Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsu...Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsulation,slow release and skin impermeability,and provided an excellent nanolipid slow-release encapsulation system for sunscreens.As observed by transmission electron microscopy,the nanolipid carriers were spherical shape,with smooth surface and uniform distribution,and the particle sizes were mainly concentrated in the range of 230 to 250 nm without agglomeration.The nanolipid carriers significantly improved the sunscreen performance through the synergistic effect of scattering and chemical absorption,and showed better UV stability than traditional sunscreen,indicating their photoprotective function.In vitro release experiments showed that the nano-lipidic carriers exhibited better release control when loaded with octyl methoxycinnamate(OMC)and butylmethoxydibenzoylmethane(BDFM)sunscreens than traditional traditional emulsions,with the cumulative release rate of OMC in the nano-lipidic carriers decreasing by 17.17% to 30.24% within 12 hours,and that of BDFM decreasing by 26.67% to 44.67%.26.67% to 44.16%.The results of the in vitro permeation experiment further confirmed that the nanolipid carriers could effectively encapsulate the sunscreens and prevent them from penetrating the skin barrier,thus reducing the skin irritation.Compared with traditional traditional emulsion,the cumulative penetration of OMC in nanostructured lipid carriers was 2.24μg/cm^(2)in 4 hours,while the cumulative penetration was reduced by 68.05%.The cumulative penetration of BDFM in the nanostructured lipid carrier was 3.24μg/cm^(2),with a 64.04%reduction in cumulative penetration.展开更多
CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and...CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and high operation temperatures.However,the density decay because of sintering and poor direct solar absorption of white CaO based heat carriers are the two main obstacles lying on the way to the realistic applications.This work introduced dark Mn-based inert support into calcium heat carriers,attempting to solve the above problems simultaneously.As an inert support,the finely dispersed Ca_(2)MnO_(4) functioned as the metal framework to resist CaCO_(3)/CaO sintering.Consequently,the cyclic stability of CaO-based heat carriers,resulting in the high energy storage densities of~2000 kJ/kg even over 20 cycles.As a dark material,Ca_(2)MnO_(4) successfully darkened CaO-based heat carriers,thereby greatly enhanced the direct solar absorption.In addition,the granulation of CaO-based heat carriers was also studied.The pellets showed satisfactory attrition resistance with only 9.85 wt% mass loss over 3200 cycles.In general,good physicochemical performance of Mn-doped CaO-based heat carrier endows it with great prospects for solar energy storage.展开更多
In order to understand the influence of bow shape on ice resistance and provide guidelines for hull line design in the early design stage,an investigation of the impact of bow shape on ice resistance for the Arctic LN...In order to understand the influence of bow shape on ice resistance and provide guidelines for hull line design in the early design stage,an investigation of the impact of bow shape on ice resistance for the Arctic LNG carriers is carried out based on semi-empirical methods.Firstly,some typical semi-empirical formulas developed for ice resistance estimation of cargo carriers in different ice conditions are summarized.Then,formulas appropriate for ice resistance estimation of Arctic LNG carriers under different ice conditions are verified according to the result comparison between semi-empirical formulas and experimental tests.The comparison result indicates that the Lindqvist formula is appropriate for ice resistance estimation in level ice conditions,Zuev and Dobrodeev formula for ice resistance estimation in broken ice conditions,and Dobrodeev formula for ice resistance estimation in brash ice conditions.After that,the parameters considered in the selected formulas are summarized,and the influence of critical parameters on ice resistance is analyzed.Some parameters describing the ship's bow shape characteristic like ship breadth,waterline angle and stem angle greatly influence the ice resistance.Ice resistance increases with both the growth of ship breadth under all ice conditions and the growth of stem angle in level ice and broken ice conditions while ice resistance decreases with the development of waterline angle under all ice conditions.Finally,the optimization of the bow shape is discussed,and an optimized bow shape with both a large waterline angle and low stem angle is proposed.The optimized bow shape can decrease ice resistance by 9.9%in the level ice condition and reduce ice resistance by 11.3%in the brash ice condition.展开更多
Safe and efficient sortie scheduling on the confined flight deck is crucial for maintaining high combat effectiveness of the aircraft carrier.The primary difficulty exactly lies in the spatiotemporal coordination,i.e....Safe and efficient sortie scheduling on the confined flight deck is crucial for maintaining high combat effectiveness of the aircraft carrier.The primary difficulty exactly lies in the spatiotemporal coordination,i.e.,allocation of limited supporting resources and collision-avoidance between heterogeneous dispatch entities.In this paper,the problem is investigated in the perspective of hybrid flow-shop scheduling problem by synthesizing the precedence,space and resource constraints.Specifically,eight processing procedures are abstracted,where tractors,preparing spots,catapults,and launching are virtualized as machines.By analyzing the constraints in sortie scheduling,a mixed-integer planning model is constructed.In particular,the constraint on preparing spot occupancy is improved to further enhance the sortie efficiency.The basic trajectory library for each dispatch entity is generated and a delayed strategy is integrated to address the collision-avoidance issue.To efficiently solve the formulated HFSP,which is essentially a combinatorial problem with tightly coupled constraints,a chaos-initialized genetic algorithm is developed.The solution framework is validated by the simulation environment referring to the Fort-class carrier,exhibiting higher sortie efficiency when compared to existing strategies.And animation of the simulation results is available at www.bilibili.com/video/BV14t421A7Tt/.The study presents a promising supporting technique for autonomous flight deck operation in the foreseeable future,and can be easily extended to other supporting scenarios,e.g.,ammunition delivery and aircraft maintenance.展开更多
The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs b...The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs based on M-EMLs separated by polyethyleneimine ethoxylated(PEIE)layer with different stacking sequences of blue(B),green(G),and red(R)QDs layer were used to intuitively explore the injection,transportation and recombination processes of the charge carriers in QLEDs by using the time-resolved electroluminescence(TrEL)spectra.From the TrEL spectra mea-surements,green and red emissions were obtained first in the QLEDs with the EMLs sequences of G/PEIE/B/PEIE/R and B/PEIE/R/PEIE/G along the direction of light emission,respectively.While the QLEDs adopt EMLs sequences of B/PEIE/G/PEIE/R,the blue,green and red emissions were obtained nearly at the same time.The above phenomenon can be attributed to different charge carrier transmission and radiation recombination process in the EMLs due to different valence band offsets and conduction band offsets between R-,G-and B-QDs by using different sequences of EMLs.White emission with coordi-nates of(0.31,0.31)and correlated color temperature(CCT)of 5916 K was obtained in the QLEDs with the EMLs se-quences of B/PEIE/G/PEIE/R,which can be attributed to the relative uniform emission of B-,G-and R-QDs due to the effec-tive injection and radiation recombination of charge carriers in each of the EMLs.The above results have great significance for further understanding and improving the performance of QLEDs with M-EMLs.展开更多
Recovery is a crucial supporting process for carrier aircraft,where a reasonable landing scheduling is expected to guide the fleet landing safely and quickly.Currently,there is little research on this topic,and most o...Recovery is a crucial supporting process for carrier aircraft,where a reasonable landing scheduling is expected to guide the fleet landing safely and quickly.Currently,there is little research on this topic,and most of it neglects potential influence factors,leaving the corresponding supporting efficiency questionable.In this paper,we study the landing scheduling problem for carrier aircraft considering the effects of bolting and aerial refueling.Based on the analysis of recovery mode involving the above factors,two types of primary constraints(i.e.,fuel constraint and wake interval constraint)are first described.Then,taking the landing sequencing as decision variables,a combinatorial optimization model with a compound objective function is formulated.Aiming at an efficient solution,an improved firefly algorithm is designed by integrating multiple evolutionary operators.In addition,a dynamic replanning mechanism is introduced to deal with special situations(i.e.,the occurrence of bolting and fuel shortage),where the high efficiency of the designed algorithm facilitates the online scheduling adjustment within seconds.Finally,numerical simulations with sufficient and insufficient fuel cases are both carried out,highlighting the necessity to consider bolting and aerial refueling during the planning procedure.Simulation results reveal that a higher bolting probability,as well as extra aerial refueling operations caused by fuel shortage,will lead to longer recovery complete time.Meanwhile,due to the strong optimum-seeking capability and solution efficiency of the improved algorithm,adaptive scheduling can be generated within milliseconds to deal with special situations,significantly improving the safety and efficiency of the recovery process.An animation is accessible at bilibili.com/video/BV1QprKY2EwD.展开更多
As battlefield scale enlarges,cross-platform collaborative combat provides an appealing paradigm for modern warfare.Complicated constraints and vast solution space pose great challenge for reasonable and efficient mis...As battlefield scale enlarges,cross-platform collaborative combat provides an appealing paradigm for modern warfare.Complicated constraints and vast solution space pose great challenge for reasonable and efficient mission planning,where path planning and target assignment are tightly coupled.In this paper,we focus on UAV mission planning under carrier delivery mode(e.g.,by aircraft carrier,ground vehicle,or transport aircraft) and design a three-layer hierarchical solution framework.In the first layer,we simultaneously determine delivery points and target set division by clustering.To address the safety concerns of radar risk and UAV endurance,an improved density peak clustering algorithm is developed by constraint fusio n.In the second layer,mission planning within each cluster is viewed as a coope rative multiple-task assignment problem.A hybrid heuristic algorithm that integrates a voting-based heuristic solution generation strategy(VHSG) and a stochastic variable neighborhood search(SVNS),called VHSG-SVNS,is proposed for rapid solution.Based on the results of the first two layers,the third layer transforms carrier path planning into a multiple-vehicle routing problem with time window.The cost between any two nodes is calculated by the A~* algorithm,and the genetic algorithm is then implemented to determine the global route.Finally,a practical mission scenario containing 200 targets is used to validate the effectiveness of the designed framework,where three layers cooperate well with each other to generate satisfactory combat scheduling.Comparisons are made in each layer to highlight optimum-seeking capability and efficiency of the proposed algorithms.Works done in this paper provide a simple but efficient solution framework for cross-platform cooperative mission planning problems,and can be potentially extended to other applications such as post-disaster search and rescue,forest surveillance and firefighting,logistics pick and delivery,etc.展开更多
There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresse...There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.展开更多
Bone tumour is one of most common primary cancer which exhibits cancerous osteoblastic differentiation and malignant osteoid in patients.At present,chemotherapy(pre-and post-operative)is used as a standard treatment p...Bone tumour is one of most common primary cancer which exhibits cancerous osteoblastic differentiation and malignant osteoid in patients.At present,chemotherapy(pre-and post-operative)is used as a standard treatment protocol for bone tumour.However,drugs used in the treatment of bone tumour induce high toxicity to normal tissues including anaemia,neutropenia,thrombocytopenia,and heart damage which further reduce the survival rate of patients.Therefore,there is an urgent need to develop a new therapeutic approach for the treatment such that it induce maximum cell killing effect in tumor cells while sparing the healthy bone cells.In this article,some new perspectives were provided on the development of bone-targeted nano-drug carriers for bone cancer treatment.We hope such discussions wouldencourage more detailed and careful studies to support product development of bone-targeted drug carriers for bone cancer treatment.展开更多
The influence of oxygen vacancy-dominated carrier mobility on the performance of memristors has attractedconsiderable attention.The device’s carrier mobility can be significantly improved by forming a nano-multilayer...The influence of oxygen vacancy-dominated carrier mobility on the performance of memristors has attractedconsiderable attention.The device’s carrier mobility can be significantly improved by forming a nano-multilayeredheterostructure when the individual layer thickness is below a critical value.In this work,Pt/[ZrO_(2):Y_(2)O_(3)(YSZ)/SrTiO_(3)(STO)]n/Nb:SrTiO_(3)(NSTO)memristive devices were configurated through laser pulse deposited YSZ/STO nanomultilayeredactive layer with both Pt and NSTO acting as top and counter electrodes.Specifically,the Pt/[YSZ/STO]5/NSTO device with five consecutive layers of YSZ/STO thin film shows superior memristor performance,and itscorresponding carrier mobility presents a significantly enhanced value compared to that of other periodic numbers ofYSZ/STO composed memristive devices.This can be attributed to the increase of oxygen vacancy concentration in thedevice,as evidenced by both experimental results and theoretical analysis.This work provides a significant approach inimproving the performance of memristor dominated by oxygen vacancy transporting mechanism.展开更多
Limited charge carrier lifetime(τ)leads to the short charge carrier diffusion length(L_(D))and thus impedes the improvement of power conversion efficiencies(PCEs)of organic solar cells(OSCs).Herein,anthracene(AN)as t...Limited charge carrier lifetime(τ)leads to the short charge carrier diffusion length(L_(D))and thus impedes the improvement of power conversion efficiencies(PCEs)of organic solar cells(OSCs).Herein,anthracene(AN)as the additive is introduced into classical donor:acceptor pairs to increase theτ.Introducing AN efficiently enhances the crystallinity of the PM 6:BTP-eC 9+blend film to reduce the trap density and increase theτto 1.484μs,achieving the prolonged L_(D).The prolonged L_(D) enables the PM 6:BTP-eC 9+blend film to gain weaker charge carrier recombination,reduced leakage current,and shorter charge carrier extraction time in devices,compared with PM 6:BTP-eC 9 counterparts.Therefore,PM 6:BTP-eC 9+based OSCs achieve higher PCEs of 18.41%±0.16%than PM 6:BTP-eC 9 based ones(17.08%±0.11%).Moreover,the PM 6:L 8-BO+based OSC presents an impressive PCE of 19.14%.It demonstrates that introducing AN is an efficient method to increase theτfor prolonged L_(D),boosting PCEs of OSCs.展开更多
Methoxy poly(ethylene glycol)-poly(D,L-lactide) block copolymers (PEG-PLA) were prepared through ring-opening polymerization.The oil in water suspension method was used to prepare block copolymer micelles. The critica...Methoxy poly(ethylene glycol)-poly(D,L-lactide) block copolymers (PEG-PLA) were prepared through ring-opening polymerization.The oil in water suspension method was used to prepare block copolymer micelles. The critical micelle concentration (CMC) by fluorescence spectroscopy was 0.0056 mg·ml -1 . The physical state of the inner core region of micelles was characterized with 1HNMR. The size of indomethacin (IMC) loaded micelles measured by dynamic light scattering (DLS) showed narrow monodisperse size distribution and the average diameters were less than 50 nm. In addition, the nanoparticles with relatively high drug loading content (DLC) were obtained.展开更多
文摘Nanolipid carriers and traditional emulsion containing chemical sunscreens were prepared using emulsification combined with ultrasonic technology.The nanolipid carriers showed superior performance in sunscreen encapsulation,slow release and skin impermeability,and provided an excellent nanolipid slow-release encapsulation system for sunscreens.As observed by transmission electron microscopy,the nanolipid carriers were spherical shape,with smooth surface and uniform distribution,and the particle sizes were mainly concentrated in the range of 230 to 250 nm without agglomeration.The nanolipid carriers significantly improved the sunscreen performance through the synergistic effect of scattering and chemical absorption,and showed better UV stability than traditional sunscreen,indicating their photoprotective function.In vitro release experiments showed that the nano-lipidic carriers exhibited better release control when loaded with octyl methoxycinnamate(OMC)and butylmethoxydibenzoylmethane(BDFM)sunscreens than traditional traditional emulsions,with the cumulative release rate of OMC in the nano-lipidic carriers decreasing by 17.17% to 30.24% within 12 hours,and that of BDFM decreasing by 26.67% to 44.67%.26.67% to 44.16%.The results of the in vitro permeation experiment further confirmed that the nanolipid carriers could effectively encapsulate the sunscreens and prevent them from penetrating the skin barrier,thus reducing the skin irritation.Compared with traditional traditional emulsion,the cumulative penetration of OMC in nanostructured lipid carriers was 2.24μg/cm^(2)in 4 hours,while the cumulative penetration was reduced by 68.05%.The cumulative penetration of BDFM in the nanostructured lipid carrier was 3.24μg/cm^(2),with a 64.04%reduction in cumulative penetration.
基金Project(2024BAB094)supported by the Key Research and Development Program of Hubei Province,ChinaProject(2024040801020296)supported by the Natural Science Foundation of Wuhan City,ChinaProject(52276113)supported by the National Natural Science Foundation of China。
文摘CaO-based heat carriers have shown great prospects for thermochemical energy storage in concentrated solar power systems due to the features such as rich reserves,environmental safety,high energy storage densities and high operation temperatures.However,the density decay because of sintering and poor direct solar absorption of white CaO based heat carriers are the two main obstacles lying on the way to the realistic applications.This work introduced dark Mn-based inert support into calcium heat carriers,attempting to solve the above problems simultaneously.As an inert support,the finely dispersed Ca_(2)MnO_(4) functioned as the metal framework to resist CaCO_(3)/CaO sintering.Consequently,the cyclic stability of CaO-based heat carriers,resulting in the high energy storage densities of~2000 kJ/kg even over 20 cycles.As a dark material,Ca_(2)MnO_(4) successfully darkened CaO-based heat carriers,thereby greatly enhanced the direct solar absorption.In addition,the granulation of CaO-based heat carriers was also studied.The pellets showed satisfactory attrition resistance with only 9.85 wt% mass loss over 3200 cycles.In general,good physicochemical performance of Mn-doped CaO-based heat carrier endows it with great prospects for solar energy storage.
文摘In order to understand the influence of bow shape on ice resistance and provide guidelines for hull line design in the early design stage,an investigation of the impact of bow shape on ice resistance for the Arctic LNG carriers is carried out based on semi-empirical methods.Firstly,some typical semi-empirical formulas developed for ice resistance estimation of cargo carriers in different ice conditions are summarized.Then,formulas appropriate for ice resistance estimation of Arctic LNG carriers under different ice conditions are verified according to the result comparison between semi-empirical formulas and experimental tests.The comparison result indicates that the Lindqvist formula is appropriate for ice resistance estimation in level ice conditions,Zuev and Dobrodeev formula for ice resistance estimation in broken ice conditions,and Dobrodeev formula for ice resistance estimation in brash ice conditions.After that,the parameters considered in the selected formulas are summarized,and the influence of critical parameters on ice resistance is analyzed.Some parameters describing the ship's bow shape characteristic like ship breadth,waterline angle and stem angle greatly influence the ice resistance.Ice resistance increases with both the growth of ship breadth under all ice conditions and the growth of stem angle in level ice and broken ice conditions while ice resistance decreases with the development of waterline angle under all ice conditions.Finally,the optimization of the bow shape is discussed,and an optimized bow shape with both a large waterline angle and low stem angle is proposed.The optimized bow shape can decrease ice resistance by 9.9%in the level ice condition and reduce ice resistance by 11.3%in the brash ice condition.
基金the financial support of the National Key Research and Development Plan(2021YFB3302501)the financial support of the National Natural Science Foundation of China(12102077)。
文摘Safe and efficient sortie scheduling on the confined flight deck is crucial for maintaining high combat effectiveness of the aircraft carrier.The primary difficulty exactly lies in the spatiotemporal coordination,i.e.,allocation of limited supporting resources and collision-avoidance between heterogeneous dispatch entities.In this paper,the problem is investigated in the perspective of hybrid flow-shop scheduling problem by synthesizing the precedence,space and resource constraints.Specifically,eight processing procedures are abstracted,where tractors,preparing spots,catapults,and launching are virtualized as machines.By analyzing the constraints in sortie scheduling,a mixed-integer planning model is constructed.In particular,the constraint on preparing spot occupancy is improved to further enhance the sortie efficiency.The basic trajectory library for each dispatch entity is generated and a delayed strategy is integrated to address the collision-avoidance issue.To efficiently solve the formulated HFSP,which is essentially a combinatorial problem with tightly coupled constraints,a chaos-initialized genetic algorithm is developed.The solution framework is validated by the simulation environment referring to the Fort-class carrier,exhibiting higher sortie efficiency when compared to existing strategies.And animation of the simulation results is available at www.bilibili.com/video/BV14t421A7Tt/.The study presents a promising supporting technique for autonomous flight deck operation in the foreseeable future,and can be easily extended to other supporting scenarios,e.g.,ammunition delivery and aircraft maintenance.
文摘The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs based on M-EMLs separated by polyethyleneimine ethoxylated(PEIE)layer with different stacking sequences of blue(B),green(G),and red(R)QDs layer were used to intuitively explore the injection,transportation and recombination processes of the charge carriers in QLEDs by using the time-resolved electroluminescence(TrEL)spectra.From the TrEL spectra mea-surements,green and red emissions were obtained first in the QLEDs with the EMLs sequences of G/PEIE/B/PEIE/R and B/PEIE/R/PEIE/G along the direction of light emission,respectively.While the QLEDs adopt EMLs sequences of B/PEIE/G/PEIE/R,the blue,green and red emissions were obtained nearly at the same time.The above phenomenon can be attributed to different charge carrier transmission and radiation recombination process in the EMLs due to different valence band offsets and conduction band offsets between R-,G-and B-QDs by using different sequences of EMLs.White emission with coordi-nates of(0.31,0.31)and correlated color temperature(CCT)of 5916 K was obtained in the QLEDs with the EMLs se-quences of B/PEIE/G/PEIE/R,which can be attributed to the relative uniform emission of B-,G-and R-QDs due to the effec-tive injection and radiation recombination of charge carriers in each of the EMLs.The above results have great significance for further understanding and improving the performance of QLEDs with M-EMLs.
基金the financial support of the National Natural Science Foundation of China(12102077,12161076)the Natural Science and Technology Program of Liaoning Province(2023-BS-061).
文摘Recovery is a crucial supporting process for carrier aircraft,where a reasonable landing scheduling is expected to guide the fleet landing safely and quickly.Currently,there is little research on this topic,and most of it neglects potential influence factors,leaving the corresponding supporting efficiency questionable.In this paper,we study the landing scheduling problem for carrier aircraft considering the effects of bolting and aerial refueling.Based on the analysis of recovery mode involving the above factors,two types of primary constraints(i.e.,fuel constraint and wake interval constraint)are first described.Then,taking the landing sequencing as decision variables,a combinatorial optimization model with a compound objective function is formulated.Aiming at an efficient solution,an improved firefly algorithm is designed by integrating multiple evolutionary operators.In addition,a dynamic replanning mechanism is introduced to deal with special situations(i.e.,the occurrence of bolting and fuel shortage),where the high efficiency of the designed algorithm facilitates the online scheduling adjustment within seconds.Finally,numerical simulations with sufficient and insufficient fuel cases are both carried out,highlighting the necessity to consider bolting and aerial refueling during the planning procedure.Simulation results reveal that a higher bolting probability,as well as extra aerial refueling operations caused by fuel shortage,will lead to longer recovery complete time.Meanwhile,due to the strong optimum-seeking capability and solution efficiency of the improved algorithm,adaptive scheduling can be generated within milliseconds to deal with special situations,significantly improving the safety and efficiency of the recovery process.An animation is accessible at bilibili.com/video/BV1QprKY2EwD.
文摘As battlefield scale enlarges,cross-platform collaborative combat provides an appealing paradigm for modern warfare.Complicated constraints and vast solution space pose great challenge for reasonable and efficient mission planning,where path planning and target assignment are tightly coupled.In this paper,we focus on UAV mission planning under carrier delivery mode(e.g.,by aircraft carrier,ground vehicle,or transport aircraft) and design a three-layer hierarchical solution framework.In the first layer,we simultaneously determine delivery points and target set division by clustering.To address the safety concerns of radar risk and UAV endurance,an improved density peak clustering algorithm is developed by constraint fusio n.In the second layer,mission planning within each cluster is viewed as a coope rative multiple-task assignment problem.A hybrid heuristic algorithm that integrates a voting-based heuristic solution generation strategy(VHSG) and a stochastic variable neighborhood search(SVNS),called VHSG-SVNS,is proposed for rapid solution.Based on the results of the first two layers,the third layer transforms carrier path planning into a multiple-vehicle routing problem with time window.The cost between any two nodes is calculated by the A~* algorithm,and the genetic algorithm is then implemented to determine the global route.Finally,a practical mission scenario containing 200 targets is used to validate the effectiveness of the designed framework,where three layers cooperate well with each other to generate satisfactory combat scheduling.Comparisons are made in each layer to highlight optimum-seeking capability and efficiency of the proposed algorithms.Works done in this paper provide a simple but efficient solution framework for cross-platform cooperative mission planning problems,and can be potentially extended to other applications such as post-disaster search and rescue,forest surveillance and firefighting,logistics pick and delivery,etc.
文摘There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.
基金The project supported by National Natural Science Foundation of China(81300964)the China Postdoctoral Science Foundation(2013M531611,2014T70648)
文摘Bone tumour is one of most common primary cancer which exhibits cancerous osteoblastic differentiation and malignant osteoid in patients.At present,chemotherapy(pre-and post-operative)is used as a standard treatment protocol for bone tumour.However,drugs used in the treatment of bone tumour induce high toxicity to normal tissues including anaemia,neutropenia,thrombocytopenia,and heart damage which further reduce the survival rate of patients.Therefore,there is an urgent need to develop a new therapeutic approach for the treatment such that it induce maximum cell killing effect in tumor cells while sparing the healthy bone cells.In this article,some new perspectives were provided on the development of bone-targeted nano-drug carriers for bone cancer treatment.We hope such discussions wouldencourage more detailed and careful studies to support product development of bone-targeted drug carriers for bone cancer treatment.
基金Projects(2023JJ30690,2022JJ30722)supported by the Natural Science Foundation of Hunan Province,ChinaProject(kq2202093)supported by the Natural Science Foundation of Changsha,ChinaProject(SKL202202SIC)supported by the Opening Project of State Key Laboratory of High Performance Ceramics and Superfine Microstructure,China。
文摘The influence of oxygen vacancy-dominated carrier mobility on the performance of memristors has attractedconsiderable attention.The device’s carrier mobility can be significantly improved by forming a nano-multilayeredheterostructure when the individual layer thickness is below a critical value.In this work,Pt/[ZrO_(2):Y_(2)O_(3)(YSZ)/SrTiO_(3)(STO)]n/Nb:SrTiO_(3)(NSTO)memristive devices were configurated through laser pulse deposited YSZ/STO nanomultilayeredactive layer with both Pt and NSTO acting as top and counter electrodes.Specifically,the Pt/[YSZ/STO]5/NSTO device with five consecutive layers of YSZ/STO thin film shows superior memristor performance,and itscorresponding carrier mobility presents a significantly enhanced value compared to that of other periodic numbers ofYSZ/STO composed memristive devices.This can be attributed to the increase of oxygen vacancy concentration in thedevice,as evidenced by both experimental results and theoretical analysis.This work provides a significant approach inimproving the performance of memristor dominated by oxygen vacancy transporting mechanism.
基金Projects(52272056,52372056,52232003)supported by the National Natural Science Foundation of ChinaProject(2023RC3044)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘Limited charge carrier lifetime(τ)leads to the short charge carrier diffusion length(L_(D))and thus impedes the improvement of power conversion efficiencies(PCEs)of organic solar cells(OSCs).Herein,anthracene(AN)as the additive is introduced into classical donor:acceptor pairs to increase theτ.Introducing AN efficiently enhances the crystallinity of the PM 6:BTP-eC 9+blend film to reduce the trap density and increase theτto 1.484μs,achieving the prolonged L_(D).The prolonged L_(D) enables the PM 6:BTP-eC 9+blend film to gain weaker charge carrier recombination,reduced leakage current,and shorter charge carrier extraction time in devices,compared with PM 6:BTP-eC 9 counterparts.Therefore,PM 6:BTP-eC 9+based OSCs achieve higher PCEs of 18.41%±0.16%than PM 6:BTP-eC 9 based ones(17.08%±0.11%).Moreover,the PM 6:L 8-BO+based OSC presents an impressive PCE of 19.14%.It demonstrates that introducing AN is an efficient method to increase theτfor prolonged L_(D),boosting PCEs of OSCs.
文摘Methoxy poly(ethylene glycol)-poly(D,L-lactide) block copolymers (PEG-PLA) were prepared through ring-opening polymerization.The oil in water suspension method was used to prepare block copolymer micelles. The critical micelle concentration (CMC) by fluorescence spectroscopy was 0.0056 mg·ml -1 . The physical state of the inner core region of micelles was characterized with 1HNMR. The size of indomethacin (IMC) loaded micelles measured by dynamic light scattering (DLS) showed narrow monodisperse size distribution and the average diameters were less than 50 nm. In addition, the nanoparticles with relatively high drug loading content (DLC) were obtained.
