We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.T...We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.展开更多
Photovoltaic conversion was enhanced by directly assemble of a network of single-walled carbon nanotubes(SWNTs) onto the surface of n-p junction silicon solar cells. When the density of SWNTs increased from 50 to 400 ...Photovoltaic conversion was enhanced by directly assemble of a network of single-walled carbon nanotubes(SWNTs) onto the surface of n-p junction silicon solar cells. When the density of SWNTs increased from 50 to 400 tubes μm^(-2), an enhancement of 3.92% in energy conversion efficiency was typically obtained. The effect of the SWNTs network is proposed for trapping incident photons and assisting electronic transportation at the interface of silicon solar cells.展开更多
To meet the requirements of electronic vehicles(EVs) and hybrid electric vehicles(HEVs),the high energy density Li Ni_(0.8) Co_(0.15) Al_(0.05) O_2(NCA) cathode and Si–C anode have attracted more attention.Here we re...To meet the requirements of electronic vehicles(EVs) and hybrid electric vehicles(HEVs),the high energy density Li Ni_(0.8) Co_(0.15) Al_(0.05) O_2(NCA) cathode and Si–C anode have attracted more attention.Here we report the thermal behaviors of NCA/Si–C pouch cell during the charge/discharge processes at different current densities.The total heat generations are derived from the surface temperature change during electrochemical Li+insertion/extraction in adiabatic surrounding.The reversible heat is determined by the entropic coefficients,which are related with open-circuit voltage at different temperatures; while the irreversible heat is determined by the internal resistance,which can be obtained via V–I characteristic,electrochemical impedance spectroscopy and hybrid pulse power characterization(HPPC).During the electrochemical process,the reversible heat contributes less than 10% to total heat generation; and the heat generated in charge process is less than that in discharge process.The results of thermal behaviors analyses are conducive to understanding the safety management and paving the way for building a reliable thermal model of high energy density lithium ion battery.展开更多
With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the pr...With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.展开更多
All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structure...All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structures within the photoactive film,inefficient charge generation and carrier transport are observed which lead to inferior photovoltaic performance compared to smaller molecular acceptor-based photovoltaics.Here,by diluting PM6 with a cutting-edge polymeric acceptor PY-IT and diluting PY-IT with PM6 or D18,donor-dominating or acceptor-dominating heterojunctions were prepared.Synchrotron X-ray and multiple spectrometer techniques reveal that the diluted heterojunctions receive increased structural order,translating to enhanced carrier mobility,improved exciton diffusion length,and suppressed non-radiative recombination loss during the power conversion.As the results,the corresponding PM6+1%PY-IT/PY-IT+1%D18 and PM6+1%PY-IT/PY-IT+1%PM6 devices fabricated by layer-by-layer deposition received superior power conversion efficiency(PCE)of 19.4%and 18.8%respectively,along with enhanced operational lifetimes in air,outperforming the PCE of 17.5%in the PM6/PY-IT reference device.展开更多
Methods to remove dust deposits by high-speed airflow have significant potential applications,with optimal design of flow velocity being the core technology.In this paper,we discuss the wind speed required for particl...Methods to remove dust deposits by high-speed airflow have significant potential applications,with optimal design of flow velocity being the core technology.In this paper,we discuss the wind speed required for particle removal from photovoltaic(PV)panels by compressed air by analyzing the force exerted on the dust deposited on inclined photovoltaic panels,which also included different electrification mechanisms of dust while it is in contact with the PV panel.The results show that the effect of the particle charging mechanism in the electric field generated by the PV panel is greatly smaller than the effect of the Van der Waals force and gravity,but the effect of the particle charged by the contact electrification mechanism in the electrostatic field is very pronounced.The wind speed required for dust removal from the PV panel increases linearly with the PV panel electric field,so we suggest that the nighttime,when the PV electric field is relatively small,would be more appropriate time for dust removal.The above results are of great scientific importance for accurately grasping the dust distribution law and for achieving scientific removal of dust on PV panels.展开更多
Based on the transport equation of the semiconductor device model for 0.524 e V Ge Sn alloy and the experimental parameters of the material,the thermal-electricity conversion performance governed by a Ge Sn diode has ...Based on the transport equation of the semiconductor device model for 0.524 e V Ge Sn alloy and the experimental parameters of the material,the thermal-electricity conversion performance governed by a Ge Sn diode has been systematically studied in its normal and inverted structures.For the normal p^(+)/n(n^(+)/p)structure,it is demonstrated here that an optimal base doping N_(d(a))=3(7)×10^(18)cm^(-3) is observed,and the superior p^(+)/n structure can achieve a higher performance.To reduce material consumption,an economical active layer can comprise a 100 nm-300 nm emitter and a 3μm-6μm base to attain comparable performance to that for the optimal configuration.Our results offer many useful guidelines for the fabrication of economical Ge Sn thermophotovoltaic devices.展开更多
In recent years perovskite solar cells have attracted an increasing scientific and technological interest in the scientific community. It is important to know that the temperature is one of the factors which have a st...In recent years perovskite solar cells have attracted an increasing scientific and technological interest in the scientific community. It is important to know that the temperature is one of the factors which have a strong effect on the efficiency of perovskite solar cell. This study communicates a temperature analysis on the pho- tovoltaic parameters of CH3NH3Pbl3-based perovskite solar cell in a broad interval from 80 to 360 K. Strong temperature-dependent photovoltaic effects have been observed in the type of solar cell, which could be mainly attributed to CH3NH3PbI3, showing a ferroelectric-paraelectric phase transition at low temperature （T 〈 160 K）. An increase in temperature over the room temperature decreased the perovskite solar cell performance and reduced its efficiency from 16Z to 9%. The investigation with electronic impedance spectroscopy reveals that at low temperature （T 〈 120 K） the charge transport layer limits the device performance, while at high temperature （T 〉 200 K）, the interfacial charge recombination becomes the dominant factor.展开更多
Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shif...Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shift towards the utilization of solar energy.However,traditional solar energy solutions often require extensive spaces for a panel installation,limiting their practicality in a dense urban environment.To overcome the spatial constraint,researchers have developed transparent photovoltaics(TPV),enabling windows and facades in vehicles and buildings to generate electric energy.Current TPV advancements are focused on improving both transparency and power output to rival commercially available silicon solar panels.In this review,we first briefly introduce wavelength-and non-wavelengthselective strategies to achieve transparency.Figures of merit and theoretical limits of TPVs are discussed to comprehensively understand the status of current TPV technology.Then we highlight recent progress in different types of TPVs,with a particular focus on solution-processed thin-film photovoltaics(PVs),including colloidal quantum dot PVs,metal halide perovskite PVs and organic PVs.The applications of TPVs are also reviewed,with emphasis on agrivoltaics,smart windows and facades.Finally,current challenges and future opportunities in TPV research are pointed out.展开更多
Langkawi SkyCab has the highest energy demand in Langkawi Island and the demand keeps increasing year by year.This study proposed alternatives energy of a hybrid photovoltaic(PV)and fuel cell system for the SkyCab’s ...Langkawi SkyCab has the highest energy demand in Langkawi Island and the demand keeps increasing year by year.This study proposed alternatives energy of a hybrid photovoltaic(PV)and fuel cell system for the SkyCab’s operation.The best sizing and configurations were chosen based on Homer simulation software.A comparative study was done between a conventional system and other hybrid combinations.The results revealed that the proposed system had reduced the cost as well as CO2 emission almost by 39%and 79%,respectively.The hybrid PV and fuel cell system is aligned with the Malaysian government’s goals of reducing carbon emissions 40%by the year 2030.展开更多
The influence of an ultrathin 4-（dicyanomethylene）-2-t-butyl-6-（1,1,7,7-tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） fluorescent dye layer at donor/acceptor heterojunction on the performance of small-molecule o...The influence of an ultrathin 4-（dicyanomethylene）-2-t-butyl-6-（1,1,7,7-tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） fluorescent dye layer at donor/acceptor heterojunction on the performance of small-molecule organic photovoltaic （OPV） cell is studied. The structure of OPV cell is of indium-tin oxide （ITO）/copper phthalocyanine （CuPc）/DCJTB/fullerene （C60）/bathophenantbroline （Bphen）/Ag. The results show that open circuit voltage （Voc） increases to 0.57 V as the film thickness of DCJTB layer increases from 0.2 to 2.0 nm. By using an equivalent circuit model, the enhancement of VOC is found to be attributed to the reduced reverse saturation current density （Js） which is due to the lower highest occupied molecular orbital （HOMO） level in DCJTB than that in CuPc. Also, the short circuit current density （JSC） is affected when the DCJTB layer becomes thicker, resulting from the high series resistance RsA due to the low charge carrier mobility of fluorescent red dye.展开更多
In the process of fabrication of polymer photovoltaic （PV） devices, poly （3, 4-ethylenedioxythiophene）： poly（styrenesulfonate） （PEDOT：PSS） thin film, acting as an anode buffer layer, is spin-coated under the...In the process of fabrication of polymer photovoltaic （PV） devices, poly （3, 4-ethylenedioxythiophene）： poly（styrenesulfonate） （PEDOT：PSS） thin film, acting as an anode buffer layer, is spin-coated under the action of an electric field. The PV devices with a PEDOT：PSS layer spin-coated under the action of a static electric field exhibit improved short-circuit current density （Jsc） and power conversion efficiency （PCE）. The investigation of morphology shows that the appropriate intensity of the electric field can increase the roughness of the surface of the PEDOT：PSS layer, which results in improved contact between the anode and hole transport layer and thus enhances the Jsc of the devices. Chemical analysis is also provided by x-ray photoelectron spectroscopy （XPS） spectra.展开更多
The performance of an organic photovoltaic （OPV） cell based on copper phthatocyanine CuPc/C60 with a tris- （8-hydroxyquinolinato） aluminum （Alq3） buffer layer has been investigated. It was found that the power c...The performance of an organic photovoltaic （OPV） cell based on copper phthatocyanine CuPc/C60 with a tris- （8-hydroxyquinolinato） aluminum （Alq3） buffer layer has been investigated. It was found that the power conversion efficiency of the device was 1.51% under illumination with an intensity of 100 mW/cm^2, which was limited by a squareroot dependence of the photocurrent on voltage. The photocurrent optical power density characteristics showed that the OPV cell had a significant space-charge limited photocurrent with a varied saturation voltage and a three quarters power dependence on optical power density. Also, the absorption spectrum was measured by a spectrophotometer, and the results showed that the additional Alq3 layer has a minor effect on photocurrent generation.展开更多
Increasing the efficiency and proportion of photovoltaic power generation installations is one of the best ways to reduce both CO_(2) emissions and reliance on fossil-fuel-based power supplies.Solar energy is a clean ...Increasing the efficiency and proportion of photovoltaic power generation installations is one of the best ways to reduce both CO_(2) emissions and reliance on fossil-fuel-based power supplies.Solar energy is a clean and renewable power source with excellent potential for further development and utilization.In 2021,the global solar installed capacity was about 749.7 GW.Establishing correlations between solar power generation,standard coal equivalent,carbon sinks,and green sinks is crucial.However,there have been few reports about correlations between the efficiency of tracking solar photovoltaic panels and the above parameters.This paper calculates the increased power generation achievable through the use of tracking photovoltaic panels compared with traditional fixed panels and establishes relationships between power generation,standard coal equivalent,and carbon sinks,providing a basis for attempts to reduce reliance on carbon-based fuels.The calculations show that power generation efficiency can be improved by about 26.12%by enabling solar panels to track the sun's rays during the day and from season to season.Through the use of this improved technology,global CO_(2) emissions can be reduced by 183.63 Mt,and the standard coal equivalent can be reduced by 73.67 Mt yearly.Carbon capture is worth approximately EUR 15.48 billion,and carbon accounting analysis plays a vital role in carbon trading.展开更多
The methods and techniques commonly used in investigating the change of entropy and heat generation in Li cells/batteries are introduced, as are the measurements, calculations and purposes. The changes of entropy and ...The methods and techniques commonly used in investigating the change of entropy and heat generation in Li cells/batteries are introduced, as are the measurements, calculations and purposes. The changes of entropy and heat generation are concomitant with the use of Li ceUs/batteries. In order to improve the management and the application of Li cells/batteries, especially for large scale power batteries, the quantitative investigations of the change of entropy and heat generating are necessary.展开更多
Solar Design(https://solardesign.cn/)is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells,as well as emerging high-efficiency ...Solar Design(https://solardesign.cn/)is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells,as well as emerging high-efficiency solar cells such as organic,perovskite,and tandem cells.The platform offers user-updatable libraries of basic photovoltaic materials and devices,device-level multi-physics simulations involving optical–electrical–thermal interactions,and circuit-level compact model simulations based on detailed balance theory.Employing internationally advanced numerical methods,the platform accurately,rapidly,and efficiently solves optical absorption,electrical transport,and compact circuit models.It achieves multi-level photovoltaic simulation technology from“materials to devices to circuits”with fully independent intellectual property rights.Compared to commercial softwares,the platform achieves high accuracy and improves speed by more than an order of magnitude.Additionally,it can simulate unique electrical transport processes in emerging solar cells,such as quantum tunneling,exciton dissociation,and ion migration.展开更多
Inorganic solar cells, as durable photovoltaic devices for harvesting electric energy from sun light,have received tremendous attention due to the fear of exhausting the earth's energy resources and damaging the l...Inorganic solar cells, as durable photovoltaic devices for harvesting electric energy from sun light,have received tremendous attention due to the fear of exhausting the earth's energy resources and damaging the living environment due to greenhouse gases. Some recent developments in nanotechnology have opened up new avenues for more relevant inorganic solar cells produced by new photovoltaic conversion concepts and effective solar energy harvesting nanostructures. In this review, the multiple exciton generation effect solar cells, hot carrier solar cells, one dimensional material constructed asymmetrical schottky barrier arrays, noble nanoparticle induced plasmonic enhancement, and light trapping nanostructured semiconductor solar cells are highlighted.展开更多
Progresses in photovoltaic technologies over the past years are evident from the lower costs, the rising efficiency, to the great improvements in system reliability and yield. Cumulative installed power yearly growths...Progresses in photovoltaic technologies over the past years are evident from the lower costs, the rising efficiency, to the great improvements in system reliability and yield. Cumulative installed power yearly growths were on an average more than 40% in the period from 2007 to 2016 and in 2016, the global cumulative photovoltaic power installed has reached 320 GWp. The level 0.5 TWp could be reached before 2020. The production processes in the solar industry still have great potential for optimization both wafer based and thin film technologies. Trends following from the present technology levels are discussed, also taking into account other parts of photovoltaic systems that influence the cost of electrical energy produced. Present developments in the three generations of photovoltaic modules are discussed along with the criteria for the selection of appropriate photovoltaic module manufacturing technologies. The wafer based crystalline silicon(csilicon) technologies have the role of workhorse of present photovoltaic power generation, representing more than 90% of total module production. Further technology improvements have to be implemented without significantly increasing costs per unit, despite the necessarily more complex manufacturing processes involved. The tandem of c-silicon and thin film cells is very promising. Durability may be a limiting factor of this technology due to the dependence of the produced electricity cost on the module service time.展开更多
Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(...Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.展开更多
基金Project supported by NSC(98-2221-E-214-003-MY3 and ISU99-01-06)
文摘We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.
基金supported by National Natural Science Foundation of China(No.5073000830772434)+2 种基金National Basic Research Program of China(No.2006CB3004006)Shanghai Science and Technology Research Foundation(No:09JC1400740001052nm05500)
文摘Photovoltaic conversion was enhanced by directly assemble of a network of single-walled carbon nanotubes(SWNTs) onto the surface of n-p junction silicon solar cells. When the density of SWNTs increased from 50 to 400 tubes μm^(-2), an enhancement of 3.92% in energy conversion efficiency was typically obtained. The effect of the SWNTs network is proposed for trapping incident photons and assisting electronic transportation at the interface of silicon solar cells.
基金supported by the National Key R&D Program of China:Trackling Key Technology for Development and Industrialization of Power Lithium Ion Battery with High Specific Energy (Grant No.2016YFB0100508)
文摘To meet the requirements of electronic vehicles(EVs) and hybrid electric vehicles(HEVs),the high energy density Li Ni_(0.8) Co_(0.15) Al_(0.05) O_2(NCA) cathode and Si–C anode have attracted more attention.Here we report the thermal behaviors of NCA/Si–C pouch cell during the charge/discharge processes at different current densities.The total heat generations are derived from the surface temperature change during electrochemical Li+insertion/extraction in adiabatic surrounding.The reversible heat is determined by the entropic coefficients,which are related with open-circuit voltage at different temperatures; while the irreversible heat is determined by the internal resistance,which can be obtained via V–I characteristic,electrochemical impedance spectroscopy and hybrid pulse power characterization(HPPC).During the electrochemical process,the reversible heat contributes less than 10% to total heat generation; and the heat generated in charge process is less than that in discharge process.The results of thermal behaviors analyses are conducive to understanding the safety management and paving the way for building a reliable thermal model of high energy density lithium ion battery.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.2022ZYGXZR099)Pazhou Lab(No.PZL2022KF0010).
文摘With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.
基金supported by the Key Research and Development Program of Hubei Province(2023BAB116)the National Natural Science Foundation of China(52203238,52273196,52073221)the Fundamental Research Funds for the Central Universities of China(WUT:2021III016JC).
文摘All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structures within the photoactive film,inefficient charge generation and carrier transport are observed which lead to inferior photovoltaic performance compared to smaller molecular acceptor-based photovoltaics.Here,by diluting PM6 with a cutting-edge polymeric acceptor PY-IT and diluting PY-IT with PM6 or D18,donor-dominating or acceptor-dominating heterojunctions were prepared.Synchrotron X-ray and multiple spectrometer techniques reveal that the diluted heterojunctions receive increased structural order,translating to enhanced carrier mobility,improved exciton diffusion length,and suppressed non-radiative recombination loss during the power conversion.As the results,the corresponding PM6+1%PY-IT/PY-IT+1%D18 and PM6+1%PY-IT/PY-IT+1%PM6 devices fabricated by layer-by-layer deposition received superior power conversion efficiency(PCE)of 19.4%and 18.8%respectively,along with enhanced operational lifetimes in air,outperforming the PCE of 17.5%in the PM6/PY-IT reference device.
基金Project supported by the National Natural Science Foundation of China(Grant No.12064034)the Leading Talents Project of Science and Technology Innovation in Ningxia Hui Autonomous Region,China(Grant No.2020GKLRLX08)+1 种基金the Natural Science Foundation of Ningxia Hui Autonomous Region,China(Grant Nos.2022AAC03643 and2022AAC03117)the Major Science and Technology Project of Ningxia Hui Autonomous Region,China(Grant No.2022BDE03006)。
文摘Methods to remove dust deposits by high-speed airflow have significant potential applications,with optimal design of flow velocity being the core technology.In this paper,we discuss the wind speed required for particle removal from photovoltaic(PV)panels by compressed air by analyzing the force exerted on the dust deposited on inclined photovoltaic panels,which also included different electrification mechanisms of dust while it is in contact with the PV panel.The results show that the effect of the particle charging mechanism in the electric field generated by the PV panel is greatly smaller than the effect of the Van der Waals force and gravity,but the effect of the particle charged by the contact electrification mechanism in the electrostatic field is very pronounced.The wind speed required for dust removal from the PV panel increases linearly with the PV panel electric field,so we suggest that the nighttime,when the PV electric field is relatively small,would be more appropriate time for dust removal.The above results are of great scientific importance for accurately grasping the dust distribution law and for achieving scientific removal of dust on PV panels.
基金Project supported by the Beijing Natural Science Foundation Program,China(Grant No.4192016)。
文摘Based on the transport equation of the semiconductor device model for 0.524 e V Ge Sn alloy and the experimental parameters of the material,the thermal-electricity conversion performance governed by a Ge Sn diode has been systematically studied in its normal and inverted structures.For the normal p^(+)/n(n^(+)/p)structure,it is demonstrated here that an optimal base doping N_(d(a))=3(7)×10^(18)cm^(-3) is observed,and the superior p^(+)/n structure can achieve a higher performance.To reduce material consumption,an economical active layer can comprise a 100 nm-300 nm emitter and a 3μm-6μm base to attain comparable performance to that for the optimal configuration.Our results offer many useful guidelines for the fabrication of economical Ge Sn thermophotovoltaic devices.
基金supported by 973 Program of China (2014CB643506 and 2013CB922104)the NSFC (21173091 and 61205034)
文摘In recent years perovskite solar cells have attracted an increasing scientific and technological interest in the scientific community. It is important to know that the temperature is one of the factors which have a strong effect on the efficiency of perovskite solar cell. This study communicates a temperature analysis on the pho- tovoltaic parameters of CH3NH3Pbl3-based perovskite solar cell in a broad interval from 80 to 360 K. Strong temperature-dependent photovoltaic effects have been observed in the type of solar cell, which could be mainly attributed to CH3NH3PbI3, showing a ferroelectric-paraelectric phase transition at low temperature （T 〈 160 K）. An increase in temperature over the room temperature decreased the perovskite solar cell performance and reduced its efficiency from 16Z to 9%. The investigation with electronic impedance spectroscopy reveals that at low temperature （T 〈 120 K） the charge transport layer limits the device performance, while at high temperature （T 〉 200 K）, the interfacial charge recombination becomes the dominant factor.
基金supported by the National Natural Science Foundation of China(Grant number W2432035)financial support from the EPSRC SWIMS(EP/V039717/1)+3 种基金Royal Society(RGS\R1\221009 and IEC\NSFC\211201)Leverhulme Trust(RPG-2022-263)Ser Cymru programme–Enhancing Competitiveness Equipment Awards 2022-23(MA/VG/2715/22-PN66)the financial support from Kingdom of Saudi Arabia Ministry of Higher Education.
文摘Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shift towards the utilization of solar energy.However,traditional solar energy solutions often require extensive spaces for a panel installation,limiting their practicality in a dense urban environment.To overcome the spatial constraint,researchers have developed transparent photovoltaics(TPV),enabling windows and facades in vehicles and buildings to generate electric energy.Current TPV advancements are focused on improving both transparency and power output to rival commercially available silicon solar panels.In this review,we first briefly introduce wavelength-and non-wavelengthselective strategies to achieve transparency.Figures of merit and theoretical limits of TPVs are discussed to comprehensively understand the status of current TPV technology.Then we highlight recent progress in different types of TPVs,with a particular focus on solution-processed thin-film photovoltaics(PVs),including colloidal quantum dot PVs,metal halide perovskite PVs and organic PVs.The applications of TPVs are also reviewed,with emphasis on agrivoltaics,smart windows and facades.Finally,current challenges and future opportunities in TPV research are pointed out.
基金supported by the Research University Grant(GUP-Tier 1) under Vote No.19H40
文摘Langkawi SkyCab has the highest energy demand in Langkawi Island and the demand keeps increasing year by year.This study proposed alternatives energy of a hybrid photovoltaic(PV)and fuel cell system for the SkyCab’s operation.The best sizing and configurations were chosen based on Homer simulation software.A comparative study was done between a conventional system and other hybrid combinations.The results revealed that the proposed system had reduced the cost as well as CO2 emission almost by 39%and 79%,respectively.The hybrid PV and fuel cell system is aligned with the Malaysian government’s goals of reducing carbon emissions 40%by the year 2030.
基金Project partially supported by the National Natural Science Foundation of China(NNSFC)(Grant Nos.60736005 and 60425101-1)the Foundation for Innovative Research Groups of the NNSFC(Grant No.60721001)+3 种基金the Research Fund for the Dectoral Program of Higher Education(RFDP)(Grant No.20090185110020)the Program for New Century Excellent Talents in University,China(Grant No.NCET-06-0812)the Scientific Research Foundation for Returned Overseas Chinese Scholars,State Education Ministry(Grant No.GGRYJJ08-05)the Young Excellence Project of Sichuan Province,China(Grant No.09ZQ026-074)
文摘The influence of an ultrathin 4-（dicyanomethylene）-2-t-butyl-6-（1,1,7,7-tetramethyljulolidyl-9-enyl）-4H-pyran （DCJTB） fluorescent dye layer at donor/acceptor heterojunction on the performance of small-molecule organic photovoltaic （OPV） cell is studied. The structure of OPV cell is of indium-tin oxide （ITO）/copper phthalocyanine （CuPc）/DCJTB/fullerene （C60）/bathophenantbroline （Bphen）/Ag. The results show that open circuit voltage （Voc） increases to 0.57 V as the film thickness of DCJTB layer increases from 0.2 to 2.0 nm. By using an equivalent circuit model, the enhancement of VOC is found to be attributed to the reduced reverse saturation current density （Js） which is due to the lower highest occupied molecular orbital （HOMO） level in DCJTB than that in CuPc. Also, the short circuit current density （JSC） is affected when the DCJTB layer becomes thicker, resulting from the high series resistance RsA due to the low charge carrier mobility of fluorescent red dye.
基金Project supported by the New-Century Training Program Foundation for Talents of the Natural Science (Grant No. NCET-08-0717)the National Natural Science Foundation of China (Grant Nos. 60777026,60677007 and 60825407)the Program of Introducing Talents of Discipline to Universities (Grant No. B08002)
文摘In the process of fabrication of polymer photovoltaic （PV） devices, poly （3, 4-ethylenedioxythiophene）： poly（styrenesulfonate） （PEDOT：PSS） thin film, acting as an anode buffer layer, is spin-coated under the action of an electric field. The PV devices with a PEDOT：PSS layer spin-coated under the action of a static electric field exhibit improved short-circuit current density （Jsc） and power conversion efficiency （PCE）. The investigation of morphology shows that the appropriate intensity of the electric field can increase the roughness of the surface of the PEDOT：PSS layer, which results in improved contact between the anode and hole transport layer and thus enhances the Jsc of the devices. Chemical analysis is also provided by x-ray photoelectron spectroscopy （XPS） spectra.
基金Project supported by the National Natural Science Foundation of China (NSFC) (Grant Nos. 60736005 and 60425101-1)the Foundation for Innovative Research Groups of the NSFC (Grant No. 60721001),Provincial Project (Grant No. 9140A02060609DZ0208)+1 种基金Program for New Century Excellent Talents in University (Grant No. NCET-06-0812),SRF for ROCS,SEM (Grant No. GGRYJJ08-05)Young Excellent Project of Sichuan Province (Grant No. 09ZQ026-074)
文摘The performance of an organic photovoltaic （OPV） cell based on copper phthatocyanine CuPc/C60 with a tris- （8-hydroxyquinolinato） aluminum （Alq3） buffer layer has been investigated. It was found that the power conversion efficiency of the device was 1.51% under illumination with an intensity of 100 mW/cm^2, which was limited by a squareroot dependence of the photocurrent on voltage. The photocurrent optical power density characteristics showed that the OPV cell had a significant space-charge limited photocurrent with a varied saturation voltage and a three quarters power dependence on optical power density. Also, the absorption spectrum was measured by a spectrophotometer, and the results showed that the additional Alq3 layer has a minor effect on photocurrent generation.
文摘Increasing the efficiency and proportion of photovoltaic power generation installations is one of the best ways to reduce both CO_(2) emissions and reliance on fossil-fuel-based power supplies.Solar energy is a clean and renewable power source with excellent potential for further development and utilization.In 2021,the global solar installed capacity was about 749.7 GW.Establishing correlations between solar power generation,standard coal equivalent,carbon sinks,and green sinks is crucial.However,there have been few reports about correlations between the efficiency of tracking solar photovoltaic panels and the above parameters.This paper calculates the increased power generation achievable through the use of tracking photovoltaic panels compared with traditional fixed panels and establishes relationships between power generation,standard coal equivalent,and carbon sinks,providing a basis for attempts to reduce reliance on carbon-based fuels.The calculations show that power generation efficiency can be improved by about 26.12%by enabling solar panels to track the sun's rays during the day and from season to season.Through the use of this improved technology,global CO_(2) emissions can be reduced by 183.63 Mt,and the standard coal equivalent can be reduced by 73.67 Mt yearly.Carbon capture is worth approximately EUR 15.48 billion,and carbon accounting analysis plays a vital role in carbon trading.
文摘The methods and techniques commonly used in investigating the change of entropy and heat generation in Li cells/batteries are introduced, as are the measurements, calculations and purposes. The changes of entropy and heat generation are concomitant with the use of Li ceUs/batteries. In order to improve the management and the application of Li cells/batteries, especially for large scale power batteries, the quantitative investigations of the change of entropy and heat generating are necessary.
基金Project supported by the Scientific Research Project of China Three Gorges Corporation(Grant No.202203092)。
文摘Solar Design(https://solardesign.cn/)is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells,as well as emerging high-efficiency solar cells such as organic,perovskite,and tandem cells.The platform offers user-updatable libraries of basic photovoltaic materials and devices,device-level multi-physics simulations involving optical–electrical–thermal interactions,and circuit-level compact model simulations based on detailed balance theory.Employing internationally advanced numerical methods,the platform accurately,rapidly,and efficiently solves optical absorption,electrical transport,and compact circuit models.It achieves multi-level photovoltaic simulation technology from“materials to devices to circuits”with fully independent intellectual property rights.Compared to commercial softwares,the platform achieves high accuracy and improves speed by more than an order of magnitude.Additionally,it can simulate unique electrical transport processes in emerging solar cells,such as quantum tunneling,exciton dissociation,and ion migration.
基金financial support from National High-Tech R & D Program of China (863, No. 2011AA050504)Natural Science Foundation of shanghai (No. 10ZR1416300), Shanghai Pujiang Program (No. 11PJD011)+2 种基金the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learningthe Foundation for SMC Excellent Young Teacher, "PCSIRT"the Analytical and Testing Center in Shanghai Jiaotong University
文摘Inorganic solar cells, as durable photovoltaic devices for harvesting electric energy from sun light,have received tremendous attention due to the fear of exhausting the earth's energy resources and damaging the living environment due to greenhouse gases. Some recent developments in nanotechnology have opened up new avenues for more relevant inorganic solar cells produced by new photovoltaic conversion concepts and effective solar energy harvesting nanostructures. In this review, the multiple exciton generation effect solar cells, hot carrier solar cells, one dimensional material constructed asymmetrical schottky barrier arrays, noble nanoparticle induced plasmonic enhancement, and light trapping nanostructured semiconductor solar cells are highlighted.
文摘Progresses in photovoltaic technologies over the past years are evident from the lower costs, the rising efficiency, to the great improvements in system reliability and yield. Cumulative installed power yearly growths were on an average more than 40% in the period from 2007 to 2016 and in 2016, the global cumulative photovoltaic power installed has reached 320 GWp. The level 0.5 TWp could be reached before 2020. The production processes in the solar industry still have great potential for optimization both wafer based and thin film technologies. Trends following from the present technology levels are discussed, also taking into account other parts of photovoltaic systems that influence the cost of electrical energy produced. Present developments in the three generations of photovoltaic modules are discussed along with the criteria for the selection of appropriate photovoltaic module manufacturing technologies. The wafer based crystalline silicon(csilicon) technologies have the role of workhorse of present photovoltaic power generation, representing more than 90% of total module production. Further technology improvements have to be implemented without significantly increasing costs per unit, despite the necessarily more complex manufacturing processes involved. The tandem of c-silicon and thin film cells is very promising. Durability may be a limiting factor of this technology due to the dependence of the produced electricity cost on the module service time.
基金supported by the National Key R&D Program of China (2019YFC1804102)the National Natural Science Foundation of China (32171615)。
文摘Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.
