With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage techno...With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.展开更多
Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applicatio...Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.展开更多
High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality c...High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.展开更多
The rice Dongfu 159 was used for the potting experiment to simulate soil cadmium(Cd)stress,and four silicon preparations,Si-50-G and Si-60-G at a concentration of 0.20%and Si-T-G and Si-E-G at a concentration of 0.50%...The rice Dongfu 159 was used for the potting experiment to simulate soil cadmium(Cd)stress,and four silicon preparations,Si-50-G and Si-60-G at a concentration of 0.20%and Si-T-G and Si-E-G at a concentration of 0.50%,were applied at the tillering stage and booting stage of rice,respectively.The cadmium content,root vitality,root malondialdehyde(MDA)content,and antioxidant enzyme activity of each part of rice plants were determined,in order to provide a theoretical reference for exploring the mechanism of silicon fertilizer on the mitigation of Cd-stressed plants.The results showed that under the condition of cadmium stress,silicon application could significantly increase the root vitality and antioxidant enzyme activity,reduce the content of MDA,and reduce the accumulation of cadmium in various parts of rice.The treatment of Si-T-G applied at the tillering stage was the most effective in increasing the root vitality of rice,which was significantly increased by 63.00%compared with the CK.The treatment of Si-50-G applied at the stage of booting was the most effective in reducing MDA content of rice roots,which was significantly reduced by 30.16%compared with the CK.The treatment of Si-60-G applied at the stage of booting was the most effective in increasing the root superoxide dismutase(SOD)activity,which was significantly increased by 39.36%compared with the CK.The treatment of Si-60-G applied at the tillering stage was the most effective in increasing the root peroxidase(POD)and catalase(CAT)activities,which were significantly increased by 64.66%and 51.52%,respectively,compared with the CK.The treatment of Si-T-G applied at the tillering stage was the most effective in reducing Cd content of rice roots,stems and grains,which were significantly reduced by 39.53%,61.19%and 43.41%,respectively,compared with the CK,and the treatment of Si-60-G was the most effective in reducing Cd content of leaves,which was significantly reduced by 53.40%compared with the CK.展开更多
The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fab...The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fabricated a 1D C_(60) polymer crystal via on-site annealing of a millimeter-sized C_(60) molecular crystal withα-Li_(3)N at 500°C and ambient pres�sure.Characterizations show that the C_(60) cages in the crystal have been efficiently connected,forming 1D chains along the<110>direction in an orthorhombic 3D structure.At the same time,the crystal maintains a morphology similar to that of the pristine C_(60)crystal,providing opportunities for characterization of all the facets of the crystal via Raman spectroscopy and thus suggesting the formation mechanism of such crystals.展开更多
Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpa...Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpassing 100% in the last five years. Thereby, deposits with low levels of gold content, gold with complex associations or in a very fine particle size became exploitable again, allowing new projects and expansion of existing ones. However, for maximum process efficiency is indispensable a deep knowledge of the characteristics of these minerals and their behavior in face of beneficiation processes. Consequently, an accurate routine for mineralogical and technological characterization is essential.展开更多
Hyaluronic acid （HA） had been prepared from pigskin residues with neutral proteinase. The preparing results and conditions were studied. After extracting and purification, HA was detected through ultraviolet spectra...Hyaluronic acid （HA） had been prepared from pigskin residues with neutral proteinase. The preparing results and conditions were studied. After extracting and purification, HA was detected through ultraviolet spectra and infraction spectrum, and its content and purity were tested by carbazole and Elason-Morgan, respectively. This results indicated that significant quantities of HA could be prepared in fresh pigskin with biologic enzyme, and the pure HA was cosmetic grade and food grade.展开更多
A modified wet chemical route for low-temperature synthesis of the calcium stannate CaSnO3, a potentialmaterial for dielectric applications is reported. Firstly, a precursor CaSn(OH)6 was prepared using tin tetrachlor...A modified wet chemical route for low-temperature synthesis of the calcium stannate CaSnO3, a potentialmaterial for dielectric applications is reported. Firstly, a precursor CaSn(OH)6 was prepared using tin tetrachloride,calcium chloride and sodium hydroxide at room temperature. Then the precursor was annealed at relatively low tem-perature of 600 ℃ to obtain CaSnO3. The phase identification, thermal behavior and surface morphology of the sam-ples were characterized by element analysis, X-ray diffraction (XRD), thermo-gravimetric (TG) analysis and deriva-tive thermo-gravimetric (DTG) analysis, Fourier transform infrared spectroscopy (FTIR) and scanning electron mi-croscopy (SEM) in detail. The results show that CaSnO3 obtained by this method possesses a cubic perovskitestructure with average grain size of 5 μm.展开更多
To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences...To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences of polypropylene (PP) fiber on the mechanical properties and volume stability were investigated. The results show that compressive strength of the geopolymer containing 33.3%(mass fraction) fly ash by steam curing at 80 ℃ for 6 d is improved by 35.5%. The 3-day compressive strength, flexural strength and impacting energy of geopolymers containing 0.05%PP fiber increase by 67.8%, 36.1% and 6.25%, while the shrinkage and modulus of compressibility decrease by 38.6% and 31.3%, respectively. The results of scanning electron microscopy (SEM) and the appearances of crack growths confirm that PP fiber can offer a bridging effect over the harmful pores and defects and change the expanding ways of cracks, resulting in a great improvement of strength and toughness.展开更多
Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of poly...Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of polyurethane(PU)based on glycidyl azide polymer(GAP) and hydroxyl-terminated polybutadiene(HTPB) as an energetic and inert polymeric binder respectively.Casting technique was used for the preparation of different PBX formulations based on FOX-7/RDX and PU(GAP/HTPB)with 14% binder.The sensitivity to different initial impulses and performance characteristics of the explosive and lethal zone of the tested controlled fragmentation warhead by the fragmentation warhead assessment test(arena test)were studied,in which the arena test was carried out with a controlled fragmentation warhead made from Ck45 steel,with dimensions(100 mm length,30 mm outer diameter and 3 mm thickness).Results show that PBXGF4 has lower sensitivity to impact and heat than those of PBXGR4 by 188.4% and 3.2% respectively.Its friction sensitivity is the same as that of PBXGR4.It has better performance,in which detonation velocity increases by 2.1% and brisance increases by 0.5% when compared with those of PBXGR4.It was concluded that PBXGF4 which based on FOX-7 bonded with PU/GAP matrix has good characteristics as PBX,specially in the sensitivity to impact and can be applied for replacing PBXs based on RDX in the advanced PBXs for low sensitive fragmentation warheads.展开更多
(a)NCA polymerization initiated by LiHMDS or other initiators in THF,initiator i)n-hexylamine,ii)HMDS,iii)bipyNi(COD);(b)LiHMDS-initiated open vessel polymerization of BLGNCA at 26 mg and 2 g scale;(c)GPC traces of po...(a)NCA polymerization initiated by LiHMDS or other initiators in THF,initiator i)n-hexylamine,ii)HMDS,iii)bipyNi(COD);(b)LiHMDS-initiated open vessel polymerization of BLGNCA at 26 mg and 2 g scale;(c)GPC traces of poly-BLG at variable DP;(d)Reaction rates of LiHMDS and hexylamine initiated BLGNCA polymerization in THF with NCA:initiator ratio of 100∶1 and initial NCA concentration at 0.2 mol/L;(e)CD spectra of poly-BLG at variable DP prepared from LiHMDS-initiated NCA polymerization.展开更多
Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder ...Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),thermogravimetric and differential-thermogravimetric analysis(TG-DTA) and energy dispersive X-ray spectrometry(EDS) techniques,showing uniform nanowire shape of LiFePO4/C with a diameter of 80-150 nm and a length of several microns.The heat-treated LiFePO4/C nanowires show excellent electrochemical properties of specific discharge capacity,rate capacity and cycling stability.In particular,the LiFePO4/C nanowires heat-treated at 400 °C show preferable first discharge specific capacity of 161 mA·h/g at 0.1C rate,while the voltage platform is 3.4 V and the first discharge specific capacity is 93 mA·h/g at 20C rate.The specific capacity retention is 98% after 50 cycles at 5C rate.展开更多
Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this...Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this review.Various fabrication methods of these oxides are introduced in detail,and their advantages and disadvantages are analyzed.Different preparation methods adopted have great influence on the morphologies and physicochemical properties of perovskite-type oxides.As a bifunctional electrocatalyst,perovskite-type oxides are widely used in rechargeable metal-air batteries.The relationship between the preparation methods and the performances of oxygen/air electrodes are summarized.This work is concentrated on the structural stability,the phase compositions,and catalytic performance of perovskite-type oxides in oxygen/air electrodes.The main problems existing in the practical application of perovskite-type oxides as bifunctional electrocatalysts are pointed out and possible research directions in the future are recommended.展开更多
The preparation of X-zeolite powder was investigated in hydrothermal system, the crystal growth process of X-zeolite in hydrothermal condition was characterized by means of X-ray diffraction, scanning electron microsc...The preparation of X-zeolite powder was investigated in hydrothermal system, the crystal growth process of X-zeolite in hydrothermal condition was characterized by means of X-ray diffraction, scanning electron microscope and infrared ray. The results show that X-zeolite powder with uniform granularity and intact crystal shape can be obtained in hydrothermal system of acid-treated stellerite KG-*5CD*2KG-*9NaOHKG-*5CD*2KG-*9NaAl（OH）4KG-*5CD*2KG-*9H2O; the crystallite size is in the range of 2CD*23μm. The best reaction time of hydrothermal preparation is 6h. The formation phases of X-zeolite crystal are as follows: dissolution of feedstocks → formation of [SiO4] 4- and [AlO4] 5- tetrahedron, many-membered ring, β cage → formation of crystal nucleus and nano-particle → aggregation growth of nano-particle → coalescence growth of crystallite. The crystal habits of X-zeolite are intimately related with crystallization orientation of β cage in crystal and with its coupling stability on every crystal face family.展开更多
Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuously followed by filtration as raw materials with a molar ratio of 1∶1 of MgCl2 to NH4Cl, ammonium carnallite was synth...Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuously followed by filtration as raw materials with a molar ratio of 1∶1 of MgCl2 to NH4Cl, ammonium carnallite was synthesized. And then the ammonium carnallite was dehydrated to some extent at 160℃ for 4 h. Ammonium carnallite reacted with ammonia at 240℃ for 150 min and the ammonation ammonium carnallite was produced. Finally, the ammonation ammonium carnallite was calcined at 750℃ into anhydrous magnesium chloride containing only 0.1%（mass fraction） of MgO. On the other hand, dehydrated ammonium carnallite was mixed with the solid ammonium chloride at mass ratio 1∶4 at high temperature and with the differential pressure of NH3 above 30.5kPa. The dehydrated ammonium carnallite of mixture was dehydrated at 410℃, and then calcined at 700℃ into anhydrous magnesium chloride with only 0.087%（mass fraction） of MgO. X-ray diffraction and electron microscopy analysis results prove that anhydrous magnesium chloride obtained by both methods hasn’t mixed phases, the particle is large and even has good dispersion, which is suitable for preparation of metal magnesium in the electrolysis.展开更多
Preparation of TiO<sub>2</sub> thin films by MOCVD method is presented in this paper. A MOCVD system has been designed and built. A wide range of processing conditions are investigated to deposit TiO<su...Preparation of TiO<sub>2</sub> thin films by MOCVD method is presented in this paper. A MOCVD system has been designed and built. A wide range of processing conditions are investigated to deposit TiO<sub>2</sub> films on Si wafers starting from metal-organic precursor tetrabutyl titanate. Activation energy of the film formation （E） is obtained to be 23.6 kJ/mol. Structure of films is pure anatase when deposit temperatures are low, rutile forms at 700℃. The films also exhibit preferred crystallographic orientations which strongly depend on deposit conditions. Refractive index increases with increasing of film thickness and decreasing of deposit temperature.展开更多
Large and uniform tetrapod-like ZnO whiskers （T-ZnO） were prepared from waste hot dipping zinc by vapor oxidation and examined by means of X-ray diffraction and ICP-AES analysis and scanning electron microscope. The...Large and uniform tetrapod-like ZnO whiskers （T-ZnO） were prepared from waste hot dipping zinc by vapor oxidation and examined by means of X-ray diffraction and ICP-AES analysis and scanning electron microscope. The products are pure hexagonal wurtzite crystals with tetrapod shape and edge size of center body 56 μm and needle length of 100130 μm. The size and shape of ZnO particles are fully controlled by the growth conditions and T-ZnO can be obtained only at 8501 000 ℃ and total gas flow rate ranging from 40 to 250 L·h-1 in which the size of the T-ZnO particles varies slightly with temperature. The process of the formation of T-ZnO is that T-ZnO may nucleate at the initial stage with a complete tetrapod shape and develop to the large size, but not the process of （preferential） growth of octahedral nuclei and subsequent growth of the needles. The experiment presents a new method to prepare T-ZnO economically by using the waste hot dipping zinc.展开更多
Rice is a typical silicon-loving crop,known as"representative of silicic acid plant".Southeast Asia and other rice-producing countries have listed silicon fertilizer as the fourth most elemental fertilizer a...Rice is a typical silicon-loving crop,known as"representative of silicic acid plant".Southeast Asia and other rice-producing countries have listed silicon fertilizer as the fourth most elemental fertilizer after nitrogen,phosphorus and potassium.Therefore,improving the utilization of soil silicon and promoting the transformation of soil silicon form is of great significance to the growth of rice and the development of agriculture.In order to investigate the effects of silicon preparations on different forms of silicon in soil and silicon contenst in rice plants,a pot experiment with Dongnong 427 was carried out,spraying on rice leaves at the booting stage,and three treatment groups(Si-TG,Si-EG and Si-60G)and a control group(CK)were set up.The contents of available silicon,water-soluble silicon,amorphous silicon,active silicon in soil and plant silicon were measured at the heading stage and the maturity stage of rice,then the effect of silicon preparation on the silicon content of rice soil and plant was analyzed.The results showed that spraying silicon preparation could significantly improve the silicon content of rice plants,promote the transformation of silicon forms in soil to varying degrees,and improve the silicon supply capacity of soil.Compared with CK,the soil available silicon content increased by 7.42%-8.26%at the heading stage and 6.70%at the maturity stage.The Si-EG treatment at the heading stage had the best effect on increasing the available silicon content of the soil,which was 8.26%higher than that of CK,reaching a significant level;the Si-TG treatment at the maturity stage had the best effect on increasing the silicon content of the plant,and the silicon content of the plant was 27.17%higher than that of CK,reaching a significant level.展开更多
With citric acid as a polymeric agent layered LiNi0.8Co0.2O2 materials were synthesized by a spray pyrolysis method. The LiNi0.sCo0.2O2 particles were characterized by means of XRD, SEM and TEM. The electrochemical pe...With citric acid as a polymeric agent layered LiNi0.8Co0.2O2 materials were synthesized by a spray pyrolysis method. The LiNi0.sCo0.2O2 particles were characterized by means of XRD, SEM and TEM. The electrochemical performances of LiNi0.8Co0.2O2 particles were studied in a voltage window of 3.00-4.35 V and at a current density of 30 mA/g. The results show that in the pilot-scale spray pyrolysis process, the morphology of particles is dependent upon the precursor concentration and flux of carrier gas. The initial discharge capacity of the LiNi0.8Co0.2O2particles at 720 ℃ for 12 h is 187.3 mA.h/g, and the capacity remains 96.8% with excellent cycleability after 30 cycles. The LiNi0.8Co0.2O2 samples synthesized under the optimized conditions by the spray pyrolysis method shows a good electrochemical performance.展开更多
基金supported by the Natural Science Basic Research Plan in the Shaanxi Province of China(No.2023-JC-ZD-25)Shaanxi Province(Qin ChuangYuan)“Scientist+Engineer”Team Building(No.2022KXJ-040)+1 种基金Shaanxi Provincial Department of Education Key Scientific Research Project(No.22JY024)Science and Technology Guidance Project Plan of China National Textile and Apparel Council(No.2022038,2023018).
文摘With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.
文摘Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.
基金the National Natural Science Foundation of China (Grant No.22105184)Research Fund of SWUST for PhD (Grant No.22zx7175)+1 种基金Sichuan Science and Technology Program (Grant No.2019ZDZX0013)Institute of Chemical Materials Program (Grant No.SXK-2022-03)for financial support。
文摘High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.
基金Supported by the National Natural Science Foundation of China(31340032)。
文摘The rice Dongfu 159 was used for the potting experiment to simulate soil cadmium(Cd)stress,and four silicon preparations,Si-50-G and Si-60-G at a concentration of 0.20%and Si-T-G and Si-E-G at a concentration of 0.50%,were applied at the tillering stage and booting stage of rice,respectively.The cadmium content,root vitality,root malondialdehyde(MDA)content,and antioxidant enzyme activity of each part of rice plants were determined,in order to provide a theoretical reference for exploring the mechanism of silicon fertilizer on the mitigation of Cd-stressed plants.The results showed that under the condition of cadmium stress,silicon application could significantly increase the root vitality and antioxidant enzyme activity,reduce the content of MDA,and reduce the accumulation of cadmium in various parts of rice.The treatment of Si-T-G applied at the tillering stage was the most effective in increasing the root vitality of rice,which was significantly increased by 63.00%compared with the CK.The treatment of Si-50-G applied at the stage of booting was the most effective in reducing MDA content of rice roots,which was significantly reduced by 30.16%compared with the CK.The treatment of Si-60-G applied at the stage of booting was the most effective in increasing the root superoxide dismutase(SOD)activity,which was significantly increased by 39.36%compared with the CK.The treatment of Si-60-G applied at the tillering stage was the most effective in increasing the root peroxidase(POD)and catalase(CAT)activities,which were significantly increased by 64.66%and 51.52%,respectively,compared with the CK.The treatment of Si-T-G applied at the tillering stage was the most effective in reducing Cd content of rice roots,stems and grains,which were significantly reduced by 39.53%,61.19%and 43.41%,respectively,compared with the CK,and the treatment of Si-60-G was the most effective in reducing Cd content of leaves,which was significantly reduced by 53.40%compared with the CK.
基金supported by the National Key R&D Program of China(2020YFA0711502)the National Natural Science Foundation of China(52325202,52202052,52373310)。
文摘The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fabricated a 1D C_(60) polymer crystal via on-site annealing of a millimeter-sized C_(60) molecular crystal withα-Li_(3)N at 500°C and ambient pres�sure.Characterizations show that the C_(60) cages in the crystal have been efficiently connected,forming 1D chains along the<110>direction in an orthorhombic 3D structure.At the same time,the crystal maintains a morphology similar to that of the pristine C_(60)crystal,providing opportunities for characterization of all the facets of the crystal via Raman spectroscopy and thus suggesting the formation mechanism of such crystals.
文摘Gold has been present throughout the history of mankind and used to make jewelry and coins, and recently, acquired several industrial uses. The price of gold in international market had a significant increasing, surpassing 100% in the last five years. Thereby, deposits with low levels of gold content, gold with complex associations or in a very fine particle size became exploitable again, allowing new projects and expansion of existing ones. However, for maximum process efficiency is indispensable a deep knowledge of the characteristics of these minerals and their behavior in face of beneficiation processes. Consequently, an accurate routine for mineralogical and technological characterization is essential.
文摘Hyaluronic acid （HA） had been prepared from pigskin residues with neutral proteinase. The preparing results and conditions were studied. After extracting and purification, HA was detected through ultraviolet spectra and infraction spectrum, and its content and purity were tested by carbazole and Elason-Morgan, respectively. This results indicated that significant quantities of HA could be prepared in fresh pigskin with biologic enzyme, and the pure HA was cosmetic grade and food grade.
文摘A modified wet chemical route for low-temperature synthesis of the calcium stannate CaSnO3, a potentialmaterial for dielectric applications is reported. Firstly, a precursor CaSn(OH)6 was prepared using tin tetrachloride,calcium chloride and sodium hydroxide at room temperature. Then the precursor was annealed at relatively low tem-perature of 600 ℃ to obtain CaSnO3. The phase identification, thermal behavior and surface morphology of the sam-ples were characterized by element analysis, X-ray diffraction (XRD), thermo-gravimetric (TG) analysis and deriva-tive thermo-gravimetric (DTG) analysis, Fourier transform infrared spectroscopy (FTIR) and scanning electron mi-croscopy (SEM) in detail. The results show that CaSnO3 obtained by this method possesses a cubic perovskitestructure with average grain size of 5 μm.
基金Project(2006AA06Z225) supported by the National High-Tech Research and Development Program of China
文摘To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences of polypropylene (PP) fiber on the mechanical properties and volume stability were investigated. The results show that compressive strength of the geopolymer containing 33.3%(mass fraction) fly ash by steam curing at 80 ℃ for 6 d is improved by 35.5%. The 3-day compressive strength, flexural strength and impacting energy of geopolymers containing 0.05%PP fiber increase by 67.8%, 36.1% and 6.25%, while the shrinkage and modulus of compressibility decrease by 38.6% and 31.3%, respectively. The results of scanning electron microscopy (SEM) and the appearances of crack growths confirm that PP fiber can offer a bridging effect over the harmful pores and defects and change the expanding ways of cracks, resulting in a great improvement of strength and toughness.
文摘Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of polyurethane(PU)based on glycidyl azide polymer(GAP) and hydroxyl-terminated polybutadiene(HTPB) as an energetic and inert polymeric binder respectively.Casting technique was used for the preparation of different PBX formulations based on FOX-7/RDX and PU(GAP/HTPB)with 14% binder.The sensitivity to different initial impulses and performance characteristics of the explosive and lethal zone of the tested controlled fragmentation warhead by the fragmentation warhead assessment test(arena test)were studied,in which the arena test was carried out with a controlled fragmentation warhead made from Ck45 steel,with dimensions(100 mm length,30 mm outer diameter and 3 mm thickness).Results show that PBXGF4 has lower sensitivity to impact and heat than those of PBXGR4 by 188.4% and 3.2% respectively.Its friction sensitivity is the same as that of PBXGR4.It has better performance,in which detonation velocity increases by 2.1% and brisance increases by 0.5% when compared with those of PBXGR4.It was concluded that PBXGF4 which based on FOX-7 bonded with PU/GAP matrix has good characteristics as PBX,specially in the sensitivity to impact and can be applied for replacing PBXs based on RDX in the advanced PBXs for low sensitive fragmentation warheads.
文摘(a)NCA polymerization initiated by LiHMDS or other initiators in THF,initiator i)n-hexylamine,ii)HMDS,iii)bipyNi(COD);(b)LiHMDS-initiated open vessel polymerization of BLGNCA at 26 mg and 2 g scale;(c)GPC traces of poly-BLG at variable DP;(d)Reaction rates of LiHMDS and hexylamine initiated BLGNCA polymerization in THF with NCA:initiator ratio of 100∶1 and initial NCA concentration at 0.2 mol/L;(e)CD spectra of poly-BLG at variable DP prepared from LiHMDS-initiated NCA polymerization.
基金Project(51202066)supported by the National Natural Science Foundation of ChinaProject supported by Scientific Research Fund of Hunan Provincial Science and Technology Department,China+1 种基金Project(2013-26)supported by the State Key Program of Jilin University,ChinaProject(2013001)supported by Key Laboratory of Ecological Impacts of Hydraulic-projects and Restoration of Aquatic Ecosystem,Minister of Water Resources,China
文摘Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),thermogravimetric and differential-thermogravimetric analysis(TG-DTA) and energy dispersive X-ray spectrometry(EDS) techniques,showing uniform nanowire shape of LiFePO4/C with a diameter of 80-150 nm and a length of several microns.The heat-treated LiFePO4/C nanowires show excellent electrochemical properties of specific discharge capacity,rate capacity and cycling stability.In particular,the LiFePO4/C nanowires heat-treated at 400 °C show preferable first discharge specific capacity of 161 mA·h/g at 0.1C rate,while the voltage platform is 3.4 V and the first discharge specific capacity is 93 mA·h/g at 20C rate.The specific capacity retention is 98% after 50 cycles at 5C rate.
基金Projects(51504212,21573184,51703061)supported by the National Natural Science Foundation of ChinaProject(2018J01521)supported by the Natural Science Foundation of Fujian Province,ChinaProject(fma2017202)supported by the Open Fund of Fujian Provincial Key Laboratory of Functional Materials and Applications(Xiamen University of Technology),China
文摘Recent advances in the preparation and application of perovskite-type oxides as bifunctional electrocatalysts for oxygen reaction and oxygen evolution reaction in rechargeable metal-air batteries are presented in this review.Various fabrication methods of these oxides are introduced in detail,and their advantages and disadvantages are analyzed.Different preparation methods adopted have great influence on the morphologies and physicochemical properties of perovskite-type oxides.As a bifunctional electrocatalyst,perovskite-type oxides are widely used in rechargeable metal-air batteries.The relationship between the preparation methods and the performances of oxygen/air electrodes are summarized.This work is concentrated on the structural stability,the phase compositions,and catalytic performance of perovskite-type oxides in oxygen/air electrodes.The main problems existing in the practical application of perovskite-type oxides as bifunctional electrocatalysts are pointed out and possible research directions in the future are recommended.
文摘The preparation of X-zeolite powder was investigated in hydrothermal system, the crystal growth process of X-zeolite in hydrothermal condition was characterized by means of X-ray diffraction, scanning electron microscope and infrared ray. The results show that X-zeolite powder with uniform granularity and intact crystal shape can be obtained in hydrothermal system of acid-treated stellerite KG-*5CD*2KG-*9NaOHKG-*5CD*2KG-*9NaAl（OH）4KG-*5CD*2KG-*9H2O; the crystallite size is in the range of 2CD*23μm. The best reaction time of hydrothermal preparation is 6h. The formation phases of X-zeolite crystal are as follows: dissolution of feedstocks → formation of [SiO4] 4- and [AlO4] 5- tetrahedron, many-membered ring, β cage → formation of crystal nucleus and nano-particle → aggregation growth of nano-particle → coalescence growth of crystallite. The crystal habits of X-zeolite are intimately related with crystallization orientation of β cage in crystal and with its coupling stability on every crystal face family.
基金Project(2000 G 101) supported by the Key Science and Technology Research Project of Qinghai Province
文摘Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuously followed by filtration as raw materials with a molar ratio of 1∶1 of MgCl2 to NH4Cl, ammonium carnallite was synthesized. And then the ammonium carnallite was dehydrated to some extent at 160℃ for 4 h. Ammonium carnallite reacted with ammonia at 240℃ for 150 min and the ammonation ammonium carnallite was produced. Finally, the ammonation ammonium carnallite was calcined at 750℃ into anhydrous magnesium chloride containing only 0.1%（mass fraction） of MgO. On the other hand, dehydrated ammonium carnallite was mixed with the solid ammonium chloride at mass ratio 1∶4 at high temperature and with the differential pressure of NH3 above 30.5kPa. The dehydrated ammonium carnallite of mixture was dehydrated at 410℃, and then calcined at 700℃ into anhydrous magnesium chloride with only 0.087%（mass fraction） of MgO. X-ray diffraction and electron microscopy analysis results prove that anhydrous magnesium chloride obtained by both methods hasn’t mixed phases, the particle is large and even has good dispersion, which is suitable for preparation of metal magnesium in the electrolysis.
文摘Preparation of TiO<sub>2</sub> thin films by MOCVD method is presented in this paper. A MOCVD system has been designed and built. A wide range of processing conditions are investigated to deposit TiO<sub>2</sub> films on Si wafers starting from metal-organic precursor tetrabutyl titanate. Activation energy of the film formation （E） is obtained to be 23.6 kJ/mol. Structure of films is pure anatase when deposit temperatures are low, rutile forms at 700℃. The films also exhibit preferred crystallographic orientations which strongly depend on deposit conditions. Refractive index increases with increasing of film thickness and decreasing of deposit temperature.
文摘Large and uniform tetrapod-like ZnO whiskers （T-ZnO） were prepared from waste hot dipping zinc by vapor oxidation and examined by means of X-ray diffraction and ICP-AES analysis and scanning electron microscope. The products are pure hexagonal wurtzite crystals with tetrapod shape and edge size of center body 56 μm and needle length of 100130 μm. The size and shape of ZnO particles are fully controlled by the growth conditions and T-ZnO can be obtained only at 8501 000 ℃ and total gas flow rate ranging from 40 to 250 L·h-1 in which the size of the T-ZnO particles varies slightly with temperature. The process of the formation of T-ZnO is that T-ZnO may nucleate at the initial stage with a complete tetrapod shape and develop to the large size, but not the process of （preferential） growth of octahedral nuclei and subsequent growth of the needles. The experiment presents a new method to prepare T-ZnO economically by using the waste hot dipping zinc.
基金Supported by the New Ideas Team and the Doctoral Research Foundation of Northeast Agricultural University(Topic CXZ003,20082010)the Scientific Research Fund of Heilongjiang Provincial Education Department(11551067)。
文摘Rice is a typical silicon-loving crop,known as"representative of silicic acid plant".Southeast Asia and other rice-producing countries have listed silicon fertilizer as the fourth most elemental fertilizer after nitrogen,phosphorus and potassium.Therefore,improving the utilization of soil silicon and promoting the transformation of soil silicon form is of great significance to the growth of rice and the development of agriculture.In order to investigate the effects of silicon preparations on different forms of silicon in soil and silicon contenst in rice plants,a pot experiment with Dongnong 427 was carried out,spraying on rice leaves at the booting stage,and three treatment groups(Si-TG,Si-EG and Si-60G)and a control group(CK)were set up.The contents of available silicon,water-soluble silicon,amorphous silicon,active silicon in soil and plant silicon were measured at the heading stage and the maturity stage of rice,then the effect of silicon preparation on the silicon content of rice soil and plant was analyzed.The results showed that spraying silicon preparation could significantly improve the silicon content of rice plants,promote the transformation of silicon forms in soil to varying degrees,and improve the silicon supply capacity of soil.Compared with CK,the soil available silicon content increased by 7.42%-8.26%at the heading stage and 6.70%at the maturity stage.The Si-EG treatment at the heading stage had the best effect on increasing the available silicon content of the soil,which was 8.26%higher than that of CK,reaching a significant level;the Si-TG treatment at the maturity stage had the best effect on increasing the silicon content of the plant,and the silicon content of the plant was 27.17%higher than that of CK,reaching a significant level.
基金Project(50604018) supported by the National Natural Science Foundation of China
文摘With citric acid as a polymeric agent layered LiNi0.8Co0.2O2 materials were synthesized by a spray pyrolysis method. The LiNi0.sCo0.2O2 particles were characterized by means of XRD, SEM and TEM. The electrochemical performances of LiNi0.8Co0.2O2 particles were studied in a voltage window of 3.00-4.35 V and at a current density of 30 mA/g. The results show that in the pilot-scale spray pyrolysis process, the morphology of particles is dependent upon the precursor concentration and flux of carrier gas. The initial discharge capacity of the LiNi0.8Co0.2O2particles at 720 ℃ for 12 h is 187.3 mA.h/g, and the capacity remains 96.8% with excellent cycleability after 30 cycles. The LiNi0.8Co0.2O2 samples synthesized under the optimized conditions by the spray pyrolysis method shows a good electrochemical performance.
