in extra-low permeability cores is very slow, and it needs a long time for the pressure to become stable. The distribution curve of pressure along the core is nonlinear and the production rate in extra-low permeability reservoirs decreases sharply. The development effects of different production modes in extra-low permeability cores were compared with one another. Among the production modes, advanced water flooding has much potential for effective development of extra-low permeability reservoirs. Natural depletion and conventional water flooding can also be used in early production periods. In addition, the countermeasures and some ideas especially for the potential development of extra-low permeability reservoirs are suggested.展开更多
In order to understand the mechanism of air flooding shale oil, an online physical simulation method for enhanced shale oil recovery by air injection was established by integrating CT scanning and nuclear magnetic res...In order to understand the mechanism of air flooding shale oil, an online physical simulation method for enhanced shale oil recovery by air injection was established by integrating CT scanning and nuclear magnetic resonance(NMR). The development effect of shale oil by air flooding under different depletion pressures, the micro-production characteristics of pore throats with different sizes and the mechanism of shale oil recovery by air flooding were analyzed. The effects of air oxygen content, permeability, gas injection pressure, and fractures on the air flooding effect in shale and crude oil production in pores with different sizes were analyzed. The recovery of shale oil can be greatly improved by injecting air into the depleted shale reservoir, but the oil displacement efficiency and the production degree of different levels of pore throats vary with the injection timing. The higher the air oxygen content and the stronger the low-temperature oxidation, the higher the production degree of pores with different sizes and the higher the shale oil recovery. The higher the permeability and the better the pore throat connectivity, the stronger the fluid flow capacity and the higher the shale oil recovery. As the injection pressure increases, the lower limit of the production degree of pore throats decreases, but gas channeling may occur to cause a premature breakthrough;as a result, the recovery increases and then decreases. Fractures can effectively increase the contact area between gas and crude oil, and increase the air sweep coefficient and matrix oil drainage area by supplying oil to fractures through the matrix, which means that a proper fracturing before air injection can help to improve the oil displacement effect under a reasonable production pressure difference.展开更多
Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclea...Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclear magnetic resonance(NMR)displacement physical simulation and Lattice Boltzmann numerical simulation by using the samples of source rock,reservoir rock and crude oil.In continental lake basins,the dynamic forces driving hydrocarbon generation and expulsion of high-quality source rocks are the foundational power that determines the charging efficiency and accumulation effect of tight oil,the oil migration resistance is a key element that influences the charging efficiency and accumulation effect of tight oil,and the coupling of charging force with pore-throat resistance in tight reservoir controls the tight oil accumulation and sweet spot enrichment.The degree of tight oil enrichment in continental lake basins is controlled by four factors:source rock,reservoir pore-throat size,anisotropy of reservoir structure,and fractures.The high-quality source rocks control the near-source distribution of tight oil,reservoir physical properties and pore-throat size are positively correlated with the degree of tight oil enrichment,the anisotropy of reservoir structure reveals that the parallel migration rate is the highest,and intralayer fractures can improve the migration and accumulation efficiency and the oil saturation.展开更多
It is important to emphasize the value of research in safe mining technology of high-risk water outburst coal seams. We describe briefly current conditions abroad and in China. Based on an Ordovician limestone aquifer...It is important to emphasize the value of research in safe mining technology of high-risk water outburst coal seams. We describe briefly current conditions abroad and in China. Based on an Ordovician limestone aquifer with high-risk water outburst seams in the Feicheng coal field, we analyzed the water-resistant characteristics of a coal floor aquifuge and the behavior of water head intrusion of a confined aquifer and propose a safe criterion model and relevant technology of mining above aquifers. This has brought satisfactory results in engineering practice.展开更多
Due to the tremendous amount of high-resolution measurement information,array laterolog is widely used in evaluations of deviated anisotropic reservoirs.However,the precision of a complementary numerical simulation sh...Due to the tremendous amount of high-resolution measurement information,array laterolog is widely used in evaluations of deviated anisotropic reservoirs.However,the precision of a complementary numerical simulation should be improved as high as the core of fine-scale reservoir evaluation.Therefore,the 3D finite element method(3D-FEM)is presented to simulate the array laterolog responses.Notably,a downscaled physical simulation system is introduced to validate and calibrate the precision of the 3D-FEM.First,the size of the downscaled system is determined by COMSOL.Then,the surrounding and investigated beds are represented by a sodium chloride solution and planks soaked in solution,respectively.Finally,a half-space measurement scheme is presented to improve the experimental efficiency.Moreover,the corresponding sensitivity function and separation factor are established to analyze the effects of the formation anisotro py and dipping angle on the array laterolog responses.The numerical and experimental results indicate that the half-space method is practical,and the mean relative error between the numerical and experimental results is less than 5%,which indicates that the numerical simulation is accurate.With the proposed approach,the reversal angle of array laterolog response curves in anisotropic formations can be observed,and this range is determined to be 50°-62°.展开更多
Based on seismic and drilling data,the reactivation mechanism of the pre-existing basement F4 strike-slip faultin Nanpu sag and its controlling effect on hydrocarbon accumulation difference are systematically studied....Based on seismic and drilling data,the reactivation mechanism of the pre-existing basement F4 strike-slip faultin Nanpu sag and its controlling effect on hydrocarbon accumulation difference are systematically studied.By defining fault activation stages,back-stripping fault throw and physical modeling,it is found that the Nanpu No.4 structural zone formed by the Cenozoic reactivity of the F4 fault grew from south to north,with strike-slip deformation dominated in the south and extensional deformation dominated in the north.Faults in the No.4 structural zone and those in the adjacent No.2 and No.3 structural zones were different fault systems,which grew separately,contacted and connected,and finally interwove under the action of unified stress field.By constructing the identification chart of deformation mechanisms of reactivation of pre-existing faults,it is concluded that during the sedimentary period of the Paleogene Shahejie Formation,F4 fault was reactivated by strike-slip faulting,and during the sedimentary period of Paleogene Dongying Formation and Neogene Guantao-Minghuazhen formations,it was reactivated by oblique extension.The controlling effects of Cenozoic reactivation of F4 fault on hydrocarbon accumulation include:(1)As the oil-source fault,it controlled the vertical cross-layer migration of oil and gas.(2)It gave rise to strike-slip transfer zone to control the distribution of sand bodies.(3)It grew upward and interacted with faults in the neighboring area,controlling the formation of two types of traps,and was favorable for oil and gas accumulation.展开更多
To analyze the overlying strata movement law of recovering room mining standing pillars with solid backfilling.Physical simulation experiments with sponge and wood as the backfilling simulation material were tested.Th...To analyze the overlying strata movement law of recovering room mining standing pillars with solid backfilling.Physical simulation experiments with sponge and wood as the backfilling simulation material were tested.The results show that:(i) The covering-rock mechanics of the overly strata comes from "two-arch structures + hinged girder + bend beam" to "backfilling material + hinged girder + bent beam" by increasing the fill ratio from 0%to 85%,the beginning of overlying strata movement appears later and the total duration of subsidence velocity increased from zero to the highest value increases.The trend of "single polarization" of the subsidence velocity curves becomes noticeable and the velocity variation trend becomes stable,(ii) The equiponderate aeolian sand was added to improve the anti-pressure ability of the loess,and the corresponding ground processing & transportation system was designed.展开更多
A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to in...A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to investigate laws of gas and water flow and their distribution, and controlling factors during the gas charging process in low-permeability(tight) sandstone reservoir. By describing features of gas-water flow and distribution and their variations in the micro-nano pore system, it is found that the gas charging in the low permeability(tight) sandstone can be divided into two stages, expansion stage and stable stage. In the expansion stage, the gas flows continuously first into large-sized pores then small-sized pores, and first into centers of the pores then edges of pores;pore-throats greater than 20 μm in radius make up the major pathway for gas charging. With the increase of charging pressure, movable water in the edges of large-sized pores and in the centers of small pores is displaced out successively. Pore-throats of 20-50 μm in radius and pore-throats less than 20 μm in radius dominate the expansion of gas charging channels at different stages of charging in turn, leading to reductions in pore-throat radius, throat length and coordination number of the pathway, which is the main increase stage of gas permeability and gas saturation. Among which, pore-throats 30-50 μm in radius control the increase pattern of gas saturation. In the stable stage, gas charging pathways have expanded to the maximum, so the pathways keep stable in pore-throat radius, throat length, and coordination number, and irreducible water remains in the pore system, the gas phase is in concentrated clusters, while the water phase is in the form of dispersed thin film, and the gas saturation and gas permeability tend stable. Connected pore-throats less than 20 μm in radius control the expansion limit of the charging pathways, the formation of stable gas-water distribution, and the maximum gas saturation. The heterogeneity of connected pore-throats affects the dynamic variations of gas phase charging and gas-water distribution. It can be concluded that the pore-throat configuration and heterogeneity of the micro-nanometer pore system control the dynamic variations of the low-permeability(tight) sandstone gas charging process and gas-water distribution features.展开更多
Overburden rock movements and fracture developments occur during mining activities. Consequently, relief gas reservoirs and migration in coal seams being mined as well as in near distant coal seams appear. We consider...Overburden rock movements and fracture developments occur during mining activities. Consequently, relief gas reservoirs and migration in coal seams being mined as well as in near distant coal seams appear. We considered a gas disaster management project and rules on stope relief of gas flows together and explored a gas reservoir and the evolution of stope surrounding rock fractures in the process of mining near distant protective layers by physical simulation, numerical simulation and field testing. Different techniques provide evidence of the rules of interaction of gas reservoirs and the evolution of surrounding rock fractures and are able to find accurately the gas-rich regions around the stope. Finally, we found that these rules can provide a basis for taking measures to prevent gas accidents in the protective layer of the coalface as well as for demonstrating and designing programs to drain high concentrations of gas from the gob.展开更多
The water abundance of mine floor limestone needs to be solved urgently as the average depth of coal mining in China has increased gradually. A method is presented to discuss water abundance with the numerical and phy...The water abundance of mine floor limestone needs to be solved urgently as the average depth of coal mining in China has increased gradually. A method is presented to discuss water abundance with the numerical and physical layered geoelectrical model being established in the half-space, full-space and full-space with tunnel, respectively. The parameters of water abundance are changed in this study, which includes water quantity, water content and volume of abnormity of water-containing abnormity. Results indicate that the different work fields have different macroscopic influences on the apparent resistivity,and the water abundance parameters of water-containing abnormity have quantitative relationship with the apparent resistivity mean in abnormal regions(three-dimensional space region). The quantitative relationships are shown as following: firstly, the amount of water injection has negative linear correlation with the apparent resistivity mean; secondly, when abnormity is unsaturated, there is a negative power function relationship between water content and apparent resistivity mean; thirdly, the volume of abnormity and apparent resistivity mean behave as a decreasing power function law.展开更多
In this paper,an analytical model is used to analyze the modulated polar mesospheric winter echoes(PMWE).The winter parameters were introduced to simulate the effects of different parameters during the artificial elec...In this paper,an analytical model is used to analyze the modulated polar mesospheric winter echoes(PMWE).The winter parameters were introduced to simulate the effects of different parameters during the artificial electron heating of PMWE.The important role of the charged dust particle in the creation of PMWE is confirmed again.It is found that during the heating of PMWE,the increases of the dust size,dust charge,electron temperature,initial electron density,and ion-neutral collision frequency cause the increase of the electron density irregularity,and hence the PMWE strength.However,with increasing the dust density,the electron density irregularity and the PMWE strength decrease.展开更多
Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pres...Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.展开更多
基金supported by the Major National Science and Technology Project(No.2016ZX05054011)。
文摘Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomenon during particle migration, significantly impacts the deep plugging effect. Due to the complexity of the process, few studies have been conducted on this subject. In this paper, we conducted DGP flow experiments using a physical model of a multi-point sandpack under various injection rates and particle sizes. Particle size and concentration tests were performed at each measurement point to investigate the transportation behavior of particles in the deep part of the reservoir. The residual resistance coefficient and concentration changes along the porous media were combined to analyze the plugging performance of DGPs. Furthermore, the particle breakage along their path was revealed by analyzing the changes in particle size along the way. A mathematical model of breakage and concentration changes along the path was established. The results showed that the passage after breakage is a significant migration behavior of particles in porous media. The particles were reduced to less than half of their initial size at the front of the porous media. Breakage is an essential reason for the continuous decreases in particle concentration, size, and residual resistance coefficient. However, the particles can remain in porous media after breakage and play a significant role in deep plugging. Higher injection rates or larger particle sizes resulted in faster breakage along the injection direction, higher degrees of breakage, and faster decreases in residual resistance coefficient along the path. These conditions also led to a weaker deep plugging ability. Smaller particles were more evenly retained along the path, but more particles flowed out of the porous media, resulting in a poor deep plugging effect. The particle size is a function of particle size before injection, transport distance, and different injection parameters(injection rate or the diameter ratio of DGP to throat). Likewise, the particle concentration is a function of initial concentration, transport distance, and different injection parameters. These models can be utilized to optimize particle injection parameters, thereby achieving the goal of fine-tuning oil displacement.
基金This research was supported by the Major Scientific and Technological Projects of CNPC under grant ZD2019-183-006the National Natural Science Foundation of China(42072234).The authors would like to appreciate all the people,who supported the data,testing,and analyses.Many thanks to the anonymous reviewers,whose comments improve the quality of our manuscript.
文摘A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.
基金Supported by the PetroChina Science and Technology Major Project(2021-117)PetroChina CCUS Major Science and Technology Project(2021ZZ01-03)。
文摘A physical simulation method with a combination of dynamic displacement and imbibition was established by integrating nuclear magnetic resonance(NMR)and CT scanning.The microscopic production mechanism of tight/shale oil in pore throat by dynamic imbibition and the influencing factors on the development effect of dynamic imbibition were analyzed.The dynamic seepage process of fracking-soaking-backflow-production integration was simulated,which reveals the dynamic production characteristics at different development stages and their contribution to enhancing oil recovery(EOR).The seepage of tight/shale reservoirs can be divided into three stages:strong displacement and weak imbibition as oil produced rapidly by displacement from macropores and fractures,weak displacement and strong imbibition as oil produced slowly by reverse imbibition from small pores,and weak displacement and weak imbibition at dynamic equilibrium.The greater displacement pressure results in the higher displacement recovery and the lower imbibition recovery.However,if the displacement pressure is too high,the injected water is easy to break through the front and reduce the recovery degree.The higher the permeability,the greater the imbibition and displacement recovery,the shorter the time of imbibition balance,and the higher the final recovery.The fractures can effectively increase the imbibition contact area between matrix and water,reduce the oil-water seepage resistance,promote the oil-water displacement between matrix and fracture,and improve the oil displacement rate and recovery of the matrix.The soaking after fracturing is beneficial to the imbibition replacement and energy storage of the fluid;also,the effective use of the carrying of the backflow fluid and the displacement in the mining stage is the key to enhancing oil recovery.
文摘Quantitative description of the high-capacity channels in unconsolidated sandstone reservoirs, into which water was injected to improve oil recovery, is a hot topic in the field of reservoir development. This paper presents a novel approach to describing quantitatively the characteristics of connected macropores in unconsolidated sandstone reservoirs using in situ production data. Based on physical simulation for formation mechanisms of high capacity channels and interwell tracer test data, a mathematical model was established to describe high-capacity channels by grey correlation theory, flow mechanism of fluid in porous media and reservoir engineering, and a program was developed to describe quantitatively the channel characteristics. The predicted results were consistent with field monitoring data （80%）, so this model could be economically and effectively used to identify high-capacity channels.
基金financial support from the National Science and Technology Major Project (2017ZX05013-001, 2017ZX05069003, 2017ZX05049005-004)Ministry of Science and Technology of PetroChina (2021ZZ01-03, kt2021-09-05, 2021DJ1806, 2017E-1514, 2018E-11-05)。
文摘Combined with NMR,core experiment,slim-tube tests,nano-CT and oil composition analysis,the mechanism of CO(2) enhanced oil recovery had been studied.CO_(2) flooding under supercritical state could achieve higher oil recovery.In the process of crude oil displaced by supercritical CO2,the average oil recovery was 46.98% at low displacement pressures and 73.35% at high displacement pressures.The permeability of cores after CO2 flooding was only 28%-64% of those before flooding.As to the expelled oil,the contents of asphaltenes and non-hydrocarbons decreased,and saturated hydrocarbons of above C25 were absent in some samples,indicating that they had been retained in cores as demonstrated by CT and NMR experiments.In slim-tube tests,the heavy components of oil were expelled when the pressure increased to 30 MPa.There was a reasonable bottom hole pressure(BHP) below which the heavy components driven out from the far-well zone would deposit in the near-well zone,and when the pressure was too high,the nonhydrocarbon detention may cause block.The smaller throat and worse physical properties the porous media had,the higher displacement pressure would be required to achieve a good oil displacement efficiency.The increase in displacement pressure or time of interaction between oil and CO2 could effectively enhance oil recovery.
基金Projects 50490270 and 50634050 supported by the National Natural Science Foundation of China2007CB209400 by the National Basic Research Program of China2006A039 by the Youth Scientific Research Foundation of China University of Mining & Technology
文摘The behavior of stress wave propagation in rock walls and the process of rock bursts were simulated by application tests of material similar to rock. Results show that 1) the attenuation characteristics of stress waves were related to the material proper-ties, stress waves attenuate more quickly in soft material and 2) when the explosion load was applied at the top of the roadway, the number and the length of the cracks increased with a decrease in the distance between the explosive point and roof of the roadway. When the distance was 280 mm, only some chips appeared near the source, when the distance was 210 mm, some small cracks started to appear near the road-rib and when the distance was reduced to 140 mm, larger cracks appeared at the road-rib. It can be concluded that, under a given stress the number of cracks is closely related to the intensity of stress waves. The cracks in the sur-rounding rock can be reduced by controlling the intensity of the stress waves and rock bursts can be avoided to some extent by pre-venting the formation of layered crack structures. A new experimental approach has been provided for studying rock bursts by using physical simulation.
基金supported by the National Key R&D Program of China(Grant No.2018YFC1405900)the Major Projects of National Science and Technology(Grant Nos.2016ZX05011-002,2016ZX05027-002-005)+3 种基金the National Natural Science Foundation of China(Grant No.41806073)the Natural Science Foundation of Shandong Province(Grant No.ZR2017BD014)Shandong Provincial Key Laboratory of Depositional Mineralization and Sedimentary Minerals,Shandong University of Science and Technology(Grant No.DMSM2017042)the Fundamental Research Funds for the Central Universities(Grant No.201964016)
文摘To establish the relationship among reservoir characteristics and rock physical parameters,we construct the well-bore rock physical models firstly,considering the influence factors,such as mineral composition,shale content,porosity,fluid type and saturation.Then with analyzing the change rules of elastic parameters along with the above influence factors and the cross-plots among elastic parameters,the sensitive elastic parameters of tight sandstone reservoir are determined,and the rock physics template of sweet spot is constructed to guide pre-stack seismic inversion.The results show that velocity ratio and Poisson impedance are the most sensitive elastic parameters to indicate the lithologic and gas-bearing properties of sweet spot in tight sandstone reservoir.The high-quality sweet spot is characterized by the lower velocity ratio and Poisson impedance.Finally,the actual seismic data are selected to predict the sweet spots in tight sandstone gas reservoirs,so as to verify the validity of the rock physical simulation results.The significant consistency between the relative logging curves and inversion results in different wells implies that the utilization of well-bore rock physical simulation can guide the prediction of sweet spot in tight sandstone gas reservoirs.
基金Project 2002CB211705 supported by the National Basic Research Program of China
文摘In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the effect of hydrodynamic forces controlling CBM reservoir formations was studied by a physical simulation experiment in which we used CBM reservoir simulation facilities. The hydrodynamic conditions of high coal rank reservoirs in the Qinshui basin were analyzed. Our experiment shows the following results： under strong hydrodynamic alternating action, 6C~ of coalbed methane reservoir changed from the start at -2.95% ~ -3.66%, and the lightening process occurred in phases; the CI-I4 volume reduced from 96.35% to 12.42%; the CO2 vo- lume decreased from 0.75% in sample 1 to 0.68% in sample 2, then rose to 1.13% in sample 3; the N2 volume changed from 2.9% in sample 1 to 86.45% in sample 3. On one hand, these changes show the complexity of CBM reservoir formation; on the other hand, they indicate that strong hydrodynamic actions have an unfavorable impact on CBM reservoir formation. It was found that the gas volume and hydrodynamic intensity were negatively correlated and low hydrodynamic flow conditions might result in highly productive and enriched areas of high rank CBM.
基金supported by China National Program on Key Basic Research Project (973 Program) (Grant No. 2006CB705805)National Key Scientific and Technological Project (Grant No. 2008ZX05009-004)
文摘For extra-low permeability reservoirs, with a permeability of about 0.3×10?3 μm2, fluid flow and production performance in cores were studied. A long core holder with a multi-location piezometric measurement was specially designed. An artificial long core, about 700 mm long and with a cross section of 45mm×45mm, was used. In the experiment, pressure distribution along the core can be measured in real time. Single phase flow in the core was investigated. Different modes of production in long cores were also simulated including natural depletion, water flooding, and advanced water flooding. Through physical simulation, flow parameters were collected and production characteristics in extra-low permeability cores were studied. From experimental results, it can be seen that fluid flow in extra-low permeability cores is different from that in high permeability cores. Transmission of pressure in extra-low permeability cores is very slow, and it needs a long time for the pressure to become stable. The distribution curve of pressure along the core is nonlinear and the production rate in extra-low permeability reservoirs decreases sharply. The development effects of different production modes in extra-low permeability cores were compared with one another. Among the production modes, advanced water flooding has much potential for effective development of extra-low permeability reservoirs. Natural depletion and conventional water flooding can also be used in early production periods. In addition, the countermeasures and some ideas especially for the potential development of extra-low permeability reservoirs are suggested.
基金Supported by the PetroChina Major Scientific and Technological Research Project (2021DJ1102)PetroChina Science and Technology Major Project (2022kt1001)。
文摘In order to understand the mechanism of air flooding shale oil, an online physical simulation method for enhanced shale oil recovery by air injection was established by integrating CT scanning and nuclear magnetic resonance(NMR). The development effect of shale oil by air flooding under different depletion pressures, the micro-production characteristics of pore throats with different sizes and the mechanism of shale oil recovery by air flooding were analyzed. The effects of air oxygen content, permeability, gas injection pressure, and fractures on the air flooding effect in shale and crude oil production in pores with different sizes were analyzed. The recovery of shale oil can be greatly improved by injecting air into the depleted shale reservoir, but the oil displacement efficiency and the production degree of different levels of pore throats vary with the injection timing. The higher the air oxygen content and the stronger the low-temperature oxidation, the higher the production degree of pores with different sizes and the higher the shale oil recovery. The higher the permeability and the better the pore throat connectivity, the stronger the fluid flow capacity and the higher the shale oil recovery. As the injection pressure increases, the lower limit of the production degree of pore throats decreases, but gas channeling may occur to cause a premature breakthrough;as a result, the recovery increases and then decreases. Fractures can effectively increase the contact area between gas and crude oil, and increase the air sweep coefficient and matrix oil drainage area by supplying oil to fractures through the matrix, which means that a proper fracturing before air injection can help to improve the oil displacement effect under a reasonable production pressure difference.
基金Supported by the National Science and Technology Major Project of China(2016ZX05046-001).
文摘Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclear magnetic resonance(NMR)displacement physical simulation and Lattice Boltzmann numerical simulation by using the samples of source rock,reservoir rock and crude oil.In continental lake basins,the dynamic forces driving hydrocarbon generation and expulsion of high-quality source rocks are the foundational power that determines the charging efficiency and accumulation effect of tight oil,the oil migration resistance is a key element that influences the charging efficiency and accumulation effect of tight oil,and the coupling of charging force with pore-throat resistance in tight reservoir controls the tight oil accumulation and sweet spot enrichment.The degree of tight oil enrichment in continental lake basins is controlled by four factors:source rock,reservoir pore-throat size,anisotropy of reservoir structure,and fractures.The high-quality source rocks control the near-source distribution of tight oil,reservoir physical properties and pore-throat size are positively correlated with the degree of tight oil enrichment,the anisotropy of reservoir structure reveals that the parallel migration rate is the highest,and intralayer fractures can improve the migration and accumulation efficiency and the oil saturation.
基金support for this work, provided by the National Natural Science Foundation of China (No50834005)the National Basic Research Program of China (No2007CB209402)
文摘It is important to emphasize the value of research in safe mining technology of high-risk water outburst coal seams. We describe briefly current conditions abroad and in China. Based on an Ordovician limestone aquifer with high-risk water outburst seams in the Feicheng coal field, we analyzed the water-resistant characteristics of a coal floor aquifuge and the behavior of water head intrusion of a confined aquifer and propose a safe criterion model and relevant technology of mining above aquifers. This has brought satisfactory results in engineering practice.
基金funded by the National Natural Science Foundation of China(41974146,42074134)the Graduate Innovation Project of China University of Petroleum(East China)(YCX2021005)。
文摘Due to the tremendous amount of high-resolution measurement information,array laterolog is widely used in evaluations of deviated anisotropic reservoirs.However,the precision of a complementary numerical simulation should be improved as high as the core of fine-scale reservoir evaluation.Therefore,the 3D finite element method(3D-FEM)is presented to simulate the array laterolog responses.Notably,a downscaled physical simulation system is introduced to validate and calibrate the precision of the 3D-FEM.First,the size of the downscaled system is determined by COMSOL.Then,the surrounding and investigated beds are represented by a sodium chloride solution and planks soaked in solution,respectively.Finally,a half-space measurement scheme is presented to improve the experimental efficiency.Moreover,the corresponding sensitivity function and separation factor are established to analyze the effects of the formation anisotro py and dipping angle on the array laterolog responses.The numerical and experimental results indicate that the half-space method is practical,and the mean relative error between the numerical and experimental results is less than 5%,which indicates that the numerical simulation is accurate.With the proposed approach,the reversal angle of array laterolog response curves in anisotropic formations can be observed,and this range is determined to be 50°-62°.
基金Supported by the Heilongjiang Outstanding Young Talents Support Project(140119002)Research Project of PetroChina Science and Technology Innovation Fund(2020D-5007-0108)PetroChina"14th Five-Year Plan"Science and Technology Project(2021DJ0701).
文摘Based on seismic and drilling data,the reactivation mechanism of the pre-existing basement F4 strike-slip faultin Nanpu sag and its controlling effect on hydrocarbon accumulation difference are systematically studied.By defining fault activation stages,back-stripping fault throw and physical modeling,it is found that the Nanpu No.4 structural zone formed by the Cenozoic reactivity of the F4 fault grew from south to north,with strike-slip deformation dominated in the south and extensional deformation dominated in the north.Faults in the No.4 structural zone and those in the adjacent No.2 and No.3 structural zones were different fault systems,which grew separately,contacted and connected,and finally interwove under the action of unified stress field.By constructing the identification chart of deformation mechanisms of reactivation of pre-existing faults,it is concluded that during the sedimentary period of the Paleogene Shahejie Formation,F4 fault was reactivated by strike-slip faulting,and during the sedimentary period of Paleogene Dongying Formation and Neogene Guantao-Minghuazhen formations,it was reactivated by oblique extension.The controlling effects of Cenozoic reactivation of F4 fault on hydrocarbon accumulation include:(1)As the oil-source fault,it controlled the vertical cross-layer migration of oil and gas.(2)It gave rise to strike-slip transfer zone to control the distribution of sand bodies.(3)It grew upward and interacted with faults in the neighboring area,controlling the formation of two types of traps,and was favorable for oil and gas accumulation.
基金provided by the National Natural Science Foundation of China(No.51074165)the NationalKey Basic Research Program of China(No.2013CB227905)the Qing-Lan Project of China Scholarship Council
文摘To analyze the overlying strata movement law of recovering room mining standing pillars with solid backfilling.Physical simulation experiments with sponge and wood as the backfilling simulation material were tested.The results show that:(i) The covering-rock mechanics of the overly strata comes from "two-arch structures + hinged girder + bend beam" to "backfilling material + hinged girder + bent beam" by increasing the fill ratio from 0%to 85%,the beginning of overlying strata movement appears later and the total duration of subsidence velocity increased from zero to the highest value increases.The trend of "single polarization" of the subsidence velocity curves becomes noticeable and the velocity variation trend becomes stable,(ii) The equiponderate aeolian sand was added to improve the anti-pressure ability of the loess,and the corresponding ground processing & transportation system was designed.
基金Supported by the National Natural Science Foundation of China (41330319 and 42072174)Foundation of China University of Petroleum Beijing (2462020XKBH016)Fellowship of China Postdoctoral Science Foundation (2020M680030)。
文摘A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to investigate laws of gas and water flow and their distribution, and controlling factors during the gas charging process in low-permeability(tight) sandstone reservoir. By describing features of gas-water flow and distribution and their variations in the micro-nano pore system, it is found that the gas charging in the low permeability(tight) sandstone can be divided into two stages, expansion stage and stable stage. In the expansion stage, the gas flows continuously first into large-sized pores then small-sized pores, and first into centers of the pores then edges of pores;pore-throats greater than 20 μm in radius make up the major pathway for gas charging. With the increase of charging pressure, movable water in the edges of large-sized pores and in the centers of small pores is displaced out successively. Pore-throats of 20-50 μm in radius and pore-throats less than 20 μm in radius dominate the expansion of gas charging channels at different stages of charging in turn, leading to reductions in pore-throat radius, throat length and coordination number of the pathway, which is the main increase stage of gas permeability and gas saturation. Among which, pore-throats 30-50 μm in radius control the increase pattern of gas saturation. In the stable stage, gas charging pathways have expanded to the maximum, so the pathways keep stable in pore-throat radius, throat length, and coordination number, and irreducible water remains in the pore system, the gas phase is in concentrated clusters, while the water phase is in the form of dispersed thin film, and the gas saturation and gas permeability tend stable. Connected pore-throats less than 20 μm in radius control the expansion limit of the charging pathways, the formation of stable gas-water distribution, and the maximum gas saturation. The heterogeneity of connected pore-throats affects the dynamic variations of gas phase charging and gas-water distribution. It can be concluded that the pore-throat configuration and heterogeneity of the micro-nanometer pore system control the dynamic variations of the low-permeability(tight) sandstone gas charging process and gas-water distribution features.
基金Project 2005CB221506 supported by the National Basic Research Program of China
文摘Overburden rock movements and fracture developments occur during mining activities. Consequently, relief gas reservoirs and migration in coal seams being mined as well as in near distant coal seams appear. We considered a gas disaster management project and rules on stope relief of gas flows together and explored a gas reservoir and the evolution of stope surrounding rock fractures in the process of mining near distant protective layers by physical simulation, numerical simulation and field testing. Different techniques provide evidence of the rules of interaction of gas reservoirs and the evolution of surrounding rock fractures and are able to find accurately the gas-rich regions around the stope. Finally, we found that these rules can provide a basis for taking measures to prevent gas accidents in the protective layer of the coalface as well as for demonstrating and designing programs to drain high concentrations of gas from the gob.
文摘The water abundance of mine floor limestone needs to be solved urgently as the average depth of coal mining in China has increased gradually. A method is presented to discuss water abundance with the numerical and physical layered geoelectrical model being established in the half-space, full-space and full-space with tunnel, respectively. The parameters of water abundance are changed in this study, which includes water quantity, water content and volume of abnormity of water-containing abnormity. Results indicate that the different work fields have different macroscopic influences on the apparent resistivity,and the water abundance parameters of water-containing abnormity have quantitative relationship with the apparent resistivity mean in abnormal regions(three-dimensional space region). The quantitative relationships are shown as following: firstly, the amount of water injection has negative linear correlation with the apparent resistivity mean; secondly, when abnormity is unsaturated, there is a negative power function relationship between water content and apparent resistivity mean; thirdly, the volume of abnormity and apparent resistivity mean behave as a decreasing power function law.
基金supported by the National Natural Science Foundation of China under Grants No. 61671116 and No. 11905026Fundamental Research Funds for the Central Universities under Grants No. ZYGX2019Z006 and No. ZYGX2019J012。
文摘In this paper,an analytical model is used to analyze the modulated polar mesospheric winter echoes(PMWE).The winter parameters were introduced to simulate the effects of different parameters during the artificial electron heating of PMWE.The important role of the charged dust particle in the creation of PMWE is confirmed again.It is found that during the heating of PMWE,the increases of the dust size,dust charge,electron temperature,initial electron density,and ion-neutral collision frequency cause the increase of the electron density irregularity,and hence the PMWE strength.However,with increasing the dust density,the electron density irregularity and the PMWE strength decrease.
基金Supported by PetroChina Science and Technology Project(2021DJ0202).
文摘Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.
