Decentralized robust stabilization problem of discrete-time fuzzy large-scale systems with parametric uncertainties is considered. This uncertain fuzzy large-scale system consists of N interconnected T-S fuzzy subsyst...Decentralized robust stabilization problem of discrete-time fuzzy large-scale systems with parametric uncertainties is considered. This uncertain fuzzy large-scale system consists of N interconnected T-S fuzzy subsystems, and the parametric uncertainties are unknown but norm-bounded. Based on Lyapunov stability theory and decentralized control theory of large-scale system, the design schema of decentralized parallel distributed compensation （DPDC） fuzzy controllers to ensure the asymptotic stability of the whole fuzzy large-scale system is proposed. The existence conditions for these controllers take the forms of LMIs. Finally a numerical simulation example is given to show the utility of the method proposed.展开更多
A robust decentralized H∞ control problem for uncertain multi-channel systems is considered. The uncertainties are assumed to be time-invariant, norm-bounded, and exist in both the system and control input matrices. ...A robust decentralized H∞ control problem for uncertain multi-channel systems is considered. The uncertainties are assumed to be time-invariant, norm-bounded, and exist in both the system and control input matrices. The dynamic output feedback is mainly dealt with. A necessary and sufficient condition for the uncertain multi-channel system to be stabilized robustly with a specified disturbance attenuation level is derived based on the bounded real lemma, which is reduced to a feasibility problem of a nonlinear matrix inequality （NMI）. A two-stage homotopy method is used to solve the NMI iteratively. First, a decentralized controller for the nominal system with no uncertainty is computed by imposing structural constraints on the coefficient matrices of the controller gradually. Then the decentralized controller is modified, again gradually, to cope with the uncertainties. On each stage, a variable is fixed alternately at the iterations to reduce the NMI to a linear matrix inequality （LMI）. A given example shows the efficiency of this method.展开更多
The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone t...The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone to uncertainties such as model parameter variations and disturbances. Robust optimal tracking controller design for this kind of precision stages with mass and damping ratio uncertainties was researched. The mass and damping ratio uncertainties were modeled as the structured parametric uncertainty model. An identification method for obtaining the parametric uncertainties was developed by using unbiased least square technique. The instantaneous frequency bandwidth of the external disturbance signals was analyzed by using short time Fourier transform technique. A two loop tracking control strategy that combines the p-synthesis and the disturbance observer （DOB） techniques was proposed. The p-synthesis technique was used to design robust optimal controllers based on structured uncertainty models. By complementing the/z controller, the DOB was applied to further improving the disturbance rejection performance. To evaluate the positioning performance of the proposed control strategy, the comparative experiments were conducted on a prototype micro milling machine among four control schemes： the proposed two-loop tracking control, the single loop μ control, the PID control and the PID with DOB control. The disturbance rejection performances, the root mean square （RMS） tracking errors and the performance robustness of different control schemes were studied. The results reveal that the proposed control scheme has the best positioning performance. It reduces the maximal errors caused by disturbance forces such as friction force by 60% and the RMS errors by 63.4% compared with the PID control. Compared to PID with DOB control, it reduces the RMS errors by 29.6%.展开更多
Stability of a class of nonlinear systems with parametric uncertainty is dealt with. This kind of systems can be viewed as feedback interconnection systems. By constructing the Lyapunov function for one of the feedbac...Stability of a class of nonlinear systems with parametric uncertainty is dealt with. This kind of systems can be viewed as feedback interconnection systems. By constructing the Lyapunov function for one of the feedback interconnection systems, the Lyapunov function for this kind of systems is obtained. Sufficient conditions of global asymptotic stability for this class of systems are deduced. The simulation shows the effectiveness of the method.展开更多
Reasons and realities such as being non-linear of dynamical equations,being lightweight and unstable nature of quadrotor,along with internal and external disturbances and parametric uncertainties,have caused that the ...Reasons and realities such as being non-linear of dynamical equations,being lightweight and unstable nature of quadrotor,along with internal and external disturbances and parametric uncertainties,have caused that the controller design for these quadrotors is considered the challenging issue of the day.In this work,an adaptive sliding mode controller based on neural network is proposed to control the altitude of a quadrotor.The error and error derivative of the altitude of a quadrotor are the inputs of neural network and altitude sliding surface variable is its output.Neural network estimates the sliding surface variable adaptively according to the conditions of quadrotor and sets the altitude of a quadrotor equal to the desired value.The proposed controller stability has been proven by Lyapunov theory and it is shown that all system states reach to sliding surface and are remaining in it.The superiority of the proposed control method has been proven by comparison and simulation results.展开更多
An adaptive actuator failure compensation control scheme is developed using an indirect adaptive control method,by calculating the controller parameters from adaptive estimates of system parameters and actuator failur...An adaptive actuator failure compensation control scheme is developed using an indirect adaptive control method,by calculating the controller parameters from adaptive estimates of system parameters and actuator failure parameters.A key technical issue is how to deal with the actuator failure uncertainties such as failure pattern,time and values.A complete parametrization covering all possible failures is used to solve this issue for adaptive parameter estimation.A simultaneous mapping from the estimated system/failure parameters to the controller parameters is employed to make the control system capable of ensuring the desired system performance under failures,which is verified by simulation results.展开更多
基金This project was supported by NSFC Project (60474047), (60334010) and GuangDong Province Natural Science Foundationof China(31406)and China Postdoctoral Science Foundation (20060390725).
文摘Decentralized robust stabilization problem of discrete-time fuzzy large-scale systems with parametric uncertainties is considered. This uncertain fuzzy large-scale system consists of N interconnected T-S fuzzy subsystems, and the parametric uncertainties are unknown but norm-bounded. Based on Lyapunov stability theory and decentralized control theory of large-scale system, the design schema of decentralized parallel distributed compensation （DPDC） fuzzy controllers to ensure the asymptotic stability of the whole fuzzy large-scale system is proposed. The existence conditions for these controllers take the forms of LMIs. Finally a numerical simulation example is given to show the utility of the method proposed.
基金This project was supported in part by the National Natural Science Foundation of China (60634020)in part by the Postdoctoral Science Foundation of China(20060390883)in part by Specialized Research Fund for the Doctoral Program of Higher Education(20050533028).
文摘A robust decentralized H∞ control problem for uncertain multi-channel systems is considered. The uncertainties are assumed to be time-invariant, norm-bounded, and exist in both the system and control input matrices. The dynamic output feedback is mainly dealt with. A necessary and sufficient condition for the uncertain multi-channel system to be stabilized robustly with a specified disturbance attenuation level is derived based on the bounded real lemma, which is reduced to a feasibility problem of a nonlinear matrix inequality （NMI）. A two-stage homotopy method is used to solve the NMI iteratively. First, a decentralized controller for the nominal system with no uncertainty is computed by imposing structural constraints on the coefficient matrices of the controller gradually. Then the decentralized controller is modified, again gradually, to cope with the uncertainties. On each stage, a variable is fixed alternately at the iterations to reduce the NMI to a linear matrix inequality （LMI）. A given example shows the efficiency of this method.
基金Project(50875257) supported by the National Natural Science Foundation of China
文摘The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone to uncertainties such as model parameter variations and disturbances. Robust optimal tracking controller design for this kind of precision stages with mass and damping ratio uncertainties was researched. The mass and damping ratio uncertainties were modeled as the structured parametric uncertainty model. An identification method for obtaining the parametric uncertainties was developed by using unbiased least square technique. The instantaneous frequency bandwidth of the external disturbance signals was analyzed by using short time Fourier transform technique. A two loop tracking control strategy that combines the p-synthesis and the disturbance observer （DOB） techniques was proposed. The p-synthesis technique was used to design robust optimal controllers based on structured uncertainty models. By complementing the/z controller, the DOB was applied to further improving the disturbance rejection performance. To evaluate the positioning performance of the proposed control strategy, the comparative experiments were conducted on a prototype micro milling machine among four control schemes： the proposed two-loop tracking control, the single loop μ control, the PID control and the PID with DOB control. The disturbance rejection performances, the root mean square （RMS） tracking errors and the performance robustness of different control schemes were studied. The results reveal that the proposed control scheme has the best positioning performance. It reduces the maximal errors caused by disturbance forces such as friction force by 60% and the RMS errors by 63.4% compared with the PID control. Compared to PID with DOB control, it reduces the RMS errors by 29.6%.
基金supported by the National Natural Science Foundation of China (60774011)the Natural Science Foundation of Zhejiang Province (Y105141)
文摘Stability of a class of nonlinear systems with parametric uncertainty is dealt with. This kind of systems can be viewed as feedback interconnection systems. By constructing the Lyapunov function for one of the feedback interconnection systems, the Lyapunov function for this kind of systems is obtained. Sufficient conditions of global asymptotic stability for this class of systems are deduced. The simulation shows the effectiveness of the method.
基金authorities of East Tehran Branch,Islamic Azad University,Tehran,Iran,for providing support and necessary facilities
文摘Reasons and realities such as being non-linear of dynamical equations,being lightweight and unstable nature of quadrotor,along with internal and external disturbances and parametric uncertainties,have caused that the controller design for these quadrotors is considered the challenging issue of the day.In this work,an adaptive sliding mode controller based on neural network is proposed to control the altitude of a quadrotor.The error and error derivative of the altitude of a quadrotor are the inputs of neural network and altitude sliding surface variable is its output.Neural network estimates the sliding surface variable adaptively according to the conditions of quadrotor and sets the altitude of a quadrotor equal to the desired value.The proposed controller stability has been proven by Lyapunov theory and it is shown that all system states reach to sliding surface and are remaining in it.The superiority of the proposed control method has been proven by comparison and simulation results.
基金supported by the US National Science Foundation (ECS0601475)the National Natural Science Foundation of China (60904042)
文摘An adaptive actuator failure compensation control scheme is developed using an indirect adaptive control method,by calculating the controller parameters from adaptive estimates of system parameters and actuator failure parameters.A key technical issue is how to deal with the actuator failure uncertainties such as failure pattern,time and values.A complete parametrization covering all possible failures is used to solve this issue for adaptive parameter estimation.A simultaneous mapping from the estimated system/failure parameters to the controller parameters is employed to make the control system capable of ensuring the desired system performance under failures,which is verified by simulation results.
