Polycrystalline LaCrO3（LCO） thin films are deposited on Pt/Ti/SiO2/Si substrates by pulsed laser deposition and used as the switching material to construct resistive random access memory devices. The unipolar resist...Polycrystalline LaCrO3（LCO） thin films are deposited on Pt/Ti/SiO2/Si substrates by pulsed laser deposition and used as the switching material to construct resistive random access memory devices. The unipolar resistive switching（RS） behavior in the Au/LCO/Pt devices exhibits a high resistance ratio of ~104 between the high resistance state（HRS） and low resistance state（LRS） and exhibits excellent endurance/retention characteristics.The conduction mechanism of the HRS in the high voltage range is dominated by the Schottky emission, while the Ohmic conduction dictates the LRS and the low voltage range of HRS. The RS behavior in the Au/LCO/Pt devices can be understood by the formation and rupture of conducting filaments consisting of oxygen vacancies,which is validated by the temperature dependence of resistance and x-ray photoelectron spectroscopy results.Further analysis shows that the reset current IR and reset power PR in the reset processes exhibit a scaling law with the resistance in LRS（R0）, which indicates that the Joule heating effect plays an essential role in the RS behavior of the Au/LCO/Pt devices.展开更多
We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,5...We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,50,100,and 150 g kg-1dry wood fibers.Density of all treatments was kept constant at 0.67 g cm-3.The water-repellent property of organo-silane significantly reduced water absorption（WA） and thickness swelling but mechanical properties declined due to the reduced proportion of wood-fiber as organo-silane was added to the matrix：the compression ratio of MDF panels and the integrity among wood-fibers both declined,resulting in reduced mechanical properties.We recommend use of 50 g of NOS/kg wood-fiber to improve WA and thickness swelling while retaining acceptable mechanical properties.展开更多
The objective of this investigation was to introduce a cement-based composite of higher quality. For this purpose new hybrid nanocomposite from bagasse fiber,glass fiber and multi-wall carbon nanotubes（MWCNTs）were m...The objective of this investigation was to introduce a cement-based composite of higher quality. For this purpose new hybrid nanocomposite from bagasse fiber,glass fiber and multi-wall carbon nanotubes（MWCNTs）were manufactured. The physical and mechanical properties of the manufactured composites were measured according to standard methods. The properties of the manufactured hybrid nanocomposites were dramatically better than traditional composites. Also all the reinforced composites with carbon nanotube, glass fiber or bagasse fiber exhibited better properties rather than neat cement.The results indicated that bagasse fiber proved suitable for substitution of glass fiber as a reinforcing agent in the cement composites. The hybrid nanocomposite containing10 % glass fiber, 10 % bagasse fiber and 1.5 % MWCNTs was selected as the best compound.展开更多
Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability...Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.展开更多
In this work, we review the developing progress of two-dimensional terahertz time-domain spectroscopy（THz-TDS） and its diverse applications, including analyzing the polarization of THz radiation from a laser-induced...In this work, we review the developing progress of two-dimensional terahertz time-domain spectroscopy（THz-TDS） and its diverse applications, including analyzing the polarization of THz radiation from a laser-induced plasma source and studying the corresponding physical mechanism, and characterizing the optical properties of crystals, etc.展开更多
A discharge channel with a chamfered wall not only has application in the design of modern Hall thrusters, but also exists where the channel wall is eroded, and so is a common status for these units. In this paper, th...A discharge channel with a chamfered wall not only has application in the design of modern Hall thrusters, but also exists where the channel wall is eroded, and so is a common status for these units. In this paper, the laws and mechanisms that govern the effect of the chamfered wall on the performance of a Hall thruster are investigated. By applying both experimental measurement and particle-in-cell simulation, it is determined that there is a moderate chamfer angle that can further improve the optimal performance obtained with a straight channel. This is because the chamfering of the wall near the channel exit can enhance ion acceleration and effectively reduce ion recombination on the wall, which is favorable to the promotion of the thrust and efficiency. However, the chamfer angle should not be too large; otherwise, both the density of the propellant gas and the distribution of the plasma potential in the channel are influenced, which is undesirable for efficient propellant utilization and beam concentration. Therefore, it is suggested that the chamfer shape of the channel wall is an important factor that must be carefully considered in the design of Hall thrusters.展开更多
Comparing with hot researches in absorber layer,window layer has attracted less attention in PbS quantum dot solar cells(QD SCs). Actually, the window layer plays a key role in exciton separation, charge drifting, and...Comparing with hot researches in absorber layer,window layer has attracted less attention in PbS quantum dot solar cells(QD SCs). Actually, the window layer plays a key role in exciton separation, charge drifting, and so on.Herein, ZnO window layer was systematically investigated for its roles in QD SCs performance. The physical mechanism of improved performance was also explored. It was found that the optimized ZnO films with appropriate thickness and doping concentration can balance the optical and electrical properties, and its energy band align well with the absorber layer for efficient charge extraction. Further characterizations demonstrated that the window layer optimization can help to reduce the surface defects, improve the heterojunction quality, as well as extend the depletion width. Compared with the control devices, the optimized devices have obtained an efficiency of 6.7% with an enhanced V_(oc) of 18%, J_(sc) of 21%, FF of 10%, and power conversion efficiency of 58%. The present work suggests a useful strategy to improve the device performance by optimizing the window layer besides the absorber layer.展开更多
We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portla...We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portland cement mixed with different levels of inorganic additives. We determined the setting time and compression strength of cement pastes containing different additives and particles, and studied the effects of these additives and particles on thickness swelling, internal bond strength and modulus of rupture of CBPB by using RSM （Response Surface Methodology）. The mathematical model equations （second-order response functions） were derived to optimize properties of CBPB by computer simulation programming. Predicted values were in agreement with experimental values （R2 values of 0.93, 0.96 and 0.96 for TS, IB and MOR, respectively）. RSM can be efficiently applied to model panel properties. The variables can affect the properties of panels. The cement composites with bending strength 〉 12.5 MPa and internal bond strength 〉 0.28 MPa can be made by using wheat straw as a reinforcing material. Straw particle usage up to 11.5% in the mixture satisfies the minimum requirements of International Standard, EN 312 （2003） for IB and MOR. The dose of 4.95% calcium chloride, by weight of cement, can improve mechanical properties of the panels at the minimum requirement of EN 312. By increasing straw content from 0 to 30%, TS was reduced by increasing straw particle usage up to 1.5% and with 5.54% calcium chloride in the mixture, TS satisfied the EN 312 standard.展开更多
For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the forma...For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration （5%, 10%, 15%） and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive （UF-45, UF-91）. Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength.展开更多
We investigate how an initial thermo vacuum state, in the context of thermo field dynamics, evolves in a single-mode amplitude dissipative channel, and find that in this process the thermo squeezing effect decreases w...We investigate how an initial thermo vacuum state, in the context of thermo field dynamics, evolves in a single-mode amplitude dissipative channel, and find that in this process the thermo squeezing effect decreases while the fictitious-mode vacuum becomes chaotic.展开更多
Using the method presented recently [Phys.Rev.A 77（2008）014306; Phys.Lett.A 369（2007）377], the transformation operator （TO） is explicitly given for teleporting an arbitrary three-qubit state with a six-qubit cha...Using the method presented recently [Phys.Rev.A 77（2008）014306; Phys.Lett.A 369（2007）377], the transformation operator （TO） is explicitly given for teleporting an arbitrary three-qubit state with a six-qubit channel and Bell-state measurements. A criterion on whether such quantum teleportation can be perfectly realized is educed in terms of TO. Moreover, six instantiations on TO and criterion are concisely shown.展开更多
We study the spin-weighted spheroidal wave functions in the case of s = m = 0. Their eigenvalue problem is investigated by the perturbation method in supersymmetric quantum mechanics. In the first three terms of param...We study the spin-weighted spheroidal wave functions in the case of s = m = 0. Their eigenvalue problem is investigated by the perturbation method in supersymmetric quantum mechanics. In the first three terms of parameter a = a^2 w^2, the ground eigenvalue and eigenfunction are obtained. The obtained ground eigenfunction is elegantly in dosed forms. These results are new and very useful for the application of the spheroidal wave functions.展开更多
Metal-tip/Pr0.7Ca0.3MnO3/Pt devices possess two types of I-V hysteresis： clockwise vs counter clockwise depending on the tip materials. The criteria for categorization of these two types of devices can be simply base...Metal-tip/Pr0.7Ca0.3MnO3/Pt devices possess two types of I-V hysteresis： clockwise vs counter clockwise depending on the tip materials. The criteria for categorization of these two types of devices can be simply based on whether the Gibbs free energy of oxidation for the metal tip is lower or higher than that of PCMO, respectively. While the clockwise hysteresis can be attributed to electric field induced oxidation/reduction, the counter clockwise hysteresis can be explained by oxygen vacancy migration in an electrical field. Alternating-current conductance spectra also reveal distinct hopping barriers between these two categories of devices at high resistive states.展开更多
We establish a new model based on fractal theory and cubic spline interpolation to study the effective thermal conductivity of isotropic porous silica low-k materials. A 3D fractal model is introduced to describe the ...We establish a new model based on fractal theory and cubic spline interpolation to study the effective thermal conductivity of isotropic porous silica low-k materials. A 3D fractal model is introduced to describe the structure of the silica xerogel and silica hybrid materials （such as methylsilsesquioxane, MSQ）. Combined with fractal structure, a more suitable medium approximation is developed to study the isotropic porous silica xerogel and MSQ materials. Cubic spline interpolation for fitting discrete predictions from the fractal model is used to obtain the continuous function of the effective thermal conductivity versus porosity. Compared with other common models, the effective thermal conductivity predicted by our model presents better agreement with the experimental data for all porosity. These results indicate that the proposed model is valid.展开更多
We propose a scheme for the probabilistic teleportation of an unknown two-particle state of general formation in ion trap. It is shown that one can realize experimentally this teleportation protocol of two-particle st...We propose a scheme for the probabilistic teleportation of an unknown two-particle state of general formation in ion trap. It is shown that one can realize experimentally this teleportation protocol of two-particle state with presently available techniques.展开更多
The Schr？dinger equation with the Manning-Rosen potential is studied by working in a complete square integrable basis that carries a tridiagonal matrix representation of the wave operator. In this program, solving th...The Schr？dinger equation with the Manning-Rosen potential is studied by working in a complete square integrable basis that carries a tridiagonal matrix representation of the wave operator. In this program, solving the Schr？dinger equation is translated into finding solutions of the resulting three-term recursion relation for the expansion coefficients of the wavefunction. The discrete spectrum of the bound states is obtained by diagonalization of the recursion relation with special choice of the parameters and the wavefunctions is expressed in terms of the Jocobi polynomial.展开更多
We derive, with an invariant operator method and unitary transformation approach, that the Schr6dinger equation with a time-dependent linear potential possesses an infinite string of shape-preseving wave-packet state...We derive, with an invariant operator method and unitary transformation approach, that the Schr6dinger equation with a time-dependent linear potential possesses an infinite string of shape-preseving wave-packet states 1φ,λ （t） having classical motion. The qualitative properties of the invariant eigenvalue spectrum （discrete or continuous） are described separately for the different values of the frequency ω of a harmonic oscillator. It is also shown that, for a discrete eigenvalue spectrum, the states 1φ,λ （t） could be obtained from the coherent state 1φ,λ （t）.展开更多
Silica microspheres self-assembled in glass capillary are investigated. Monodisperse silica microsphere dispersions in diameter 320nm are self-organized into a bulk cylindrical colloidal crystal by evaporation induced...Silica microspheres self-assembled in glass capillary are investigated. Monodisperse silica microsphere dispersions in diameter 320nm are self-organized into a bulk cylindrical colloidal crystal by evaporation induced nucleation and crystallization. The resulting colloidal crystals are characterized by optical microscopy and scanning electronic microscopy （SEM）, and the SEM images show these crystals dominate in fcc lattice with its （111） crystallographic axis as longitudinal. The colloidal crystal filled capillary is packaged into a heat-shrink plastic tube and a fiber measurement system is designed to measure the optical property of colloidal bulk in capillary. It is found that an appreciable bandgap appears at wavelength 686 nm from the transmission spectroscopy, which is consistent with the theoretical estimation. A considerable photonic band gap of up to -10 dB and a steep photonic band edge of up to 0.25 dB/nm indicate that silica microspheres are promising for implementing optical filter applications in fiber systems.展开更多
Based on superconducting charge qubits （SCCQs） coupled to a single-mode microwave cavity, we propose a scheme for generating charge cluster states. For all SCCQs, the controlled gate voltages are all in their degene...Based on superconducting charge qubits （SCCQs） coupled to a single-mode microwave cavity, we propose a scheme for generating charge cluster states. For all SCCQs, the controlled gate voltages are all in their degeneracy points, the quantum information is encoded in two logic states of charge basis. The generation of the multi-qubit cluster state can be achieved step by step on a pair of nearest-neighbor qubits. Considering effective long-rang coupling, we provide an efficient way to one-step generating of a highly entangled cluster state, in which the qubit-qubit coupling is mediated by the cavity mode. Our quantum operations are insensitive to the initial state of the cavity mode by removing the influence of the cavity mode via the periodical evolution of the system. Thus, our operation may be against the decoherence from the cavity.展开更多
A form of statistical interaction term of one-dimensional anyons is introduced, based on which one-dimensional anyon models are theoretically realized, and the statistical transmutation between bosons （or fermions） ...A form of statistical interaction term of one-dimensional anyons is introduced, based on which one-dimensional anyon models are theoretically realized, and the statistical transmutation between bosons （or fermions） and anyons is established in quantum mechanics formalism. Two kinds of anyon models which are being studied are recovered and reexplained naturally in our formalism.展开更多
基金Supported by the Joint Funds of the National Natural Science Foundation of China and the Chinese Academy of Sciences’Large-Scale Scientific Facility under Grant No U1532149the National Basic Research Program of China under Grant No2014CB931704
文摘Polycrystalline LaCrO3（LCO） thin films are deposited on Pt/Ti/SiO2/Si substrates by pulsed laser deposition and used as the switching material to construct resistive random access memory devices. The unipolar resistive switching（RS） behavior in the Au/LCO/Pt devices exhibits a high resistance ratio of ~104 between the high resistance state（HRS） and low resistance state（LRS） and exhibits excellent endurance/retention characteristics.The conduction mechanism of the HRS in the high voltage range is dominated by the Schottky emission, while the Ohmic conduction dictates the LRS and the low voltage range of HRS. The RS behavior in the Au/LCO/Pt devices can be understood by the formation and rupture of conducting filaments consisting of oxygen vacancies,which is validated by the temperature dependence of resistance and x-ray photoelectron spectroscopy results.Further analysis shows that the reset current IR and reset power PR in the reset processes exhibit a scaling law with the resistance in LRS（R0）, which indicates that the Joule heating effect plays an essential role in the RS behavior of the Au/LCO/Pt devices.
基金conducted as a joint research projectfinanced by SRTTU(Iran)UPM(Malaysia)
文摘We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,50,100,and 150 g kg-1dry wood fibers.Density of all treatments was kept constant at 0.67 g cm-3.The water-repellent property of organo-silane significantly reduced water absorption（WA） and thickness swelling but mechanical properties declined due to the reduced proportion of wood-fiber as organo-silane was added to the matrix：the compression ratio of MDF panels and the integrity among wood-fibers both declined,resulting in reduced mechanical properties.We recommend use of 50 g of NOS/kg wood-fiber to improve WA and thickness swelling while retaining acceptable mechanical properties.
文摘The objective of this investigation was to introduce a cement-based composite of higher quality. For this purpose new hybrid nanocomposite from bagasse fiber,glass fiber and multi-wall carbon nanotubes（MWCNTs）were manufactured. The physical and mechanical properties of the manufactured composites were measured according to standard methods. The properties of the manufactured hybrid nanocomposites were dramatically better than traditional composites. Also all the reinforced composites with carbon nanotube, glass fiber or bagasse fiber exhibited better properties rather than neat cement.The results indicated that bagasse fiber proved suitable for substitution of glass fiber as a reinforcing agent in the cement composites. The hybrid nanocomposite containing10 % glass fiber, 10 % bagasse fiber and 1.5 % MWCNTs was selected as the best compound.
基金supported by the Sichuan Science and Technology Program (Grant Nos.2023NSFSC0004,2023NSFSC0790)the National Natural Science Foundation of China (Grant Nos.51827901,52304033)the Sichuan University Postdoctoral Fund (Grant No.2024SCU12093)。
文摘Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.
基金supported by the National Basic Research Program of China under Grant No.2014CB339802,No.2011CB808100the National Natural Science Foundation of China under Grant No.11174156
文摘In this work, we review the developing progress of two-dimensional terahertz time-domain spectroscopy（THz-TDS） and its diverse applications, including analyzing the polarization of THz radiation from a laser-induced plasma source and studying the corresponding physical mechanism, and characterizing the optical properties of crystals, etc.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51507040,51777045 and 51736003)the Fundamental Research Funds for the Central Universities,China(Grant No.HIT.NSRIF.2015079)the Research Program,China(Grant No.JSZL2016203C006)
文摘A discharge channel with a chamfered wall not only has application in the design of modern Hall thrusters, but also exists where the channel wall is eroded, and so is a common status for these units. In this paper, the laws and mechanisms that govern the effect of the chamfered wall on the performance of a Hall thruster are investigated. By applying both experimental measurement and particle-in-cell simulation, it is determined that there is a moderate chamfer angle that can further improve the optimal performance obtained with a straight channel. This is because the chamfering of the wall near the channel exit can enhance ion acceleration and effectively reduce ion recombination on the wall, which is favorable to the promotion of the thrust and efficiency. However, the chamfer angle should not be too large; otherwise, both the density of the propellant gas and the distribution of the plasma potential in the channel are influenced, which is undesirable for efficient propellant utilization and beam concentration. Therefore, it is suggested that the chamfer shape of the channel wall is an important factor that must be carefully considered in the design of Hall thrusters.
基金financially supported by the National Natural Science Foundation of China(61306137,51602114)the Research Fund for the Doctoral Program of Higher Education(20130142120075)+2 种基金the Fundamental Research Funds for the Central Universities(HUST:2016YXMS032)the Guangdong-Hong Kong joint innovation project(Grant No.2016A050503012)the Guangdong Natural Science Funds for Distinguished Young Scholars(Grant No.2015A030306044)
文摘Comparing with hot researches in absorber layer,window layer has attracted less attention in PbS quantum dot solar cells(QD SCs). Actually, the window layer plays a key role in exciton separation, charge drifting, and so on.Herein, ZnO window layer was systematically investigated for its roles in QD SCs performance. The physical mechanism of improved performance was also explored. It was found that the optimized ZnO films with appropriate thickness and doping concentration can balance the optical and electrical properties, and its energy band align well with the absorber layer for efficient charge extraction. Further characterizations demonstrated that the window layer optimization can help to reduce the surface defects, improve the heterojunction quality, as well as extend the depletion width. Compared with the control devices, the optimized devices have obtained an efficiency of 6.7% with an enhanced V_(oc) of 18%, J_(sc) of 21%, FF of 10%, and power conversion efficiency of 58%. The present work suggests a useful strategy to improve the device performance by optimizing the window layer besides the absorber layer.
基金supported by Department of Wood and Paper Science and Technology,University of Zabol
文摘We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portland cement mixed with different levels of inorganic additives. We determined the setting time and compression strength of cement pastes containing different additives and particles, and studied the effects of these additives and particles on thickness swelling, internal bond strength and modulus of rupture of CBPB by using RSM （Response Surface Methodology）. The mathematical model equations （second-order response functions） were derived to optimize properties of CBPB by computer simulation programming. Predicted values were in agreement with experimental values （R2 values of 0.93, 0.96 and 0.96 for TS, IB and MOR, respectively）. RSM can be efficiently applied to model panel properties. The variables can affect the properties of panels. The cement composites with bending strength 〉 12.5 MPa and internal bond strength 〉 0.28 MPa can be made by using wheat straw as a reinforcing material. Straw particle usage up to 11.5% in the mixture satisfies the minimum requirements of International Standard, EN 312 （2003） for IB and MOR. The dose of 4.95% calcium chloride, by weight of cement, can improve mechanical properties of the panels at the minimum requirement of EN 312. By increasing straw content from 0 to 30%, TS was reduced by increasing straw particle usage up to 1.5% and with 5.54% calcium chloride in the mixture, TS satisfied the EN 312 standard.
文摘For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration （5%, 10%, 15%） and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive （UF-45, UF-91）. Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength.
文摘We investigate how an initial thermo vacuum state, in the context of thermo field dynamics, evolves in a single-mode amplitude dissipative channel, and find that in this process the thermo squeezing effect decreases while the fictitious-mode vacuum becomes chaotic.
基金Supported by the New Century Excellent Talent Project （NCET） of the Ministry of Education of China under Grant No NCET-06-0554, the National Natural Science Foundation of China under Grant Nos 10975001, 60677001, 10747146 and 10874122, the Science-Technology Fund of Anhui Province for Outstanding Youth under Grant No 06042087, the Key Fund of the Ministry of Education of China under Grant No 206063, the General Fund of the Educational Committee of Anhui Province under Grant No 2006KJ260B, the Natural Science Foundation of Guangdong Province under Grant Nos 06300345 and 7007806, and the Talent Foundation of High Education of Anhui Province for Outstanding Youth under Grant No 2009SQRZ018.
文摘Using the method presented recently [Phys.Rev.A 77（2008）014306; Phys.Lett.A 369（2007）377], the transformation operator （TO） is explicitly given for teleporting an arbitrary three-qubit state with a six-qubit channel and Bell-state measurements. A criterion on whether such quantum teleportation can be perfectly realized is educed in terms of TO. Moreover, six instantiations on TO and criterion are concisely shown.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10875018 and 10773002.
文摘We study the spin-weighted spheroidal wave functions in the case of s = m = 0. Their eigenvalue problem is investigated by the perturbation method in supersymmetric quantum mechanics. In the first three terms of parameter a = a^2 w^2, the ground eigenvalue and eigenfunction are obtained. The obtained ground eigenfunction is elegantly in dosed forms. These results are new and very useful for the application of the spheroidal wave functions.
基金Supported by the Knowledge Innovation Project of Chinese Academy of Sciences under Grant No KJCX2-SW-W26, and the National Natural Science Foundation of China under Grant Nos 90406017 and 10427402.
文摘Metal-tip/Pr0.7Ca0.3MnO3/Pt devices possess two types of I-V hysteresis： clockwise vs counter clockwise depending on the tip materials. The criteria for categorization of these two types of devices can be simply based on whether the Gibbs free energy of oxidation for the metal tip is lower or higher than that of PCMO, respectively. While the clockwise hysteresis can be attributed to electric field induced oxidation/reduction, the counter clockwise hysteresis can be explained by oxygen vacancy migration in an electrical field. Alternating-current conductance spectra also reveal distinct hopping barriers between these two categories of devices at high resistive states.
基金Supported by the National Natural Science Foundation of China under Grant No 60476011.
文摘We establish a new model based on fractal theory and cubic spline interpolation to study the effective thermal conductivity of isotropic porous silica low-k materials. A 3D fractal model is introduced to describe the structure of the silica xerogel and silica hybrid materials （such as methylsilsesquioxane, MSQ）. Combined with fractal structure, a more suitable medium approximation is developed to study the isotropic porous silica xerogel and MSQ materials. Cubic spline interpolation for fitting discrete predictions from the fractal model is used to obtain the continuous function of the effective thermal conductivity versus porosity. Compared with other common models, the effective thermal conductivity predicted by our model presents better agreement with the experimental data for all porosity. These results indicate that the proposed model is valid.
基金Supported by the National Natural Science Foundation of China under Grant No 10971247, and the Hebei Natural Science Foundation of China under Grant No F2009000311.
文摘We propose a scheme for the probabilistic teleportation of an unknown two-particle state of general formation in ion trap. It is shown that one can realize experimentally this teleportation protocol of two-particle state with presently available techniques.
文摘The Schr？dinger equation with the Manning-Rosen potential is studied by working in a complete square integrable basis that carries a tridiagonal matrix representation of the wave operator. In this program, solving the Schr？dinger equation is translated into finding solutions of the resulting three-term recursion relation for the expansion coefficients of the wavefunction. The discrete spectrum of the bound states is obtained by diagonalization of the recursion relation with special choice of the parameters and the wavefunctions is expressed in terms of the Jocobi polynomial.
文摘We derive, with an invariant operator method and unitary transformation approach, that the Schr6dinger equation with a time-dependent linear potential possesses an infinite string of shape-preseving wave-packet states 1φ,λ （t） having classical motion. The qualitative properties of the invariant eigenvalue spectrum （discrete or continuous） are described separately for the different values of the frequency ω of a harmonic oscillator. It is also shown that, for a discrete eigenvalue spectrum, the states 1φ,λ （t） could be obtained from the coherent state 1φ,λ （t）.
文摘Silica microspheres self-assembled in glass capillary are investigated. Monodisperse silica microsphere dispersions in diameter 320nm are self-organized into a bulk cylindrical colloidal crystal by evaporation induced nucleation and crystallization. The resulting colloidal crystals are characterized by optical microscopy and scanning electronic microscopy （SEM）, and the SEM images show these crystals dominate in fcc lattice with its （111） crystallographic axis as longitudinal. The colloidal crystal filled capillary is packaged into a heat-shrink plastic tube and a fiber measurement system is designed to measure the optical property of colloidal bulk in capillary. It is found that an appreciable bandgap appears at wavelength 686 nm from the transmission spectroscopy, which is consistent with the theoretical estimation. A considerable photonic band gap of up to -10 dB and a steep photonic band edge of up to 0.25 dB/nm indicate that silica microspheres are promising for implementing optical filter applications in fiber systems.
基金Supported by the National Natural Science Foundation of China under Grant No 10574126, the Hunan Provincial Natural Science Foundation under Grant No 06jj50014 and Key Foundation of the Education Commission of Hunan Province under Grant No 06A055.
文摘Based on superconducting charge qubits （SCCQs） coupled to a single-mode microwave cavity, we propose a scheme for generating charge cluster states. For all SCCQs, the controlled gate voltages are all in their degeneracy points, the quantum information is encoded in two logic states of charge basis. The generation of the multi-qubit cluster state can be achieved step by step on a pair of nearest-neighbor qubits. Considering effective long-rang coupling, we provide an efficient way to one-step generating of a highly entangled cluster state, in which the qubit-qubit coupling is mediated by the cavity mode. Our quantum operations are insensitive to the initial state of the cavity mode by removing the influence of the cavity mode via the periodical evolution of the system. Thus, our operation may be against the decoherence from the cavity.
基金Supported by the National Natural Science Foundation of China under Grant No 10947138, and in part by the Research Foundation of Anhui Normal University under Grant No 2009xqn63.
文摘A form of statistical interaction term of one-dimensional anyons is introduced, based on which one-dimensional anyon models are theoretically realized, and the statistical transmutation between bosons （or fermions） and anyons is established in quantum mechanics formalism. Two kinds of anyon models which are being studied are recovered and reexplained naturally in our formalism.
